Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heat balance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A global view of F-region electron density and temperature at solar maximum

It is pointed out that the thermal structure of the ionosphere represents a quasi-static balance between a variety of heat sources and sinks which vary spatially and temporally on a wide range of time scales. The present investigation has the objective to present selected early results from the Dynamics Explorer-2 (DE-2) Langmuir probe instrument and to make an initial evaluation of how the thermal structure of the ionosphere at solar maximum differs from that observed at solar minimum. Bowen et al. (1964) and Brace and Reddy (1965) devised early empirical models of the F region electron temperature (Te), based on satellite Langmuir probe measurements at low levels of solar activity. The global structure of Te and the electron density (Ne) obtained in the current investigation is not very different from that reported by Brace and Reddy. The primary difference at solar maximum is that Ne is everywhere much higher, but Te differs only in detail.

Brace, L. H.↗
NASA NTRS1987

High temperature solid oxide regenerative fuel cell for solar photovoltaic energy storage

A hydrogen-oxygen regenerative fuel cell energy storage system based on high temperature solid oxide fuel cell technology is discussed which has application to darkside energy storage for solar photovoltaics. The forward and reverse operating cycles are described, and heat flow, mass, and energy balance data are presented to characterize the system's performance and the variation of performance with changing reactant storage pressure. The present system weighs less than nickel hydrogen battery systems after 0.7 darkside operation, and it maintains a specific weight advantage over radioisotope generators for discharge periods up to 72 hours.

Bents, David J.↗
NASA NTRS1991

Momentum and heat flux estimation in the planetary boundary layer (PBL) with a 10.6-micron Doppler lidar

The mean wind, its standard deviation, and the momentum fluxes in the PBL are estimated with a 10.6-micron Doppler lidar. Spectral analysis of the radial velocities was performed, from which, by examining the amplitude of the power spectrum at the inertial range, the kinetic energy dissipation was deduced. The statistical form of the Navier-Stokes equations was used to derive the surface heat flux as the residual balance between the vertical gradient of the third moment of the vertical velocity and the kinetic energy dissipation.

Gal-Chen, Tzvi↗
NASA NTRS2010

Analysis of Air-Sea Interactions in the NASA MERRA Product

Interactions between the ocean and atmosphere influence the global energy and water balance through the exchange of heat, moisture and momentum. These interactions occur over a wide range of space and time scales and need to be properly represented in climate and reanalysis simulations. This study focuses on the representation of the turbulent latent and sensible heat fluxes in the newly developed NASA Modern Era Retrospective-Analysis for Research and Applications (MERRA). It is shown that MERRA achieves realistic estimates of the turbulent fluxes for many space and time scales although some deficiencies are noted. Comparisons are made at high resolution temporal scales with measurements from several research vessels while long term comparisons are made with moored buoys. These results are contrasted with those from several other currently available reanalysis and satellite based products. The representation of feedbacks between the atmosphere and ocean area also examined through the use of simultaneous and lagged correlation analyses with particular focus on precipitation and sea surface temperature relationships. Together, these results demonstrate the consistency of the NASA MERRA product and its applicability for process studies across wide ranging scales of variability.

Roberts, J. Brent↗
NASA NTRS2015

Development of an Infrared Lamp Array for the Smap Spacecraft Thermal Balance Test

NASA launched the SMAP observatory in January 2015 aboard a Delta II into a sun-synchronous orbit around Earth. The science payload of a radar and a radiometer utilizes a shared rotating six-meter antenna to provide a global map of the Earth's soil moisture content and its freeze/thaw state on a global, high-resolution scale in this three-year mission. An observatory-level thermal balance test conducted in May/June 2014 validated the thermal design and demonstrated launch readiness as part of the planned environmental test campaign. An infrared lamp array was designed and used in the thermal balance test to replicate solar heating on the solar array and sunlit side of the spacecraft that would normally be seen in orbit. The design, implementation, and operation of an infrared lamp array used for this nineteen-day system thermal test are described in this paper. Instrumental to the smooth operation of this lamp array was a characterization test performed in the same chamber two months prior to the observatory test to provide insight into its array operation and flux uniformity. This knowledge was used to identify the lamp array power settings that would provide the worst case predicted on-orbit fluxes during eclipse, cold, and hot cases. It also showed the lamp array variation when adjustments in flux were needed. Calorimeters calibrated prior to testing determined a relationship between calorimeter temperature and lamp array flux. This allowed the team to adjust the lamp output for the desired absorbed flux on the solar array. Flux levels were within 10% of the desired value at the center of the solar array with an ability to maintain these levels within 5% during steady state cases. All tests demonstrated the infrared lamp array functionality and furthered lamp array understanding for modeling purposes. This method contributed to a high-fidelity environmental simulation, which was required to replicate the extreme on-orbit thermal environments.

Miller, Jennifer R.↗
NASA NTRS2018

The Next-Generation Goddard Convective-Stratiform Heating Algorithm: New Tropical and Warm-Season Retrievals for GPM

The Goddard convective-stratiform heating (CSH) algorithm, used to estimate cloud heating in support of the Tropical Rainfall Measuring Mission (TRMM), is upgraded in support of the Global Precipitation Measurement (GPM) mission. The algorithm's lookup tables (LUTs) are revised using new and additional cloud-resolving model (CRM) simulations from the Goddard Cumulus Ensemble (GCE) model, producing smoother heating patterns that span a wider range of intensities because of the increased sampling and finer GPM product grid. Low-level stratiform cooling rates are reduced in the land LUTs for a given rain intensity because of the rain evaporation correction in the new four-class ice (4ICE) scheme. Additional criteria, namely, echo-top heights and low-level reflectivity gradients, are tested for the selection of heating profiles. Those resulting LUTs show greater and more precise variation in their depth of heating as well as a tendency for stronger cooling and heating rates when low-level dBZ values decrease toward the surface. Comparisons versus TRMM for a 3-month period show much more low-level heating in the GPM retrievals because of increased detection of shallow convection, while upper-level heating patterns remain similar. The use of echo tops and low-level reflectivity gradients greatly reduces midlevel heating from ~2 to 5 km in the mean GPM heating profile, resulting in a more top-heavy profile like TRMM versus a more bottom-heavy profile with much more midlevel heating. Integrated latent heating rates are much better balanced versus surface rainfall for the GPM retrievals using the additional selection criteria with an overall bias of +4.3%.

Lang, Stephen E.↗
NASA NTRS2016

Migration of Accreting Planets in Radiative Discs From Dynamical Torques

We present the results of hydrodynamical simulations of the orbital evolution of planets undergoing runaway gas accretion in radiative discs. We consider accreting disc models with constant mass flux through the disc, and where radiative cooling balances the effect of viscous heating and stellar irradiation. We assume that 20–30 M(sub ⨁) giant planet cores are formed in the region where viscous heating dominates and migrate outward under the action of a strong entropy-related corotation torque. In the case where gas accretion is neglected and for an α viscous stress parameter α = 2 × 10(exp -3), we find evidence for strong dynamical torques in accreting discs with accretion rates M ̇ ≳ 7 × 10(exsp -8)M(sub ⨀) yr(exp -1). Their main effect is to increase outward migration rates by a factor of ∼2 typically. In the presence of gas accretion, however, runaway outward migration is observed with the planet passing through the zero-torque radius and the transition between the viscous heating and stellar heating dominated regimes. The ability for an accreting planet to enter a fast migration regime is found to depend strongly on the planet growth rate but can occur for values of the mass flux through the disc of M ̇ ≳ 5 × 10(exp -8)M(sub ⨀) yr(exp -1).We find that an episode of runaway outward migration can cause an accreting planet formed in the 5–10 au region to temporarily orbit at star–planet separations as large as∼60–70 au. However, increase in the amplitude of the Lindblad torque associated with planet growth plus change in the streamline topology near the planet systematically cause the direction of migration to be reversed. Subsequent evolution corresponds to the planet migrating inward rapidly until it becomes massive enough to open a gap in the disc and migrate in the type II regime. Our results indicate that a planet can reach large orbital distances under the combined effect of dynamical torques and gas accretion, but an alternative mechanism is required to explain the presence of massive planets on wide orbits.

Accretion↗
NASA NTRS1984

Radiative-convective equilibrium models of Jupiter and Saturn

Radiative-convective equilibrium models for Jupiter and Saturn have been produced in a study concentrating on the stratospheric energy balance and the possible role of aerosol heating. These models are compared directly with the thermal structure profiles obtained from Voyager radio occultation measurements. The method is based on a straightforward flux divergence formulation derived from earlier work. The balance between absorbed and emitted energies is computed iteratively at each level in the atmosphere, assuming local thermodynamic equilibrium and employing a standard treatment of opacities. Results for Jupiter indicate that a dust-free model furnishes a good mean thermal profile for the stratosphere when compared with the Voyager 1 radio occultation measurements. Observations of the equatorial region exhibit periodic vertical structure. The Saturn models are relatively simple and in good agreement with the Voyager 2 radio occultation temperature profiles at all levels. Aerosol heating played a minor role in Saturn's midlatitude stratospheric energy balance at the time of the Voyager 2 encounter.

Appleby, J. F.↗
NASA NTRS1974

The structure and circulation of the deep Venus atmosphere

A simple model for the structure of a nonrotating Hadley regime in an atmosphere with large thermal inertia is developed. The radiative fluxes are estimated by using a linearization about the radiative equilibrium state, and the dynamical fluxes are estimated by using scaling analysis. The requirement that differential heating by these fluxes be in balance in both the meridional and vertical directions leads to two equations for the mean static stability and meridional temperature contrast. The solution depends on two parameters: the strength of the radiative heating, as measured by the static stability of the radiative equilibrium state; and the ratio of the time it takes an external gravity wave to traverse the atmosphere to the time it would take the atmosphere to cool off radiatively. It is shown that it is not necessary to invoke convection to explain the approximate adiabatic lapse rate in the Venus atmosphere, but a greenhouse effect is necessary to explain the high surface temperatures.

Stone, P. H.↗
NASA NTRS1974

A model of heat transfer in immersed man

An equation representing man's thermal balance under water is considered. The equation states that the body thermal loading from metabolic heat production and artificial heat input must be offset by respiratory and environmental heat exchange to maintain a constant body temperature. Critical body regions are affected by cold-water thermal stress. A model of the thermoregulatory system may be divided into the physical-controlled system and the dynamic controlling system. The thermal model is simulated by computer programs.

Montgomery, L. D.↗
DOE OSTI2024

Gyrokinetic prediction of core tungsten peaking in a WEST plasma with nitrogen impurities

Tungsten peaking is predicted in the core of a WEST plasma with total-f gyrokinetic simulations, including both collisional and turbulent transport. This prediction is validated with a synthetic diagnostic of the bolometry. Although nitrogen impurities are shown to reduce the neoclassical peaking of tungsten on-axis, the overall tungsten peaking increases when nitrogen impurities are present, as they reduce the turbulence screening off-axis. This finding is important for the plasma current ramp-up phase of ITER, where light impurities seeding will be desirable to achieve low temperatures at the plasma-facing components and reduce tungsten sputtering. It provides further argument for applying early ECRH heating to maintain margins on the core power balance. The neoclassical peaking factor is cross-verified between XGC and FACIT. The heat flux at separatrix and the heat load width are modeled by XGC and compared to WEST data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1989

Acclimatization to heat in humans

The responses and mechanisms of both natural and artificial acclimatization to a hot environment in mammals are addressed with specific reference to humans. The purpose is to provide basic information for designers of thermal protection systems and countermeasures for astronauts during intra- and extravehicular activity. Areas covered are energy metabolism, thermal balance at rest and during exercise, water and electrolyte balance during exercise and immobilization, and heat diseases.

Greenleaf, John E.↗
NASA NTRS2001

Thermal/Pyrolysis Gas Flow Analysis of Carbon Phenolic Material

Provided in this study are predicted in-depth temperature and pyrolysis gas pressure distributions for carbon phenolic materials that are externally heated with a laser source. Governing equations, numerical techniques and comparisons to measured temperature data are also presented. Surface thermochemical conditions were determined using the Aerotherm Chemical Equilibrium (ACE) program. Surface heating simulation used facility calibrated radiative and convective flux levels. Temperatures and pyrolysis gas pressures are predicted using an upgraded form of the SINDA/CMA program that was developed by NASA during the Solid Propulsion Integrity Program (SPIP). Multispecie mass balance, tracking of condensable vapors, high heat rate kinetics, real gas compressibility and reduced mixture viscosity's have been added to the algorithm. In general, surface and in-depth temperature comparisons are very good. Specie partial pressures calculations show that a saturated water-vapor mixture is the main contributor to peak in-depth total pressure. Further, for most of the cases studied, the water-vapor mixture is driven near the critical point and is believed to significantly increase the local heat capacity of the composite material. This phenomenon if not accounted for in analysis models may lead to an over prediction in temperature response in charring regions of the material.

Clayton, J. Louie↗
NASA NTRS1990

Evolution of topography on comets. II - Icy craters and trenches

The determination of the effects of topography on the sublimation rates of comets and other icy bodies is presently approached via a model of ice heating and sublimation from topographical features. The energy balance equation is solved for cylindrical trenches and spherical craters; the model encompasses shadowing, solar heating, the trapping of thermal radiation and sublimed gas molecules, and reflection of sunlight within the cavity. Generally, an enhancement is found in the net sublimation rate for trenches and craters farther from the sun than some critical distance which depends on the albedo.

Colwell, Joshua E.↗
NASA NTRS2015

Introduction to Heat Pipes

This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

Heat Pipes↗
NASA NTRS2013

Tropical Ocean Surface Energy Balance Variability: Linking Weather to Climate Scales

Radiative and turbulent surface exchanges of heat and moisture across the atmosphere-ocean interface are fundamental components of the Earth s energy and water balance. Characterizing the spatiotemporal variability of these exchanges of heat and moisture is critical to understanding the global water and energy cycle variations, quantifying atmosphere-ocean feedbacks, and improving model predictability. These fluxes are integral components to tropical ocean-atmosphere variability; they can drive ocean mixed layer variations and modify the atmospheric boundary layer properties including moist static stability, thereby influencing larger-scale tropical dynamics. Non-parametric cluster-based classification of atmospheric and ocean surface properties has shown an ability to identify coherent weather regimes, each typically associated with similar properties and processes. Using satellite-based observational radiative and turbulent energy flux products, this study investigates the relationship between these weather states and surface energy processes within the context of tropical climate variability. Investigations of surface energy variations accompanying intraseasonal and interannual tropical variability often use composite-based analyses of the mean quantities of interest. Here, a similar compositing technique is employed, but the focus is on the distribution of the heat and moisture fluxes within their weather regimes. Are the observed changes in surface energy components dominated by changes in the frequency of the weather regimes or through changes in the associated fluxes within those regimes? It is this question that the presented work intends to address. The distribution of the surface heat and moisture fluxes is evaluated for both normal and non-normal states. By examining both phases of the climatic oscillations, the symmetry of energy and water cycle responses are considered.

Roberts, J. Brent↗
NASA NTRS2003

Thin-Film Air-Mass-Flow Sensor of Improved Design Developed

Researchers at the NASA Glenn Research Center have developed a new air-mass-flow sensor to solve the problems of existing mass flow sensor designs. NASA's design consists of thin-film resistors in a Wheatstone bridge arrangement. The resistors are fabricated on a thin, constant-thickness airfoil to minimize disturbance to the airflow being measured. The following photograph shows one of NASA s prototype sensors. In comparison to other air-mass-flow sensor designs, NASA s thin-film sensor is much more robust than hot wires, causes less airflow disturbance than pitot tubes, is more accurate than vane anemometers, and is much simpler to operate than thermocouple rakes. NASA s thin-film air-mass-flow sensor works by converting the temperature difference seen at each leg of the thin-film Wheatstone bridge into a mass-flow rate. The following figure shows a schematic of this sensor with air flowing around it. The sensor operates as follows: current is applied to the bridge, which increases its temperature. If there is no flow, all the arms are heated equally, the bridge remains in balance, and there is no signal. If there is flow, the air passing over the upstream legs of the bridge reduces the temperature of the upstream legs and that leads to reduced electrical resistance for those legs. After the air has picked up heat from the upstream legs, it continues and passes over the downstream legs of the bridge. The heated air raises the temperature of these legs, increasing their electrical resistance. The resistance difference between the upstream and downstream legs unbalances the bridge, causing a voltage difference that can be amplified and calibrated to the airflow rate. Separate sensors mounted on the airfoil measure the temperature of the airflow, which is used to complete the calculation for the mass of air passing by the sensor. A current application for air-mass-flow sensors is as part of the intake system for an internal combustion engine. A mass-flow sensor is used to provide accurate information about the amount of air entering the engine so that the amount of fuel can be adjusted to give the most efficient combustion. The ideal mass-flow sensor would be a rugged design that minimizes the disturbance to the flow stream and provides an accurate reading of both smooth and turbulent flows; NASA's design satisfies these requirements better than any existing design. Most of the mass-flow sensors used today are the hot wire variety. Hot wires can be fragile and cannot accurately measure a turbulent or reversing flow, which is often encountered in an intake manifold. Other types of mass-flow sensors include pitot tubes, vane anemometers, and thermocouple rakes-all of which suffer from some type of performance problem. Because it solves these performance problems while maintaining a simple design that lends itself to low-cost manufacturing techniques, NASA s thin-film resistance temperature detector air-mass-flow sensor should lead to more widespread use of mass-flow sensors.

Fralick, Gustave C.↗
NASA NTRS1986

Radiative-convective equilibrium models of Uranus and Neptune

The present study of Uranus and Neptune radiative-convective equilibrium models gives emphasis to such aspects of the stratospheric energy balance as the influence of aerosol heating and convective penetration. The results obtained for Uranus imply that a 'continuum absorber' may be a significant factor in the stratosphere despite the great distance from the sun. The results obtained for Neptune show that such a continuum absorber could significantly contribute to the energy balance within a localized stratospheric region, although it probably cannot furnish sufficient power to account for the observed IR spectrum irrespective of its vertical distribution. Attention is accordingly given to the 'convective penetration' that could arise under such rapid vertical mixing that CH4's condensation cannot occur before the gas is carried above the condensation region.

Appleby, J. F.↗