Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Hydrodynamic models of a Cepheid atmosphere. I - Deep envelope models

The implicit hydrodynamic code of Kutter and Sparks has been modified to include radiative transfer effects. This modified code has been used to compute deep envelope models of a classical Cepheid with a period of 12 days. It is shown that in this particular model the hydrogen ionization region plays only a small role in producing the observed phase lag between the light and velocity curves. The cause of the bumps on the model's light curve is examined, and a mechanism is presented to explain those Cepheids with two secondary features on their light curves. This mechanism is shown to be consistent with the Hertzsprung sequence only if the evolutionary mass-luminosity law is used.

Karp, A. H.↗
NASA NTRS1977

Atmospheric model development in support of SEASAT. Volume 4: Forecast model sensitivity study

Atmospheric analysis and prediction models of varying (grid) resolution were developed. The models were tested using real observational data for the purpose of assessing the impact of grid resolution on short range numerical weather prediction. The work statement was amended to include the performance of sensitivity tests using a coarse mesh (63 x 63 x 5 level) prediction model in order to identify and order factors which might mask or impair the utility of SEASAT data on short range weather prediction. Such factors included: initial conditions; topography; surface friction; latent heating; diffusion of momentum and temperature; and computational devices such as tendency truncators, pressure smoothers, and temporal filters.

Lewit, H. L.↗
NASA NTRS1979

Analytical model of an Annular Momentum Control Device (AMCD) laboratory test model magnetic bearing actuator

An analytical model of an Annular Momentum Control Device (AMCD) laboratory test model magnetic bearing actuator with permanent magnet fluxbiasing is presented. An AMCD consists of a spinning annular rim which is suspended by a noncontacting linear electromagnetic spin motor. The actuator is treated as a lumped-parameter electromechanical system in the development of the model.

Groom, N. J.↗
NASA NTRS1979

Application of hybrid coordinate modeling and multilevel control techniques to a single axis torsional model

Hybrid coordinate modeling and multilevel control techniques are applied to a prototype flexible vehicle. The original hybrid coordinate model developed for this vehicle is expressed in terms of one rigid body coordinate and two modal vibration coordinates. Multilevel control techniques of decomposition, coordination and construction of the subproblem hierarchy are applied to this model.

Chichester, F. D.↗
NASA NTRS1980

A model of CO-CH4 global transport/chemistry. I - Chemistry model

A simplified chemistry model was developed to incorporate the CO-CH4 chemistry into the global transport model of these compounds. CO is important because of its effects on atmospheric chemistry and is partly responsible for controlling the hydroxyl radical (OH) concentration in the troposphere. The model includes the photodissociation rate coefficients expressed as functions of solar zenith angle and altitude, and it was applied to determine the sensitivity of the OH concentration to trace gaseous species, such as NOx, O3, and H2O. Also, the concentrations and diurnal variations of OH and HO2, and the contribution of individual reactions to OH generation and consumption were calculated.

Peters, L. K.↗
NASA NTRS1980

A Mathematical Model for Vertical Attitude Takeoff and Landing (VATOL) Aircraft Simulation: Model Description Application - Volume 1

A mathematical model of a high performance airplane capable of vertical attitude takeoff and landing (VATOL) was developed. An off line digital simulation program incorporating this model was developed to provide trim conditions and dynamic check runs for the piloted simulation studies and support dynamic analyses of proposed VATOL configuration and flight control concepts. Development details for the various simulation component models and the application of the off line simulation program, Vertical Attitude Take-Off and Landing Simulation (VATLAS), to develop a baseline control system for the Vought SF-121 VATOL airplane concept are described.

Fortenbaugh, R. L.↗
NASA NTRS1982

Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 2: Models for sidewall trim, stiffened structures and cabin acoustics with floor partition

An airplane interior noise prediction model is developed to determine the important parameters associated with sound transmission into the interiors of airplanes, and to identify apropriate noise control methods. Models for stiffened structures, and cabin acoustics with floor partition are developed. Validation studies are undertaken using three test articles: a ring stringer stiffened cylinder, an unstiffened cylinder with floor partition, and ring stringer stiffened cylinder with floor partition and sidewall trim. The noise reductions of the three test articles are computed using the heoretical models and compared to measured values. A statistical analysis of the comparison data indicates that there is no bias in the predictions although a substantial random error exists so that a discrepancy of more than five or six dB can be expected for about one out of three predictions.

Pope, L. D.↗
NASA NTRS1982

Modeling and analysis of several classes of self-oscillating inverters. I - State-plane representations. II - Model extension, classification, and duality relationships

The present investigation is concerned with an important class of power conditioning networks, taking into account self-oscillating dc-to-square-wave transistor inverters. The considered circuits are widely used both as the principal power converting and processing means in many systems and as low-power analog-to-discrete-time converters for controlling the switching of the output-stage semiconductors in a variety of power conditioning systems. Aspects of piecewise-linear modeling are discussed, taking into consideration component models, and an equivalent-circuit model. Questions of singular point analysis and state plane representation are also investigated, giving attention to limit cycles, starting circuits, the region of attraction, a hard oscillator, and a soft oscillator.

Lee, F. C. Y.↗
NASA NTRS1981

Performance comparison for Barnes model 12-1000, Exotech model 100, and Ideas Inc. Biometer Mark 2

Results of tests show that all channels of all instruments, except channel 3 of the Biometer Mark 2, were stable in response to input signals were linear, and were adequately stable in response to temperature changes. The Biometer Mark 2 is labelled with an inappropriate description of the units measured and the dynamic range is a inappropriate for field measurements causing unnecessarily high fractional errors. This instrument is, therefore, quantization limited. The dynamic range and noise performance of the Model 12-1000 are appropriate for remote sensing field research. The field of view and performance of the Model 100A and the Model 12-1000 are satisfactory. The Biometer Mark 2 has not, as yet, been satisfactorily equipped with an acceptable field of view determining device. Neither the widely used aperture plate nor the 24 deg cone are acceptable.

Robinson, B.↗
NASA NTRS1982

Snowmelt runoff modeling in simulation and forecasting modes with the Martinec-Mango model

The Martinec-Rango snowmelt runoff model was applied to two watersheds in the Rio Grande basin, Colorado-the South Fork Rio Grande, a drainage encompassing 216 sq mi without reservoirs or diversions and the Rio Grande above Del Norte, a drainage encompassing 1,320 sq mi without major reservoirs. The model was successfully applied to both watersheds when run in a simulation mode for the period 1973-79. This period included both high and low runoff seasons. Central to the adaptation of the model to run in a forecast mode was the need to develop a technique to forecast the shape of the snow cover depletion curves between satellite data points. Four separate approaches were investigated-simple linear estimation, multiple regression, parabolic exponential, and type curve. Only the parabolic exponential and type curve methods were run on the South Fork and Rio Grande watersheds for the 1980 runoff season using satellite snow cover updates when available. Although reasonable forecasts were obtained in certain situations, neither method seemed ready for truly operational forecasts, possibly due to a large amount of estimated climatic data for one or two primary base stations during the 1980 season.

Shafer, B.↗
NASA NTRS1981

Reference model atmosphere calculation - The Sunspot sunspot model

A composite temperature-density model of sunspots is developed from the results of five previous modeling attempts. The model is designed to describe the region extending from the deepest photospheric layers up through the chromosphere-corona transition region. Photospheric, chromospheric, and transition region temperature distributions proposed by other authors are employed to quantity the phenomena out to 2280 km. Additional calculations yield the various line profiles, the internal properties of the region above the sunspot including the chromospheric net radiative cooling rates, and the radiative flux as a function of depth in the photosphere. Observations of the hydrogen ion flux is used to account for the net cooling in the temperature minimum region. Furthermore, the integrated radiative flux is found to be constant with depth in the photosphere.

Avrett, E. H.↗
NASA NTRS1982

Climate studies with a multi-layer energy balance model. I - Model description and sensitivity to the solar constant. II - The role of feedback mechanisms in the CO2 problem

A nine-layer zonally averaged, steady-state model, based upon thermal energy balance, is developed for use in climate sensitivity studies and includes an accurate treatment of radiative transfer, parameterized meridional and vertical energy transport, and thermodynamic interaction between the surface and the atmosphere. A high degree of nonlinearity is exhibited by the model in a study of sensitivity to changes in the solar constant. The change in the hemispheric mean surface temperature is +3.1 C in response to a 2% increase in the solar constant and -4.3 C in response to a 2% decrease in the solar constant. The sensitivity varies with latitude, and the response of atmospheric temperature varies with height. In addition, the model is used to study the sensitivity of climate to a doubling of the atmospheric CO2 content. It is found that the tropospheric temperature lapse rate decreases at low latitudes but increases at high latitudes in response to a doubled CO2 content. Averaged over the Northern Hemisphere, the change is +2.3 C in the surface temperature and +0.47 C in the earth's brightness temperature. The effects of some feedback mechanisms on the climate sensitivity to a doubled CO2 content show that the sensitivity of surface temperature approximately doubles at all latitudes due to the change in water vapor content.

Peng, L.↗
NASA NTRS1984

Diagnosis of the GLAS climate model's stationary planetary waves using a linearized steady state model

Orography and geographically fixed heat sources which force a zonally asymmetric motion field are examined. An extensive space-time spectral analysis of the GLAS climate model (D130) response and observations are compared. An updated version of the model (D150) showed a remarkable improvement in the simulation of the standing waves. The main differences in the model code are an improved boundary layer flux computation and a more realistic specification of the global boundary conditions.

Youngblut, C.↗
NASA NTRS1984

An interactive modeling program for the generation of planar polygons for boundary type solids representations of wire frame models

The development of a general link between three dimensional wire frame models and rigid solid models is discussed. An interactive computer graphics program was developed to serve as a front end to an algorithm (COSMIC Program No. ARC-11446) which offers a general solution to the hidden line problem where the input data is either line segments of n-sided planar polygons of the most general type with internal boundaries. The program provides a general interface to CAD/CAM data bases and is implemented for models created on the Unigraphics VAX 11/780-based CAD/CAM systems with the display software written for DEC's VS11 color graphics devices.

Ozsoy, T.↗
NASA NTRS1983

A mathematical model for crop spectral-temporal trajectories based on a plant growth model

The Kubelka-Munk radiative transfer model is combined with an approximation of Kauth-Thomas greeness and brightness transforms to derive approximate closed form expressions for crop greeness and brightness surrogates in terms of canopy biomass. The greeness relation derived resembles an existing empirical relation between leaf area index and greeness. A simple growth model based on interception and utilization of photosynthetically active radiation is developed and used to describe the time evolution of greeness and brightness. The model developed does not yet yield definitive profile calculations but suggests a conceptual framework which may be found useful for further profile analysis.

Woolford, T. L.↗
NASA NTRS1982

Empirical testing of an analytical model predicting electrical isolation of photovoltaic models

A major design requirement for photovoltaic modules is that the encapsulation system be capable of withstanding large DC potentials without electrical breakdown. Presented is a simple analytical model which can be used to estimate material thickness to meet this requirement for a candidate encapsulation system or to predict the breakdown voltage of an existing module design. A series of electrical tests to verify the model are described in detail. The results of these verification tests confirmed the utility of the analytical model for preliminary design of photovoltaic modules.

Garcia, A., III↗
NASA NTRS1984

Growth/reflectance model interface for wheat and corresponding model

The use of modeling to explore the possibility of discovering new and useful crop condition indicators which might be available from the Thematic Mapper and to connect these symptoms to the biological causes in the crop is discussed. A crop growth model was used to predict the day to day growth features of the crop as it responds biologically to the various environmental factors. A reflectance model was used to predict the character of the interaction of daylight with the predicted growth features. An atmospheric path radiance was added to the reflected daylight to simulate the radiance appearing at the sensor. Finally, the digitized data sent to a ground station were calculated. The crop under investigation is wheat.

Suits, G. H.↗