Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEMORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Spin–Phonon Coupling in Ferromagnetic Monolayer Chromium Tribromide

Novel 2D magnets exhibit intrinsic electrically tunable magnetism down to the monolayer limit, which has significant value for nonvolatile memory and emerging computing device applications. In these compounds, spin–phonon coupling (SPC) typically plays a crucial role in magnetic fluctuations, magnon dissipation, and ultimately establishing long-range ferromagnetic order. However, a systematic understanding of SPC in 2D magnets that combines theory and experiment is still lacking. Here in this work, monolayer chromium tribromide is studied to investigate SPC in 2D magnets via Raman spectroscopy and first principle calculations. The experimental Curie temperature and phonon shifts are found to be in good agreement with the numerical simulations. Specifically, it is demonstrated how magnetic exchange interactions affect phonon vibrations, which helps establish design fundamentals for 2D magnetic materials and other related devices.

36 MATERIALS SCIENCE↗

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next-generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators that can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling, which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single-crystal (Mg 0.2 Ni 0.2 Fe 0.2 Co 0.2 Cu 0.2 )Fe 2 O 4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Furthermore, local and global magnetic measurements further demonstrate how strain can be used to manipulate the magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next-generation magnetic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MEMORY EFFECTS IN TURBULENT TRANSPORT

In the mean-field theory of magnetic fields, turbulent transport, i.e., the turbulent electromotive force is described by a combination of the alpha effect and turbulent magnetic diffusion, which are usually assumed to be proportional, respectively, to the mean field and its spatial derivatives. For a passive scalar, there is just turbulent diffusion, where the mean flux of concentration depends on the gradient of the mean concentration. However, these proportionalities are approximations that are valid only if the mean field or the mean concentration vary slowly in time. Examples are presented where turbulent transport possesses memory, i.e., where it depends crucially on the past history of the mean field. Such effects are captured by replacing turbulent transport coefficients with time integral kernels, resulting in transport coefficients that depend effectively on the frequency or the growth rate of the mean field itself. In this paper, we perform numerical experiments to find the characteristic timescale (or memory length) of this effect as well as simple analytical models of the integral kernels in the case of passive scalar concentrations and kinematic dynamos. The integral kernels can then be used to find self-consistent growth or decay rates of the mean fields. In mean-field dynamos, the growth rates and cycle periods based on steady state values of alpha effect, and turbulent diffusivity can be quite different from the actual values.

30 DIRECT ENERGY CONVERSION↗

Martensitic transformation and phase stability of In-doped Ni-Mn-Sn shape memory alloys from first-principles calculations

The effect of the alloying element Indium (In) on the martensitic transition, magnetic properties, and phase stabilities of Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} shape memory alloys has been investigated using the first-principles pseudopotential plane-wave method based on density functional theory. The energy difference between the austenitic and martensitic phases was found to increase with increasing In content, which implies an enhancement of the martensitic phase transition temperature (T{sub M}). Moreover, the formation energy results indicate that In-doping increases the relative stability of Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} both in austenite and martensite. This results from a reduction in density of states near the Fermi level regions caused by Ni-3d–In-5p hybridization when Sn is replaced by In. The equilibrium equation of state results show that the alloys Ni{sub 8}Mn{sub 6}Sn{sub 2−x}In{sub x} exhibit an energetically degenerated effect for an In content of x = ∼1.5. This implies the coexistence of antiparallel and parallel configurations in the austenite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic Liquid Gating Control of Spin Reorientation Transition and Switching of Perpendicular Magnetic Anisotropy

Electric field (E–field) modulation of perpendicular magnetic anisotropy (PMA) switching, in an energy–efficient manner, is of great potential to realize magnetoelectric (ME) memories and other ME devices. Voltage control of the spin–reorientation transition (SRT) that allows the magnetic moment rotating between the out–of–plane and the in–plane direction is thereby crucial. In this work, a remarkable magnetic anisotropy field change up to 1572 Oe is achieved under a small operation voltage of 4 V through ionic liquid (IL) gating control of SRT in Au/[DEME]+[TFSI] – /Pt/(Co/Pt) 2 /Ta capacitor heterostructures at room temperature, corresponding to a large ME coefficient of 378 Oe V –1 . As revealed by both ferromagnetic resonance measurements and magnetic domain evolution observation, the magnetization can be switched stably and reversibly between the out–of–plane and in–plane directions via IL gating. The key mechanism, revealed by the first–principles calculation, is that the IL gating process influences the interfacial spin–orbital coupling as well as net Rashba magnetic field between the Co and Pt layers, resulting in the modulation of the SRT and in–plane/out–of–plane magnetization switching. In conclusion, this work demonstrates a unique IL–gated PMA with large ME tunability and paves a way toward IL gating spintronic/electronic devices such as voltage tunable PMA memories.

36 MATERIALS SCIENCE↗

Tunable magnetism in metal adsorbed fluorinated nanoporous graphene

Developing nanostructures with tunable magnetic states is crucial for designing novel data storage and quantum information devices. Using density functional theory, we study the thermodynamic stability and magnetic properties of tungsten adsorbed tri-vacancy fluorinated (TVF) graphene. We demonstrate a strong structure-property relationship and its response to external stimuli via defect engineering in graphene-based materials. Complex interplay between defect states and the chemisorbed atom results in a large magnetic moment of 7 μ B along with high in-plane magneto-crystalline anisotropy energy (MAE) of 17 meV. Under the influence of electric field, spin crossover effect accompanied by a change in the MAE is observed. The ascribed change in spin-configuration is caused by the modification of exchange coupling between defect states and a change in the occupation of d-orbitals of the metal complex. In conclusion, our predictions open a promising way towards controlling the magnetic properties in graphene based spintronic and non-volatile memory devices.

36 MATERIALS SCIENCE↗

Computer memory access technique

Computer memory access commutator and steering gate configuration produces bipolar current pulses while still employing only the diodes and magnetic cores of the classic commutator, thereby appreciably reducing the complexity of the memory assembly.

Zottarelli, L. J.↗

Phenomenological Modeling of Magnetocaloric Effect for Ni{sub 58}Fe{sub 26}Ga{sub 28} Alloy

The magnetocaloric effect (MCE) of shape memory Ni{sub 58}Fe{sub 26}Ga{sub 28} has been investigated. A phenomenological model is used for simulation of magnetization dependence on temperature variation to investigate magnetocaloric properties such as magnetic entropy change and heat capacity change. The results indicate the potential of Ni{sub 58}Fe{sub 26}Ga{sub 28} alloy to achieve the MCE at temperatures near Curie temperature. This alloy presents a good-looking approach for cooling applications in its prospective candidate for a cooling system in a wide temperature interval including room temperature. The results also confirmed that the phenomenological model is useful for prediction of the MCE for magnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conducting Molecular Nanomagnet of Dy III with Partially Charged TCNQ Radicals

Bifunctional electrically conducting single-molecule magnets are highly promising platforms for non-volatile memory devices and quantum computing applications. The development of these molecular materials, however, has largely been hindered by the lack of straightforward synthetic methods. Herein a facile and modular approach is demonstrated for the realization of bifunctional materials that does not require electrochemical or chemical oxidation to obtain partially charged organic radicals. Magnetic and electrical conductivity studies reveal that the Dy III compound exhibits slow relaxation of the magnetization between 5.0–8.0 K and semiconducting behavior over the range 180–350 K. DC magnetic fields have been found to suppress the quantum tunneling of the magnetization and affect the spin-canted antiferromagnetic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partially Grooved Domain Stabilization Structures for Vertical Bloch Line Memory

Bias field stability ranges were measured and numerically simulated for magnetic domains ingarnets stabilized by partially grooved rectangular and ring grooves. Simulation results agreefavorably with experimental results when finite slope effects of the groove walls are included. Asbias fields increase, rectangular and ring domains both destabilize through stripe head recession. Asbias fields decrease, destabilization in rectangular domains occurs by runout, while destabilization inring domains occurs by midstripe domain buckling. While ring domains are stable at lower biasfields than rectangular domains, bias field stability ranges are approximately equal. Hence, for thesame partial grooving depth, rectangular domains are preferred because they offer higher storagedensity potential in Vertical Block Line (VBL) storage arrays as long as bit propagation margins atstripe ends are sufficient.

Katti, R. R.↗

Influence of volume magnetostriction on the thermodynamic properties of Ni-Mn-Ga shape memory alloys

In the present article, the thermodynamic properties of Ni-Mn-Ga ferromagnetic shape memory alloys exhibiting the martensitic transformations (MTs) above and below Curie temperature are compared. It is shown that when MT goes below Curie temperature, the elastic and thermal properties of alloy noticeably depend on magnetization value due to spontaneous volume magnetostriction. However, the separation of magnetic parts from the basic characteristics of MT is a difficult task, because the volume magnetostriction does not qualitatively change the transformational behaviour of alloy. This problem is solved for several Ni-Mn-Ga alloys by means of the quantitative theoretical analysis of experimental data obtained in the course of stress-strain tests. For each alloy, the entropy change and the transformation heat evolved in the course of MT are evaluated, first, from the results of stress-strain tests and, second, from differential scanning calorimetry data. For all alloys, a quantitative agreement between the values obtained in two different ways is observed. It is shown that the magnetic part of transformation heat exceeds the non-magnetic one for the Ni-Mn-Ga alloys undergoing MTs in ferromagnetic state, while the elevated values of transformation heat measured for the alloys undergoing MTs in paramagnetic state are caused by large MT strains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Harnessing ferro-valleytricity in pentalayer rhombohedral graphene for memory and compute

Two-dimensional materials with multiple degrees of freedom, including spin, valleys, and orbitals, open up an exciting avenue for engineering multifunctional devices. Beyond spintronics, these degrees of freedom can lead to novel quantum effects such as valley-dependent Hall effects and orbital magnetism, which could revolutionize next-generation electronics. However, achieving independent control over valley polarization and orbital magnetism has been a challenge due to the need for large electric fields. A recent breakthrough involving pentalayer rhombohedral graphene has demonstrated the ability to individually manipulate anomalous Hall signals and orbital magnetic hysteresis, forming what is known as a valley-magnetic quartet. Here, we leverage the electrically tunable ferro-valleytricity of pentalayer rhombohedral graphene to develop nonvolatile memory and in-memory computation applications. We propose an architecture for a dense, scalable, and selector-less nonvolatile memory array that harnesses the electrically tunable ferro-valleytricity. In our designed array architecture, nondestructive read and write operations are conducted by sensing the valley state through two different pairs of terminals, allowing for independent optimization of read/write peripheral circuits. The power consumption of our PRG-based array is remarkably low, with only ∼6 nW required per write operation and ∼2.3 nW per read operation per cell. This consumption is orders of magnitude lower than that of the majority of state-of-the-art cryogenic memories. Additionally, we engineer in-memory computation by implementing majority logic operations within our proposed nonvolatile memory array without modifying the peripheral circuitry. In conclusion, our framework presents a promising pathway toward achieving ultra-dense cryogenic memory and in-memory computation capabilities.

2D materials↗

Space-Charge-Limited van der Waals Spin Transistor

Integrating semiconducting and magnetic materials could combine transistorlike operation with nonvolatility and enable architectures such as logic in memory. Here, in this work, we employ correlated electrical transport and scanning nitrogen-vacancy center magnetic imaging to elucidate a spin transistor concept that amalgamates vertical and lateral hopping transport inside a 2D antiferromagnetic semiconductor, mechanistically distinct from vertical tunneling devices. Our device, based on a monolayer-bilayer junction in CrSBr, displays giant, gate-tunable magnetoresistance driven by the dual action of electrostatic doping on space-charge-limited lateral conduction and interlayer exchange coupling. Moreover, we visualize a field-trainable, layer-sharing effect that selects between coherent or domain-wall reversal at the spin-flip transition, enabling multilevel, memristive conductance states. Our layer-dependent space charge mechanism for convergent electrical and magnetic control opens opportunities to address limitations in contemporary computing.

2-dimensional systems↗

Strong Relativistic Effects in Lanthanide-Based Single-Molecule Magnets

Lanthanide-based single-molecule magnets (SMMs) are promising building blocks for quantum memory and spintronic devices. Designing lanthanide-based SMMs with long spin relaxation time requires a detailed understanding of their electronic structure, including the crucial role of the spin-orbit coupling (SOC). While traditional calculations of SOC using the perturbation theory applied to a solution of the non-relativistic Schrödinger equation are valid for light atoms, this approach is questionable for systems containing heavy elements such as lanthanides. We investigate the accuracy of the perturbation estimates of SOC by variationally solving the Dirac equation for the [DyO] + molecule, a prototype of a lanthanide-based SMM. We show that the energy splittings between the M J states involved in spin relaxation depend on the interplay between strong SOC and dynamic electron correlations. Here, we demonstrate that this interplay affects the resonances between the spin and vibrational transitions, and, therefore, the spin relaxation time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using Long-Short Term Memory Models to Predict Solar Active Regions Emergence

We train Long Short-Term Memory (LSTM) models that predict the formation of active regions (ARs), the main source of eruptive solar activity. Using the Doppler shift velocity, the continuum intensity and the magnetic field full-disk maps from SDO/HMI we have created time-series datasets of acoustic power and magnetic flux which are used to train Long Short-Term Memory (LSTM) models on predicting decreases in continuum intensity 12 hours in advance. Testing of the models' performance was done on data from 5 ARs, unseen from the model during training. The model predicted the emergence of AR11726, AR13165 and AR13179, 10, 29 and 5 hours in advance, and variations of this model achieved average RMSE values of 0.11 for both active and quiet parts of the solar disc, showing the ability of the model to capture acoustic power anomalies and predict continuum intensity variations. This work sets the foundations for the very first ML-aided prediction of solar ARs.

SMD↗

An analytic formulation for heating source memory in the thermospheric composition

Numerical calculations from a spectral circulation model are utilized to construct an analytic Green's function formulation describing the meridional, time-dependent thermospheric composition and temperature response during magnetic storms. The purpose is to develop a formulation that embodies source memory while being sufficiently simple to serve as a heuristic guide for empirical modeling. By passing from the discrete Fourier series representation, utilized for the numerical circulation model, to a continuous Fourier integral representation, explicit waves are obtained for the thermospheric response times. The response times are altitude and species dependent and can exceed two days below 200 km. Thus, for certain storm scenarios, pronounced source memory signatures for the composition and temperature are predicted. Response times obtained from the formulation are shown to give a response consistent with previously published neutral composition data from AE-C for the February 1974 storm when an ap dependent heat source is employed.

Porter, H. S.↗

Testing the possibility of magnetic domain imaging based on circular & linear dichroism using photoemission electron microscopy

In recent years, an increasing number of memory and spintronic devices have been developed exploiting the combination of ferromagnetic (FM) and anti-ferromagnetic (aFM) materials. Consequently, magnetic imaging based on continuous-wave (CW) ultraviolet (UV) (λ = 266nm and longer wavelength) photoemission electron microscopy (PEEM) is gaining considerable attention due to the possibility of determining magnetizations for FM and aFM materials with 10 nm lateral resolution at video rate image acquisition. This PEEM-based approach exploits the polarization-dependent photoemission yield, which is subject to the polarization vector and the FM or aFM magnetization direction. Because of this unique attribute, magnetic imaging using PEEM when coupled to a laser with multiple illumination geometries allows for characterizing in-plane and out-of-plane magnetizations. This concept, however, has not been tested using a deep-UV laser (λ = 213nm), which has a much broader application space than the longer wavelength excitation used in previous reports. The purpose of this project in FY17 was to show the proof-of-concept of magnetic circular dichroism (MCD)-PEEM imaging using a λ = 210nm pulsed laser. Our results demonstrated the feasibility of in-plane and out-of-plane magnetic imaging with the limitations in the lateral resolution, data acquisition time, and signal-to-noise ratio anticipated for using a pulsed laser of moderate power. The project goal for FY18 is to construct the automated polarization-controlled data acquisition, and to establish the new lab facility in anticipation of acquiring a state-of-the-art high-power 213nm CW laser, planned to be installed in FY19. We successfully demonstrate the former by measuring dielectric stacks with polarization-dependent photoemission yield. Extrapolating from our result, we conclude that the capability of PEEM-based magnetic imaging using a CW deep UV laser could be a potential game-changer for scientific investigations and technological developments of magnetic materials and spintronic devices. In addition, polarization controlled PEEM imaging shows the potential for ellipsometry imaging of embedded nanomaterials exploiting their subtle differences in optical constants with respect to their surrounding dielectrics.

36 MATERIALS SCIENCE↗

Magnetic properties of Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) Heusler alloys

The low electron concentration region (e/a < 7.75) of the magnetic phase diagram of the off-stoichiometric Ni–Mn–Sn Heusler alloys was investigated in detail by DSC and magnetization measurements of the Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) alloys. The alloys show a stable austenitic phase without any martensitic transformation down to 5 K even after heat treatment. The Curie temperature exhibits a broad maximum over a large composition range. The evolution of the magnetic moment with the electron concentration fits the data of previous studies and confirms the peak-like dependence in the extended range of e/a values predicted by ab initio calculations. Finally, the explored part of the moment versus e/a curve can be explained in terms of a localized magnetic moment model and full atomic order in the alloys.

36 MATERIALS SCIENCE↗