Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A Transition from Localized to Strongly Correlated Electron Behavior and Mixed Valence Driven by Physical or Chemical Pressure in ACo2As2 (A = Eu and Ca)

We demonstrate that the action of physical pressure, chemical compression, or aliovalent substitution in ACo(2)As(2) (A = Eu and Ca) has a general consequence of causing these antiferromagnetic materials to become ferromagnets. In all cases, the mixed valence triggered at the electropositive A site results in the increase of the Co 3d density of states at the Fermi level. Remarkably, the dramatic alteration of magnetic behavior results from the very minor (<0.15 eleetron) change in the population of the 3d orbitals. The mixed valence state of En observed in the high-pressure (HP) form of EuCo2As2 exhibits a remarkable stability, achieving the average oxidation state of +2.25 at 12.6 GPa. In the case of CaCo2As2, substituting even 10% of Eu or La into the Ca site causes ferromagnetic ordering of Co moments. Similar to HP-EuCo2As2, the itinerant 3d ferromagnetism emerges from electronic doping into the Co layer because of chemical compression of Eu sites in Ca0.9Eu0.1Co1.91As2 or direct electron doping in Ca0.85La0.15Co1.89As2. The results reported herein demonstrate the general possibility of amplifying minor localized electronic effects to achieve major changes in material's properties via involvement of strongly correlated electrons.

Tan, Xiaoyan↗

Enhanced Thermoelectric Properties for PEDOT:PSS/Undoped Ge Thin-Film Bilayered Heterostructures

Modulation doping is one of the strategies to improve thermoelectric power factors of nanocomposites and thin-film bilayered heterostructures by effectively increasing electrical conductivity. Here, it is reported that thin-film heterostructures of heavily doped p-type organic conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and undoped thin-film Ge can enhance thermoelectric power factor by modulation doping. The maximum power factor and Seebeck coefficient of the bilayered heterostructures are 154 µW m -1 K -2 and 398 µV K -1 , respectively, corresponding to 47-fold and 41-fold increases compared to those of bulk PEDOT:PSS and 64-fold increase compared to power factor of undoped Ge. The enhancements in power factor and Seebeck coefficient are quantitatively described by the hole transfer from PEDOT:PSS to Ge, which takes into account the band alignment at the interface detected by Kraut's method. Agreement between the simulation and experiment results also implies predictability of thermoelectric performances of nanoscale bilayered heterostructures in general, when band offset, Fermi level, and individual electronic properties are available. This work can be further extended to predict performance of other nanoscale combinations of thermoelectric and other electronic materials in general.

charge transport↗

Study of the Thermoelectric Properties of Lead Selenide Doped with Boron, Gallium, Indium, or Thallium

Group IIIA elements (B, Ga, In, and Tl) have been doped into PbSe for enhancement of thermoelectric properties. The electrical conductivity, Seebeck coefficient, and thermal conductivity were systematically studied. Room-temperature Hall measurements showed an effective increase in the electron concentration upon both Ga and In doping and the hole concentration upon Tl doping to 7 × 10{sup 19} cm{sup –3}. No resonant doping phenomenon was observed when PbSe was doped with B, Ga, or In. The highest room-temperature power factor 2.5 × 10{sup –3} W m{sup –1} K{sup –2} was obtained for PbSe doped with 2 atom % B. However, the power factor in B-doped samples decreased with increasing temperature, opposite to the trend for the other dopants. A figure of merit (ZT) of 1.2 at 873 K was achieved in PbSe doped with 0.5 atom % Ga or In. With Tl doping, modification of the band structure around the Fermi level helped to increase the Seebeck coefficient, and the lattice thermal conductivity decreased, probably as a result of effective phonon scattering by both the heavy Tl{sup 3+} ions and the increased grain boundary density after ball milling. The highest p-type ZT value was 1.0 at 723 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mott localization in a pure stripe antiferromagnet Rb 1 - δ Fe 1.5 - σ S 2

A combination of neutron diffraction and angle-resolved photoemission spectroscopy measurements on a pure antiferromagnetic stripe ${\mathrm{Rb}}_{1{-}{\delta}}{\mathrm{Fe}}_{1.5{-}{\sigma}}{\mathrm{S}}_{2}$ is reported here. A neutron diffraction experiment on a powder sample shows that a $98$% volume fraction of the sample is in the antiferromagnetic stripe phase with rhombic iron vacancy order and a refined composition of ${\mathrm{Rb}}_{0.66}{\mathrm{Fe}}_{1.36}{\mathrm{S}}_{2}$, and that only $2$% of the sample is in the block antiferromagnetic phase with $\sqrt{5}\times{}\sqrt{5}$ iron vacancy order. Furthermore, a neutron diffraction experiment on a single crystal shows that there is only a single phase with the stripe antiferromagnetic order with the refined composition of ${\mathrm{Rb}}_{0.78}{\mathrm{Fe}}_{1.35}{\mathrm{S}}_{2}$, while the phase with block antiferromagnetic order is absent. Angle-resolved photoemission spectroscopy measurements on the same crystal with the pure stripe phase reveal that the electronic structure is gapped at the Fermi level with a gap larger than 0.325 eV. The data collectively demonstrate that the extra $10$% iron vacancies in addition to the rhombic iron vacancy order effectively impede the formation of the block antiferromagnetic phase; the data also suggest that the stripe antiferromagnetic phase with rhombic iron vacancy order is a Mott insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Selectivity of Carrier Transport Layers in Wide-Bandgap Perovskite Solar Cells

Excellent contact passivation and selectivity are prerequisites to realize the full potential of high-material-quality perovskite solar cells, first to maximize the internal voltage (or quasi-Fermi-level separation) iV within the absorber, then to translate this high internal voltage into a high external voltage V. Experimental quantification of contact passivation and selectivity is, thus, key to improving device performance. Here, open-circuit measurements of iV oc and V oc , combined with surface photovoltage measurements, are used to systematically quantify the passivation—using iVoc as a metric—and the selectivity—defined as Soc=V oc /iV oc —of a range of common carrier transport layers to wide-bandgap (1.67 eV) perovskite absorbers. The resulting solar cells suffer from large voltage deficits, particularly when NiO x is used as the hole transport layer, even though it provides better passivation than its polymer-based counterparts (PTAA and PTAA/PFN). This indicates a poor selectivity of NiO x (Soc<0.81 for NiO x -based devices), whereas devices using polymer-based hole transport layers exhibit high selectivity (S oc =0.94–0.95). In agreement with recent reports, this low selectivity is attributed to the formation of an interlayer of non-perovskite material with high resistance to holes at the perovskite/NiO x interface. These measurements also imply that the selectivity of the C60-based electron transport layers is relatively good.

carrier transport layers↗

Quantum simulations of excited states with active-space downfolded Hamiltonians

Many-body techniques based on the double unitary coupled cluster ansatz (DUCC) can be used to downfold electronic Hamiltonians into low-dimensional active spaces. It can be shown that the resulting dimensionality reduced Hamiltonians are amenable for quantum computing. Recent studies performed for several benchmark systems using quantum phase estimation (QPE) algorithms demonstrated that these formulations can recover a significant portion of ground-state dynamical correlation effects that stem from the electron excitations outside of the active space. These results have also been confirmed in studies of ground-state potential energy surfaces using quantum simulators. In this letter, we study the effectiveness of the DUCC formalism in describing excited states. We also emphasize the role of the QPE formalism and its stochastic nature in discovering/identifying excited states or excited-state processes in situations when the knowledge about the true configurational structure of a sought after excited state is limited or postulated (due to the specific physics driving excited-state processes of interest). In this context, we can view the QPE algorithm as an engine for verifying various hypotheses for excited-state processes and providing statistically meaningful results that correspond to the electronic state(s) with the largest overlap with a postulated configurational structure. We illustrate these ideas on examples of strongly cor- related molecular systems, characterized by small energy gaps and high density of quasi-degenerate states around the Fermi level.

quantum chemistry, quantum computing, computationa↗

Pressure Dependence of Coherence-Incoherence Crossover Behavior in KFe 2 As 2 Observed by Resistivity and 75 As-NMR/NQR.

We present the results of 75 As nuclear magnetic resonance (NMR), nuclear quadrupole resonance (NQR), and resistivity measurements in KFe 2 As 2 under pressure (p). The temperature dependence of the NMR shift, nuclear spin-lattice relaxation time (T1), and resistivity show a crossover between a high-temperature incoherent, local-moment behavior and a low-temperature coherent behavior at a crossover temperature (T *). T * is found to increase monotonically with pressure, consistent with increasing hybridization between localized 3d orbitalderived bands with the itinerant electron bands. No anomaly in T * is seen at the critical pressure pc = 1.8 GPa where a change of slope of the superconducting (SC) transition temperature Tc(p) has been observed. In contrast, Tc(p) seems to correlate with antiferromagnetic spin fluctuations in the normal state as measured by the NQR 1/T1 data, although such a correlation cannot be seen in the replacement effects of A in the KFe 2 As 2 (A = K, Rb, Cs) family. In the superconducting state, two T1 components are observed at low temperatures, suggesting the existence of two distinct local electronic environments. The temperature dependence of the short T1s indicates a nearly gapless state below Tc. On the other hand, the temperature dependence of the long component 1/T1L implies a large reduction in the density of states at the Fermi level due to the SC gap formation. These results suggest a real-space modulation of the local SC gap structure in KFe 2 As 2 under pressure.

Wiecki, P.↗

Reducing Surface Recombination Velocity of Methylammonium-Free Mixed-Cation Mixed-Halide Perovskites via Surface Passivation

We control surface recombination in the mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3, by passivating nonradiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS). We demonstrate average minority carrier lifetimes >4 µs, nearly single exponential monomolecular photoluminescence decays, and high external photoluminescence quantum efficiencies (>20%, corresponding to ~97% of the maximum theoretical quasi-Fermi-level splitting) at low excitation fluence. We confirm both the composition and valence band edge position of the FA0.83Cs0.17Pb(I0.85Br0.15)3 perovskite using multi-institutional, cross-validated, X-ray photoelectron spectroscopy and UV photoelectron spectroscopy measurements. We extend the APTMS surface passivation to higher bandgap double-cation (FA and Cs) compositions (1.7, 1.75, and 1.8 eV) as well as the widely used triple-cation (FA, MA, and Cs) composition. Finally, we demonstrate that the average surface recombination velocity decreases from ~1000 to ~10 cm/s post APTMS passivation for FA0.83Cs0.17Pb(I0.85Br0.15)3. Our results demonstrate that surface-mediated recombination is the primary nonradiative loss pathway in many methylammonium (MA)-free mixed-cation mixed-halide films with a range of different bandgaps, which is a problem observed for a wide range of perovskite active layers and reactive electrical contacts. Our study also provides insights to develop passivating molecules that help reduce surface recombination in MA-free mixed-cation mixed-halide films and indicates that surface passivation and contact engineering will enable near-theoretical device efficiencies with these materials.

14 SOLAR ENERGY↗

High-Temperature Thermoelectric Properties of the Solid-Solution Zintl Phase Eu 11 Cd 6 Sb 12-x As x (x < 3)

Zintl phases are compounds that have shown promise for thermoelectric applications. The title solid–solution Zintl compounds were prepared from the elements as single crystals using a tin flux for compositions x = 0, 1, 2, and 3. Eu 11 Cd 6 Sb 12–x As x (x < 3) crystallize isostructurally in the centrosymmetric monoclinic space group C2/m (no. 12, Z = 2) as the Sr 11 Cd 6 Sb 12 structure type (Pearson symbol mC58). Efforts to make the As compositions for x exceeding ~3 resulted in structures other than the Sr 11 Cd 6 Sb 12 structure type. Single-crystal X-ray diffraction indicates that As does not randomly substitute for Sb in the structure but is site specific for each composition. The amount of As determined by structural refinement was verified by electron microprobe analysis. Electronic structures and energies calculated for various model structures of Eu 11 Cd 6 Sb 10 As 2 (x = 2) indicated that the preferred As substitution pattern involves a mixture of three of the six pnicogen sites in the asymmetric unit. In addition, As substitution at the Pn4 site opens an energy gap at the Fermi level, whereas substitution at the other five pnicogen sites remains semimetallic with a pseudo gap. Thermoelectric properties of these compounds were measured on hot-pressed, fully densified pellets. Samples show exceptionally low lattice thermal conductivities from room temperature to 775 K: 0.78–0.49 W/mK for x = 0; 0.72–0.53 W/mK for x = 1; and 0.70–0.56 W/mK for x = 2. Eu 11 Cd 6 Sb 12 shows a high p-type Seebeck coefficient (from +118 to 153 μ V/K) but also high electrical resistivity (6.8 to 12.8 mΩ·cm). The value of zT reaches 0.23 at 774 K. The properties of Eu 11 Cd 6 Sb 12–x As x are interpreted in discussion with the As site substitution.

Kazem, Nasrin↗

Mechanisms of Frequency-Dependent Conductivity of Mesoporous Silicon at γ Irradiation with Small Doses

Abstract—The effect of low-dose γ radiation on the mechanisms of low-frequency conductivity of mesoporous silicon has been studied. It has been shown that γ irradiation preserves the hopping character of conductivity at a change of the frequency of phonon lattice vibrations, a decrease in the size of the hop, and a shift of the level of the capture of traps to the Fermi level in the band gap, which makes the structure with mesoporous silicon irradiated by γ radiation promising for the creation of multifunctional resistive and capacitive devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid Development of Hybrid Perovskites and Novel Tandem Architectures

Multijunction solar cells based on epitaxially grown III-V materials hold the record for solar energy power conversion efficiency (PCE). However, due to the high cost of fabricating these devices, they are typically only used for concentrator cells and space applications. The overarching goal of this project was to develop low-cost printable hybrid perovskite (HP) materials appropriate and optimized for tandem solar cells with high power conversion efficiency under “1 Sun” illumination. Key results and findings over the course of the project we: Developed higher-performance high-bandgap (1.75 eV) perovskite materials and devices. In particular, we explored tens-of-thousands of compositions for high bandgap perovskites, achieving quasi-Fermi level splitting of 1.35 eV for a 1.75 eV bandgap material. We achieved World-record open circuit voltages from single junction p-i-n devices, 1.24 V from 1.75 eV bandgap material, which is what is preferable for tandems with a PCE of 14.3% using a guanidinium/formanadinium/ cesium alloyed lead iodobromide. We also developed a series of World-record efficiency devices at higher band-gaps based on 2D/3D perovskites using PEA. Developed higher-performance low-bandgap (1.35 eV) perovskite materials and devices. In particular, we developed a 1.35 eV bandgap perovskite of composition MAPb0.5Sn0.5(I0.8Br0.2)3 and showed its superiority to MAPb0.75Sn0.25I3. High efficiency solar cells were fabricated using PEDOT:PSS and doped-ICBA as HTL and ETL, respectively. Short circuit currents of 25.7 mA/cm2 and PCEs of 17.1% were obtained. Developed mechanically stacked 4-terminal CIGS-Perovskite tandems with PCE of 18.8% and monolithic 2-terminal CIGS-Perovskite tandems with PCE of 8.5%. The low efficiency of the monolithic device is a result of the high surface roughness of the solution processed CIGS bottom cells. This is not an intrinsic problem for CIGS-perovskite tandems, but does mean that smooth evaporated or sputtered CIGS films likely need to be used, unless a polishing step is employed. Developed monolithic 2-terminal Perovskite-Perovskite tandems with a stabilized PCE of 18.5%. This was the World-record perovskite-perovskite monolithic tandems for over a year in 2017-2018. Revealed that light is not an essential component of the so-called “light-induced” phase segregation. By using charge injection in the dark and electroluminescence, we showed that the presence of electrons in the conduction band and hole in the valence band is sufficient to drive the nearly ubiquitously observed phase segregation in high bandgap perovskites. Developed a new method to simultaneously measure absolute intensity photoluminescence and photoconductivity and use them to obtain simultaneous in-situ measurement of quasi-Fermi level splitting and diffusion length. This is important since it provides a proxy for device Voc and device Jsc. In addition, 67 papers were published with support from this award that detail many more advances in the field, including numerous publications in high impact journals such as Nature Photonics, Advanced Materials, ACS Energy Letters, and Energy and Environmental Science.

14 SOLAR ENERGY↗

Shell effects in fission and quasi-fission

Quantum shell effects are responsible for asymmetric fission. They are also expected to affect the formation of fission fragments in quasi-fission reactions occurring in heavy-ion collisions. Shell effects in fission are studied with the single-particle energy level density near the Fermi level. In particular, shell effects in the pre-fragments and their role in fixing the final mass asymmetry of the fission fragments are discussed. Systematic time-dependent Hartree-Fock simulations of heavy-ion collisions show that quasi-fission fragment properties share strong similarities with fragments formed in fission of the compound nuclei. This is an indication that similar shell effects are responsible for the final asymmtery in both mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetotransport properties of the topological nodal-line semimetal CaCdSn

Topological nodal-line semimetals support protected band crossings, which form nodal lines or nodal loops between the valence and conduction bands and exhibit novel transport phenomena. Here we address the topological state of the nodal-line semimetal candidate material CaCdSn, and report magnetotransport properties of its single crystals grown by the self-flux method. In this work, our first-principles calculations show that the electronic structure of CaCdSn harbors a single nodal loop around the Γ point in the absence of spin-orbit coupling effects. The nodal crossings in CaCdSn are found to lie above the Fermi level and yield a Fermi surface that consists of both electron and hole pockets. CaCdSn exhibits high mobility (μ ≈ 3.44 × 10 4 cm 2 V –1 s –1 ) and displays a field-induced metal-semiconductor-like crossover with a plateau in resistivity at low temperature. We observe an extremely large and quasilinear nonsaturating transverse as well as longitudinal magnetoresistance (MR) at low temperatures (≈ 7.44 × 10 3 % and ≈ 1.71 × 10 3 %, respectively, at 4 K). We also briefly discuss possible reasons behind such a large quasilinear magnetoresistance and its connection with the nontrivial band structure of CaCdSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of a Hole-Doped Mott Insulator on a Triangular Silicon Lattice

The physics of doped Mott insulators is at the heart of some of the most exotic physical phenomena in materials research including insulator-metal transitions, colossal magnetoresistance, and high-temperature superconductivity in layered perovskite compounds. Advances in this field would greatly benefit from the availability of new material systems with a similar richness of physical phenomena but with fewer chemical and structural complications in comparison to oxides. In this paper, using scanning tunneling microscopy and spectroscopy, we show that such a system can be realized on a silicon platform. The adsorption of one-third monolayer of Sn atoms on a Si(111) surface produces a triangular surface lattice with half filled dangling bond orbitals. Modulation hole doping of these dangling bonds unveils clear hallmarks of Mott physics, such as spectral weight transfer and the formation of quasiparticle states at the Fermi level, well-defined Fermi contour segments, and a sharp singularity in the density of states. These observations are remarkably similar to those made in complex oxide materials, including high-temperature superconductors, but highly extraordinary within the realm of conventional $sp$-bonded semiconductor materials. Finally, it suggests that exotic quantum matter phases can be realized and engineered on silicon-based materials platforms.

36 MATERIALS SCIENCE↗

Mechanism of AC charge transport in TlSb{sub 1–x}Ga{sub x}S{sub 2} (x = 0 and 0.03)

The dielectric properties and ac electrical conductivity of TlSb{sub 1–x}Ga{sub x}S{sub 2} (x = 0, 0.03) single-crystals have been measured in the frequency range 5 × 10{sup 4} to 3.5 × 10{sup 7} Hz. Experimental data on the frequency dispersion of the dielectric coefficients and electrical conductivity of the TlSb{sub 1–x}Ga{sub x}S{sub 2} (x = 0, 0.03) single crystals have allowed us to identify the nature of the dielectric loss and the mechanism of charge transport and evaluate parameters of localized states in the band gap. The incorporation of gallium atoms into the crystal lattice of TlSbS{sub 2} crystals has been shown to lead to an increase in the Fermi-level density of states and mean hop time and distance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium Substitution Effect on the Topological Crystalline Insulator Family (Pb 1$-$x Sn x )1 $-$y InyTe: Topological and Superconducting Properties

Topological crystalline insulators (TCIs) have been of great interest in the area of condensed matter physics. We investigated the effect of indium substitution on the crystal structure and transport properties in the TCI system (Pb 1-x Sn x ) 1-y In y Te. For samples with a tin concentration x ≤ 50% , the low-temperature resisitivities show a dramatic variation as a function of indium concentration: with up to ~2% indium doping, the samples show weak-metallic behavior similar to their parent compounds; with `6% indium doping, samples have true bulk-insulating resistivity and present evidence for nontrivial topological surface states; with higher indium doping levels, superconductivity was observed, with a transition temperature, T c , positively correlated to the indium concentration and reaching as high as 4.7 K. We address this issue from the view of bulk electronic structure modified by the indium-induced impurity level that pins the Fermi level. The current work summarizes the indium substitution effect on (Pb,Sn)Te, and discusses the topological and superconducting aspects, which can be provide guidance for future studies on this and related systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure of Optimally Doped Pnictide Ba0.6K0.4Fe2As2: A Comprehensive Angle-resolved Photoemission Spectroscopy Investigation

The electronic structure of the Fe-based superconductor Ba{sub 0.6}K{sub 0.4}Fe{sub 2}As{sub 2} is studied by means of angle-resolved photoemission. We identify dispersive bands crossing the Fermi level forming hole-like (electron-like) Fermi surfaces (FSs) around {Lambda} (M) with nearly nested FS pockets connected by the antiferromagnetic wavevector. Compared to band structure calculation findings, the overall bandwidth is reduced by a factor of 2 and the low energy dispersions display even stronger mass renormalization. Using an effective tight banding model, we fitted the band structure and the FSs to obtain band parameters reliable for theoretical modeling and calculation of physical quantities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗