Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Frustrated mixed-spin ladders: Evidence for a bond-order wave phase between rung-singlet and Haldane phases

In frustrated spin ladders, the interplay of frustration and correlations leads to the familiar Haldane (H) and rung-singlet (RS) phases. The nature of the transition between these two phases is still under debate. In this paper we tackle this issue using tools of quantum information theory. We consider frustrated mixed-spin-(1, 1/2) ladders with antiferromagnetic leg, rung and diagonal couplings, and calculate various quantities, such as the entanglement entropy (EE), the Schmidt gap, and the level degeneracy of the entanglement spectrum (ES). We use two numerical techniques, the infinite time-evolving block decimation (iTEBD) and the density matrix renormalization group (DMRG). We demonstrate that there exists an intermediate phase in which the ES levels do not exhibit the characteristic degeneracies of the H and RS phases. To understand the underlying physics in this phase, here we investigate short-range spin correlations along legs, rungs and diagonals and show that in this intermediate phase long-wavelength modulations occur, akin to bond-order waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Charge order and superconductivity in a two-band model for infinite-layer nickelates

The recent discovery of superconductivity in infinite-layer nickelates has drawn considerable attention; however, a consensus on the fundamental building blocks and common ingredients necessary to understand and describe their ground states and emergent properties is lacking. A series of experimental and theoretical studies have suggested that an effective two-band Hubbard model with Ni 3d x 2 -y 2 and rare-earth (R) 5d character may describe the low-energy physics. In this report we study the ground state properties of this two-band model on four-leg cylinders using the density-matrix renormalization group (DMRG) technique to better grasp whether such a simple model can embody the essential physics. A key difference compared to single-band Hubbard materials is that the system is self-doped: even at overall half-filling, the R-band acts as an electron reservoir, hole-doping the Ni-layer and fundamentally altering the physics expected from an undoped antiferromagnet. On the four-leg cylinder, the ground state is consistent with a Luttinger liquid, with anti-phase modulations of the charge density in the Ni- and R-layers having corresponding wavevectors that lock together. Light hole doping away from 1/2 filling releases the locking between the Ni and the R charge modulations, as the electron density in the R-band decreases and eventually becomes exhausted at a hole doping concentration that depends sensitively on the effective splitting between the Ni and the R orbitals. The ground state of the doped system is consistent with a Luther-Emery liquid, possessing quasi-long-range superconducting correlations in the Ni layer, similar to the single-band Hubbard model. Our results are consistent with experimental observations and may help to reveal the microscopic mechanism for pairing and other emergent properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Renormalization group analysis for the quasi-1D superconductor BaFe 2 S 3

Motivated by the discovery of superconductivity in the two-leg, quasi-one dimensional ladder compound, BaFe 2 S 3 we present a renormalization group study of electrons moving on a two leg, two orbital ladder, subjected to Hubbard repulsion U and Hund’s coupling J . In our calculations, we adopt tightbinding parameters obtained from ab-initio studies on this material. At incommensurate filling, the long wavelength analysis displays four phases as a function of 0 ≤ J/U < 1. We show that a fully gapped superconductor is stabilized at sufficiently large Hund’s coupling, the relative phases at the three Fermi points are “+,-,-”. By contrast, when the system is tuned to half filling, Umklapp scattering gives rise to Mott insulating phases. Furthermore, we discuss the general implications of our study for the broad class of iron-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

E × B Flux Driven Detachment Bifurcation in the DIII-D Tokamak

A bifurcative step transition from low-density, high-temperature, attached divertor conditions to high-density, low-temperature, detached divertor conditions is experimentally observed in DIII-D tokamak plasmas as density is increased. The step transition is only observed in the high confinement mode and only when the B × ∇B drift is directed towards the divertor. Here, this work reports for the first time a theoretical explanation and numerical simulations that qualitatively reproduce this bifurcation and its dependence on the toroidal field direction. According to the model, the bifurcation is primarily driven by the interdependence of the E × B -drift fluxes, divertor electric potential structure, and divertor conditions. In the attached conditions, strong potential gradients in the low field side (LFS) divertor drive E × B -drift flux towards the high field side divertor, reinforcing low density, high temperature conditions in the LFS divertor leg. At the onset of detachment, reduction in the potential gradients in the LFS divertor leg reduce the E × B -drift flux as well, such that the divertor plasma evolves nonlinearly to high density, strongly detached conditions. Experimental estimates of the E × B -drift fluxes, based on divertor Thomson scattering measurements, and their dependence on the divertor conditions are qualitatively consistent with the numerical predictions. Finally, the implications for divertor power exhaust and detachment control in the next step fusion devices are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Emergent Superconductivity and Competing Charge Orders in Hole-Doped Square-Lattice t – J Model

The square-lattice Hubbard and closely related t-J models are considered as basic paradigms for understanding strong correlation effects and unconventional superconductivity (SC). Recent large-scale density matrix renormalization group simulations on the extended t-J model have identified d-wave SC on the electron-doped side (with the next-nearest-neighbor hopping t 2 > 0) but a dominant charge density wave (CDW) order on the hole-doped side (t 2 < 0), which is inconsistent with the SC of hole-doped cuprate compounds. We re-examine the ground-state phase diagram of the extended t-J model by employing the state-of-the-art density matrix renormalization group calculations with much enhanced bond dimensions, allowing more accurate determination of the ground state. On six-leg cylinders, while different CDW phases are identified on the hole-doped side for the doping range δ = 1/16 – 1/8, a SC phase emerges at a lower doping regime, with algebraically decaying pairing correlations and d-wave symmetry. On the wider eight-leg systems, the d-wave SC also emerges on the hole-doped side at the optimal 1=8 doping, demonstrating the winning of SC over CDW by increasing the system width. Furthermore, our results not only suggest a new path to SC in general t-J model through weakening the competing charge orders, but also provide a unified understanding on the SC of both hole- and electron-doped cuprate superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Paradigm for approaching the forbidden spontaneous phase transition in the one-dimensional Ising model at a fixed finite temperature

The Ising model describes collective behaviors such as phase transitions and critical phenomena in various physical, biological, economical, and social systems. It is well known that spontaneous phase transition at finite temperature does not exist in the Ising model with short-range interactions in one dimension. Yet, little is known about whether this forbidden phase transition can be approached arbitrarily closely—at fixed finite temperature. Here I use symmetry analysis of the transfer matrix to reveal the existence of spontaneous ultranarrow phase crossover (UNPC) at finite temperature in one class of one-dimensional Ising models on decorated two-leg ladders, in which the crossover temperature T 0 is determined solely by on-rung interactions and decorations, while the crossover width 2 δ T is independently, exponentially reduced ( δ T = 0 means a genuine phase transition) by on-leg interactions and decorations. These findings establish a simple ideal paradigm for realizing an infinite number of one-dimensional Ising systems with spontaneous UNPC at desirable T 0 , which would be characterized in routine laboratory measurements as a genuine first-order phase transition with large latent heat thanks to the ultranarrow δ T (say less than one nanokelvin), paving a way to push the limit in our understanding of phase transitions and the dynamical actions of frustration arbitrarily close to the forbidden regime. Published by the American Physical Society 2024

1-dimensional systems↗
DOE OSTI2015

Design of a Modular E-Core Flux Concentrating Axial Flux Machine

In this paper a novel E-Core axial flux machine is proposed. The machine has a double stator-single rotor configuration with flux concentrating ferrite magnets, and pole windings across each leg of an E-Core stator. E-Core stators with the proposed flux-concentrating rotor arrangement result in better magnet utilization and higher torque density. The machine also has a modular structure facilitating simpler construction. This paper presents a single phase and a three-phase version of the E-Core machine. Case study for a 1.1 kW, 400 rpm machine for both the single phase and three-phase axial flux machine is presented. The results are verified through 3D finite element analysis.

17 WIND ENERGY↗
DOE OSTI2021

Novel Transformer with Variable Leakage and Magnetizing Inductances

This paper introduces the concept of a novel variable inductance transformer (VIT) whose leakage and magnetizing inductances can be varied dynamically and independently to aid the advancement of research in isolated power electronic converters. In this transformer, the leakage inductance can be varied by varying the length of overlap between the primary and secondary windings, while the magnetizing inductance can be varied by varying the air gap between the core legs. Individual controls for the two inductances ensure that one can be varied independent of the other, as needed to satisfy different power conversion objectives. In this paper, the analytical models of the variable leakage and magnetizing inductances are presented. Analytical results are compared with those obtained from Finite Element Method (FEM) and an experimental prototype of a VIT. Analytical solutions of the variable leakage inductance present an error of less than 2.35 % when compared to FEM solutions, while the analytical solutions of the variable magnetizing inductance present a maximum error of 1.82 % when compared to experimental measurements.

image method, leakage inductance, magnetizing indu↗
DOE OSTI2022

Design and Implementation of Automated Characterization of T-type based Power Module for PV Inverter Reliability Assessment

Reliability of power electronics holds the key for future power and energy systems since it is essential for system integration with renewables and energy storage systems. Variation of power module characteristics over the converter’s operational lifetime is a critical indicator to assess its reliability. Device characterization consists of different steps to collect, process, and visualize results, which is usually time-consuming, especially for power modules based on a non-phase-leg configuration, such as T-type circuits, widely applied for PV inverters. To reduce the time, ensure repeatability, and guarantee consistency, an automated test bench can be helpful. This paper focuses on a T-type-based power module and proposes a unique characterization platform and corresponding automation procedure and implementation. Considering the major characterization difference between T-type power modules over the conventional phase-leg power module, first, the special consideration for static characterization is highlighted. Second, the unique dynamic characterization design associated with the T-type power module is described. Finally, the automation of the power module characterization and the test platform is presented along with results and special considerations.

Siraj, Ahmed↗
DOE OSTI2019

Analysis of Dead-Time in a Single Phase Wireless Power Transfer System

In this paper, the effect of dead-time in a single phase wireless power transfer system (WPT) between the complementary switching pulses of the inverter leg is discussed in detail. The dead-time is always provided between the complementary switching pulses in the inverter leg to avoid the short-circuit of the input dc source. In WPT systems, high-frequency (HF) operation is desired to reduce the size of the passive components. As the frequency of operation increases, the dead-time effect becomes significant and must be addressed appropriately. This paper presents the analysis of the dead-time effect in the wireless power transfer system for an electric vehicle (EV) battery charging application. The operating waveforms for the given operating condition of the phase-shift angle and the power-factor are presented and the phenomenon of voltage polarity reversal (VPR) or notch is discussed. The effect of the notch on the fundamental component of the voltage is presented and the effect of the notch on the BMW i3 battery charging profile is evaluated. The theoretical analysis of the dead-time is verified using simulation results in PLECS.

Kavimandan, Utkarsh↗
DOE OSTI2016

Optimization of Transition Edge Sensor Arrays for Cosmic Microwave Background Observations With the South Pole Telescope

In this paper, we describe the optimization of transition-edge-sensor (TES) detector arrays for the third-generation camera for the South PoleTelescope. The camera, which contains similar to 16 000 detectors, will make high-angular-resolution maps of the temperature and polarization of the cosmic microwave background. Our key results are scatter in the transition temperature of Ti/Au TESs is reduced by fabricating the TESs on a thin Ti(5 nm)/Au(5 nm) buffer layer and the thermal conductivity of the legs that support our detector islands is dominated by the SiOx dielectric in the microstrip transmission lines that run along the legs.

Ding, Junjia↗
DOE OSTI2023

Operation of Dual-T-Type Modular Multilevel Converter for Uninterrupted Power Supply Under Bridge Failures

Dual-T-type modular multilevel converter (DTMMC) is an alternative to the existing uninterrupted power supply (UPS) due to its advantage in flexible leg reusing, multiple power ports, and high operating efficiency. Here, in this article, a DTMMC-UPS, which has series configurations on both input/output ac sides, obtains high-voltage grid/load accessing interfaces is presented. In the described system, the fact that copies of T-type legs are employed makes semiconductor failure common to happen. Moreover, both the coupling between rectifier and inverter conversions and the confliction between intercell and inner-cell voltage balancing make fault-tolerant control a tough issue. In this article, the switch fault types are first clarified and diagnosed by the different impacts on normal operation. An improved voltage vector modulation is then deduced to facilitate the planning of proper primary switching patterns, to achieve rectifier side normal operation. The secondary alternated level-shifted pulsed-width modulation (LS-PWM) is also modified to achieve inverter side normal operation. The experiment results are supplied to verify the validity of the modulation-coordinated fault toleration strategy.

42 ENGINEERING↗
DOE OSTI2018

Parasitic Capacitors' Impact on Switching Performance in a 10 kV SiC MOSFET Based Converter

In a converter based on 10 kV SiC MOSFETs, major sources of parasitic capacitance are the anti-parallel junction barrier schottky (JBS) diode, heat sink, and load inductor. A half bridge phase leg test setup is built to investigate these parasitic capacitors’ impact on the switching performance at 6.25 kV. Generally these parasitic capacitors slows down both turn-on and turn-off transient and can cause significant increase in switching energy loss. The impact of the parasitic capacitor in the load inductor is analyzed, which has either very short wire or long wire in series. Switching performance of the phase leg with two different thermal designs are compared to investigate the impact of the parasitic capacitor due to the heat sink. The large parasitic capacitor due to the large drain plate of discrete 10 kV SiC MOSFET for heat dissipation can result in 44.5% increase in switching energy loss at low load current.

Huang, Xingxuan↗
DOE OSTI2015

Estimated dose rates to members of the public from external exposure to patients with {sup 131}I thyroid treatment

Purpose: Estimated dose rates that may result from exposure to patients who had been administered iodine-131 ({sup 131}I) as part of medical therapy were calculated. These effective dose rate estimates were compared with simplified assumptions under United States Nuclear Regulatory Commission Regulatory Guide 8.39, which does not consider body tissue attenuation nor time-dependent redistribution and excretion of the administered {sup 131}I. Methods: Dose rates were estimated for members of the public potentially exposed to external irradiation from patients recently treated with {sup 131}I. Tissue attenuation and iodine biokinetics were considered in the patient in a larger comprehensive effort to improve external dose rate estimates. The external dose rate estimates are based on Monte Carlo simulations using the Phantom with Movable Arms and Legs (PIMAL), previously developed by Oak Ridge National Laboratory and the United States Nuclear Regulatory Commission. PIMAL was employed to model the relative positions of the {sup 131}I patient and members of the public in three exposure scenarios: (1) traveling on a bus in a total of six seated or standing permutations, (2) two nursing home cases where a caregiver is seated at 30 cm from the patient’s bedside and a nursing home resident seated 250 cm away from the patient in an adjacent bed, and (3) two hotel cases where the patient and a guest are in adjacent rooms with beds on opposite sides of the common wall, with the patient and guest both in bed and either seated back-to-back or lying head to head. The biokinetic model predictions of the retention and distribution of {sup 131}I in the patient assumed a single voiding of urinary bladder contents that occurred during the trip at 2, 4, or 8 h after {sup 131}I administration for the public transportation cases, continuous first-order voiding for the nursing home cases, and regular periodic voiding at 4, 8, or 12 h after administration for the hotel room cases. Organ specific activities of {sup 131}I in the thyroid, bladder, and combined remaining tissues were calculated as a function of time after administration. Exposures to members of the public were considered for {sup 131}I patients with normal thyroid uptake (peak thyroid uptake of ∼27% of administered {sup 131}I), differentiated thyroid cancer (DTC, 5% uptake), and hyperthyroidism (80% uptake). Results: The scenario with the patient seated behind the member of the public yielded the highest dose rate estimate of seated public transportation exposure cases. The dose rate to the adjacent room guest was highest for the exposure scenario in which the hotel guest and patient are seated by a factor of ∼4 for the normal and differentiated thyroid cancer uptake cases and by a factor of ∼3 for the hyperthyroid case. Conclusions: It was determined that for all modeled cases, the DTC case yielded the lowest external dose rates, whereas the hyperthyroid case yielded the highest dose rates. In estimating external dose to members of the public from patients with {sup 131}I therapy, consideration must be given to (patient- and case-specific) administered {sup 131}I activities and duration of exposure for a more complete estimate. The method implemented here included a detailed calculation model, which provides a means to determine dose rate estimates for a range of scenarios. The method was demonstrated for variations of three scenarios, showing how dose rates are expected to vary with uptake, voiding pattern, and patient location.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Sci-Fri PM: Radiation Therapy, Planning, Imaging, and Special Techniques - 07: Transitioning from extended-distance total body irradiation to optimized VMAT total marrow irradiation

Purpose: TMI targets only the bone marrow, with the intent of sparing normal tissues. The NSCC has recently implemented a TMI protocol which includes VMAT fields to treat the bone marrow from head to mid-thigh and extended SSD POP fields to treat the lower legs. This work describes the commissioning and initial clinical results of the first reported VMAT TMI treatments in Canada. Methods: Detailed CT simulation, imaging, planning and treatment procedures were developed by a multi-disciplinary team. Patients have 1 cm of bolus over the lower legs and 0.5 cm of bolus around the lower arms. The PTV includes all bone, except mandible, facial bones and hands, with the objective of V(12 Gy) > 90%. Detailed analysis of the influence of field overlap was performed to determine optimal field placement and image-guidance tolerances. Results: PTV coverage was achieved for all cases as V(12 Gy) ranged from 90.4–96.3%. The minimum dose to the PTV, D(99%), ranged from 91.4–97.87% and V(90%Rx=10.8 Gy) ranged from 99.1–100.0%. The lungs, liver and heart had an average D{sub mean} of (7.8±0.3)Gy/(65±2)%, (7.6±0.7)Gy/(63±5)%, and (6.8±0.4)Gy/(56±4)% respectively. Conclusions: Commissioning required input and collaboration from all team members. Transitioning from TBI to TMI requires additional time for contouring, treatment planning, QA, and treatment. Patient benefit can however be seen in the quality of OAR sparing.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

New Direction in the Application of Thermoelectric Energy Converters

In southern countries, including European states, solar collectors for additional water-heating systems are widely used. However, the disadvantage of such systems is that a considerable proportion of solar energy cannot be used with increasing water temperature and dissipates into the environment. It is proposed to use waste heat at a high temperature, which is supplied to a thermoelectric generator (TEG) operating on the basis of a temperature difference between the hot water in the solar collector and cold water supplied to a radiator on the other TEG side. This is a new application of thermoelectric converters, in which the converter can act not only as a source of electrical energy but also as a source of low-potential heat coming from the radiator. The total conversion efficiency in such devices can reach 90%. It is shown that the use of p-type legs in a TEG with the cleavage planes of the legs parallel to the heat-flux direction instead of the conventional parallel orientation results in an increase in the thermoelectric efficiency by 25% on average in the temperature range of 100–300°C.

14 SOLAR ENERGY↗