Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Corn and Switchgrass Derived Sustainable Aviation Fuel Carbon Intensity

The production and use of sustainable aviation fuel (SAF) could lower aviation's carbon footprint. Feedstock agricultural management can optimize—or potentially determine—SAF sustainability and profitability, but long-term SAF feedstock comparisons are limited. Life cycle assessments (LCA) are commonly used to estimate the carbon intensity of producing SAF from emerging feedstocks due to the limited availability of long-term, primary field data. We quantified the agricultural phase and well-to-wake (WTWa) carbon intensities of producing SAF from no-till, continuous corn (Zea mays L.) under 120 kg N ha−1 year−1 (120 N corn) and switchgrass (Panicum virgatum L.) under 60 or 120 kg N ha−1 year−1 (60 N and 120 N SWG, respectively) via LCAs based on measured data from a long-term (1998-present) field experiment on marginally productive cropland located in Eastern NE, USA. Measured data included crop productivity, long-term changes in soil organic carbon (SOC) stocks (0–150 cm), annual soil N2O emissions, and field management practices. Both 120 N corn (2078 L ha−1) and 120 N SWG (1752 L ha−1) produced more SAF than 60 N SWG (1229 L ha−1) (p < 0.0001). However, making SAF from corn had greater life cycle GHG emissions (i.e., WTWa carbon intensity) than making SAF from 120 N and 60 N SWG (61.5 > −14.5 and −27.5 g CO2e MJ−1 SAF, respectively; p = 0.0007), primarily due to SOC accrual during crop production. Here, we demonstrate that agricultural management (e.g., crop type, fertilizer use) can determine the sustainably and productivity of producing SAF by using long-term, measured field data in LCAs.

carbon intensity↗

Electric fields in the dayside auroral oval

The results from four independent electric field experiments flown on three Black Brant 4 rockets in the forenoon dayside auroral oval in December 1974 and January 1975 are correlated with ground-based observations and rocket particle data. The electric field varied from zero to 150 mV/m. The predominant plasma convection was toward noon along the auroral oval with a smaller component directed toward the polar cap. In one case, however, a reversal occurred within the oval with plasma convection away from noon. Comparisons with magnetometer data indicate that in the dayside auroral oval, Hall currents sometimes are responsible for magnetic fluctuations observed on the ground. Comparisons with particle data show that the magnitude of the electric fields is inversely correlated with the electron energy flux.

Jorgensen, T. S.↗

Large amplitude wave packets observed in the ionosphere in association with transverse ion acceleration

Very short duration, large amplitude bursts of monochromatic waves ('spikelets') were detected by the electric field experiment on the sounding rocket MARIE, launched in February 1985 from Churchill, Manitoba. About 35 events were detected, with an average time scale of 5 ms and an average amplitude of 100-150 mV/m. Their frequency varied between 7 and 18 kHz, and there is some evidence that the frequency is a decreasing function of altitude. The bursts are not correlated with any events on the payload, and their occurrence is not related to the rocket's spin or coning. The events were confined to the altitude range 450-650 kilometers. This coincides exactly with the altitude range for which perpendicular (90 deg) ion conics were detected by the particle experiment on the same payload. The 'spikelets' were also correlated one-to-one with small (10-100 mV/m) double-layerlike or shocklike features of similar time scale in the dc electric field data.

Labelle, J.↗

Bulk Surface Momentum Parameters for Satellite-Derived Vegetation Fields

The bulk aerodynamic parameters associated with the absorption of surface momentum by vegetated landscapes are theoretically estimated within the context of Raupach's roughness sublayer formulation. The parameters include the bulk plant drag coefficient, maximum u*/U(sub h), sheltering coefficient, and canopy area density at onset of sheltering. Parameters are estimated for the four principal IGBP land cover classes within the U.S. Southern Great Plains: evergreen needleleaf forests, grasslands, croplands, and open shrublands. The estimation approach applies the Method of Moments to roughness data from several international field experiments and other published sources. The results provide the necessary land surface parameters for satellite-based estimation of momentum aerodynamic roughness length and zero-plane displacement height for seasonally variable vegetation fields employed in most terrestrial and atmospheric simulation models used today. Construction of sample displacement and roughness maps over the Southern United States using MODIS land products demonstrates the potential of this approach for regional to global applications.

Jasinski, Michael F.↗

Detection techniques for tenuous planetary atmospheres

Electrostatic charging of dust and its effect on planetary atmospheres is discussed, along with its applications to Martian atmosphere. Laboratory and field experiments in dust storms indicate that the major atmospheric parameters on Mars include: (1) pressure, temperature, and relative humidity; (2) wind velocity and direction; (3) particulate size and composition; and (4) electrostatic charge and field gradient. Various instrumentation techniques adapted for a Mars Lander are briefly reviewed. The effect of exoelectron emission on surface catalysis is studied.

Hoenig, S. A.↗

Powder agglomeration in a microgravity environment

This is the final report for NASA Grant NAG3-755 entitled 'Powder Agglomeration in a Microgravity Environment.' The research program included both two types of numerical models and two types of experiments. The numerical modeling included the use of Monte Carlo type simulations of agglomerate growth including hydrodynamic screening and molecular dynamics type simulations of the rearrangement of particles within an agglomerate under a gravitational field. Experiments included direct observation of the agglomeration of submicron alumina and indirect observation, using small angle light scattering, of the agglomeration of colloidal silica and aluminum monohydroxide. In the former class of experiments, the powders were constrained to move on a two-dimensional surface oriented to minimize the effect of gravity. In the latter, some experiments involved mixture of suspensions containing particles of opposite charge which resulted in agglomeration on a very short time scale relative to settling under gravity.

Cawley, James D.↗

SeaWiFS Calibration and Algorithm Validation

This is the fourth annual report on NASA grant NAGW 3543, titled 'Sea-viewing Wide Field of view Sensor (SeaWiFS) calibration and algorithm validation'. An extended field experiment was conducted at Lake Tahoe in late July 1996 that involved: experimental verification of radiative transfer computations for various viewing geometries; retrieval of an effective aerosol optical depth height; calibration of a large field of view (FOV) sensor; and an evaluation of spatial non-uniformities in surface reflectance. The investigation and development of novel methods for the calibration of field radiometers at a variety of signal levels has been continued during the past year.

Parada, Robert J., Jr.↗

Studying marine stratus with large eddy simulation

Data sets from field experiments over the stratocumulus regime may include complications from larger scale variations, decoupled cloud layers, diurnal cycle, or entrainment instability, etc. On top of the already complicated turbulence-radiation-condensation processes within the cloud-topped boundary layer (CTBL), these complexities may sometimes make interpretation of the data sets difficult. To study these processes, a better understanding is needed of the basic processes involved in the prototype CTBL. For example, is cloud top radiative cooling the primary source of the turbulent kinetic energy (TKE) within the CTBL. Historically, laboratory measurements have played an important role in addressing the turbulence problems. The CTBL is a turbulent field which is probably impossible to generate in laboratories. Large eddy simulation (LES) is an alternative way of 'measuring' the turbulent structure under controlled environments, which allows the systematic examination of the basic physical processes involved. However, there are problems with the LES approach for the CTBL. The LES data need to be consistent with the observed data. The LES approach is discussed, and results are given which provide some insights into the simulated turbulent flow field. Problems with this approach for the CTBL and information from the FIRE experiment needed to justify the LES results are discussed.

Moeng, Chin-Hoh↗

Magnetic field observations near Mercury: Preliminary results from Mariner 10

Results are presented from a preliminary analysis of data obtained near Mercury by the NASA/GSFC Magnetic Field Experiment on Mariner 10. A very well developed, detached bow shock wave, which developed as the super-Alfvenic solar wind interacted with the planet Mercury was observed. A magnetosphere-like region, with maximum field strength of 98 gamma at closest approach (704 km altitude) was also observed, and was contained within boundaries similar to the terrestrial magnetopause. The obstacle deflecting the solar wind flow was global in size, but the origin of the enhanced magnetic field was not established. The most plausible explanation, considering the complete body of data, favored the conclusion that Mercury has an intrinsic magnetic field.

Ness, N. F.↗

Photovoltaic module reliability improvement through application testing and failure analysis

During the first four years of the U.S. Department of Energy (DOE) National Photovoltatic Program, the Jet Propulsion Laboratory Low-Cost Solar Array (LSA) Project purchased about 400 kW of photovoltaic modules for test and experiments. In order to identify, report, and analyze test and operational problems with the Block Procurement modules, a problem/failure reporting and analysis system was implemented by the LSA Project with the main purpose of providing manufacturers with feedback from test and field experience needed for the improvement of product performance and reliability. A description of the more significant types of failures is presented, taking into account interconnects, cracked cells, dielectric breakdown, delamination, and corrosion. Current design practices and reliability evaluations are also discussed. The conducted evaluation indicates that current module designs incorporate damage-resistant and fault-tolerant features which address field failure mechanisms observed to date.

Dumas, L. N.↗

Integrating and Visualizing Tropical Cyclone Data Using the Real Time Mission Monitor

The Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the NASA Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery, radar, surface and airborne instrument data sets, model output parameters, lightning location observations, aircraft navigation data, soundings, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. RTMM is extremely valuable for optimizing individual Earth science airborne field experiments. Flight planners, scientists, and managers appreciate the contributions that RTMM makes to their flight projects. A broad spectrum of interdisciplinary scientists used RTMM during field campaigns including the hurricane-focused 2006 NASA African Monsoon Multidisciplinary Analyses (NAMMA), 2007 NOAA-NASA Aerosonde Hurricane Noel flight, 2007 Tropical Composition, Cloud, and Climate Coupling (TC4), plus a soil moisture (SMAP-VEX) and two arctic research experiments (ARCTAS) in 2008. Improving and evolving RTMM is a continuous process. RTMM recently integrated the Waypoint Planning Tool, a Java-based application that enables aircraft mission scientists to easily develop a pre-mission flight plan through an interactive point-and-click interface. Individual flight legs are automatically calculated "on the fly". The resultant flight plan is then immediately posted to the Google Earth-based RTMM for interested scientists to view the planned flight track and subsequently compare it to the actual real time flight progress. We are planning additional capabilities to RTMM including collaborations with the Jet Propulsion Laboratory in the joint development of a Tropical Cyclone Integrated Data Exchange and Analysis System (TC IDEAS) which will serve as a web portal for access to tropical cyclone data, visualizations and model output.

Goodman, H. Michael↗

Behavior and mechanisms of Doppler wind lidar error in complex terrain: stable flow case study at Perdigão

A numerical experiment is carried out investigating the magnitude of biases in ground-based lidar measurements in complex flow conditions. Biases assessed include those arising from flow curvature and from the interaction of turbulence with the wind field reconstruction (WFR) algorithms used by a WindCube lidars and anemometers. RANS-CFD and WRF-LES simulations were performed for the Perdig˜ao Field Experiment site for a range of atmospheric conditions. Virtual anemometer and lidar data were generated for four locations: two near exposed ridge tops and two in low-speed regions in the valley. The LES data at these four locations show that the scalar inflation terms (the relation between scalar and vector averaged wind speed) for virtual lidar and virtual cups agree very well with predictions using perturbation theory. While the lidar errors vary greatly with location and height, the contribution from the flow curvature tends to be larger than the differences arising from scalar inflation. For one lidar/mast pair near the ridge top, comparisons between simulations and measurements are carried out for a resonant mountain wave event on June 14th, 2017, and for the whole duration of the Perdigão campaign for winds perpendicular to the ridges. The lidar error during the mountain wave, a period of strong stability and low inversion height, is significantly larger than the campaign average. The sensitivity of the lidar error to atmospheric stability is confirmed by the RANS simulations, which suggests strong sensitivity of flow curvature error to stability conditions and to the shape of the wind speed profile near the top of the boundary layer.

17 WIND ENERGY↗

Monoenergetic neutron scattering on 238 U at Triangle Universities Nuclear Laboratory

In this report, we summarize the progress made in FY23 for experiments fielded at Triangle Universities Nuclear Laboratory (TUNL) of Duke University on the neutron scattering measurements of 238 U. The preliminary results on the elastic and inelastic reaction channels will be presented in addition to details of experiment and data analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimization of multimagnetometer systems on a spacecraft

Magnetometers on a radial boom may be employed to determine the first N-1 multipole contributions to the spacecraft field and improve the total accuracy of a magnetic field experiment. The total error for systems of one to four magnetometers is investigated. The optimal magnetometer locations, for which the total error is a minimum, are found for given boom-length, instrument errors and magnetic field models characteristic for spacecraft with only a restricted or ineffective magnetic cleanliness program.

Neubauer, F. M.↗

LASE Measurements of Water Vapor, Aerosol, and Cloud Distributions in Saharan Air Layers and Tropical Disturbances

LASE (Lidar Atmospheric Sensing Experiment) on-board the NASA DC-8 measured high resolution profiles of water vapor and aerosols, and cloud distributions in 14 flights over the eastern North Atlantic during the NAMMA (NASA African Monsoon Multidisciplinary Analyses) field experiment. These measurements were used to study African easterly waves (AEWs), tropical cyclones (TCs), and the Saharan Air Layer(s) (SAL). Interactions between the SAL and tropical air were observed during the early stages of the TC development. These LASE measurements represent the first simultaneous water vapor and aerosol lidar measurements to study the SAL and its impact on AEWs and TCs. Examples of profile measurements of aerosol scattering ratios, aerosol extinction coefficients, aerosol optical thickness, water vapor mixing ratios, RH, and temperature are presented to illustrate their characteristics in SAL, convection, and clear air regions. LASE data suggest that the SAL suppresses low-altitude convection at the convection-SAL interface region. Mid-level convection associated with the AEW and transport are likely responsible for high water vapor content observed in the southern regions of the SAL on August 20, 2008. This interaction is responsible for the transfer of about 7 x 10(exp 15) J latent heat energy within a day to the SAL. Measurements of lidar extinction-to-backscatter ratios in the range 36+/-5 to 45+/-5 are within the range of measurements from other lidar measurements of dust. LASE aerosol extinction and water vapor profiles are validated by comparison with onboard in situ aerosol measurements and GPS dropsonde water vapor soundings, respectively.

Ismail, Syed↗

The Algorithm Theoretical Basis Document for the GLAS Atmospheric Data Products

The purpose of this document is to present a detailed description of the algorithm theoretical basis for each of the GLAS data products. This will be the final version of this document. The algorithms were initially designed and written based on the authors prior experience with high altitude lidar data on systems such as the Cloud and Aerosol Lidar System (CALS) and the Cloud Physics Lidar (CPL), both of which fly on the NASA ER-2 high altitude aircraft. These lidar systems have been employed in many field experiments around the world and algorithms have been developed to analyze these data for a number of atmospheric parameters. CALS data have been analyzed for cloud top height, thin cloud optical depth, cirrus cloud emittance (Spinhirne and Hart, 1990) and boundary layer depth (Palm and Spinhirne, 1987, 1998). The successor to CALS, the CPL, has also been extensively deployed in field missions since 2000 including the validation of GLAS and CALIPSO. The CALS and early CPL data sets also served as the basis for the construction of simulated GLAS data sets which were then used to develop and test the GLAS analysis algorithms.

Palm, Stephen P.↗

SMART: Simplified Melting And Rotation-joint Technology

Oil based parabolic trough solar power plants are the most commercially mature CSP technology. However, the upper limit of about 400°C of the current organic heat transfer fluid(HTF)significantly limits the future potential of the technology. Advances in parabolic trough receiver and collector technology have enabled higher operating temperatures of potentially 500°C or above. The search for an improved higher temperature HTF has identified inorganic molten salts, specifically the mix referred to as Solar Salt, a 60:40 mix of sodium nitrate and potassium nitrate salt. However, Solar Salt starts to freeze at about 240°C. This poses a significant challenge for large parabolic trough plants that could have many kilometers of header piping and hundreds of kilometers of receiver piping all filled with molten salt. Plants using molten salt need to be designed to minimize the risk of freezing and to be able to recover from freeze events. Studies and field experiments have shown that this appears to be feasible and the approach appears to have strong economic advantages over conventional trough plants. However, some technical challenges remain related to the use of molten salt in trough solar fields, the cost of the freeze recovery system is significant, and many still question whether the risk of using molten salt is worth the economic upside. In our view, the potential economic upside justifies the continued look at molten salt HTF in parabolic trough plants. The objective of this project was to address the key technical issue remaining, look for opportunities to reduce the cost of the freeze recovery system, and improve the general information and tools available for assessing the design, performance and economics of trough plants using molten salt HTF.

14 SOLAR ENERGY↗

Structure and Evolution of an Oceanic Squall Line During South China Sea Monsoon Experiment

The South China Sea Monsoon Experiment (SCSMEX) was conducted in South China Sea (SCS) and surrounding areas during May - June 1998. The primary goal of the experiment is to provide a better understanding of the key physical processes for the onset, maintenance and variability of the monsoon over the Southeast Asia and southern China leading to improved monsoon predictions. As the first comprehensive field experiment aiming on the SCS summer monsoon, the goals of the mesoscale program associated with the primary objective are: (1) to define the initiation, structure, evolution and dynamics of precipitation processes associated with the onset and mature phase of the SCS monsoon, and (2) to obtain quantitative rainfall estimates, vertical air motion and inferences on microphysical structure over a tropical oceanic site.

Wang, Jian-Jian↗