Manned meteorology experiments.
Manned meteorology experiments aboard earth satellite including ozone concentration, noctilucent clouds, spectral airglow and albedo, precipitation map, etc
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Manned meteorology experiments aboard earth satellite including ozone concentration, noctilucent clouds, spectral airglow and albedo, precipitation map, etc
Rotating-cylinder measurements of the icing conditions encountered in flight during the winter of 1947-48 are presented. Liquid water content, drop size, and temperature data are shown to be consistent with previously measured conditions and with proposed maximum icing conditions in supercooled layer-type clouds. Cumulative frequency graphs of meteorological parameters indicate the frequency with which various icing conditions have been encountered in the Great Lakes area and surrounding states.
Health effects of air pollution, especially particulate matter (PM), have been widely investigated. However, most of the studies rely on few monitors located in urban areas for short-term assessments, or land use/dispersion modelling for long-term evaluations, again mostly in cities. Recently, the availability of finely resolved satellite data provides an opportunity to estimate daily concentrations of air pollutants over wide spatio-temporal domains. Italy lacks a robust and validated high resolution spatio-temporally resolved model of particulate matter. The complex topography and the air mixture from both natural and anthropogenic sources are great challenges difficult to be addressed. We combined finely resolved data on Aerosol Optical Depth (AOD) from the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm, ground-level PM10measurements, land-use variables and meteorological parameters into a four-stage mixed model framework to derive estimates of daily PM10concentrations at 1-km2 grid over Italy, for the years 2006-2012. We checked performance of our models by applying 10-fold cross-validation (CV) for each year. Our models displayed good fitting, with mean CV-R2=0.65 and little bias (average slope of predicted VS observed PM10=0.99). Out-of-sample predictions were more accurate in Northern Italy (Po valley) and large conurbations (e.g. Rome), for background monitoring stations, and in the winter season. Resulting concentration maps showed highest average PM10levels in specific areas (Po river valley, main industrial and metropolitan areas) with decreasing trends over time. Our daily predictions of PM10concentrations across the whole Italy will allow, for the first time, estimation of long-term and short-term effects of air pollution nationwide, even in areas lacking monitoring data. Copyright © 2016 Elsevier Ltd. All rights reserved.
The retrieval of optimal aerosol datasets by the synergistic use of hyperspectral ultraviolet(UV)–visible and broadband meteorological imager (MI) techniques was investigated. The Aura Ozone Monitoring Instrument (OMI) Level 1B (L1B) was used as a proxy for hyperspectral UV–visible instrument data to which the Geostationary Environment Monitoring Spectrometer (GEMS) aerosol algorithm was applied. Moderate-Resolution Imaging Spectroradiometer (MODIS) L1B and dark target aerosol Level 2 (L2) data were used with a broadband MI to take advantage of the consistent time gap between the MODIS and the OMI. First, the use of cloud mask information from the MI infrared (IR) channel was tested for synergy. High-spatial-resolution and IR channels of the MI helped mask cirrus and sub-pixel cloud contamination of GEMS aerosol, as clearly seen in aerosol optical depth (AOD) validation with Aerosol Robotic Network (AERONET) data. Second, dust aerosols were distinguished in the GEMS aerosol-type classification algorithm by calculating the total dust confidence index (TDCI) from MODIS L1B IR channels. Statistical analysis indicates that the Probability of Correct Detection (POCD) between the forward and inversion aerosol dust models (DS) was increased from 72% to 94% by use of the TDCI for GEMS aerosol-type classification, and updated aerosol types were then applied to the GEMS algorithm. Use of the TDCI for DS type classification in the GEMS retrieval procedure gave improved single-scattering albedo (SSA) values for absorbing fine pollution particles (BC) and DS aerosols. Aerosol layer height (ALH) retrieved from GEMS was compared with Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) data, which provides high-resolution vertical aerosol profile information. The CALIOP ALH was calculated from total attenuated backscatter data at 1064 nm, which is identical to the definition of GEMS ALH. Application of the TDCI value reduced the median bias of GEMS ALH data slightly. The GEMS ALH bias approximates zero, especially for GEMS AOD values of>~0.4 and GEMS SSA values of<~0.95.Finally, the AOD products from the GEMS algorithm and MI were used in aerosol merging with the maximum-likelihood estimation method, based on a weighting factor derived from the standard deviation of the original AOD products. With the advantage of the UV–visible channel in retrieving aerosol properties over bright surfaces, the combined AOD products demonstrated better spatial data availability than the original AOD products, with comparable accuracy. Furthermore, pixel-level error analysis of GEMS AOD data indicates improvement through MI synergy.
The hydroxyl radical (OH) plays a vital role in tropospheric chemistry, as it provides the dominant sink for a multitude of pollutants and climate-relevant gases such as methane. Observational constraints on the global distribution and temporal variability of OH are limited, and models simulate a wide range of OH distributions. While OH itself has a short atmospheric lifetime, OH is photochemically coupled to longer-lived species that undergo atmospheric transport. Here, we investigate how much of the OH variability within and between models can be explained by differences in observable species to develop diagnostics for OH differences. We find that NO 2 and water vapor together explain much of the spatial and temporal variability in simulated OH, and we use satellite observations to identify biases in these variables. The OH response to ENSO also differs between models, and we investigate potential causes of these differences such as differences in convection or lightning NOx. We also explore the potential of idealized tracers to represent the OH distribution. Within a single model, meteorological variables such as humidity and idealized tracers of transport can explain a significant portion of the OH spatial variability. We use a Gradient Boosted Regression Trees, a type of machine learning, to account for non-linear relationships between OH and the input variables.
This presentation provides an overview of bridging radiative transfer models for meteorology and solar energy applications.
Identification and validation of atmospheric extremes are essential to monitoring climate change, to addressing engineering and safety concerns, and to promoting technological advancement. An international World Meteorological Organization evaluation committee has critically adjudicated and recommended acceptance of two lightning megaflash events (horizontal mesoscale lightning discharges of >100 km in length) as new global extremes using analysis of Geostationary Lightning Mapper data. The world's greatest extent for an individual lightning flash is a single flash that covered a horizontal distance of 709 ± 8 km (441 ± 5 mi) across parts of southern Brazil on 31 October 2018. Furthermore, the greatest duration for a single lightning flash is 16.730 ± 0.002 s from a flash that developed continuously over northern Argentina on 4 March 2019.
Abstract Biomass and fossil fuel burning impact air quality by injecting fine particulate matter (PM 2.5 ) and its precursors into the atmosphere, which poses serious threats to human health. However, the surface concentration of PM 2.5 depends not only on the magnitude of emissions, but also secondary production, transport, and removal. For example, in response to greenhouse gas driven warming, meteorological conditions that govern aerosol removal, primarily through rainfall and wet deposition, could shift in pattern, frequency, and intensity. This climate change driven process can impact air quality even without changes in aerosol emissions. In this experiment, we conduct new simulations by fixing aerosol emissions at present‐day levels in the Community Earth System Model Version 2, but increasing greenhouse gases through the 21st century. In our results, the changes in patterns and intensity of PM 2.5 are found to be associated with precipitation (via aerosol removal), temperature (via secondary organic aerosol (SOA) formation), and moisture and clouds (via sulfate production). A decrease in wet day frequency (∼1.2% global mean) contributes to increases in the surface concentrations of black carbon, primary organic matter, and sulfate in many regions. This is offset in some regions by an upward vertical shift in the level where SOA forms, which contributes to higher column burden but lower surface concentration. These results highlight a need, using a variety of modeling tools, to continually reassess aerosol emissions regulations in response to anticipated climate changes.
Abstract We present an intercomparison of a suite of high‐resolution downscaled climate projections based on a six‐member General Circulation Model (GCM) ensemble from Coupled Models Intercomparison Project (CMIP6). The CMIP6 GCMs have been downscaled using dynamical and statistical downscaling techniques based on two meteorological reference observations over the conterminous United States. We use the regional climate model, RegCM4, for dynamical downscaling, double bias correction constructed analogs method for statistical downscaling, and Daymet and Livneh datasets as the reference observations for statistical training and bias‐correction. We evaluate the performances of downscaled data in both historical and future periods under the SSP585 scenario. While dynamical downscaling improves the simulation of some performance evaluation indices, it adds an extra bias in others, highlighting the need for statistical correction before its use in impact assessments. Downscaled datasets after bias‐correction compare exceptionally well with observations. However, the choice of downscaling techniques and the underlying reference observations influence the hydroclimate characteristics of downscaled data. For instance, the statistical downscaling generally preserves the GCMs climate change signal but overestimates the frequency of hot extremes. Similarly, simulated future changes are sensitive to the choice of reference observations, particularly for precipitation extremes that exhibit a higher projected increase in the ensembles trained and/or corrected by Daymet than Livneh. Overall, these results demonstrate that multiple factors, including downscaling techniques and reference observations, can substantially influence the outcome of downscaled climate projections and stress the need for a comprehensive understanding of such method‐based uncertainties.
This study develops and evaluates a Random Forest (RF) model for estimating planetary boundary layer height (PBLH) using 9 years of data from the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) user facility, with potential application in the NOAA Surface Radiation (SURFRAD) Network. The model integrates ceilometer, surface meteorology, and radiation measurements, and is trained using thermodynamic PBLH estimates derived from radiosondes. This approach aims to bridge gaps between aerosol-based and thermodynamic-based PBLH estimates. The RF model outperformed traditional methods during daytime and better captured transition periods, demonstrating improved accuracy and robustness. At ARM SGP, it showed a substantial reduction in both bias and RMSE, with a bias near zero (−4.9 m) compared with traditional Haar Wavelet (HW) (70.9 m) and Vaisala BL-View software (124.1 m), and an RMSE of 303.2 m, lower than both BL-View (566.9 m) and HW (404.6 m). During daytime hours, RF consistently outperformed both alternatives, maintaining lower bias and RMSE across all periods. At a second evaluation site, RF achieved the lowest overall RMSE (323.7 m), similar to HW (326.4 m) and significantly better than BL-View (738.3 m). However, all models showed reduced accuracy under stable nighttime conditions, limiting the reliability of PBLH estimates. Key predictors for the model included the lifting condensation level height (LCLH), aerosol gradients, and month for seasonal variability. The study underscores the potential of integrating machine learning with multiple data sets such as surface energy and thermodynamic data to advance PBLH estimation.
As renewable energy generation increases, the impacts of weather and climate on energy generation and demand become critical to the reliability of the energy system. However, these impacts are often overlooked. Global climate models (GCMs) can be used to understand possible changes to our climate, but their coarse resolution makes them difficult to use in energy system modelling. Here we present open-source generative machine learning methods that produce meteorological data at a nominal spatial resolution of 4 km at an hourly frequency based on inputs from 100 km daily-average GCM data. These methods run 40 times faster than traditional downscaling methods and produce data that have high-resolution spatial and temporal attributes similar to historical datasets. We demonstrate that these methods can be used to downscale projected changes in wind, solar and temperature variables across multiple GCMs including projections for more frequent low-wind and high-temperature events in the Eastern United States.
Abstract The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) was a yearlong expedition supported by the icebreaker R/V Polarstern , following the Transpolar Drift from October 2019 to October 2020. The campaign documented an annual cycle of physical, biological, and chemical processes impacting the atmosphere-ice-ocean system. Of central importance were measurements of the thermodynamic and dynamic evolution of the sea ice. A multi-agency international team led by the University of Colorado/CIRES and NOAA-PSL observed meteorology and surface-atmosphere energy exchanges, including radiation; turbulent momentum flux; turbulent latent and sensible heat flux; and snow conductive flux. There were four stations on the ice, a 10 m micrometeorological tower paired with a 23/30 m mast and radiation station and three autonomous Atmospheric Surface Flux Stations. Collectively, the four stations acquired ~928 days of data. This manuscript documents the acquisition and post-processing of those measurements and provides a guide for researchers to access and use the data products.
Severe haze events during which particulate matter (PM) increases quickly from tens to hundreds of microgram per cubic meter in 1-2 days frequently occur in China. Although it has been known that PM is influenced by complex interplays among emissions, meteorology, and physical and chemical processes, specific mechanisms remain elusive. In this paper, a new positive feedback mechanism between planetary boundary layer (PBL), relative humidity (RH), and secondary PM (SPM) formation is proposed based on a comprehensive field experiment and model simulation. The decreased PBL associated with increased PM increases RH by weakening the vertical transport of water vapor; the increased RH in turn enhances the SPM formation through heterogeneous aqueous reactions, which further enhances PM, weakens solar radiation, and decreases PBL height. This positive feedback, together with the PM-Radiation-PBL feedback, constitutes a key mechanism that links PM, radiation, PBL properties (e.g. PBL height and RH), and SPM formation, This mechanism is self-amplifying, leading to faster PM production, accumulation, and more severe haze pollution.
The evaluation of optical system performance in fog conditions typically requires field testing. This can be challenging due to the unpredictable nature of fog generation and the temporal and spatial nonuniformity of the phenomenon itself. We describe the Sandia National Laboratories fog chamber, a new test facility that enables the repeatable generation of fog within a 55 m×3 m×3 m (L×W×H) environment, and demonstrate the fog chamber through a series of optical tests. These tests are performed to evaluate system image quality, determine meteorological optical range (MOR), and measure the number of particles in the atmosphere. Relationships between typical optical quality metrics, MOR values, and total number of fog particles are described using the data obtained from the fog chamber and repeated over a series of three tests.
It is demonstrated that a simple evolutionary algorithm can optimize a set of mesoscale atmospheric model parameters with respect to agreement between the mesoscale simulation and a limited set of synthetic observations. This is highlighted using the Regional Atmospheric Modeling System (RAMS). A set of 23 RAMS parameters is optimized by minimizing a cost function based on the root-mean-square (rms) error between the RAMS simulation and synthetic data (observations derived from a separate RAMS simulation). It is found that the optimization can be done with relatively modest computer resources; therefore, operational implementation is possible. The overall number of simulations needed to obtain a specific reduction of the cost function is found to depend strongly on the procedure used to perturb the "child" parameters relative to their "parents" within the evolutionary algorithm. Furthermore, the choice of meteorological variables that are included in the rms error and their relative weighting are also found to be important factors in the optimization.
This is a conference summary report that will be published in the Bulletin of the American Meteorological Society.
Potential temperature and static energy are both useful quantities for understanding our atmosphere, yet static energy receives much less attention in weather science relative to climate science. Bridging this conceptual gap is important, as there is a pressing need for our communities to work together to understand and predict changing weather patterns in a warming world. Here we provide evidence for this gap in usage in American Meteorological Society journal publications and in introductory textbooks. We then describe key benefits of static energy for explaining basic concepts in atmospheric science. We encourage scientists and educators unfamiliar with static energy to familiarize themselves with the concept and consider incorporating it into their science and teaching.
This preliminary data archive includes meteorological data recorded at the Utah FORGE facility over the period of time including the 16A/16B stimulation activities, largely March/April/May of 2024. This information may prove useful for understanding seismic and other instrumentation response during monitoring. The bulk of relevant stimulation activities occurred between March 25th and April 28th, 2024 and the included files span this period. All sensors were installed at the 78-16 pad and hence reflect weather state at the site. This dataset was acquired by the FOGMORE R&D project (Fiber Optic MOnitoring for Reservoir Evolution), Utah FORGE R&D Project 3-2417.