Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microprobe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Study of the photovoltaic effect in thin film barium titanate

The basic mechanism associated with the photovoltaic phenomena observed in the R.F. sputtered BaTiO3/silicon system is presented. Series of measurements of short circuit photocurrents and open circuit photovoltage were made. The composition depth profiles and the interface characteristics of the BaTiO3/silicon system were investigated for a better understanding of the electronic properties. A Scanning Auger Microprobe combined with ion in depth profiling were used.

Grannemann, W. W.↗
NASA NTRS1982

Microstructural analysis of solar cell welds

Parallel-gap resistance welding of silicon solar cells with copper interconnects results in complex microstructural variations that depend on the welding variables. At relatively low heat input solid-state welds are produced. At medium heat the Ag-Cu eutectic forms resulting in a braze joint. High heat produces a fusion weld with complete melting of the silver layer on the silicon solar cell. If the silicon is also melted, cracking occurs in the silicon cell below the weld nugget. These determinations were made using light microscopy, microprobe, and scanning electron microscopy analyses.

Moore, T. J.↗
NASA NTRS1981

Planetary exploration sensor systems

Most of the instruments that have been used in planetary exploration have been either spectrometers or imaging devices. Instruments of these types are being developed for the Galileo and VOIR (Venus Orbiting Imaging Radar) missions. Galileo will take advantage of new CCD (charge-coupled device) technology, and VOIR will use techniques of synthetic aperture radar developed for Seasat. For determining the macrostructure of mineral resources, the best approach is believed to involve acoustic imaging, essentially a seismic data processing technique. Determinations of microstructure would require a light microscope and an electron microscope. For determining the nature and form of volatiles, a differential scanning calorimeter could be used. To determine the mineral composition, an electron beam microprobe with X-ray fluorescence and spectroscopy would be used.

Saunders, R. S.↗
NASA NTRS1982

Microchondrule-bearing clast in the Piancaldoli LL3 meteorite - A new kind of type 3 chondrite and its relevance to the history of chondrules

Electron microprobe, scanning electron microscope, and petrographic analyses of the microchondritic clast of the Piancaldoli LL3 chondrite are reported and compared with other type three chondrites. The clast, like other type three chondrites, has a fine-grained Fe-rich opaque silicate matrix, sharply defined chondrules, abundant low-Ca clinopyroxene and minor troilite and Si and Cr-bearing metallic Fe, Ni. However, the very high model matrix abundance, unique characteristics of the chondrules, and absence of microscopically observable olivine indicate that the clast is a new type of type three chondrite. It is concluded that the microchondrules were formed by the same process that formed normal-sized chondrules in type three chondrites: melting of preexisting dustballs. It is suggested that dust grains were mineralogically sorted in the nebula before aggregating into dustballs.

Rubin, A. E.↗
NASA NTRS1982

The Apollo 14 regolith - Petrology of cores 14210/14211 and 14220 and soils 14141, 14148, and 14149

New modal data are presented for continuous polished thin sections from double drive tube 14210/14211, and single drive tube 14220, and for polished grain mounts of four soils from the double drive tube, one from the single drive tube, and the soils 14148 (trench top), 14149 (trench bottom), and 14141 (Cone Crater). Modal data show that the Cone Crater soil is immature, whereas the 'smooth plains' soils are mature and rich in agglutinates and breccias. Neither core exhibits any major variations with depth. Microprobe analyses of mineral and glass fragments are consistent with derivation of the soils predominantly from the local rocks, with about 5-11% exotic mare component indicated by the modal data. About 4% of the glasses are SiO2- and K2O-rich granitic glasses which are comminuted mesostasis from the local melt rocks. The soils are depleted in feldspar relative to the source rocks. The preferred explanation for this depletion is that feldspar is concentrated in the less than 10 microns fines and is consumed in the formation of agglutinates, regolith breccias, and feldspathic glass.

Simon, S. B.↗
NASA NTRS1982

The Tucson iron and its relationship to enstatite meteorites

The Tucson meteorite was studied in order to search for the origin of its silicates and to explore a possible relationship between Tucson and the enstatite meteorites. All samples were analyzed with an electron microprobe. The silicate inclusions are described in terms of size and texture, and the silicate mineralogy, which is that of a highly reduced assemblage, is described. The bulk composition of the silicate inclusions is discussed. The results provide evidence of fast cooling. The textural and mineralogical data all point to the presence of a high temperature melt followed by rapid cooling and quenching. Several hypotheses for the origin of the Tucson are discussed, and it is concluded that the preferred hypothesis is that the meteorite formed by the high temperature impact mixing of a forsterite-enstatite silicate assemblage with Si-bearing metal, both having formed in a highly reduced environment.

Nehru, C. E.↗
NASA NTRS1982

Petrography, mineral chemistry and origin of Type I enstatite chondrites

The petrography and mineralogy of four Type I enstatite chondrites were examined by optical and cathololuminescent and electron microprobe means to discern particular chemical and mechanical processes present during solar system condensation. The specimens examined included sections of the Indarch, Abee, Kota-Kota, and Adhi-Kot chondrites. Textural interpretations were performed, as well as chemical analyses of the degree of similarity of the clinoenstatite, olivine, accessory silicates, metal, schreibersite, troilite, oldhamite, and niningerite grains in each sample. Simple models of progressive condensation either at equilibrium or with mechanical removal of early condensates were ruled out due to the occurrence of both blue and red enstatite crystals in metal clasts. A need for sequential processes of mixing, melting, crystallization, condensation, fracturing, and mechanical aggregation are suggested as necessary to model the formation mechanisms of the mineral aggregates.

Leitch, C. A.↗
NASA NTRS1983

Nature of the H chondrite parent body regolith - Evidence from the Dimmitt breccia

Meteorite regolith breccias are clastic rocks which formed by lithification of fragmental regolith material that once resided at the surface of a meteorite parent body. A study is reported of the matrix and 21 clasts of various sizes (0.2-24 mm) in the Dimmitt H chondrite regolith breccia using petrographic and electron microprobe techniques. In addition, oxygen isotope studies of three clasts and instrumental neutron activation analysis (INAA) and Ar-39/Ar-40 age dating of one clast are reported. The Dimmitt meteorite was found about 1942 near Dimmitt, Texas. Attention is given to analytical procedures, the clastic matrix, equilibrated clasts, poikilitic melt-rock clast, clasts of different chondrite groups, graphite-magnetite aggregates, the origin of exotic clasts, and the complexity of parent body surfaces processes.

Rubin, A. E.↗
NASA NTRS1983

Petrology of igneous lithic clasts from polymict eucrites ALHA76005 and ALHA77302

A total of seven lithic clasts from the polymict eucrites ALHA76005 and ALHA77302 have been studied petrographically and analyzed with the electron microprobe. All clasts are composed predominantly of pyroxene and plagioclase, + or - ilmenite, troilite, Fe-Ni metal, mesostasis, and silica. Pyroxene compositions in unequilibrated clasts and clast bulk compositions, calculated by modal recombination, indicate that the clasts originally crystallized under similar conditions and that they may be genetically related to each other by fractionation of pigeonite and plagioclase.

Simon, S. B.↗
NASA NTRS1983

Interfacial layers in high-temperature-oxidized NiCrAl

The utility of Auger electron spectroscopy combined with ball cratering for depth analysis of oxide and diffusion layers produced in a Ni-14Cr-24Al alloy by oxidation in air at 1180 C for 25 hr is demonstrated. During postoxidation cooling, the oxide layers formed by this alloy spalled profusely. The remaining very thin oxide was primarily Cr2O3 with a trace of Ni. The underlying metal substrate exhibited gamma/gamma-prime and beta phases with a metallic interfacial layer which was similar to the bulk gamma/gamma-prime phase but slightly enriched in Cr and Al. These data are compared to electron microprobe results from a nominally identical alloy. The diffusion layer thickness is modelled with a simple mass balance equation and compared to recent results on the diffusion process in NiCrAl alloys.

Larson, L. A.↗
NASA NTRS1983

Origin of Archean anorthosites - Evidence from the Bad Vermilion Lake anorthosite complex, Ontario

Studies of the petrology and geochemistry of the anorthosite complex at Bad Vermillion Lake, Canada, based on 400 samples collected in summer, 1979, are presented. Petrographic, microprobe, X-ray-fluorescence, and instrumental-neutron-activation analyses were performed. Major and trace-element abundances of the anorthositic rocks and surrounding mafic and felsic rocks are reported in tables, chondrite-normalized rare-earth-element patterns are shown, and the anorthositic, intrusive, and metavolcanic formations are characterized in detail. The anothrositic plagioclases are found to have a coarse porphyritic texture and calcic composition (80 normative mol percent An) similar to those of other Archean anorthosite complexes. Chemical similarities indicate that the gabbro and mafic to felsic metavolcanic formations associated with the anorthosite complex may be comagmatic with it, while the absence of ultramafic material and the bulk composition of the comagmatic basalt (about 20 wt percent Al2O3) suggest that much of the original comagmatic material has been separated.

Ashwal, L. D.↗
NASA NTRS1983

Radiative properties of advanced spacecraft heat shield materials

Experimental results are presented to show the effects of simulated reentry exposure by convective heating and by radiant heating on spectral and total emittance of statically oxidized Inconel 617 and Haynes HS188 superalloys to 1260 K and a silicide coatea (R512E) columbium 752 alloy to 1590 K. Convective heating exposures were conducted in a supersonic arc plasma wind tunnel using a wedge-shaped specimen configuration. Radiant tests were conducted at a pressure of .003 atmospheres of dry air at a flow velocity of several meters per second. Convective heating specimens were subjected to 8, 20, and 38 15-min heating cycles, and radiant heating specimens were tested for 10, 20, 50, and 100 30-min heating cycles. Changes in radiative properties are explained in terms of changes in composition resulting from simulated reentry tests. The methods used to evaluate morphological, compositional and crystallographic changes include: Auger electron spectroscopy; scanning electron microscopy; X-ray diffraction analysis; and electron microprobe analysis.

Cunnington, G. R.↗
NASA NTRS1984

Chemical mechanisms and reaction rates for the initiation of hot corrosion of IN-738

Sodium-sulfate-induced hot corrosion of preoxidized IN-738 was studied at 975 C with special emphasis placed on the processes occurring during the long induction period. Thermogravimetric tests were run for predetermined periods of time, and then one set of specimens was washed with water. Chemical analysis of the wash solutions yielded information about water soluble metal salts and residual sulfate. A second set of samples was cross sectioned dry and polished in a nonaqueous medium. Element distributions within the oxide scale were obtained from electron microprobe X-ray micrographs. Evolution of SO was monitored throughout the thermogravimetric tests. Kinetic rate studies were performed for several pertinent processes; appropriate rate constants were obtained from the following chemical reactions: Cr2O3 + 2 Na2SO4(1) + 3/2 O2 yields 2 Na2CrO4(1) + 2 SO3(g)n TiO2 + Na2SO4(1) yields Na2O(TiO2)n + SO3(g)n TiO2 + Na2CrO4(1) yields Na2O(TiO2)n + CrO3(g).

Fryburg, G. C.↗
NASA NTRS1984

Oxidation and corrosion resistance of candidate Stirling engine heater-head-tube alloys

Sixteen candidate iron base Stirling engine heater head tube alloys are evaluated in a diesel fuel fired simulator materials test rig to determine their oxidation and corrosion resistance. Sheet specimens are tested at 820 C for 3500 hr in 5 hr heating cycles. Specific weight change data and an attack parameter are used to categorize the alloys into four groups; 10 alloys show excellent for good oxidation and corrosion resistance and six alloys exhibit poor or catastrophic resistance. Metallographic, X-ray, and electron microprobe analyses aid in further characterizing the oxidation and corrosion behavior of the alloys. Alloy compositions, expecially the reactive elements aluminum, titanium, and chromium, play a major role in the excellent oxidation and corrosion behavior of the alloys. The best oxidation resistance is associated with the formation of an iron nickel aluminum outer oxide scale, an intermediate oxide scale rich in chromium and titanium, and an aluminum outer oxide scale adjacent to the metallic substrate, which exhibits a zone of internal oxidation of aluminum and to some extent titanium.

Stephens, J. R.↗
NASA NTRS1983

Laboratory actinide partitioning - Whitlockite/liquid and influence of actinide concentration levels

The partition coefficients between synthetic whitlockite (beta Ca-phosphate) and coexisting silicate melts are determined for the actinide elements Th, U and Pu. Experiments were performed at 1 bar pressure and 1250 C at oxygen fugacities from 10 to the -8.5 to 10 to the -0.7 bars, and partitioning was determined from trace element radiography combined with conventional electron microprobe analysis. Results show Pu to be more readily incorporated into crystalline phases than U or Th under reducing conditions, which is attributed to the observation that Pu exists primarily in the trivalent state, while U and Th are tetravalent. Corrected partition coefficients for whitlockite of 3.6, less than or equal to 0.6, 1.2, 0.5 and less than or equal to 0.002 are estimated for Pu(+3), Pu(+4), Th(+4), U(+4) and U(+6), respectively. Experiments performed at trace levels and percent levels of UO2 indicate that Si is involved in U substitution in whitlockite, and show a reduced partition coefficient at higher concentrations of U that can be explained by effects on melt structure or the fraction of tetravalent U.

Benjamin, T. M.↗
NASA NTRS1983

Comparison of Yamato and Victoria Land polymict eucrites - A view from mineralogical and isotopic studies

New interior samples of four Yamato polymict eucrites (Y74159, Y74450, Y75011, and Y75015) have been studied by electron microprobe, transmission electron microscope, and X-ray diffraction techniques, and compared with several samples of the Victoria Land polymict eucrites. These same samples have been analysed using Rb-Sr and Nd-Sm isotopic systematics. Several grains of inverted pigeonite, with blebby augite similar to those in Binda and Moama, have been identified in all four Yamato eucrites. Coarse-grained meso-stasis-rich subophitic basalts, which contain Mg-rich pigeonite (with Fe-rich olivine veinlets) zoned outward to a subcalcic ferroaugite rims, have also been found. These unique clasts were not found in ALH76005, 77302, 78040, 7858, and 78165 and EET eucrites. The tight grouping of Rb/Sr and Sm/Nd ratos, and similar modal compositions of the Yamato group indicate that they are most likely to be pieces from a single fall, and distinct from the ALH and EET groups. However, the Yamato, Allan Hills, and Elephant Moraine groups may sample a few distinct magmas or similar but different source regions on the same parent body.

Takeda, H.↗
NASA NTRS1983

A three-dimensional study of metal grains in equilibrated, ordinary chondrites

Metal particles in Guarena (H6), Colby (L6) and St. Severin (LL6) were studied by optical microscopy and by electron microprobe analysis. Observations from successive polished sections through the metal particles show that kamacite and taenite grains, which often appear to be isolated particles, are connected directly or by intervening sulfides. Also tetrataenite rims are widest when adjacent to sulfide or kamacite. These observations indicate that transfer of Ni during cooling when kamacite-taenite phase growth takes place does not occur through the silicate phases but proceeds through metal and sulfide phases or along grain boundaries. By utilizing the central Ni content of taenite grains from successive sections, metallographic cooling rates were determined more precisely than by using one arbitrary section. Cooling rates determined in this manner for Guarena, Colby, and St. Severin are 4.3 K, 4.0 K, and 1.0 K per million years, respectively.

Willis, J.↗
NASA NTRS1983

A new layered mineral from the Mighei carbonaceous chondrite

The poorly characterized phase (PCP) of the Mighei CM2 carbonaceous chondrite is investigated using high-resolution TEM. Electron-microprobe analyses of samples from both olivine chondrules and the matrix are included in a table. Chondrule PCP is found to have higher concentrations of S and Ni and lower concentrations of Si, Mg, and Al than matrix PCP. TEM shows that PCP in this chondrite is an intergrowth of three phases (in various proportions): a major component containing Fe, S, Ni, and O in wavy rolled layers spaced about 5.4 A apart, an Fe-rich serpentinelike phyllosilicate with 7-A layer spacing, and submicron grains of magnetite, chromite, and phosphate. It is proposed that chondrule PCP contains mainly the 5-A phase with some grains, while matrix PCP consists mostly of the 5-A and 7-A phases.

Tomeoka, K.↗