Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dynamic Control of Photocatalytic Proton Reduction through the Mechanical Actuation of a Hydrogel Host Matrix

This paper describes a photocatalytic hydrogen evolution system that is dynamically and reversibly responsive to the pH of the surrounding solution through actuation of a micro-hydrogel (microgel) matrix that hosts the photocatalysts (CdSe/CdS nanorods). Here, the reversible actuation occurs within 0.7 s (swelling) and 1.7 s (contraction). A ΔpH of 0.01 relative to the pK a of the tertiary amine on the microgel polymer (7.27) results in a reversible change in the average diameter of the microgel hosts by a factor of 2.5 and a change in the photocatalytic turnover frequency (TOF) by a factor of five. Kinetic isotope effect and photoluminescence quenching experiments reveal that the scavenging of the photoexcited hole by sulfite ions is the rate-limiting step and leads to the observed response of the TOF to pH through actuation of the microgel. Molecular dynamics simulations quantify a greater local concentration of sulfite hole scavengers for pH < pK a .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction

The electrochemical nitrate reduction reaction (NO 3 RR) is a promising alternative synthetic route for sustainable ammonia (NH 3 ) production, because it not only eliminates nitrate (NO 3 – ) from water but also produces NH 3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe 3 O 4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO 3 – to NH 3 , with a maximum FE of ~100% and an NH 3 yield of 179.55 ± 16.37 mg h –1 mg cat –1 at –0.6 V vs RHE. Here, theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO 3 RR activity using heteroatom doping strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomic Layer Deposition of Cu Electrocatalysts on Gas Diffusion Electrodes for CO 2 Reduction

Electrochemical reduction of CO 2 using Cu catalysts enables the synthesis of C 2+ products including C 2 H 4 and C 2 H 5 OH. Here, in this study, Cu catalysts were fabricated using plasma-enhanced atomic layer deposition (PEALD), achieving conformal deposition of catalysts throughout 3-D gas diffusion electrode (GDE) substrates while maintaining tunable control of Cu nanoparticle size and areal loading. The electrochemical CO 2 reduction at the Cu surface yielded a total Faradaic efficiency (FE) > 75% for C 2+ products. Parasitic hydrogen evolution was minimized to a FE of ~10%, and a selectivity of 42.2% FE for C 2 H 4 was demonstrated. Compared to a line-of-sight physical vapor deposition method, PEALD Cu catalysts show significant suppression of C 1 products compared to C 2+ , which is associated with improved control of catalyst morphology and conformality within the porous GDE substrate. Finally, PEALD Cu catalysts demonstrated a stable performance for 15 h with minimal reduction in the C 2 H 4 production rate.

42 ENGINEERING↗
DOE OSTI2021

Electronic Structure, Chemical Bonding and Electrocatalytic Activity of Novel Ba(Fe0.7Ta0.3)O3-d Compounds

Ba(Fe0.7Ta0.3)O3-d (BFTO) compounds were synthesized using conventional, high-temperature solid-state ceramic reaction method by varying the sintering temperature (Ts=1200-1350 °C). The crystal structure, electronic structure and electrocatalytic activity of BFTO compounds were evaluated. Processing temperature induced phase transformations and structural quality influences the electronic structure and electrocatalytic activity of BFTO compounds. At Ts=1200 oC, Ba(Fe0.7Ta0.3)O3-d stabilizes in mixed phase of orthorhombic + rhombohedral phase (Amm2 + R3m). With increasing Ts (=1250 oC), Ba(Fe0.7Ta0.3)O3-d ceramics stabilize in tetragonal + rhombohedral [P4mm + R3m] mixed phase with a variation in the quantity of respective phases. High-resolution X-ray photoelectron spectroscopy of constituent elements, namely, Ba 3d, Fe2p, Ta 4f and O 1s reveal the electronic structure changes due to changes in chemical environment resulted from structural transformation. The electrocatalytic activity of BFTO was evaluated towards hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Though all the samples demonstrated appreciable electrocatalytic properties, the best electrochemical catalytic activity was shown by BFTO samples sintered at 1350 °C. BFTO-1350 oC showed an onset potential of -0.690 V vs. RHE for HER and an onset potential of 0.73 V vs. RHE for ORR indicating its significant electrocatalytic performance. A general increase in activity with sintering temperature is potentially due to the improved structural quality of the BFTO ceramics. In addition to offering the fundamental insights into solid state materials based on doped BaTiO3 for electrocatalysis, the present work may contribute to the design and development of materials for high-temperature electrocatalytic converters.

Ba(Fe0.7Ta0.3)O3-d, Phase Transformation↗
DOE OSTI2022

Atomically Dispersed CuN x Sites from Thermal Activation of Boron Imidazolate Cages for Electrocatalytic Methane Generation

Atomically dispersed metal sites (ADMSs) have been recognized as promising candidates for electrochemical conversion. Among a diverse range of molecular precursors for ADMS synthesis, framework materials are particularly interesting due to their high degree of tunability and control over the primary coordination sphere of the metal ions. In this work, we demonstrate that a copper boron imidazolate cage, BIF-29(Cu), is a convenient precursor for a competent catalyst with isolated Cu sites coordinated by N donors for carbon dioxide electroreduction (CO 2 RR). Although BIF-29(Cu) exhibited moderate methane selectivity over hydrogen evolution reaction (HER), the methane selectivity is significantly enhanced by 2 times (55% CH 4 at –1.25 V vs RHE) after mild thermal activation. Extensive characterization methods indicate the transformation of crystalline BIF-29(Cu) into an amorphous carbonaceous material comprising isolated CuN x sites. Moreover, in situ X-ray absorbance spectroscopy indicates stable CuN x sites that are reduced during CO 2 RR. This work encourages the discovery of single-site electrocatalytic systems through a rational selection of molecular precursor and calcination parameters for promoting product selectivity.

10 SYNTHETIC FUELS↗
DOE OSTI2025

Anolyte Buffering and CO Coverage Effects in the Electrochemical Reduction of CO at Cu Electrocatalysts

Electrolytic CO reduction was investigated at copper electrocatalysts in zero-gap membrane electrode assemblies as a function of buffering agents and cofeeding with CO 2 or Ar. Results show an acetate Faradaic efficiency (FE) of 90% at 300 mA cm −2 using pure CO feeds and phosphate-buffered anolyte near pH 8. When using CO feeds with more alkaline anolytes, the hydrogen evolution reaction becomes the dominant reduction reaction, independent of the buffer. Product distributions of cofeeding experiments with CO and CO 2 show that increasing CO 2 cofeeding results in increased selectivity toward ethylene (42% FE) in near-neutral KHCO 3 anolytes or ethanol (40% FE) in alkaline KOH anolytes. Evaluation of several commercial anion exchange membranes shows similar selectivity trends, suggesting product selectivity is dominated by the local pH and surface coverage of CO. Based on these results, we propose pH buffering and CO coverage behaviors that facilitate high selectivities to acetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis and Electrocatalytic HER Studies of Carbene-Ligated Cu 3– x P Nanocrystals

N-heterocyclic carbenes (NHCs) are an important class of ligands capable of making strong carbon-metal bonds. Recently, there has been a growing interest in the study of carbene-ligated nanocrystals, primarily coinage metal nano-crystals, which have found application as catalysts for numerous reactions. The general ability of NHC ligands to positively affect the catalytic properties of other types of nanocrystal catalysts remains unknown. Furthermore, we present the first carbene-stabilized Cu 3–x P nanocrystals. Inquiries into the mechanism of formation of NHC-ligated Cu 3-x P nanocrystals suggest that crystalline Cu 3–x P forms directly as a result of a high-temperature metathesis reaction be-tween a tris(trimethylsilyl)phosphine precursor and an NHC-CuBr precursor, the latter of which behaves as a source of both carbene ligand and Cu + . To study the effect of the NHC surface ligands on catalytic performance, we tested the electrocatalytic hydrogen evolving ability of the NHC-ligated Cu 3–x P nanocrystals and found they possess superior activity to analogous oleylamine-ligated Cu 3–x P nanocrystals. Density functional theory calculations suggest that the NHC ligands minimize unfavorable electrostatic interactions between the copper phosphide surface and H + during the first step of the hydrogen evolution reaction, which contributes to the superior performance of NHC-ligated Cu 3–x P catalysts as compared to oleylamine-ligated Cu 3–x P catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Charge Transport Property and Photocatalytic Activity of Anthracene-Based 1D π–d Conjugated Coordination Polymers by Interlayer Stacking

One-dimensional (1D) π–d-conjugated coordination polymers (CCPs) with charge delocalization have attracted significant attention due to their potential application in energy conversion and storage. However, the fundamental understanding of the correlation of their structural parameters with photophysical and photocatalytic properties remains underexplored. Herein, we report three novel Cu-node anthracene-based 1D π–d CCPs with systematic variation of steric groups (Ph > Me > H) at the 9 and 10 position of anthracene (denoted as An Ph , An Me , and An H ), which is aimed at altering the stacking of the polymer chains and its impact on the inter-chain charge transport property. Here, by using the combination of steady-state X-ray absorption spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and electrochemical impedance spectroscopy, we show that the linear ligands (An Ph , An Me , and An H ) with different degrees of steric groups (Ph > Me > H) introduced at the 9 and 10 position of anthracene can alter the stacking of the polymer chains and thus impact their crystallinity, charge separation, and charge transport property, which in turn impacts their photocatalytic performance for hydrogen evolution reaction.

1-D-polymer↗
DOE OSTI2023

Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia

Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber–Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N2RR). In this work, we strategically design a cost-effective bimetallic Ru–Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru 0.15 Cu 0.85 NS catalyst presents an impressive N 2 RR performance with an ammonia yield rate of 26.25 μg h –1 mg cat. –1 (corresponding to 10.5 μg h –1 cm –2 ) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Unraveling Defect-Dependent Conductivity-Type Switching in CuFe 2 O 4 for Enhanced Photoelectrocatalytic Reduction of Benzaldehyde

Photoelectrocatalytic (PEC) reduction provides a sustainable route for upgrading biomass-derived feedstocks with reduced energy requirements, yet remains largely unexplored beyond hydrogen evolution and CO 2 reduction due to the scarcity of stable photocathodes. Here, we report a defect-engineered CuFe 2 O 4 photocathode that enables directly quantified PEC reduction of benzaldehyde to benzyl alcohol using a singlecomponent, earth-abundant oxide. By controlling annealing temperature and oxygen partial pressure, CuFe 2 O 4 is systematically tuned from n-type to p-type conductivity. Electrochemical measurements, X-ray and ultraviolet photoelectron spectroscopy, and firstprinciples defect calculations collectively show that oxygen-rich annealing conditions suppress deep donor-type oxygen vacancies while stabilizing shallow acceptor-type copper vacancies, resulting in enhanced hole concentration and improved charge transport. In a mixed acetonitrile/water electrolyte employing 1,4-benzoquinone as a redox mediator, the optimized CuFe 2 O 4 photocathode achieves stable photoelectrochemical operation over 18 h under continuous illumination with a benzyl alcohol production rate of 2.57 μmol/h at −0.50 V vs Ag/AgNO 3 , corresponding to a Faradaic efficiency of 51.3%. This PEC approach lowers the required applied potential by ∼1 V compared to traditional electrocatalytic methods, offering a more energy-efficient route for carbonyl reduction. These findings establish CuFe 2 O 4 as a viable photocathode platform for sustainable photoelectrocatalytic organic transformations under mild reaction conditions.

benzaldehyde reduction↗
DOE OSTI2026

Intrinsically Conductive {pi}‑d Conjugated Layers with Co–N4 Active Sites for Efficient Nitrate Electrocatalysis and Zinc-Nitrate Batteries

Electrochemical synthesis of ammonia from nitrate has been extensively investigated as a potential alternative to the energy-intensive Haber-Bosch process. This approach not only operates under ambient conditions but also simultaneously removes nitrate contaminants while producing ammonia as a value-added product. However, the ongoing quest lies in designing an efficient electrocatalyst that achieves a high ammonia yield rate, high selectivity, and long-term stability. Herein, we report the outstanding performance of a Co–N4 coordinated π-d layered Co3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) in nitrate electrocatalysis. The unique combination of abundant Co–N4 active sites and superior electrical conductivity enables significant electrocatalytic activity, delivering a maximum ammonia yield rate of 56.8 mg cm–2 h–1 at −0.8 V vs RHE and a Faradaic efficiency of ∼91% at −0.4 V vs RHE. Mechanistic analysis reveals that alkaline conditions accelerate water dissociation to generate adsorbed hydrogen intermediates (H*), which are utilized by Co–N4 sites to drive the stepwise hydrogenation of nitrate to ammonia while suppressing competing hydrogen evolution reaction (HER) pathways. Furthermore, integration of this catalyst into a zinc-nitrate battery resulted in a maximum power density of 5.3 mW cm–2 and an open-circuit potential of ∼1.45 V. These results highlight the potential of π-d conjugated Co–N4 materials as an efficient catalyst for both environmental remediation and energy conversion.

Namvar, shahrirar↗
DOE OSTI2026

Syngas Production at Si Hybrid Photoelectrodes Modified with Re(I) and Mn(I) Tricarbonyl Phenanthroline Complexes Containing Reactive Aryl Azide Groups

We installed molecular CO 2 reduction (CO 2 R) catalysts directly onto Si (photo)electrodes. The highly reactive M(5-azido-1,10-phenanthroline)(CO) 3 X (where M = Mn or Re, X = Br or Cl) complexes readily bubbled when dissolved in polar organic solvents, in both the presence and absence of an ultraviolet light source. When placed on hydrogen-terminated Si (H-Si) and native silicon oxide (SiOx), similar amounts of the complex were attached to the surface under illumination (367 nm, 50–200 mW/cm 2 ) or in the dark. Surprisingly, these films revealed submonolayer coverages instead of the multilayered structures we expected. DFT analyses support monolayer formation, showing that the triplet-state nitrene of the complex is more energetically favorable than the singlet state. Using controlled-potential electrolysis experiments, we showed that Re- and Mn-containing films on pSi photoelectrodes generated small amounts of CO when exposed to 1 atm of CO 2 and 1 sun illumination. These amounts of CO were an order of magnitude greater than control surfaces, producing 5.59 × 10 –7 mol CO/h for Re(az-phen) and 7.83 × 10 –7 mol CO/h for Mn(az-phen) films. Much of the charge passed at the pSi electrodes was consumed by the competing hydrogen evolution reaction, which we attribute to the low molecular coverage and the presence of native oxide on the electrode surface after attachment. Finally, this work demonstrates the feasibility of reacting azide-containing ligands with Si surfaces. Still, it highlights the need for alternative ligand structures and reaction conditions to form multilayer films.

azides↗
DOE OSTI2024

Pathways of CdS Quantum Dot Degradation during Photocatalysis: Implications for Enhancing Stability and Efficiency for Organic Synthesis

CdS quantum dots (QDs) are widely employed as photocatalysts for reactions such as hydrogen evolution, and their degradation under aerobic aqueous conditions is well understood. However, despite evidence of aggregation and precipitation of CdS QD photocatalysts under anaerobic conditions, catalyst speciation and degradation under such conditions are underexplored. In this work, we demonstrate that during a reductive dehalogenation reaction, CdS QDs undergo surface ligand etching, which leads to a loss of colloidal stability and the formation of microcrystalline cadmium metal deposits. We hypothesize that this results from the accumulation of electrons on the QD surface. In addition, we demonstrate mild surface sulfur oxidation and the formation of an ammonium salt byproduct of a commonly used hole quencher. Furthermore, this work adds to our atomic-level understanding of the reactions occurring at the QD surface during photocatalysis, so that we can design more stable and efficient photocatalysts for organic synthesis.

cadmium sulfide↗
DOE OSTI2020

Electrokinetic Analysis of Poorly Conductive Electrocatalytic Materials

While many factors can influence the activity of the electrochemical interface at atomic and molecular levels, the electron and ion transport have a big impact on the overall electrochemical performance. Here, we investigate how electrical resistance (conductivity) of the electrode affects the measured electrocatalytic activity using the hydrogen evolution reaction as a model reaction. We clearly demonstrate the effect of the poor electronic conductivity of MoS 2 on the electrochemical performance, as both values of the exchange current density as well as the Tafel slope depend on the level of utilization of the active material and the ohmic losses. A quantitative analysis using the composite electrode model is provided, showing the importance of the experimental conditions and good control of electrode/electrolyte system for the proper evaluation and comparison of electrocatalysts’ kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Correlating Oxidation State and Surface Area to Activity from Operando Studies of Copper CO Electroreduction Catalysts in a Gas-Fed Device

Copyright © 2020 American Chemical Society. The rational design of high-performance electrocatalysts requires a detailed understanding of dynamic changes in catalyst properties, including oxidation states, surface area, and morphology under realistic working conditions. Oxide-derived Cu catalysts exhibit a remarkable selectivity toward multicarbon products for the electrochemical CO reduction reaction (CORR), but the exact role of the oxide remains elusive for explaining the performance enhancements. Here, we used operando X-ray absorption spectroscopy (XAS) coupled with simultaneous measurements of the catalyst activity and selectivity by gas chromatography (GC) to study the relationship between oxidation states of Cu-based catalysts and the activity for ethylene (C2H4) production in a CO gas-fed cell. By utilizing a custom-built XAS cell, oxidation states of Cu catalysts can be probed in device-relevant settings and under high current densities (>80 mA cm-2) for the CORR. By employing an electrochemical oxidation process, we found that the Cu oxidation states and specific ion species do not correlate with C2H4 production. The difference in the CORR activity is also investigated in relation to electrochemical surface area (ECSA) changes. While the hydrogen evolution reaction (HER) activity is positively correlated to the ECSA changes, the increased C2H4 activity is not proportional to the ECSA. Ex situ characterization from microscopic techniques suggests that the changes in the C2H4 activity and selectivity may arise from a morphological transformation that evolves into a more active structure. These comprehensive results give rise to the development of a cell regeneration method that can restore the performance of the Cu catalyst without cell disassembly. Our study establishes a basis for the rational design of highly active electrocatalysts for broad-range reactions in a gas-fed device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Prediction of Highly Selective Electrocatalytic Nitrogen Reduction at Low Overpotential on a Mo-Doped g-GaN Monolayer

Identifying efficient electrocatalysts with low overpotential and high selectivity for producing ammonia from nitrogen gas is essential for any future electrocatalytic nitrogen reduction reaction (NRR)-based ammonia synthesis. Via density functional theory calculations and the computational hydrogen electrode model, we systematically examine the prospect of using a single-transition-metal (TM)-atom-doped graphene-like GaN (g-GaN) monolayer as an electrocatalyst for artificial nitrogen reduction. Among 15 TMs investigated, the Mo-doped g-GaN (Mo@g-GaN) monolayer is the only electrocatalyst predicted to be feasible for the NRR. The Mo@g-GaN monolayer satisfies all screening criteria considered for activating the inert N≡N triple bond effectively, including stabilization of the adsorbed (*) NRR intermediate *NNH and destabilization of the *NH 2 species. This monolayer also possesses sufficient overall stability. A complete analysis of the likely mechanisms involved in the NRR on this catalyst suggests that the Mo@g-GaN monolayer could exhibit promising NRR catalytic activity. It achieves this via one specific (distal) pathway, which has a very low onset potential of –0.33 V vs the reversible hydrogen electrode (RHE), corresponding to a low overpotential of 0.42 V vs the RHE, defined using the measured equilibrium potential for NRR of 0.09 V vs the RHE. The potential-determining step, conversion of *NH 2 to *NH 3 , also exhibits a surmountable barrier of 0.42 eV, suggesting kinetics will be facile. Finally, the Mo@g-GaN monolayer is predicted to exhibit substantial selectivity (~31%) toward ammonia synthesis over the competing hydrogen evolution reaction. The finding presented in this work may open a potential route for artificial ammonia synthesis using a single-atom catalyst under ambient conditions.

25 ENERGY STORAGE↗
DOE OSTI2022

Exchange Coupling Determines Metal-Dependent Efficiency for Iron- and Cobalt-Catalyzed Photochemical CO 2 Reduction

Catalysts promoting multielectron charge delocalization offer selectivity for the CO 2 reduction reaction (CO 2 RR) over the competing hydrogen evolution reaction. Here, we show metal–ligand exchange coupling as an example of charge delocalization that can determine the efficiency for photocatalytic CO 2 RR. A comparative evaluation of iron and cobalt complexes supported by the redox-active ligand tpyPY2Me establishes that the two-electron reduction of [Co(tpyPY2Me)] 2+ ([Co] 2+ ) occurs at potentials 770 mV more negative than the [Fe(tpyPY2Me)] 2+ ([Fe] 2+ ) analogue by maximizing the exchange coupling in the latter compound. The positive shift in the reduction potential promoted by metal–ligand exchange coupling drives [Fe] 2+ to be among the most active and selective molecular catalysts for photochemical CO 2 RR reported to date, maintaining up to 99% CO product selectivity with total turnover numbers (TONs) and initial turnover frequencies exceeding 30,000 and 900 min –1 , respectively. In contrast, [Co] 2+ shows much lower CO 2 RR activity, reaching only ca. 600 TON at 83% CO product selectivity under similar conditions accompanied by rapid catalyst decomposition. Further, the spin density plots of the two-electron reduced [Co] 0 complex implicate a paramagnetic open-shell doublet ground state compared to the diamagnetic open-shell singlet ground state of reduced [Fe] 0 , rationalizing the observed negative shift in two-electron reduction potentials from the [M] 2+ species and lowered CO 2 RR efficiency for the cobalt complex relative to its iron congener. This work emphasizes the contributions of multielectron metal–ligand exchange coupling in promoting effective CO 2 RR and provides a starting point for the broader incorporation of this strategy in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic and Electrochemical Control of Isostructural Ruthenium Hydricities and the Implications for Catalytic Overpotentials

Electronic tuning of metal hydrides enables precise control over potentials, mechanisms, selectivity, and rates of electrocatalytic reactions by regulating bond dissociation free energies such as the hydricity (Δ$G$ H- ° ) and $pK$ a of the catalyst. Here, we investigate a series of electronically tuned ruthenium hydrido complexes that are isostructural at the metal center: [Ru(4,4'-R 2 -bpy) 2 (CO)H] + (R = CF 3 , Cl, H, CH 3 , and CH 3 O; bpy = 2,2'-bipyridine) (denoted as (R)Ru-H+). A substantial 22 kcal mol -1 hydricity range is available across five complexes in three stable oxidation states: (R)Ru-H + , (R)Ru-H 0 , and (R)Ru-H - . Thermodynamic and mechanistic predictions of electrocatalytic proton reduction were tested experimentally by reducing protons from weak acids to H 2 . Two mechanisms are observed, depending on the acid strength and the catalyst hydricity. The rate constants for hydride transfer and protonation of the catalyst were, in some cases, extracted from the analysis of cyclic voltammetry data. A key finding is a 400 mV decrease in the catalytic overpotential for H 2 production by using a doubly reduced electron-poor metal hydride instead of a singly reduced electron-rich metal hydride. In conclusion, the former also exhibits a higher rate constant for hydride transfer, representing a strategy to disconnect rate and free energy relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗