Search NASA⌕ Search

SEARCH · Search NASA

Results for “Linear Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Using system identification in modeling the yaw response of tail fins for small wind turbines with bearing friction

Here, we describe three main developments of our previous study of the nonlinear yaw dynamics of the tail fins for small wind turbines [Khedr et al., J. Renewable Sustainable Energy 16, 053305 (2024)]. First, the model constants derived from archived computational and experimental studies are adjusted by employing system identification (SI) to maximize the model's agreement with wind tunnel tests. This adjustment was done for high wind speeds, where yaw bearing friction can be ignored. When starting a turbine at low wind speed, however, friction can become important. Our second development is to implement a model for the frictional resistive torque and use SI to maximize its accuracy. These developments used wind tunnel experiments on generic delta, elliptical, and rectangular planforms that were described by Khedr et al. [J. Renewable Sustainable Energy 16, 053305 (2024)]. Since the aerodynamic and friction models employ a large number of constants, we describe ways to constrain the values using linearized solutions of the response equations for small and large yaw angles. Third, we test the generality of the aerodynamic and friction modeling using the complex planform from a commercial small turbine, for which limited theoretical and computational guidance is available in selecting the model constants. The model implemented with SI is shown to provide an accurate description of the yaw response of the complex planform. Guidelines are given for the use of wind tunnel tests to determine the model constants for tail fins of any planform.

17 WIND ENERGY↗
DOE OSTI2025

Solving sparse finite element problems on neuromorphic hardware

The finite element method (FEM) is one of the most important and ubiquitous numerical methods for solving partial differential equations (PDEs) on computers for scientific and engineering discovery. Applying the FEM to larger and more detailed scientific models has driven advances in high-performance computing for decades. Here we demonstrate that scalable spiking neuromorphic hardware can directly implement the FEM by constructing a spiking neural network that solves the large, sparse, linear systems of equations at the core of the FEM. We show that for the Poisson equation, a fundamental PDE in science and engineering, our neural circuit achieves meaningful levels of numerical accuracy and close to ideal scaling on modern, inherently parallel and energy-efficient neuromorphic hardware, specifically Intel’s Loihi 2 neuromorphic platform. We illustrate extensions to irregular mesh geometries in both two and three dimensions as well as other PDEs such as linear elasticity. Our spiking neural network is constructed from a recurrent network model of the brain’s motor cortex and, in contrast to black-box deep artificial neural network-based methods for PDEs, directly translates the well-understood and trusted mathematics of the FEM to a natively spiking neuromorphic algorithm.

Applied mathematics↗
DOE OSTI2024

Harmonizing tau positron emission tomography in Alzheimer's disease: The CenTauR scale and the joint propagation model

Abstract INTRODUCTION Tau‐positron emission tomography (PET) outcome data of patients with Alzheimer's disease (AD) cannot currently be meaningfully compared or combined when different tracers are used due to differences in tracer properties, instrumentation, and methods of analysis. METHODS Using head‐to‐head data from five cohorts with tau PET radiotracers designed to target tau deposition in AD, we tested a joint propagation model (JPM) to harmonize quantification (units termed “CenTauR” [CTR]). JPM is a statistical model that simultaneously models the relationships between head‐to‐head and anchor point data. JPM was compared to a linear regression approach analogous to the one used in the amyloid PET Centiloid scale. RESULTS A strong linear relationship was observed between CTR values across brain regions. Using the JPM approach, CTR estimates were similar to, but more accurate than, those derived using the linear regression approach. DISCUSSION Preliminary findings using the JPM support the development and adoption of a universal scale for tau‐PET quantification. Highlights Tested a novel joint propagation model (JPM) to harmonize quantification of tau PET. Units of common scale are termed “CenTauRs”. Tested a Centiloid‐like linear regression approach. Using five cohorts with head‐to‐head tau PET, JPM outperformed linearregressionbased approach. Strong linear relationship was observed between CenTauRs values across brain regions.

Neurosciences & Neurology↗
DOE OSTI2024

Quasilinear modelling of collisional trapped electron modes

The simplification of collision operators is necessary for quasilinear turbulence modelling used with integrated modelling frameworks, such as the gyrokinetic code QuaLiKiz. The treatment of collisions greatly impacts the accuracy of trapped electron mode (TEM) modelling, which is necessary to predict the electron heat flux and the balance between inward and outward particle fluxes. In particular, accurate particle flux predictions are necessary to successfully model density peaking in the tokamak core. We explored two ways of improving collisional TEM model reduction for tokamak core plasmas. First, we carried out linear GENE simulations to study the complex interplay between collisions and trapped electrons. We then used these simulations to define an effective trapped fraction to characterize the collisional TEM based on two key parameters, the local inverse-aspect ratio $\epsilon$ and the collisionality $\nu ^\ast$. One aspect missing from analytical TEM research is that the collisional frequency and the bounce-transit frequency are both velocity dependent; this effective trapped fraction takes both into account. In doing so, we determined that two parameters are not enough to model the collisional TEM, as an additional third free parameter was necessary. We determined that this model, as currently formulated, is not suitable for integrated modelling purposes. Second, we directly improved QuaLiKiz's Krook operator, which relies on two free parameters. We determined that these parameters required adjustments against higher-fidelity collisional models. In order to improve density profile predictions when paired with integrated models, we refined the Krook operator by using GENE simulations as a higher-fidelity point of comparison. We then demonstrate strong improvement of density peaking predictions of QuaLiKiz within the integrated modelling framework JETTO.

fusion plasma↗
DOE OSTI2026

Extreme-scale EV charging infrastructure planning for last-mile delivery using high-performance parallel computing

Here, this paper addresses stochastic charger location and allocation problems under queue congestion for last-mile delivery using electric vehicles (EVs). The objective is to decide where to open charging stations and how many chargers of each type to install, subject to budgetary and waiting-time constraints. We formulate the problem as a mixed-integer non-linear program, where each station-charger pair is modeled as a multiserver queue with stochastic arrivals and service times to capture the notion of waiting in fleet operations. The model is extremely large, with billions of variables and constraints for a typical metropolitan area; even loading the model in solver memory is difficult, let alone solving it. To address this challenge, we develop a Lagrangian-based dual decomposition framework that decomposes the problem by station and leverages parallelization on high-performance computing systems, where the subproblems are solved by using a cutting plane method and their solutions are collected at the master level. We also develop a three-step rounding heuristic to transform the fractional subproblem solutions into feasible integral solutions. Computational experiments on data from the Chicago metropolitan area with hundreds of thousands of households and thousands of candidate stations show that our approach produces high-quality solutions in cases where existing exact methods cannot even load the model in memory. We also analyze various policy scenarios, demonstrating that combining existing depots with newly built stations under multiagency collaboration substantially reduces costs and congestion. These findings offer a scalable and efficient framework for developing sustainable large-scale EV charging networks.

Capacity allocation↗
DOE OSTI2025

Metrics and extrapolation of resonant magnetic perturbation thresholds for ELM suppression

This large database study of resonant magnetic perturbation (RMP) edge localized mode (ELM) suppression thresholds in the AUG, DIII-D, EAST, and KSTAR tokamaks details the key strengths and weaknesses of RMP metrics. The RMP ELM suppression database used for this work contains plasma information at the time of transition from ELMing to ELM suppressed states where a clear experimental threshold is identified. The experimental threshold distributions are compared for five metrics: (1) the island overlap width, (2) pedestal top Chirikov overlap, (3) peeling edge displacement, (4) pedestal top resonant drive, and (5) edge dominant mode overlap. The distributions, the regularity of the dependence on RMP coil currents, and the sensitivities of a given metric to equilibrium reconstruction details are compared. The overlap metric proves to be a good compromise between including the appropriate plasma response physics and maintaining a numerical robustness. This quantity does not exhibit clear power-law scalings for projection, but machine learning can assist in predicting thresholds within the existing parameter ranges and providing uncertainty quantification of those predictions. Two new first-principles models, one utilizing a threshold from the non-linear Modified Rutherford equation evaluated at the pedestal top and one utilizing the SLAYER code to calculate the linear tearing threshold from torque balance, offer possible paths to extrapolation beyond the existing database parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Kinetic modeling of hot tail runaway electron generation during plasma disruptions using the JOREK code

The generation of runaway electrons (REs) during disruptions poses a significant challenge for the operation of tokamaks. The production of these high-energy electrons can cause substantial damage, particularly when the plasma current is high, making it a critical concern for ITER. For the high-temperature plasmas anticipated in ITER, the primary generation of REs may be dominated by the hot tail mechanism, which consists of the acceleration of hot electrons from the pre-disruption population which have not yet thermalized with the bulk following the rapid cooling of the plasma. To account for the significant 3D effects on RE production, a hot tail modeling framework has been developed within the non-linear 3D extended MHD code JOREK. This paper presents the structure of this framework, which is based on test electrons evolving in MHD fields. The verification of the method shows good agreement with the reference DREAM code for 0D test cases, as well as for axisymmetric simulations of 15 MA ITER H-mode disruption scenarios. Furthermore, a proof-of-principle application to a DIII-D case demonstrates the framework’s capability to capture for the first time the hot tail generation in 3D MHD simulations in realistic geometry. Preliminary results suggest that the production of REs is significantly reduced by stochastic losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

It is not σ 8 : constraining the non-linear matter power spectrum with the Dark Energy Survey Year-5 supernova sample

The weak gravitational lensing magnification of Type Ia supernovae (SNe Ia) is sensitive to the matter power spectrum on scales $k\gt 1 h$ Mpc$^{-1}$, making it unwise to interpret SNe Ia lensing in terms of power on linear scales. We compute the probability density function of SNe Ia magnification as a function of standard cosmological parameters, plus an empirical parameter $A_{\rm mod}$ which describes the suppression or enhancement of matter power on non-linear scales compared to a cold dark matter only model. While baryons are expected to enhance power on the scales relevant to SN Ia lensing, other physics such as neutrino masses or non-standard dark matter may suppress power. Using the Dark Energy Survey Year-5 sample, we find $A_{\rm mod} = 0.77^{+0.69}_{-0.40}$ (68 per cent credible interval around the median). Although the median is consistent with unity there are hints of power suppression, with $A_{\rm mod} \lt 1.09$ at 68 per cent credibility.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Validation Framework for Post-Combustion Carbon Capture CFD Simulations

First-principles based computational fluid dynamics (CFD) simulations are proposed as a fundamental tool for investigating solvent-based CO2 absorption in packed columns, due to the ability to accurately represent the underlying non-linear multiscale dynamics. In this work, we employ such models to investigate hydrodynamics of columns with structured by assessing the key hydrodynamic metrics, such as pressure drop and liquid holdup. Our models are validated with experimental data from a specifically designed column for this line of work. The test cases of gas and liquid flowrates and operating conditions were selected through a comprehensive sequential design of experiments approach offered by the CCSI2 toolset.

Panagakos, Grigorios↗
DOE OSTI2025

Final Technical Report: Testing the robustness of CMB-S4 inflation measurements to foreground models

This report summarizes the research activities for DOE award SC0024462, which focused on enhancing the robustness of CMB-S4 inflation measurements by characterizing and mitigating Galactic foreground interference. The project grounded foreground models in the physical processes of the Interstellar Medium with MHD and semi-analytic filament models, and developed analysis pipelines, such as Needlet Internal Linear Combination (NILC) techniques, to isolate faint cosmological signals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Mapping Spiking Neural Networks to Heterogeneous Crossbar Architectures using Integer Linear Programming

Advances in novel hardware devices and architectures allow Spiking Neural Network (SNN) evaluation using ultra-low power, mixed-signal, memristor crossbar arrays. As individual network sizes quickly scale beyond the dimensional capabilities of single crossbars, networks must be mapped onto multiple crossbars. Crossbar sizes within modern Memristor Crossbar Architectures (MCAs) are determined predominately not by device technology but by network topology; more, smaller crossbars consume less area thanks to the high structural sparsity found in larger, brain-inspired SNNs. Motivated by continuing increases in SNN sparsity due to improvements in training methods, we propose utilizing heterogeneous crossbar sizes to further reduce area consumption. This approach was previously unachievable as prior compiler studies only explored solutions targeting homogeneous MCAs. Our work improves on the state-of-the-art by providing Integer Linear Programming (ILP) formulations supporting arbitrarily heterogeneous architectures. By modeling axonal interactions between neurons, our methods produce better mappings while removing inhibitive a priori knowledge requirements. We first show a 16.7-27.6% reduction in area consumption for square-crossbar homogeneous architectures. Then, we demonstrate 66.9-72.7% further reduction when using a reasonable configuration of heterogeneous crossbar dimensions. Next, we present a new optimization formulation capable of minimizing the number of inter-crossbar routes. When applied to solutions already near-optimal in area, an 11.9-26.4% routing reduction is observed without impacting area consumption. Finally, we present a profile-guided optimization capable of minimizing the number of runtime spikes between crossbars. Compared to the best-area-then-route optimized solutions, we observe a further 0.5-14.8% inter-crossbar spike reduction while requiring 1–3 orders of magnitude less solver time.

Pohl, Devin [ORNL] (ORCID:0009000040149027)↗
DOE OSTI2024

Numerical modelling of impact seismic sources using the stress glut theory

SUMMARY Meteorite impacts have proved to be a significant source of seismic signal on the Moon, and have now been recorded on Mars by InSight seismometers. Understanding how impacts produce seismic signal is key to the interpretation of this unique data, and to improve their identification in continuous seismic records. Here, we use the seismic Representation Theorem, and particularly the stress glut theory, to model the seismic motion resulting from impact cratering. The source is described by equivalent forces, some resulting from the impactor momentum transfer, and others from the stress glut, which represents the mechanical effect of plasticity and non linear processes in the source region. We condense these equivalent forces into a point-source with a time-varying single force and nine-component moment tensor. This analytical representation bridges the gap between the complex dynamics of crater formation, and the linear point-source representation classically used in seismology. Using the multiphysics modelling software HOSS, we develop a method to compute the stress glut of an impact, and the associated point-source from hypervelocity impact simulations. For a vertical and an oblique impact at 1000 m s−1, we show that the moment tensor presents a significant deviatoric component. Hence, the source is not an ideal isotropic explosion contrary to previous assumptions, and draws closer to a double couple for the oblique impact. The contribution of the point force to the seismic signal appears negligible. We verify this model by comparing two signals: (1) HOSS is coupled to SPECFEM3D to propagate the near-source signal elastically to remote seismic stations; (2) the point-source model derived from the stress-glut theory is used to generate displacements at the same distance. The comparison shows that the point-source model is accurately simulating the low-frequency impact seismic waveform, and its seismic moment is in trend with Lunar and Martian impact data. High-frequencies discrepancies exist, which are partly related to finite-source effects, but might be further explained by the difference in mathematical framework between classical seismology and HOSS’ numerical modelling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Improved Weld Residual Stress Modeling System in BlackBear

This report presents enhancements to the MOOSE-based BlackBear application aimed at improving its capability to simulate welding and other thermo-mechanical manufacturing processes. Two primary avenues of improvement are pursued. First, to enhance user accessibility, we introduce a centralized default block restriction mechanism that ensures coverage checks are performed within user-specified default blocks. This default setting is applied consistently to all block-describable objects, such as variables, kernels, and more. In addition, we develop a modular action for moving heat source simulations, which integrates path file parsing, subdomain modification, and heat source kernel enforcement into a single, streamlined configuration. Second, to improve solver robustness, we implement an alternative method for assigning initial conditions to the updated active domain during the simulation, thereby enhancing convergence behavior. To validate the framework, we design and conduct several benchmark simulations, including heat conduction with progressive material addition, linear elasticity with time-dependent material deposition, and viscoplasticity model with isotropic hardening under similar conditions. Finally, we demonstrate the effectiveness of the proposed framework through large-scale thermo-mechanical welding simulations in both two and three dimensions.

42 ENGINEERING↗
DOE OSTI2024

Geographical Insights into Suicide Mortality Through Spatial Machine Learning

Suicide mortality is a leading cause of death in the United States, with an upward trend that emphasizes its significance as a public health issue. Previous research has employed global models like ordinary least squares (OLS) regression and local models such as geographically weighted regression (GWR). While local models are useful for analyzing spatial variations in suicide mortality, they share limitations with traditional global models, particularly about their inability to handle multi-collinearity and non-linear relationships. Machine learning approaches, like random forests (RF), can address some of these limitations but often fail to account for spatial variability. This gap highlights the need for spatial ML models specifically designed to tackle suicide mortality. This research seeks to fill this void by using a geographically weighted random forest model (GWRF) to examine the associations between county-level suicide mortality in the U.S. from 2010 to 2020 and various social and environmental determinants of health. A key aspect of our methodology is disciplined feature selection, which reduces the pool of explanatory variables by about 90%. This refinement enhances the explanatory power of both global (R2 improved from 0.59 to 0.67) and local (R2 improved from 0.64 to 0.67) RF models while reducing their run times. An analysis of the importance scores for these selected features reveals that the drivers of suicide mortality vary by context. Thus, to effectively address regional disparities and inform targeted public health interventions, a holistic approach that incorporates multiple county-level characteristics is essential.

Lebakula, Viswadeep [ORNL] (ORCID:0000000152935914↗
DOE OSTI2025

Water Temperature, Prey Concentration and Salmonid Density Influence Daily Growth of Wild Juvenile Salmonids in Tributaries of the Upper Salmon River, Idaho ( USA )

ABSTRACT Theory, experiments and field studies indicate that the somatic growth rate of freshwater consumers is shaped by the individual, additive and multiplicative effects of multiple factors, including consumer size and condition, temperature, prey resources and biotic interactions. While our understanding of how these factors affect wild populations of freshwater consumers is improving, the topic remains poorly studied, especially with respect to mobile species. Here, we report on an 8‐year, seven‐stream ( n = 49 stream‐year combinations) observational study examining the individual and interactive effects of invertebrate prey concentration (F, mg/m 3 ), mean daily water temperature (T, °C) and juvenile Chinook salmon ( Oncorhynchus tshawytscha ) density (D, fish/100 m 2 ) on summer daily growth rates (%/d) of mobile, anadromous, juvenile Chinook salmon (age‐0+, n = 382) and sub‐yearling (age‐0+, n = 61) and yearling (age‐1+) steelhead trout ( O. mykiss , n = 70) rearing in cold (mean daily summer: 12.1°C, range: 4.2°C–16.7°C) mountain tributaries of the Salmon River basin in central Idaho (USA). AIC c model selection indicated that daily juvenile salmonid growth positively correlated with water temperature, prey biomass concentration, local juvenile Chinook density and the interaction between water temperature and food but with species and age‐specific differences. Water temperature was a covariate in all top‐ranked models, with daily growth (%/day) rate increasing (0.05%–0.23%/d) linearly with mean daily summer water temperature. In addition to a direct positive relationship with daily growth rate, there was evidence that prey concentration positively interacted with water temperature to accelerate daily growth (F × T). The positive relationship between juvenile salmonid daily growth rate and juvenile Chinook density is difficult to explain and could result from confounding factors. The individual success observed in these streams may contribute to population‐level benefits for the focal consumers, as prey‐rich, warm summers may result in larger individuals with higher energy reserves at the end of the summer/autumn growing season, contributing to improved overwinter survival. Our results, taken in combination with evidence from models, experiments and observational studies, have climate change implications. Current and predicted increases in water temperature will necessitate higher rates of prey consumption by aquatic ectothermic consumers to offset accelerated metabolic demands. Thus, to improve the resilience of mobile freshwater consumers in a warming climate, we suggest that natural resource managers not only consider physical and chemical habitat conditions but also biotic conditions, including the spatiotemporal quantity and quality of prey resources.

Kiffney, Peter. M. [Fish Ecology, Northwest Fisher↗
DOE OSTI2026

Latent space dynamics identification for interface tracking with application to shock-induced pore collapse

Capturing sharp, evolving interfaces remains a central challenge in reduced-order modeling, especially when data is limited and the system exhibits localized nonlinearities or discontinuities. Here, we propose LaSDI-IT (Latent Space Dynamics Identification for Interface Tracking), a data-driven framework that combines low-dimensional latent dynamics learning with explicit interface-aware encoding to enable accurate and efficient modeling of physical systems involving moving material boundaries. At the core of LaSDI-IT is a revised autoencoder architecture that jointly reconstructs the physical field and an indicator function representing material regions or phases, allowing the model to track complex interface evolution without requiring detailed physical models or mesh adaptation. The latent dynamics are learned through linear regression in the encoded space and generalized across parameter regimes using Gaussian process interpolation with greedy sampling. We demonstrate LaSDI-IT on the problem of shock-induced pore collapse in high explosives, a process characterized by sharp temperature gradients and dynamically deforming pore geometries. The method achieves relative prediction errors below 9% across the parameter space, accurately recovers key quantities of interest such as pore area and hot spot formation, and matches the performance of dense training with only half the data. This latent dynamics prediction was 10 6 times faster than the conventional high-fidelity simulation, proving its utility for multi-query applications. These results highlight LaSDI-IT as a general, data-efficient framework for modeling discontinuity-rich systems in computational physics, with potential applications in multiphase flows, fracture mechanics, and phase change problems.

Gaussian process↗
DOE OSTI2024

Coupled Experimental/Computational Investigation of the Dynamics of Interacting Magnetized Plasmas

The interaction, or interpenetration, of magnetized plasmas of different density and/or pressure occurs in a wide variety of natural and man-made systems. Such systems include extragalactic jets propagating into the intergalactic medium, solar coronal mass ejections into background solar wind, compact toroid (CT) fueling of magnetic fusion plasmas, and jets of capsule shell impurities into DT fusion fuel, which can lead to enhanced impurity mix in inertial fusion implosions. These plasmas may take the form of jets, with open, helical magnetic structure, or plasma “bubbles” with closed magnetic fields (B-fields), such as spheromaks or CT’s. Such structures, both open and closed B-field cases, can transport heat, particles and magnetic flux or magnetic helicity into background plasma regions. For example, the origin of extragalactic magnetic fields may be due, at least in part, to transport by astrophysical jets. The goal of this proposed work was to elucidate the detailed plasma and magnetic field dynamics of high-density plasma jets (open B-field) and bubbles (closed B-field) propagating into lower density background magnetized plasma through controlled laboratory experiments and closely coupled nonlinear MHD modeling. These experiments were conducted in the HelCat (Helicon-Cathode) linear plasma device at the University of New Mexico (UNM). Plasma jets and bubbles were launched via an existing compact coaxial plasma gun, mounted on the HelCat device. This gun produced plasmas tens of cm in scale and lasting tens of microseconds, thereby allowing detailed multipoint, space- and time-resolved measurements to be made routinely. The experiments were directly modeled using the extended magnetohydrodynamic (XMHD) PERSEUS code, developed at Cornell University [23,24]. Both experimental and numerical modeling work are ongoing. The main results to date are reported here. Additional supplemental funding for one year (8/1/2019 – 7/31/2020) supported numerical investigation of photoionization processes important in many low temperature plasmas, including the HelCat device. Initial results of this modeling work is also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗