Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC FIELD CONFIGURATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Studying fast wave propagation and absorption at any cyclotron harmonic using a 2D finite element area coordinates wave equation solver

Fourier analysis in the poloidal direction is a standard ingredient in present-day 2D wave equation solvers describing radio frequency waves in hot tokamak plasmas. Although a powerful and elegant technique, Fourier analysis has the disadvantage that a large number of modes is needed to describe the field pattern on a magnetic surface if a short wavelength mode exists on any - even very small - subpart of the particle trajectory. The present paper examines the potential of a method that does not suffer from this drawback: a finite element technique relying on simple linear or cubic area base functions that are defined on irregular elementary surfaces of triangular shape. The wave equation is solved in its weak Galerkin variational form and for realistic 2D tokamak geometry, accounting for the toroidal curvature but assuming the toroidal angle is ignorable, allowing to study the wave pattern for each of the independent toroidal modes excited by the antenna individually.The locally uniform full hot plasma dielectric tensor to all orders in finite Larmor radius was adopted. As the main intended application is the study of fast wave behavior (heating and current drive) at arbitrary harmonics, the wave vector complex amplitude appearing in the dielectric tensor is determined through a local dispersion root evaluation. High frequency fast wave propagation and damping is provided as an illustration in view of possible application of this type of current drive in future high density reactor-like tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Current Start-up Experiment using Waves in the Lower Hybrid Frequency Range in TST-2

Noninductive plasma current (I{sub p}) start-up experiments using RF power in the lower hybrid frequency range are being conducted on the TST-2 spherical tokamak. The lower hybrid wave (LHW) has demonstrated efficient current drive in conventional tokamaks. However, in spherical tokamak (ST) plasmas with very high dielectric constants (;{epsilon}{approx}{omega}{sub pe}{sup 2}/{Omega}{sub e}{sup 2}>>1), accessibility of the LHW to the plasma core is severely limited. Our approach is to keep the plasma density low (such that {epsilon}{approx}1) during I{sub p} ramp-up. Once I{sub p} reaches a level sufficiently high for neutral beam current drive, plasma can be densified and transformed into an advanced tokamak plasma dominated by the self-driven bootstrap current. Initial plasma start-up experiments were performed on TST-2 using a combline antenna which excites a traveling fast wave. After formation of toroidal flux surfaces, RF power and vertical field were ramped up to increase I{sub p}. Up to 12 kA of Ip has been obtained by this method. Soft X-ray measurements indicate that the electron temperature increases as I{sub p} increases, and hard X-ray spectroscopy indicates that energetic electrons build up as I{sub p} is ramped up.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of High Energy Tail Electrons by Electron Bernstein Waves during the Current Start-up Discharges in the LATE Device

Toroidal plasma current is started and ramped up by injecting microwave power in the electron cyclotron range of frequency without induction in the LATE device. Radial scanning with hard X-ray pulse height analysis reveals the production of high energy electrons with average energy {approx}100 keV in the radial region from R = 28 cm to 40.5 cm, which are heated by electron Bernstein wave. The radial profile of photon counts in the energy range from 25 to 200 keV is very similar to that of perpendicular pressure obtained by magnetic measurement and equilibrium analysis, suggesting that a significant portion of trapped electrons exists outside the last closed flux surface. The plasma current inside the LCFS is carried mainly by passing electrons, while some portion of the outside current may be generated as a result of the toroidal precession of trapped electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GDT-based neutron source with multiple-mirror end plugs

We present a new linear trap to be built at the Budker Institute. It combines gasdynamictype central cell with sloshing ions for beam fusion and the multiple-mirror end plugs for improved axial confinement. Thus it is designed as an efficient neutron source and a testbed for future development of mirror-based fusion reactors.

07 ISOTOPE AND RADIATION SOURCES↗

Bootstrap current for the edge pedestal plasma in a diverted tokamak geometry

The edge bootstrap current plays a critical role in the equilibrium and stability of the steep edge pedestal plasma. The pedestal plasma has an unconventional and difficult neoclassical property, as compared with the core plasma. It has a narrow passing particle region in velocity space that can be easily modified or destroyed by Coulomb collisions. At the same time, the edge pedestal plasma has steep pressure and electrostatic potential gradients whose scale-lengths are comparable with the ion banana width, and includes a magnetic separatrix surface, across which the topological properties of the magnetic field and particle orbits change abruptly. A drift-kinetic particle code XGC0, equipped with a mass-momentum-energy conserving collision operator, is used to study the edge bootstrap current in a realistic diverted magnetic field geometry with a self-consistent radial electric field. When the edge electrons are in the weakly collisional banana regime, surprisingly, the present kinetic simulation confirms that the existing analytic expressions [represented by O. Sauter et al., Phys. Plasmas 6, 2834 (1999)] are still valid in this unconventional region, except in a thin radial layer in contact with the magnetic separatrix. The agreement arises from the dominance of the electron contribution to the bootstrap current compared with ion contribution and from a reasonable separation of the trapped-passing dynamics without a strong collisional mixing. However, when the pedestal electrons are in plateau-collisional regime, there is significant deviation of numerical results from the existing analytic formulas, mainly due to large effective collisionality of the passing and the boundary layer trapped particles in edge region. In a conventional aspect ratio tokamak, the edge bootstrap current from kinetic simulation can be significantly less than that from the Sauter formula if the electron collisionality is high. On the other hand, when the aspect ratio is close to unity, the collisional edge bootstrap current can be significantly greater than that from the Sauter formula. Rapid toroidal rotation of the magnetic field lines at the high field side of a tight aspect-ratio tokamak is believed to be the cause of the different behavior. A new analytic fitting formula, as a simple modification to the Sauter formula, is obtained to bring the analytic expression to a better agreement with the edge kinetic simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical magnetohydrodynamic simulations of expanding flux ropes: Influence of boundary driving

The expansion dynamics of a magnetized, current-carrying plasma arch is studied by means of time-dependent ideal MHD simulations. Initial conditions model the setup used in recent laboratory experiments that in turn simulate coronal loops [J. Tenfelde et al., Phys. Plasmas 19, 072513 (2012); E. V. Stenson and P. M. Bellan, Plasma Phys. Controlled Fusion 54, 124017 (2012)]. Boundary conditions of the electric field at the “lower” boundary, intersected by the arch, are chosen such that poloidal magnetic flux is injected into the domain, either localized at the arch footpoints themselves or halfway between them. These conditions are motivated by the tangential electric field expected to exist in the laboratory experiments due to the external circuit that drives the plasma current. The boundary driving is found to systematically enhance the expansion velocity of the plasma arch. While perturbations at the arch footpoints also deform its legs and create characteristic elongated segments, a perturbation between the footpoints tends to push the entire structure upwards, retaining an ellipsoidal shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature and density evolution during decay in a 2.45 GHz hydrogen electron cyclotron resonance plasma: Off-resonant and resonant cases

Time resolved electron temperature and density measurements during the decay stage in a hydrogen electron cyclotron resonance (ECR) plasma are presented for a resonance and off-resonance magnetic field configurations. The measurements are conducted on a ECR plasma generator excited at 2.45 GHz denominated test-bench for ion-sources plasma studies at ESS Bilbao. The plasma parameters evolution is studied by Langmuir probe diagnostic with synchronized sample technique developed for repetitive pulsed plasmas with a temporal resolution of 200 ns in typical decay processes of about 40 μs. An afterglow transient is clearly observed in the reflected microwave power signal from the plasma. Simultaneously, the electron temperature evolution shows rebounding peaks that may be related to the interplay between density drop and microwave coupling with deep impact on the Electron Energy Distribution Function. The correlation of such structures with the plasma absorbed power and the coupling quality is also reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of series H{sup −} multicusp ion source at China Institute of Atomic Energy

The development of H{sup −} multicusp ion sources has been carried out at China Institute of Atomic Energy (CIAE) for more than ten years. The first H{sup −} ion source with 5.2 mA was made in 2002. After improving the configured magnetic field, a H{sup −} ion source of 10 mA was made in 2004, and the beam intensity of 15 mA was obtained in 2008 after further improvements of the filter field. The beam intensity of 18 mA was achieved in 2010 following the in-depth study and optimization on some essential operation conditions. Now a series of H{sup −} cusp sources with different sizes and beam intensity ranging from 3 mA to 18 mA have been successfully developed at CIAE. All the ion sources can fast finish the test on the test stand now, since all the connections are modularized and can fit all kinds of H{sup −} mulitcusp source of CIAE. The development status of the various H{sup −} multicusp ion sources at CIAE are presented in the paper.

43 PARTICLE ACCELERATORS↗

Differential pumping requirements for the light-ion helicon source and heating systems of Proto-MPEX

The physics of electron and ion heating of high-density deuterium helicon plasmas (>3 × 10 19 m –3 ) in the Proto-Material Plasma Exposure Experiment linear device are under investigation. Theoretical estimates indicate that for efficient heating, discharges with very low neutral gas content ( &laquo; 0.1 Pa) in the heating sections are required to minimize collisional losses and charge exchange interactions with neutrals. However, this requirement is typically not compatible with the neutral gas pressures (1–2 Pa) commonly used in high-density, light-ion helicon sources. To satisfy these competing requirements, differential pumping techniques are needed. Here, results are presented that demonstrate the production of high-density discharges (2–6 × 10 19 m –3 ) with very low neutral gas content (<0.01 Pa) and high degree of ionization (>75%) in the heating sections. Results indicate that the best fueling location is upstream of the plasma source. We elaborate on the key aspects that must be considered to produce these discharges: (1) fueling location, radio-frequency pulse length, and magnetic field configuration, (2) flow rate and timing of the gas injection, and (3) use of conductance-limiting elements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Achieving stationary high performance plasmas at Wendelstein 7-X

This work reports on recent results on the search for high performance plasma scenarios at the magnetically confined stellarator fusion device Wendelstein 7-X. In four new designed scenarios, the development from transient toward stationary plasmas of improved performance has been realized. In particular, a high performance duration of up to 5 s, an energy confinement time of 0.3 s, a diamagnetic energy of 1.1 MJ, a central ion temperature of 2.2 keV, and a fusion triple product of 3.4 x 10 19 m -3 ∙ keV ∙ s have been achieved, and previously observed limitations of the machine have been overcome, regarding both the performance and its duration. The two main experimental techniques for stationary high performance are neutral beam injection core fueling on the one hand and the use of a magnetic field configuration with internal islands on the other hand. Two of the developed scenarios are expected to be extendable straightforward toward a duration of several tens of seconds, making use of the long pulse operation capabilities of W7-X.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ELECTRON ACCELERATION BY MULTI-ISLAND COALESCENCE

Energetic electrons of up to tens of MeV are created during explosive phenomena in the solar corona. While many theoretical models consider magnetic reconnection as a possible way of generating energetic electrons, the precise roles of magnetic reconnection during acceleration and heating of electrons still remain unclear. Here, we show from two-dimensional particle-in-cell simulations that coalescence of magnetic islands that naturally form as a consequence of tearing mode instability and associated magnetic reconnection leads to efficient energization of electrons. The key process is the secondary magnetic reconnection at the merging points, or the 'anti-reconnection', which is, in a sense, driven by the converging outflows from the initial magnetic reconnection regions. By following the trajectories of the most energetic electrons, we found a variety of different acceleration mechanisms but the energization at the anti-reconnection is found to be the most important process. We discuss possible applications to the energetic electrons observed in the solar flares. We anticipate our results to be a starting point for more sophisticated models of particle acceleration during the explosive energy release phenomena.

79 ASTRONOMY AND ASTROPHYSICS↗

LBT/LUCIFER OBSERVATIONS OF THE z {approx} 2 LENSED GALAXY J0900+2234

We present rest-frame optical images and spectra of the gravitationally lensed, star-forming galaxy J0900+2234 (z = 2.03). The observations were performed with the newly commissioned LUCIFER1 near-infrared (NIR) instrument mounted on the Large Binocular Telescope. We fitted lens models to the rest-frame optical images and found that the galaxy has an intrinsic effective radius of 7.4 {+-} 0.8 kpc with a lens magnification factor of about 5 for the A and B components. We also discovered a new arc belonging to another lensed high-z source galaxy, which makes this lens system a potential double Einstein ring system. Using the high signal-to-noise ratio rest-frame spectra covered by the H + K band, we detected H{beta}, [O III], H{alpha}, [N II], and [S II] emission lines. Detailed physical properties of this high-z galaxy were derived. The extinction toward the ionized H II regions (E{sub g} (B - V)) was computed from the flux ratio of H{alpha} and H{beta} and appears to be much higher than that toward the stellar continuum (E{sub s} (B - V)), derived from the optical and NIR broadband photometry fitting. The metallicity was estimated using N2 and O3N2 indices. It is in the range of 1/5 - 1/3 solar abundance, which is much lower than for typical z {approx} 2 star-forming galaxies. From the flux ratio of [S II]{lambda}6717 and [S II]{lambda}6732, we found that the electron number density of the H II regions in the high-z galaxy was {approx_equal}1000 cm{sup -3}, consistent with other z {approx} 2 galaxies but much higher than that in local H II regions. The star formation rate was estimated via the H{alpha} luminosity, after correction for the lens magnification, to be about 365 {+-} 69 M{sub sun} yr{sup -1}. Combining the FWHM of H{alpha} emission lines and the half-light radius, we found that the dynamical mass of the lensed galaxy is (5.8 {+-} 0.9) x 10{sup 10} M{sub sun}. The gas mass is (5.1 {+-} 1.1) x 10{sup 10} M{sub sun} from the H{alpha} flux surface density using global Kennicutt-Schmidt law, indicating a very high gas fraction of 0.79 {+-} 0.19 in J0900+2234.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTI-FLUID MODEL OF A STREAMER AT SOLAR MINIMUM AND COMPARISON WITH OBSERVATIONS

We present the results of a time-dependent 2.5-dimensional three-fluid magnetohydrodynamic model of the coronal streamer belt, which is compared with the slow solar wind plasma parameters obtained in the extended corona by the UV spectroscopic data from the Ultraviolet Coronagraph Spectrometer (UVCS) on board SOHO during the past minimum of solar activity (Carrington Rotation 1913). Our previous three-fluid streamer model has been improved by considering the solar magnetic field configuration relevant for solar minimum conditions, and preferential heating for O{sup 5+} ions. The model was run until a fully self-consistent streamer solution was obtained in the quasi-steady state. The plasma parameters from the multi-fluid model were used to compute the expected UV observables from H I Ly{alpha} 1216 A and O VI 1032 A spectral lines, and the results were compared in detail with the UVCS measurements. A good agreement between the model and the data was found. The results of the study provide insight into the acceleration and heating of the multi-ion slow solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

DIRECT EVIDENCE FOR A FAST CORONAL MASS EJECTION DRIVEN BY THE PRIOR FORMATION AND SUBSEQUENT DESTABILIZATION OF A MAGNETIC FLUX ROPE

Magnetic flux ropes play a central role in the physics of coronal mass ejections (CMEs). Although a flux-rope topology is inferred for the majority of coronagraphic observations of CMEs, a heated debate rages on whether the flux ropes pre-exist or whether they are formed on-the-fly during the eruption. Here, we present a detailed analysis of extreme-ultraviolet observations of the formation of a flux rope during a confined flare followed about 7 hr later by the ejection of the flux rope and an eruptive flare. The two flares occurred during 2012 July 18 and 19. The second event unleashed a fast (>1000 km s{sup -1}) CME. We present the first direct evidence of a fast CME driven by the prior formation and destabilization of a coronal magnetic flux rope formed during the confined flare on July 18.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIAL TRANSPORT OF LARGE-SCALE MAGNETIC FIELDS IN ACCRETION DISKS. II. RELAXATION TO STEADY STATES

We study the time evolution of a large-scale magnetic flux threading an accretion disk. The induction equation of the mean poloidal field is solved under the standard viscous disk model. Magnetic flux evolution is controlled by two timescales: one is the timescale of the inward advection of the magnetic flux, τ{sub adv}. This is induced by the dragging of the flux by the accreting gas. The other is the outward diffusion timescale of the magnetic flux τ{sub dif}. We consider diffusion due to the Ohmic resistivity. These timescales can be significantly different from the disk viscous timescale τ{sub disk}. The behaviors of the magnetic flux evolution are quite different depending on the magnitude relationship of the timescales τ{sub adv}, τ{sub dif}, and τ{sub disk}. The most interesting phenomena occur when τ{sub adv} << τ{sub dif}, τ{sub disk}. In such a case, the magnetic flux distribution approaches a quasi-steady profile much faster than the viscous evolution of the gas disk, and the magnetic flux has also been tightly bundled to the inner part of the disk. In the inner part, although the poloidal magnetic field becomes much stronger than the interstellar magnetic field, the field strength is limited to the maximum value that is analytically given by our previous work. We also find a condition for the initial large magnetic flux, which is a fossil of the magnetic field dragging during the early phase of star formation that survives for a duration in which significant gas disk evolution proceeds.

79 ASTRONOMY AND ASTROPHYSICS↗

Heat pulse propagation in chaotic three-dimensional magnetic fields

Heat pulse propagation in three-dimensional chaotic magnetic fields is studied by numerically solving the parallel heat transport equation using a Lagrangian Green's function (LG) method. The main two problems addressed are: the dependence of the radial transport of heat pulses on the level of magnetic field stochasticity (controlled by the amplitude of the magnetic field perturbation, ε), and the role of reversed shear magnetic field configurations on heat pulse propagation. The role of separatrix reconnection of resonant modes in the shear reversal region, and the role of shearless Cantori in the observed phenomena are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Harnessing mass differential confinement effects in magnetized rotating plasmas to address new separation needs

The ability to separate large volumes of mixed species based on atomic mass appears desirable for a variety of emerging applications with high societal impact. One possibility to meet this objective consists in leveraging mass differential effects in rotating plasmas. Beyond conventional centrifugation, rotating plasmas offer in principle additional ways to separate elements based on mass. Single ion orbits show that ion radial mass separation in a uniform magnetized plasma column can be achieved by applying a tailored electric potential profile across the column, or by driving a rotating magnetic field within the column. Furthermore, magnetic pressure and centrifugal effects can be combined in a non-uniform geometry to separate ions based on mass along the field lines. In conclusion, practical application of these separation schemes hinges on the ability to produce the desirable electric and magnetic field configuration within the plasma column.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗