Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Optical Injection Locking of a VCSEL in an OEO

Optical injection locking has been demonstrated to be effective as a means of stabilizing the wavelength of light emitted by a vertical-cavity surface- emitting laser (VCSEL) that is an active element in the frequency-control loop of an opto-electronic oscillator (OEO) designed to implement an atomic clock based on an electromagnetically- induced-transparency resonance. This particular optical-injection- locking scheme is expected to enable the development of small, low-power, high-stability atomic clocks that would be suitable for use in applications involving precise navigation and/or communication. In one essential aspect of operation of an OEO of the type described above, a microwave modulation signal is coupled into the VCSEL. Heretofore, it has been well known that the wavelength of light emitted by a VCSEL depends on its temperature and drive current, necessitating thorough stabilization of these operational parameters. Recently, it was discovered that the wavelength also depends on the microwave power coupled into the VCSEL. Inasmuch as the microwave power circulating in the frequency-control loop is a dynamic frequency-control variable (and, hence, cannot be stabilized), there arises a need for another means of stabilizing the wavelength. The present optical-injection-locking scheme satisfies the need for a means to stabilize the wavelength against microwave- power fluctuations. It is also expected to afford stabilization against temperature and current fluctuations. In an experiment performed to demonstrate this scheme, wavelength locking was observed when about 200 W of the output power of a commercial tunable diode laser was injected into a commercial VCSEL, designed to operate in the wavelength range of 795+/-3 nm, that was generating about 200 microW of optical power. (The use of relatively high injection power levels is a usual practice in injection locking of VCSELs.)

Strekalov, Dmitry↗
NASA NTRS1984

Comparison of winds, waves, and turbulence as observed by airborne lidar, ground-based radars, and instrumented tower

On June 29, 1981, two ground-based Doppler radars, an airborne Doppler optical radar (lidar), an instrumented tower, and a rawinsonde were employed to collect wind data in the planetary boundary layer (PBL) in central Oklahoma. The main objectives of this experiment were related to a comparison of wind estimates and the visualization of the three-dimensional eddy structure in the convective atmospheric boundary layer. Discrepancies in the mean wind and wind profile detected by the different sensing systems were explained as being caused by a Schuler resonance of the aircraft's inertial navigation system, which caused an erroneous component of the aircraft's ground-relative velocity vector to be subtracted from the lidar-measured radial velocities. It is concluded that NASA's airborne Doppler optical radar system is capable of measuring wind fields in clear air on a smaller scale than was previously available with fixed remote sensors.

Eilts, M. D.↗
NASA NTRS2016

Space Mobile Network: A Near Earth Communications and Navigation Architecture

This paper shares key findings of NASA's Earth Regime Network Evolution Study (ERNESt) team resulting from its 18-month effort to define a wholly new architecture-level paradigm for the exploitation of space by civil space and commercial sector organizations. Since the launch of Sputnik in October 1957 spaceflight missions have remained highly scripted activities from launch through disposal. The utilization of computer technology has enabled dramatic increases in mission complexity; but, the underlying premise that the diverse actions necessary to meet mission goals requires minute-by-minute scripting, defined weeks in advance of execution, for the life of the mission has remained. This archetype was appropriate for a "new frontier" but now risks overtly constraining the potential market-based opportunities for the innovation considered necessary to efficiently address the complexities associated with meeting communications and navigation requirements projected to be characteristics of the next era of space exploration: a growing number of missions in simultaneous execution, increased variance of mission types and growth in location/orbital regime diversity. The resulting ERNESt architectural cornerstone - the Space Mobile Network (SMN) - was envisioned as critical to creating an environment essential to meeting these future challenges in political, programmatic, technological and budgetary terms. The SMN incorporates technologies such as: Disruption Tolerant Networking (DTN) and optical communications, as well as new operations concepts such as User Initiated Services (UIS) to provide user services analogous to today's terrestrial mobile network user. Results developed in collaboration with NASA's Space Communications and Navigation (SCaN) Division and field centers are reported on. Findings have been validated via briefings to external focus groups and initial ground-based demonstrations. The SMN opens new niches for exploitation by the marketplace of mission planners and service providers.

Space Communication Spacecraft↗
NASA NTRS2002

Navigation of the Deep Space 1 spacecraft at Borrelly

The navigation challenges posed by Deep Space 1's flyby of comet Borrelly were considerable due to the uncertainty in the knowledge of the comet's ephemeris, as well as difficulty in determining the spacecraft's ephemeris caused by relatively large non-gravitational forces acting on the comet. The challenges were met by using a combination of radio, optical, and interferometric data types to obtain a final fly by accuracy of less than 10 km.

comet encounter navigation autonomous navigation n↗
NASA NTRS1982

Voyager 1 and Voyager 2 Saturn encounter orbit determination

This paper contains quantitative results and conclusions from the Saturn approach orbit determination for Voyagers 1 and 2. The major topics covered include an overview of the navigation-related requirements and a review of the salient orbit determination results obtained. Special attention is paid to the use of combined spacecraft-based optical observations and earth-based radiometric observations to achieve accurate orbit determination during the Saturn encounter approach phase.

Campbell, J. K.↗
NASA NTRS1988

Deep space target location with Hubble Space Telescope (HST) and Hipparcos data

Interplanetary spacecraft navigation requires accurate a priori knowledge of target positions. A concept is presented for attaining improved target ephemeris accuracy using two future Earth-orbiting optical observatories, the European Space Agency (ESA) Hipparcos observatory and the Nasa Hubble Space Telescope (HST). Assuming nominal observatory performance, the Hipparcos data reduction will provide an accurate global star catalog, and HST will provide a capability for accurate angular measurements of stars and solar system bodies. The target location concept employs HST to observe solar system bodies relative to Hipparcos catalog stars and to determine the orientation (frame tie) of these stars to compact extragalactic radio sources. The target location process is described, the major error sources discussed, the potential target ephemeris error predicted, and mission applications identified. Preliminary results indicate that ephemeris accuracy comparable to the errors in individual Hipparcos catalog stars may be possible with a more extensive HST observing program. Possible future ground and spacebased replacements for Hipparcos and HST astrometric capabilities are also discussed.

Null, George W.↗
NASA NTRS1988

Galilean satellite ephemeris improvement using Galileo tour encounter information

Accurate navigation of the satellite tour portion of the Galileo mission requires an accurate ephemeris of the Galilean satellites. The ephemeris is updated using radiometric and optical tracking data acquired during the satellite tour. The improved accuracy of the satellite ephemeris leads to improved targeting accuracy at subsequent encounters. The Galileo mission will benefit from improved targeting accuracy through reduced propellant costs and improved pointing accuracy. The predicted error in the updated ephemeris can be less than approximations inherent in the analytical theory used for the ephemeris, so an alternate numerical representation is applied. This alternate description shows promise but also raises questions of numerical stability.

Murrow, D. W.↗
NASA NTRS1993

Micro guidance and control synthesis: New components, architectures, and capabilities

New GN&C (guidance, navigation and control) system capabilities are shown to arise from component innovations that involve the synergistic use of microminiature sensors and actuators, microelectronics, and fiber optics. Micro-GN&C system and component concepts are defined that include micro-actuated adaptive optics, micromachined inertial sensors, fiber-optic data nets and light-power transmission, and VLSI microcomputers. The thesis is advanced that these micro-miniaturization products are capable of having a revolutionary impact on space missions and systems, and that GN&C is the pathfinder micro-technology application that can bring that about.

Mettler, Edward↗
NASA NTRS1995

The Clementine Mission

The Clementine Mission is summarized from purposes of the mission through details of the instruments. The mission was a joint Department of Defense and NASA mission to use lighter instruments and other equipment developed by the military for space exploration. New lightweight items on Clementine include batteries, optical sensors, reaction wheels, star trackers, release systems, and inertial measurement units. Other items include a compression chip set, a solid state data recorder, autonomous navigation, and a 32-bit RISC computer.

space↗
NASA NTRS2022

Silicon Photonic Transceiver for Spacecraft Navigational Lidar

NASA is developing an entry, descent, and landing (EDL) lidar system, the Navigation Doppler Lidar (NDL), for high-precision landing on the Moon, Mars, and beyond. The current flight NDL systems use 1550 nm fiber-optic components for frequency-modulated continuous wave (FMCW) ranging beyond 5 km, but have reduced performance under vibrational and thermal stresses during EDL. Here we describe recent efforts to develop a breadboard silicon photonic optical transceiver for integration into NDL to reduce instrument size and improve robustness to environment and demonstrate the optical balanced receiver performance during testing with the breadboard NDL unit. Initial testing shows improved suppression of common mode noise by 25 dB over the current receiver, but a 10 dB reduction in signal to noise ratio (SNR) resulting from coupling losses from fiber to the on-chip waveguides. Future work will target reduced coupling loss, hermetic packaging, and co-integration of a single sideband suppressed carrier modulator into the same chip.

Photonic Integrated Circuits↗
NASA NTRS2004

6-DOF aerobraking trajectory reconstruction by use of inertial measurements unit (IMU) data for the improvement of aerobraking navigation

For any interplanetary mission, there are certain types of data that are used as a means of determining both the position and velocity of a spacecraft. The data types currently in use are Doppler, Range, Optical and VLBI. All of them are radiometric with the exception of the Optical data type. NASA's Deep Space Network is employed for the purpose of transmitting and receiving data to and from the spacecraft repsectively. For this exchange of information to take place, both the DSN and spacecrft high gain antennae must be pointed towards each other.

Lisano, Michael E.↗
NASA NTRS2006

Uses of the ICRF and implications for future VLBI

Since its inception on 1 Jan 1998, the fundamental ICRF has been set by the VLBI positions of 212 "defining" extragalactic radio sources. In all there are approx.3000 sources with usefully accurate (< few mas) positions consistent with the ICRF. The uses of the ICRF include fundamental astrometry, monitoring of Earth orientation, and spacecraft navigation. For fundamental astrometry, stability and accuracy are most important, and realizations at different frequencies must be in proper registration. However, there is no preferred frequency, and the GAIA mission has the potential for an optical ICRF with 500,000 objects at the 50 microarcsec level some time after the planned 2011 launch. The radio ICRF should be properly prepared for a transition to assure long term stability and consistency. Earth orientation monitoring requires objects attached to the solid Earth, and VLBI will continue to be the fundamental technique. For this purpose it is essential that the new VLBI stations contemplated in the VLBI20l0 report be capable of observing a sufficiently large and well-distributed set of stable sources, and identifying these sources is an on-going effort. Spacecraft navigation by differential VLBI is planned using the Ka-band telemetry signal, and work has begun towards an ICRF realization suitable for this purpose. The balancing of different needs related to the VLBI ICRF will be discussed.

Ma, Chopo↗
NASA NTRS2004

Laser Ranging to the Moon, Mars and Beyond

Current and future optical technologies will aid exploration of the Moon and Mars while advancing fundamental physics research in the solar system. Technologies and possible improvements in the laser-enabled tests of various physical phenomena are considered along with a space architecture that could be a cornerstone for robotic and human exploration in the solar system. In particular, accurate ranging to the Moon and Mars would not only lead to construction of a new space communication infrastructure enabling improved navigational accuracy, but would provide a significant improvement in several tests of gravitational theory: the equivalence principle, geodetic precession, PPN parameters beta and gamma, and the constancy of the gravitational constant G. Other tests would become possible with an optical architecture that would allow proceeding from cm to mm to sub-mm range accuracies. Looking to future exploration, what characteristics are desired for the next generation of ranging devices, what is the optimal architecture that would benefit both space exploration and fundamental physics, and what fundamental questions can be investigated?

Turyshev, Slava G.↗
NASA NTRS2012

Interplanetary CubeSats: Opening the Solar System to a Broad Community at Lower Cost

Interplanetary CubeSats could enable small, low-cost missions beyond low Earth orbit. This class is defined by mass < ~ 10 kg, cost < $30 M, and durations up to 5 years. Over the coming decade, a stretch of each of six distinct technology areas, creating one overarching architecture, could enable comparatively low-cost Solar System exploration missions with capabilities far beyond those demonstrated in small satellites to date. The six technology areas are: (1) CubeSat electronics and subsystems extended to operate in the interplanetary environment, especially radiation and duration of operation; (2) Optical telecommunications to enable very small, low-power uplink/downlink over interplanetary distances; (3) Solar sail propulsion to enable high !V maneuvering using no propellant; (4) Navigation of the Interplanetary Superhighway to enable multiple destinations over reasonable mission durations using achievable !V; (5) Small, highly capable instrumentation enabling acquisition of high-quality scientific and exploration information; and (6) Onboard storage and processing of raw instrument data and navigation information to enable maximum utility of uplink and downlink telecom capacity, and minimal operations staffing. The NASA Innovative Advanced Concepts (NIAC) program in 2011 selected Interplanetary CubeSats for further investigation, some results of which are reported here for Phase 1.

Staehle, Robert L.↗
NASA NTRSDate not supplied

Voltage-Controlled Differential Faraday Rotation from FMNWs and Magnetoelastic Silicone-Nickel Composites

Differential Faraday rotation has been observed from strain-Differential Faraday rotation has been observed from strain-modulated magnetoelastic membranes using millimeter-wave polarimetry at 61.25 GHz. The membranes, consisting of aligned chains of nickel micro-particles embedded in silicone rubber, were manufactured using a roll-to-roll electromagnetic processing line, mounted onto piezoelectric ceramic annuli, and immersed in externally-generated static magnetic fields. Experiments were conducted in which the membranes were periodically stretched by operating the piezoelectric crystals close to their radial resonant frequencies—thereby modulating nickel particle density as well as magnetic material properties. A customized quasi-optical apparatus was used to determine the Faraday-rotation difference between the strained and unstrained states of the magnetoelastic membranes. Possible applications that could emerge from this polymer-based technology include nonreciprocal millimeter-wave components with voltage-controlled frequency response and bio-inspired geomagnetic sensors for GPS-denied navigation. Investigations were conducted to estimate the maximum attainable differential Faraday rotation and the minimum detectable static magnetic field.

nickel↗
NASA NTRS1977

The determination of the interplanetary orbits of Vikings 1 and 2

A description is presented of the navigation-related events of the Viking Mars mission. Orbit determination system fundamentals are discussed, taking into account the trajectory models, observation models, radio data models, range considerations, optical data models, filter models, the orbit determination process, critical orbit determination inputs, and orbit determination errors. Attention is also given to questions of orbit determination strategy, orbit determination results, optical measurements processing, aspects of approach orbit determination evaluation, and the orbit determination software system.

Rourke, K. H.↗
NASA NTRS2005

The 2009 Mars Telecom Orbiter Mission

This paper provides an overview of the Mars Telecom Orbiter (MTO) mission, and is an update to the paper presented at last year’s conference. Launched in 2009, MTO will provide Mars-to-Earth relay services for NASA missions arriving at Mars between 2010 and 2020, enabling far higher science data return and lowering the telecom and operations costs for these missions. MTO carries an optical communications payload, which will demonstrate downlink bit rates from 1 Mbps up to and possibly exceeding 30 Mbps. MTO will also demonstrate the ability to autonomously navigate, and to search for and rendezvous with an orbiting sample, in preparation for NASA’s proposed Mars Sample Return Mission. A to-be-defined science instrument will also be carried.

Boroson, Don↗