Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel cladding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Small-Angle Neutron Scattering Measurements of the δ Deuteride Phase in Zircaloy 4

Hydrogen pickup by Zr-based LWR fuel cladding during service leads to the formation of circumferential hydride platelet particles embedded within the Zr matrix. The precipitation of the hydride phase occurs preferentially on the water-side due to the temperature gradient within the clad wall. The non-uniform hydride morphology is known as a rim structure. Significant tensile hoop stresses within the clad wall develop during the fuel lifetime due to fission gas release and pellet-clad mechanical interaction. One potential post-service cladding failure mechanism is delayed hydride cracking (DHC) initiated by hydride reorientation under this tensile hoop stress. As a consequence, hydride reorientation and DHC have been extensively studied over the last few decades to understand the interdependencies of tensile stress, temperature, hydride morphology, and hydrogen concentration. Much of the most recent work in this area has taken advantage of 3. generation synchrotron X-ray sources to perform in situ measurements of hydride phase stability. Neutron scattering based techniques offer unique advantages in the study of hydrogen in metals (typically with deuterium substituted for hydrogen) but are under utilized in the study of hydrides in Zr. We present small-angle neutron scattering (SANS) measurements of the deuteride phase in Zircaloy 4 (Zy4) here. The SANS measurements presented here demonstrate the sensitivity of the technique to deuteride phase particles embedded in a Zy4 matrix. Quantifiable net scattering at 50 wppm effective hydrogen concentration is derived from a subtraction of a reference sample. This demonstrates that the strong χ phase Porod scattering can be effectively eliminated, revealing the response from the deuteride phase. A similar experimental protocol using small-angle X-ray scattering (SAXS) would likely fail due to poor contrast between the hydride phase and the Zr matrix. Stated in different terms, the SAXS response would be dominated by SPP Porod scattering with unresolvable net scattering from hydride particles. (authors)

36 MATERIALS SCIENCE↗

Overview of Aluminum Oxide Prediction Models for High Power Research Reactors

UMo/Al dispersion fuel clad with aluminum alloy cladding is a primary candidate fuel form that is being developed for high power research and test reactors including European high power research reactors (EUHPRR). Oxidation of cladding is considerable due to high power application. One of the objectives of this report is to review the existing oxide prediction models and heat transfer correlations at cladding surface.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status Report on Irradiation Capsules Designed to Evaluate FeCrAl-UO 2 Interactions

This status report provides the background and current status of a series of irradiation capsules that were designed and are being built to test the interactions between candidate FeCrAl cladding for enhanced accident tolerant applications and prototypical enriched commercial UO 2 fuel in a neutron radiation environment. These capsules will test the degree, if any, of fuel cladding chemical interactions (FCCI) between FeCrAl and UO 2 . The capsules are to be irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory to burn-ups of 10, 30, and 50 GWd/MT with a nominal target temperature at the interfaces between the pellets and clad of 350°C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Visual Examination of Aluminum Containers for Extended Wet Storage of Non-Aluminum-Clad Spent Nuclear Fuel (FY 2021)

The goal of the Augmented Monitoring and Condition Assessment Program (AMCAP) program is to provide a condition assessment of the storage containers for non-aluminum-clad spent nuclear fuel (NASNF) in L Basin and demonstrate continued safe storage of all NASNF pending retrieval for ultimate disposition. The storage configuration of NASNF is vulnerable to inside-out corrosion attack. The approach being used in AMCAP is to develop and deploy examination methods for remote, in-situ inspection of the bundle storage in VTS and for OSC storage in the OSC racks. A method for Visual Examination (VE) using video-recording cameras was readied as part of the full-scale mockup development, and was deployed in L Basin for the initial condition assessment work. This report describes the development and the deployment of the VE for inspection of selected bundles in L Basin. The first deployment of the VE system was for visually examining five spent fuel bundles. Bundles were chosen based on their vulnerability in terms of inner fuel contents, history, storage duration, storage configuration, and possibility of inside out corrosion due to galvanic coupling of fuel cladding with the aluminum bundle wall.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel performance evaluation of annular metallic fuels for an advanced fast reactor concept

The annular metallic fuel design has been considered as a promising solution to relieve the fuel-cladding mechanical interaction (FCMI) caused by significant swelling of metallic fuels at high burnup. In this paper, the fuel performance of annular metallic fuel with HT9 cladding in a novel advanced fast reactor design optimized for high-burnup performance was evaluated. The BISON code was utilized to perform fuel performance simulations using a modified fuel swelling correlation for conservative evaluation. Three representative fuel pins, which feature highest peak burnup (26.8 % FIMA, fission per initial metal atom), highest fuel temperature (645 degrees C), and highest fast neutron flux (2.68 x 10 15 n/cm 2 ∙s), were investigated. A series of key fuel performance parameters, such as peak fuel temperature, reduction of fuel central void, and cumulative damage fraction (CDF) of the cladding, were predicted for both upper and lower plenum configurations. It is evident that annular fuel design with a lower smeared density is capable of accommodating the significant swelling of metallic fuel at high burnup. Finally, the adoption of a lower plenum configuration effectively lowers the gas pressure inside the rod and reduces the creep damage accumulation in the HT9 cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

OVERVIEW OF ALUMINUM CLADDING OXIDE PREDICTION MODELS FOR EUROPEAN HIGH POWER RESEARCH REACTORS

UMo/Al dispersion fuel clad with aluminum alloy is a primary candidate fuel form that is being developed for the European high power research reactors (EUHPRR). In BR2 tests, water oxidation of cladding grew thick due to high powers. Excessive cladding oxidation is a cause for serious fuel performance degradation in a test while fuel performance itself may be sound. It is necessary for a fuel designer to have a reliable model to predict cladding oxidation for fuel licensing activities. Using oxide data from BR2 tests, this study reviews the prominent oxide prediction models and cladding-to-coolant heat transfer correlations. Because the oxide growth models were based upon different coolant flow conditions from those of the EUHPRR, the effect of the heat transfer correlations at the cladding-to-coolant interface on the oxide thickness prediction were also examined. The best combination of the oxide prediction model and the heat transfer correlation applicable for the EUHPRR is recommended. Since the existing oxide models were all developed for aluminum alloy types different from those currently considered for the EUHPRR, the effect of cladding alloy type is also discussed.

Research reactor fuel, aluminum oxidation, in-pile↗

Comparison of Subdivided Versus Full-Length Fuel Pin Burnup in the ATF-2 Safety Analysis

The Accident Tolerant Fuels (ATF) campaign, under the Fuel Cycle Research and Development (FCRD) Advanced Fuels program, was developed after the Fukushima Daiichi Nuclear Power Plant disaster in 2011. Under ATF, fuel and cladding concepts are to be developed and tested that may more readily withstand an accident similar to the one that occurred at Fukushima Daiichi. ATF is a combination of industry, universities, and national laboratories in an effort to develop advanced accident tolerant cladding and fuel concepts. The end goal of the ATF program is to insert a lead test rod (LTR) or lead test assembly (LTA) into an operating commercial power light water reactor by 2022. In order to meet this 2022 insertion goal, ATF is split into three separate phases: ATF-1, ATF-2, and ATF-3. The first phase of the ATF program, ATF-1, is the concept feasibility study and early irradiation testing. Feasibility, fabrication, and out-of-pile testing are happening at universities and laboratories all over the United States. Irradiation testing of these concepts is happening at the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). Early irradiation testing involves testing clad and/or fuel in drop-in capsules in the ATR. Currently, these capsules are in the relatively low-flux positions in the ATR, but some newer concepts and concepts that require higher burnup will be moved to the higher-flux positions later on during irradiation. Currently, Oak Ridge National Laboratory (ORNL), Westinghouse Electric Company, Areva, and General Electric (GE) have inserted capsules for ATF-1, although more concepts are planned. The second phase of ATF, ATF-2, is the focus of this paper. ATF-2 is the loop testing of fuel pins with new cladding and fuel concepts to simulate pressurized water reactor (PWR) and boiling water reactor (BWR) environments. ATF-2 will concurrently be happening at the ATR and at the Halden Reactor in Norway. The ATF-2 irradiation at the ATR will only simulate a PWR environment. ATF-2 will be inserted into the ATR pressurized water loop, Loop 2A, in the Center Flux Trap (CFT), where chemistry, temperature, and pressure can all be controlled separately from the primary coolant system and other loops in ATR. Loop 2A will be borated, pressurized to 2200 psi nominal, and have an average water temperature of 300 deg. C. A borated loop with fueled rodlets is extremely rare for Nuclear Energy experiments in the ATR, so ATF-2 will demonstrate new and unique capabilities for INL. ATF-3 is the testing of fresh and irradiated ATF concepts at the Transient Reactor Test (TREAT) Facility. The TREAT Reactor is planned for restart, re-establishing U.S. transient testing capabilities after nearly 20 years of non-operations. TREAT will test ATF concepts under transient conditions, such as a reactivity insertion accident. In addition to fresh fuel pins, TREAT will use from ATF2 and do transient testing on those irradiated pins. The information TREAT will provide to the vendors to support fuel licensing will be valuable, showing that these concepts do enhance the accident tolerance of the fuel in commercial reactors. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fracture toughness evaluation for Zr-4 clad tubing structure with pellet inserts

Applying fracture mechanics approach to spent nuclear fuel (SNF) system reliability investigation is warranted due to the inherent flaws and hydride structures existed in a SNF system after nuclear reactor operation. However, none of the existing fracture toughness data deal with fuel cladding specific geometry or spent fuel material conditions, such as cladding structure with the pellet-inserts and the associated pellet clad mechanical interactions induced mixed-mode damage mechanisms. Thus, the development of an intrinsic fracture mechanics approach that is suitable for SNF materials is needed. Due to thin wall and small dimension of clad tubing structure, the spiral notch torsion test (SNTT) method of small specimen approach was used to estimate the clad tubing structure fracture toughness. The estimated fracture toughness for Zr-4 cladding with alumina-pellet inserts are presented in this report. For SNTT samples with a short or medium crack length, between 5.4-mm and 8-mm, the estimate JIQ upon fracture initiation for the baseline Zr-4 cladding is at 50 kJ/m2 with 2-sigma uncertainty of 3.26 kJ/m2, and the associated KIQ is at 67.46 MPa√m. For SNTT samples with a long crack length, around 13-mm, the crack initialization is deviated from that of the Mode-I tensile fracture and appears to be a mixed-mode fracture of Mode I – tensile stress and Mode III – out of plane shear stress; the estimated JMQ is at 18.9 kJ/m2, the associated KMQ is at 41.4 MPa√m.

36 MATERIALS SCIENCE↗

PCI analysis of a commercial PWR using BISON fuel performance code

Through the early 2000’s, nuclear fuel cladding failure resulting from pellet-cladding interaction in commercial pressurized water reactor fuel was managed successfully by incorporating power ramp restrictions. Within the past decade, however, cladding failures have again begun to appear, often correlated to missing pellet surface defects, and further aggravated by modern reactor operating strategies demanding higher fuel duty operations. In response, renewed efforts in fuel behavior modeling and simulation are being pursued to improve our understanding of the conditions that can lead to missing pellet surface related cladding failure. This paper describes a methodology used to model pellet-cladding interaction related failures observed in commercial pressurized water reactors using the BISON fuel performance code developed at Idaho National Laboratory. In order to accomplish this goal, a three-step process is followed: 1) A failure-stress threshold is developed by using BISON code to model ramp test with known pellet-clad interaction related failures, 2) BISON analysis is applied to a commercial pressurized water reactor cycle startup with one rod confirmed to contain a missing pellet surface defect, and 3) an missing pellet surface sensitivity study of a cycle startup of the same commercial pressurized water reactor which contained a failed fuel rod of un-identified type. The analysis results described in this paper serve to illustrate the BISON code capabilities for modeling pressurized water reactor fuel subjected to higher duty power events.

Nuclear Science & Technology↗

Fuels for Advanced Nuclear Energy Systems

Fuels for advanced nuclear reactors differ greatly from conventional light water reactor fuels and vary widely between the different concepts, due differences in reactor architecture and deployment. Functional requirements of all fuel designs include 1) retention of fission products and fuel nuclides, 2) dimensional stability, and 3) maintaining a coolable geometry. In all cases, the anticipated fuel performance under normal or off-normal conditions is the limiting factor in reactor system design, and cumulative effects of increased exposure to higher burnup degrades fuel performance. In high-temperature (thermal) gas reactor systems, fuel particles of uranium dioxide or uranium oxycarbide particles are coated with layers of carbon and SiC (or ZrC). Such fuels have been used successfully to very high burnup (10-20% of heavy-metal atoms) and can withstand transient temperatures up to 1600°C. Oxide (pellet-type) and metal (pin-type) fuels clad in stainless steel tubes have been successfully used in liquid metal cooled fast reactors, attaining burnup of 20% or more of heavy-metal atoms. Those fuel designs are being adapted for actinide management missions, requiring greater contents of minor actinides (e.g. Am, Np, Cm). The current status of each fuel system is reviewed and technical challenges confronting the implementation of each fuel in the context of the entire advanced reactor fuel cycle (fabrication, reactor performance, recycle) are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of chemistry and microstructure on corrosion performance of Zircaloy-2-based BWR cladding - 2016-0066

In boiling water reactors (BWRs), Zircaloy-2 is typically the material of choice for fuel cladding. With increased focus on fuel performance and reliability, consistent cladding corrosion performance under varying BWR conditions has become an acknowledged requirement for modern BWR fuel. To support optimization of corrosion performance, modifications to alloy chemistry and manufacture conditions can be made, supported by ex-reactor corrosion testing and demonstrated through in-reactor operation. In this work, the combined effects of alloy chemistry and fabrication process were investigated. The effect of alloy chemistry is often complicated by variation within a production ingot. In this work, additional measurements were intentionally taken at the tube-shell stage (before cold pilgering) so that chemistry more representative of the final cladding could be obtained and the effect of iron, nickel, and tin could be examined more closely. Although chemistry range of Zircaloy-2 was the primary focus, the effect of iron above the ASTM limit in a new alloy was also explored. Three types of cladding fabrication processes were considered. Two types included a heat treatment applied after the first cold pilgering and annealing, and the treatment was limited to the outer portion of the cladding and differed in the temperature of the heat treatment; the third type had no special heat treatments after the first cold pilgering and annealing. The weight gain of the three types of cladding with varying compositions under two corrosion test conditions (400 deg. C steam and 410/520 deg. C two-stage steam) are discussed in terms of the initial second-phase particle sizes obtained from transmission electron microscopy examinations. Based on poolside inspections and hot-cell examinations, the in-reactor corrosion performance of the two cladding types up to typical discharge exposures are discussed in the terms of corrosion margin, microstructure evolution, and correlation with ex-reactor corrosion test data. (authors)

36 MATERIALS SCIENCE↗

Understanding the interface interaction between U3Si2 fuel and SiC cladding

Abstract Triuranium disilicide (U 3 Si 2 ) fuel with silicon carbide (SiC) composite cladding is being considered as an advanced concept/accident tolerant fuel for light water reactors thus, understanding their chemical compatibility under operational and accident conditions is paramount. Here we provide a comprehensive view of the interaction between U 3 Si 2 and SiC by utilizing density functional theory calculations supported by diffusion couple experiments. From the calculated reaction energies, we demonstrate that triuranium pentasilicide (U 3 Si 5 ), uranium carbide (UC), U 20 Si 16 C 3 , and uranium silicide (USi) phases can form at the interface. A detailed study of U 3 Si 2 and SiC defect formation energies of the equilibrated materials yielding the interfacial phases U 20 Si 16 C 3 , U 3 Si 5 and UC reveal a thermodynamic driving force for generating defects in both fuel and cladding. The absence of either the U 3 Si 2 or SiC phase, however, causes the defect formation energies in the other phase to be positive, removing the driving force for additional interfacial reactions. The diffusion couple experiments confirm the conclusion with demonstrated restricted formation of U 3 Si 5 , UC, and U 20 Si 16 C 3 /USi phases at the interface. The resulting lack of continuous interaction between the U 3 Si 2 and SiC, reflects the diminishing driving force for defect formation, demonstrating the substantial stability of this fuel-cladding system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Mockups and Instrumentation for Spent Fuel Drying Tests

The purpose of this report is to provide updates on the experimental components, methodology, and instrumentation under development for use in advanced studies of realistic drying operations conducted on surrogate spent nuclear fuel. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system. Water remaining in canisters upon completion of drying procedures can lead to cladding corrosion, embrittlement, and breaching, as well as fuel degradation. Additional information is needed on the drying process efficacy to help evaluate the potential impacts of water retention on extended longterm dry storage. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates additional, well-designed investigations. Smaller-scale tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report describes the implementation of moisture monitoring equipment on a pressurized, submersible system employing a single waterproof, electrically heated spent fuel rod simulator as a demonstration of analytical capabilities during a drying process. A mass spectrometer with specially designed inlets was used to monitor moisture and other gases at 150 kPa to 800 kPa for a test simulating a forced helium dehydration procedure and below 1 torr for tests mimicking a vacuum drying process. The dew point data from the mass spectrometer was found to be in good agreement with a solid-state moisture probe. A distinct advantage of the mass spectrometer system was the capability to directly sample from the hightemperature (>200 °C) head space expected in a prototypic scale experiment where a solid-state moisture probe would suffer considerable loss of accuracy or fail altogether. The operational and analytical experiences gained from this test series are poised to support an expansion to assembly-scale tests at prototypic length. These assemblies are designed to feature prototypic assembly hardware, advanced diagnostics for in situ internal rod pressure monitoring, and failed fuel rod simulators with engineered cladding defects to challenge the drying system with waterlogged fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Distended GPHS Clads: Characterization of Fuel Particle Size

GPHS Clads have been observed to distend or bulge slightly after aging or after storage in hot conditions. Configurations in which the fuel can reach a temperature above about 900°C appear to promote distension.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Tellurium as a Fuel Additive in Neodymium-Containing U-Zr Metallic Fuel

Phase-stability in a U-Zr-Te-Nd multi-component metallic fuel for advanced nuclear reactors is systematically investigated by taking into account binary, ternary and quaternary interactions between elements involved. Historically, the onset of fuel-cladding chemical interactions (FCCI) greatly limits the burnup potential of U-Zr fuels primarily due to interactions between lanthanide fission products and cladding constituents. Tellurium (Te) is evaluated as a potential additive for U-Zr fuels to bind with lanthanide fission products, e.g. neodymium (Nd), negating or mitigating the FCCI effect. Potential fresh fuel alloy compositions with the Te additive, U-Zr-Te, are characterized. Te is found to completely bind with Zr within the U-Zr matrix. Alloys simulating the formation of the lanthanide element Nd within U-Zr-Te are also evaluated, where the Te-Nd binary interaction dominates and NdTe is found to form as a high temperature stable compound. The experimental observations agree well with the trends obtained from density functional theory calculations. According to the calculated enthalpy of mixing, Zr-Te compound formation is favored in the U-Zr-Te alloy whereas NdTe compound formation is favored in the U-Zr-Te-Nd alloy. Further, the calculated charge density distribution and density of states provide sound understanding of the mutual chemical interactions between elements and phase-stability within the multi-component fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RELAP-7 Application and Enhancement for FLEX Strategies and ATF Behavior under Extended Loss of AC Power Conditions

This report summarizes the results of a three-year research project sponsored by the U.S. Department of Energy (DOE) Nuclear Energy University Program (NEUP) to enhance and apply the RELAP-7 code by adding and improving several important components (e.g., a mechanistic Reactor Core Isolation Cooling (RCIC) system model) for thermal hydraulic studies of LWRs under ELAP conditions and evaluating the time available for transition to portable FLEX equipment. The project team included University of Massachusetts–Lowell, The Ohio State University, Texas A&M University, Idaho National Laboratory and Oak Ridge National Laboratory. In the Fukushima accident, it was found that the RCIC system played a crucial role in delaying core meltdown by almost three days in Fukushima Daiichi Unit 2, because of self-regulated operation of the steam driven RCIC turbine-pump injection system. Steam flow in the convergent-divergent nozzles of the RCIC Terry turbine is two-phase non-equilibrium transonic flow with homogenous nucleation condensation. To more accurately predict the dynamic process and behavior of the transonic compressible steam flow, a one-dimensional transient two-phase analytical model is presented. A simplified four-fluid model was employed in the present work with the consideration of four separate fluid fields: vapor, liquid film, entrained droplets and condensed droplets. The mass, momentum and energy interactions between the fluids were considered and modeled. An extended seven-equation non-equilibrium critical flow model was developed to obtain the critical pressure and velocities of each phase at the nozzle throat. To predict the wetness in the divergent section, a mechanistic nucleation condensation model was integrated in the nozzle analysis model, considering the generation and consequent growth of droplets. The governing differential equations on a staggered grid were discretized using the second-order Lax-Wendroff scheme with a flux limiter, and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE) algorithm was employed to solve the discrete linear system. To demonstrate the predictability and reliability of the physical models and the numerical method proposed in the present work, three representative nozzles were modeled and simulated. The results show good agreement with the available experimental data, even for condensation shock. Then, the 1D nozzle model was employed to obtain nozzle flow tables of the Terry turbine nozzle for different working pressures which can cover the operation pressure range of the RCIC system. A mechanistic RCIC turbine-pump system model was developed and implemented in the system code TRACE to simulate dynamic responses of the RCIC system under Beyond Design Basis Accident (BDBA) conditions. The turbine-pump governing equations are based on the control volume approach of the angular momentum balance. The physics based mechanistic RCIC model was developed using the TRACE control system components (i.e., signal variables, control blocks, and tables), and incorporated into a TRACE boiling water reactor (BWR) model. The TRACE model in this report has a detailed nodalization of the reactor pressure vessel (RPV), and all of the major flow paths and system components, including the safety relief valves (SRVs) and the containment suppression pool and drywell. Based on the nozzle flow tables generated from the 1D nozzle model developed, the turbine drive torque can be calculated from table lookup. Since the detailed specifications of the RCIC pump are unavailable, the homologous curves for a Bingham pump were used in the current pump component. A station black-out (SBO) accident test problem was selected to demonstrate the TRACE RCIC model. The short-term SBO simulations were performed for two cladding materials: Zircaloy and FeCrAl, to demonstrate the effect of the accident tolerant fuel cladding on fuel heat-up under BDBA accident conditions. The wetwell plays a vital safety role in SBO and other BWR accident scenarios in that it can reduce containment pressure and supply additional core make-up water. The suppression pool temperature distribution has a very large impact on both RPV and containment pressure. Thus, another novel contribution of the project comes mainly from an improved, systems-level wetwell model which can capture buoyancy-induced thermal stratification effects due to steam injection and condensation. A two-zone stratified wetwell model has been implemented in RELAP-7 and some results from that model are presented. This wetwell model is capable of simulating thermal stratification due to a low steam mass injection rate. With a low mass flow rate, the model assumes that all the steam condenses within the pipe and the resulting plume can be approximated with a purely buoyant, heat-source driven model. The wetwell model developed with these assumptions is adequate to simulate slow transients such as extended SBO transients.

42 ENGINEERING↗

Effects of Internal and External Heat Sources on Cladding Microstructure and Rupture Performance

In the event of a Loss of Coolant Accident (LOCA), the primary supply of cooling water for a nuclear reactor is lost, leading to a significant pressure differential across the cladding wall. Without adequate cooling, the fuel rods continue to heat as a result of fission reactions. Research at Oak Ridge National Laboratory’s (ORNL’s) Severe Accident Test Station (SATS) is currently focused on evaluating fuel cladding performance using an external infrared lamp as a heat source, whereas legacy testing primarily utilized an internal heating approach. While external heating may better simulate the effect of neighboring fuel rods heating a central rod, it may not accurately represent the internal heat absorption from the fuel during accident transients. The heating dynamics depend greatly on the fuel rod's position within the bundle and the reactor. To fully understand the implications of a LOCA event and assess the influence of internal heating on cladding performance, combined internal heating and pressurization capability was developed at ORNL. Tests were conducted to compare cladding segments heated internally (representing heat from the fuel within the rod) and externally (representing heat from adjacent fuel rods). The findings indicate that both internal and external heating result in comparable rupture temperatures during 5°C/s laboratory LOCA tests and also agree with legacy test data. Axial temperature gradients and internal heat source dispersal were found to significantly impact cladding deformation and rupture geometry. Clear modifications were outlined to further improve the capability with heating rates above 5°C/s.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lanthanides in Metallic Nuclear Fuels: Their Behavior and Methods for Their Control

The thermodynamic and experimental basis is given for using dopant additives to bind lanthanides as intermetallic compounds in metallic nuclear fuels. Lanthanide fission products are a major factor in limiting the lifetime of the fuel, because they migrate to the fuel slug peripheral surface where they participate in fuel-cladding chemical interactions (FCCI) with the steel cladding. Lanthanide carryover in recycled metal fuels can accelerate FCCI, as recycled lanthanides would likely segregate from the fuel phase, putting the lanthanides in prompt contact with the cladding. In out-of-pile tests we examined the use of Pd for binding the lanthanides, with Pd selected because of its known metallurgical properties in fuel related systems and because of its known behavior in irradiated EBR-II fuels. Initial results confirmed that palladium may be expected to mitigate FCCI arising from lanthanides, and it has been recommended for in-pile tests. We also evaluated transport phenomena responsible for lanthanide migration, and identified liquid-like behaviors as being dominant. Liquid-like behaviors include transport with liquid metals, liquid metal solutions, and rapid surface transport of alloys/metals near their melting temperatures. The analysis led to establishing general criteria for selecting alternate dopant additives, and identifying Sn, Sb, and Te as alternates for further testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗