Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MOMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

First-Principle Study of the Electronic and Magnetic Properties of Nd{sub 1−x}La{sub x}FeSi Alloys (x = 0, 0.25, 0.50, 0.75, and 1)

The structural, electronic, and magnetic properties of Nd{sub 1−x}La{sub x}FeSi (x = 0, 0.25, 0.50, 0.75, and 1) alloys are investigated based on the first-principle density functional theory by using the full-potential linear muffin-tin orbital (FP-LMTO) method. The exchange-correlation potential is treated with local density approximation (LDA). In addition, to treat localization of 4f-electrons properly, the LDA + U approach (where U is the Hubbard correlation term) is also employed. The calculated structural, electronic, and magnetic properties of these alloys within LDA and LDA + U approaches are compared. The calculated lattice constants of these alloys as a function of x within the LDA + U approach are in the best agreement with linear Vegard’s rule. Most importantly, we focus on the magnetic properties of these alloys and find that the magnetic interaction between Nd atoms is the Rudermen-Kittel-Kasuya-Yosida (RKKY) interaction type. Iron does not carry magnetic moment in these alloys and has just an induced small magnetic moment from Nd atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study for ferromagnetism of Cu-doped ZnO with carrier doping

We studied the effects on the ferromagnetism of carrier doping in Zn{sub 1-x}Cu{sub x}O with x=0.0277-0.0833 by using the first-principles calculations. The total magnetic moment of Cu is about 1, 2, and 3 {mu}{sub B}/cell at the concentration of 2.77%, 5.55%, and 8.33%, respectively. For Zn{sub 1-x}Cu{sub x}O{sub 1-y}N{sub y}, we obtained the ferromagnetic and half-metallic ground state. The Cu magnetic moment in low Cu concentration is increased by the N-doping. However, for the F-doping it decreases. The ferromagnetism in Cu-doped ZnO is controllable by changing the carrier density. The N 2p states hybridize well with Cu 3d states instead of the O 2p states. Due to the hybridization between N 2p and Cu 3d states, the holes are itinerant with keeping its 3d states. For (Cu,N)-codoped ZnO, it is recognized that the width of 3d states is larger than that of (Cu,F)-codoped ZnO. - Graphical abstract: Considered clean wurtzite ZnO structure, the Cu magnetic moments for Zn{sub 1-x}Cu{sub x}O{sub 1-y}N{sub y} or Zn{sub 1-x}Cu{sub x}O{sub 1-y}F{sub y} of the ferromagnetic state (left), and the charge density difference of Zn{sub 1-x}Cu{sub x}O (x=0.0277) (right). Highlights: Black-Right-Pointing-Pointer The ferromagnetism of Cu-doped ZnO is controllable by N or F carrier density. Black-Right-Pointing-Pointer The Cu magnetic moment in low Cu concentration is increased by hole doping. Black-Right-Pointing-Pointer The N 2p states hybridize well with the Cu 3d states instead of the O 2p states. Black-Right-Pointing-Pointer For (Cu,F)-codoped ZnO, the Cu 3d band is narrower than that for (Cu,N)-codoped ZnO.

36 MATERIALS SCIENCE↗

Ab Initio Study of Structural, Electronic, and Magnetic Properties of A{sub 1−x}{sup III}Mn{sub x}B{sup VI}: In{sub 1−x}Mn{sub x}S-Diluted Magnetic Semiconductor

First-principles density functional calculations on the new class of diluted magnetic semiconductor A{sub 1−x}{sup III}Mn{sub x}B{sup VI} In{sub 1−x}Mn{sub x}S for x = 0.25 and 0.5 are investigated to study the structural, electronic, and magnetic properties, employing the full-potential linearized augmented plane wave method. Electronic band structures and density of states revealed a half-metallic character of In{sub 1−x}Mn{sub x}S and show the stability of anti-ferromagnetic states as compared with ferromagnetic states. The calculated exchange constants J{sub dd} are in good agreement with experimental and theoretical results on magnetic properties of single crystalline A{sub 1−x}{sup III}Mn{sub x}B{sup VI} in the anti-ferromagnetic case. Our predicated calculations on the s,p-d exchange constants N{sub 0}α and N{sub 0}β show that they are lower than in A{sub 1−x}{sup II}Mn{sub x}B{sup VI} DMS. The local environment is found tetrahedral as in the II–VI DMS and other (III,Mn) VI compounds. The total magnetic moment for In{sub 1−x}Mn{sub x}S for different concentrations is in accordance with the exact value 5 μ{sub B} and comes mainly from impurity Mn. The local magnetic moments of Mn ions are reduced from their free space charges values due to the p-d hybridization which produces small magnetic moments on the nonmagnetic In and S sites. The Curie temperature of In{sub 1−x}Mn{sub x}S is calculated within the mean field approximation and compared with other DMS systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structure and magnetic properties of Li{sub 2}InMo{sub 3}O{sub 8}: A novel reduced molybdenum oxide containing magnetic Mo{sub 3} clusters

Powder samples and single crystals of Li{sub 2}InMo{sub 3}O{sub 8} were obtained by solid state reaction. The structure was determined by single-crystal X-ray diffraction (771 independent reflections for 33 refinable, R1=0.0158 and wR2=0.0354). Li{sub 2}InMo{sub 3}O{sub 8} is isomorphous with Li{sub 2}SnMo{sub 3}O{sub 8} and crystallizes in the hexagonal space group P6{sub 3}mc with unit-cell parameters a=5.7931(2) Å, c=10.4681(4) Å and Z=2. The crystal structure consists of distorted hexagonal-close-packed oxygen layers with stacking sequence abac along [0 0 1] and that are held together by alternating lithium–indium and molybdenum layers. The Li{sup +} and In{sup 3+} ions occupy, respectively, tetrahedral and octahedral sites in the ratio 2:1. The Mo atoms occupy octahedral sites and form strongly bonded triangular clusters involving three MoO{sub 6} octahedra that are each shared along two edges, constituting a Mo{sub 3}O{sub 13} unit. The variations of the Mo–Mo and Mo–O bond lengths according to the number of electrons per Mo{sub 3} cluster are discussed. The trivalent oxidation state of the indium leads to one unpaired electron per Mo{sub 3} and thus gives rise to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. The magnetic susceptibility vs. temperature curve also shows a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters. - Graphical abstract: We present here the synthesis, the crystal structure, and the magnetic properties of the new quaternary compound Li{sub 2}InMo{sub 3}O{sub 8} containing magnetic Mo{sub 3}O{sub 13} units with one unpaired electron. - Highlights: • The new quaternary reduced molybdenum oxide containing Mo{sub 3} clusters, Li{sub 2}InMo{sub 3}O{sub 8}, was synthesized by solid state reaction. • Single-crystal X-ray study. • One unpaired electron per Mo{sub 3} cluster leading to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. • Magnetic susceptibility measurements show a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonperturbative QCD corrections to electroweak observables

Nonperturbative QCD corrections are important to many low-energy electroweak observables, for example the muon magnetic moment. However, hadronic corrections also play a significant role at much higher energies due to their impact on the running of standard model parameters, such as the electromagnetic coupling. Currently, these hadronic contributions are accounted for by a combination of experimental measurements and phenomenological modeling but ideally should be calculated from first principles. Recent developments indicate that many of the most important hadronic corrections may be feasibly calculated using lattice QCD methods. To illustrate this, we will examine the lattice computation of the leading-order QCD corrections to the muon magnetic moment, paying particular attention to a recently developed method but also reviewing the results from other calculations. We will then continue with several examples that demonstrate the potential impact of the new approach: the leading-order corrections to the electron and tau magnetic moments, the running of the electromagnetic coupling, and a class of the next-to-leading-order corrections for the muon magnetic moment. Along the way, we will mention applications to the Adler function, the determination of the strong coupling constant and QCD corrections to muonic-hydrogen.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structure and magnetic properties of Li,Cr-containing molybdates Li{sub 3}Cr(MoO{sub 4}){sub 3}, LiCr(MoO{sub 4}){sub 2} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3}

Single crystals of LiCr(MoO{sub 4}){sub 2}, Li{sub 3}Cr(MoO{sub 4}){sub 3} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} were grown by a flux method during the phase study of the Li{sub 2}MoO{sub 4}-Cr{sub 2}(MoO{sub 4}){sub 3} system at 1023 K. LiCr(MoO{sub 4}){sub 2} and Li{sub 3}Cr(MoO{sub 4}){sub 3} single phases were synthesized by solid-state reactions. Li{sub 3}Cr(MoO{sub 4}){sub 3} adopts the same structure type as Li{sub 3}In(MoO{sub 4}){sub 3} despite the difference in ionic radii of Cr{sup 3+} and In{sup 3+} for octahedral coordination. Li{sub 3}Cr(MoO{sub 4}){sub 3} is paramagnetic down to 7 K and shows a weak ferromagnetic component below this temperature. LiCr(MoO{sub 4}){sub 2} is isostructural with LiAl(MoO{sub 4}){sub 2} and orders antiferromagnetically below 20 K. The magnetic structure of LiCr(MoO{sub 4}){sub 2} was determined from low-temperature neutron diffraction and is based on the propagation vektor k{sup -}>=(1/2 ,1/2 ,0). The ordered magnetic moments were refined to 2.3(1) mu{sub B} per Cr-ion with an easy axis close to the [1 1 1-bar] direction. A magnetic moment of 4.37(3) mu{sub B} per Cr-ion was calculated from the Curie constant for the paramagnetic region. The crystal structures of the hitherto unknown Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} and LiCr(MoO{sub 4}){sub 2} are compared and reveal a high degree of similarity: In both structures MoO{sub 4}-tetrahedra are isolated from each other and connected with CrO{sub 6} and LiO{sub 5} via corners. In both modifications there are Cr{sub 2}O{sub 10} fragments of edge-sharing CrO{sub 6}-octahedra. - Graphical abstract: Magnetic structure of LiCr(MoO{sub 4}){sub 2}. The orientation of the magnetic moments of Cr{sup 3+} are shown by arrows.

36 MATERIALS SCIENCE↗

The First-Principle Study of the Electronic Structure, Ferromagnetic and Thermoelectric Properties of Spinel Alloy FeAl{sub 2}O{sub 4} Using mBJ Functional Approach

In this research work, the modified Becke and Johnson potential has been used to realize the actual electronic states and band gap properties of FeAl{sub 2}O{sub 4}. Ferromagnetism is illustrated in terms of John-Teller energy and exchange energies involved in the system due to electron spin. Moreover, the exchange constants also support the ferromagnetism in the studied compound. The reduction of the magnetic moment of Fe from its free space value and the shifting of the magnetic moment to nonmagnetic sites are the consequence of strong magnetization. In the end, the electrical conductivity and Seebeck coefficient incorporated to give a high value of the power factor and thermal efficiency for energy renewable devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Domain walls riding the wave.

Recent years have witnessed a rapid proliferation of electronic gadgets around the world. These devices are used for both communication and entertainment, and it is a fact that they account for a growing portion of household energy consumption and overall world consumption of electricity. Increasing the energy efficiency of these devices could have a far greater and immediate impact than a gradual switch to renewable energy sources. The advances in the area of spintronics are therefore very important, as gadgets are mostly comprised of memory and logic elements. Recent developments in controlled manipulation of magnetic domains in ferromagnet nanostructures have opened opportunities for novel device architectures. This new class of memories and logic gates could soon power millions of consumer electronic devices. The attractiveness of using domain-wall motion in electronics is due to its inherent reliability (no mechanical moving parts), scalability (3D scalable architectures such as in racetrack memory), and nonvolatility (retains information in the absence of power). The remaining obstacles in widespread use of 'racetrack-type' elements are the speed and the energy dissipation during the manipulation of domain walls. In their recent contribution to Physical Review Letters, Oleg Tretiakov, Yang Liu, and Artem Abanov from Texas A&M University in College Station, provide a theoretical description of domain-wall motion in nanoscale ferromagnets due to the spin-polarized currents. They find exact conditions for time-dependent resonant domain-wall movement, which could speed up the motion of domain walls while minimizing Ohmic losses. Movement of domain walls in ferromagnetic nanowires can be achieved by application of external magnetic fields or by passing a spin-polarized current through the nanowire itself. On the other hand, the readout of the domain state is done by measuring the resistance of the wire. Therefore, passing current through the ferromagnetic wire is the preferred method, as it combines manipulation and readout of the domain-wall state. The electrons that take part in the process of readout and manipulation of the domain-wall structure in the nanowire do so through the so-called spin transfer torque: When spin-polarized electrons in the ferromagnet nanowire pass through the domain wall they experience a nonuniform magnetization, and they try to align their spins with the local magnetic moments. The force that the electrons experience has a reaction force counterpart that 'pushes' the local magnetic moments, resulting in movement of the domain wall in the direction of the electron flow through the spin-transfer torque. The forces between the electrons and the local magnetic moments in the ferromagnet also create additional electrical resistance for the electrons passing through the domain wall. By measuring resistance across a segment of the nanowire, one determines if a domain wall is present; i.e., one can read the stored information. The interaction of the spin-polarized electrons with the domain wall in the ferromagnetic nanowire is not very efficient. Even for materials achieving high polarization of the free electrons, it is very difficult to move the magnetic domain wall. Several factors contribute to this problem, with imperfections of the ferromagnetic nanowire that cause domain-wall pinning being the dominant one. Permalloy nanowires, one of the best candidates for domain-wall-based memory and logic devices, require current densities of the order of 10{sup 8} A/cm{sup 2} in order to move a domain wall from a pinning well. Considering that this current has to pass through a relatively long wire, it is not very difficult to imagine that most of the energy will go to Joule heating. The efficiency of the process - the ratio of the energy converted to domain-wall motion to the total energy consumed - is comparable to that of an incandescent light bulb converting electricity to light. A step towards more efficient domain-wall-based memory devices is the advance of using alternating currents or current pulses to drive the domain walls. Injection of a spin-polarized current below the threshold value necessary to move the domain wall only causes oscillation of the domain wall inside the pinning potential. Exploiting the effect of resonance, one can apply a specific current waveform to drive the oscillations of the domain wall into resonance. Resonant amplification of domain-wall oscillations will free the domain wall from the pinning well at current levels that are a fraction of the dc threshold. Currents of an order of magnitude lower than before were shown to be sufficient to manipulate domain walls, thus reducing Joule heating 100 times. In their current paper, Tretiakov et al. provide a theoretical basis for the mechanism of resonant domain-wall motion in ferromagnetic nanowires.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Structural, magnetic, and electrochemical studies on lithium insertion materials LiNi{sub 1-x}Co{sub x}O{sub 2} with 0{<=}x{<=}0.25

The structural, magnetic, and electrochemical properties of the LiNi{sub 1-x}Co{sub x}O{sub 2} samples with x= 0, 0.05, 0.1, and 0.25 have been investigated by powder X-ray diffraction analyses, magnetic susceptibility ({chi}) measurements, and electrochemical charge and discharge test in non-aqueous lithium cell. According to the structural analyses using a Rietveld method, the occupancy of the Ni ions in the Li layer was estimated to be below 0.01 for all the samples and was eventually independent of x. The temperature (T) dependence of {chi}{sup -1} obtained with the magnetic field H=10 kOe indicated that all the samples are a Curie-Weiss paramagnet down to {approx}100K. At low T, all the samples entered into a spin-glass-like phase below T{sub f}. The magnitude of T{sub f} was found to decrease almost linearly with x, as in the case for the x dependences of the lattice parameters of a{sub h}- and c{sub h}-axes, Weiss temperature, and effective magnetic moment. It is, therefore, found that the change of the magnetic properties with x is simply explained by a dilution effect due to the increase of the quantity of Co{sup 3+} ions. On the other hand, the electrochemical measurements demonstrated that the irreversible capacity at the initial cycle is drastically decreased by the small amount of Co ions. Furthermore, the discharge capacity (Q{sub dis}) for the x=0.05 and 0.1 samples are larger than that for the x=0 sample; namely, Q{sub dis}=180 mAh g{sup -1} for x=0, Q{sub dis}=217 mAh g{sup -1} for x=0.05, and Q{sub dis}=206 mAh g{sup -1} for x=0.1. Comparing with the past results, the amount of Ni ions in the Li layer is found to play a significant role for determining the magnetic and electrochemical properties of LiNi{sub 1-x}Co{sub x}O{sub 2}. - Graphical Abstract: The inter-relationship between structural, magnetic, and electrochemical properties of the lithium insertion materials LiNi{sub 1-x}Co{sub x}O{sub 2} with 0{<=}x{<=}0.25 were investigated by X-ray diffraction measurements, magnetic susceptibility measurements, and electrochemical charge and discharge test in non-aqueous lithium cell. The magnitude of spin-glass-like transition temperature T{sub f} was found to decrease almost linearly with x, as well as the x dependences of effective magnetic moment, Weiss temperature, and lattice parameters.

36 MATERIALS SCIENCE↗

Magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5} brownmillerite by single-crystal Mössbauer spectroscopy

In order to determine orientation of the Fe{sup 3+} magnetic moments and electric field gradient (efg) axes in the brownmillerite-type strontium ferrite structure for both iron sublattices where the efg tensor is not axially symmetric, the Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5} were analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei. The magnetic moments of both octahedrally and tetrahedrally coordinated iron cations lie on the ac-plane of the orthorhombic unit cell and are parallel to the shortest c-axis, whilst the main efg axes are parallel to the longest crystallographic axis, b. This orientation is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}, in spite of the structural differences of strontium and calcium ferrite brownmillerites at low temperatures. - Graphical abstract: Mössbauer spectra of powdered and oriented single-crystal Sr{sub 2}Fe{sub 2}O{sub 5}, analyzed by solving the complete Hamiltonian for hyperfine interactions in the excited and ground states of the {sup 57}Fe nuclei, show that the magnetic moments of both octahedrally and tetrahedrally coordinated iron cations are parallel to the shortest c-axis of the orthorhombic brownmillerite unit cell . Display Omitted - Highlights: • Single-crystal Mössbauer spectroscopy is used to study magnetic structure of Sr{sub 2}Fe{sub 2}O{sub 5}. • Complete Hamiltonian for hyperfine interactions in excited and ground states was solved. • Fe{sup 3+} magnetic moments are parallel to the shortest crystallographic axis c. • The orientation of nuclear electric field gradient is similar to that in Ca{sub 2}Fe{sub 2}O{sub 5}.

36 MATERIALS SCIENCE↗

The extraordinary magnetoelectric response in silicene doped with Fe and Cr atoms

We have investigated the magnetic properties of the silicene doped with Fe and Cr metal atoms under external electric field by the first-principles calculations. We find that the doped systems show a variety of interesting magnetoelectric (ME) behaviors: (1) The magnetic moment of Fe doped silicene show a sharp jump at a threshold electric field, which indicates a good switching effect; (2) For the low concentrations of Fe or Cr doped silicene, there are two structures in which the changes of magnetism are significantly different under external electric field; (3) The magnetic moment of the doped systems has a nearly linear region with the electric field. We find that the changes of magnetic moment strongly depend on the direction of the electric field. In particular, one structure of Fe doped silicene shows an interesting ME response which can be considered as a magnetoelectric diode. With the electric field, the good controllability and sharp switching of the magnetism may offer a potential applications in the ME devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multipole moments of bumpy black holes

General relativity predicts the existence of black holes, compact objects whose spacetimes depend only on their mass, spin, and charge in vacuum (the 'no-hair' theorem). As various observations probe deeper into the strong fields of black hole candidates, it is becoming possible to test this prediction. Previous work suggested that such tests can be performed by measuring whether the multipolar structure of black hole candidates has the form that general relativity demands, and introduced a family of 'bumpy black hole' spacetimes to be used for making these measurements. These spacetimes have generalized multipoles, where the deviation from the Kerr metric depends on the spacetime's 'bumpiness'. In this paper, we show how to compute the Geroch-Hansen moments of a bumpy black hole, demonstrating that there is a clean mapping between the deviations used in the bumpy black hole formalism and the Geroch-Hansen moments. We also extend our previous results to define bumpy black holes whose current moments, analogous to magnetic moments of electrodynamics, deviate from the canonical Kerr value.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron diffraction study of quadruple perovskite SrCu{sub 3}Fe{sub 3}O{sub 12}

The magnetic structure of the quadruple perovskite SrCu{sub 3}Fe{sub 4}O{sub 12} is studied by means of neutron powder diffraction. The magnetic diffraction peaks are observed at low temperatures below 200 K. The Rietveld refinement result suggests an antiferromagnetic alignment of Fe spin magnetic moments for SrCu{sub 3}Fe{sub 4}O{sub 12} at low temperature. The refined magnetic moment at 4 K is ∼3.5 µ{sub B}, which is larger than that of that of CeCu{sub 3}Fe{sub 4}O{sub 12} (2.3 µ{sub B}). The increase in the magnetic moment is attributed to the larger Fe{sup 3+}:Fe{sup 5+} ratio for SrCu{sub 3}Fe{sub 4}O{sub 12} (∼4:1) compared with that of CeCu{sub 3}Fe{sub 4}O{sub 12} (∼3:1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy-loss magnetic chiral dichroism study of epitaxial MnAs film on GaAs(001)

The room-temperature ferromagnetic behavior of MnAs/GaAs(001) thin film has been locally explored by Transmission Electron Microscope (TEM). We first differentiated hexagonal α-MnAs and quasi-hexagonal β-MnAs which are very similar in atomic structure by electron diffraction. Local magnetic moment information of the identified α-MnAs was extracted from manganese-L{sub 2,3} edges using Energy-loss Magnetic Circular Dichroism technique and the ratio of orbital to spin magnetic moment was measured. In this experiment, atomic structure identification, chemical analysis, and magnetic moment measurement were simultaneously achieved at high spatial resolution in TEM, thus providing a potential method for in-situ study of local properties of multiphase magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Antiferromagnetic-configuration–dependent high harmonic generation in bilayer CrI 3

Abstract Bilayer CrI 3 accommodates both interlayer antiferromagnetic (AFM) and intralayer ferromagnetic couplings. Different alignments of intralayer ferromagnetic orders would lead to almost degenerate AFM configurations, which are insensitive to conventional techniques such as VSM and magneto-optical Kerr effect. Here, we demonstrate high harmonic generation (HHG) as a feasible means to detect the AFM configurations in bilayer CrI 3 with AB and stacking orders. When the intralayer magnetic moments are aligned along the z -axis, the AB stacked bilayer CrI 3 cancels the 3 n -order harmonics under the circularly polarized laser field. However, the stacked bilayer contains both even and odd harmonic. The 3 n -order harmonics are recovered as the intralayer magnetic moments of AB bilayer are in-plane aligned. For an in-plane linearly polarized laser field, the stacking bilayer with the magnetic moments along the x -axis contains both the even and odd harmonics in each component. However, when the magnetic moments are along the y -axis, the perpendicular component of HHG cancels out for the linearly polarized laser field along the x -axis. More interestingly, when the linearly polarized laser field is along the y -axis, the parallel component includes only the odd harmonics while the perpendicular component contains only the even harmonics. Our study provides HHG as a potential tool to detect AFM configurations.

Physics↗

Magnetic property and possible half-metal behavior in Co-doped graphene

The magnetic property and band structures of Co-monolayer doped graphene were examined on the basis of density-functional theory. The magnetic moment of the system is closely related to the interfacial spacing. Magnetic-nonmagnetic transition would be produced by decreasing the layer distance. Although the magnetic moment can also be reduced by increasing the lattice constant, the ground states are magnetic states under tension. Besides, the increase of lattice constant greatly enlarges the direct and indirect gaps of spin-down bands near the Fermi level. With a little increase of the Fermi level or the electron density, half-metal behavior would be expectable in the Co-doped graphene under tension.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principles Investigation of Ferromagnetic, Thermodynamic, Elastic, and Half-Metallic Behavior of ReCrTe and RuCrTe Half-Heusler Alloys

Calculations are realized within the full-potential linearized augmented plane wave (FP-LAPW) computational approach with the generalized gradient approximation (GGA) for the exchange-correlation potential. In this work, we present investigation of structural, electronic, ferromagnetic, elastic, and thermodynamic properties and half-metallic behavior of ReCrTe and RuCrTe compounds. Analysis of band structures and densities of states show the half-metallic ferromagnetic behavior of these compounds. The values of total magnetic moments µ{sub tot} are 1 µ{sub B} per unit cell for ReCrTe and 3 µ{sub B} per unit cell for RuCrTe. The contribution of Cr is the most important. The calculated values of a total magnetic moment nicely follow the rule µ{sub tot} = Z{sub t}− 18. The study of the impacts of strains on the magnetic moment reveals that the two compounds are stable ferromagnetic compounds. RuCrTe compound preserves the half-metallic behavior when the unit cell volume is changed in the range of [ − 4%, 4%], whereas, weak strain destroys the half metallic nature for ReCrTe compound. Using the quasi-harmonic Debye model, the effects of pressure P and temperature T on thermal expansion coefficient, Debye temperature, heat capacity and Grüneisen parameter for these two compounds are investigated for the first time. The study of the elastic constants shows that ReCrTe and RuCrTe are mechanically stable. RuCrTe is stiffer than ReCrTe compounds. The obtained values of Pugh’s ratio B/G and Cauchy pressure (C{sub 12} − C{sub 44}) reveal that ReCrTe and RuCrTe are brittle. The study of the electron charge density and Poisson’s ratio proves that the ionic character dominates the atomic bonding for the two compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗