Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE DIAGRAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Numerical modeling of HgCdTe solidification: Effects of phase diagram, double-diffusion convection and microgravity level

A numerical model of HgCdTe solidification was implemented using finite the element code FIDAP. Model verification was done using both experimental data and numerical test problems. The model was used to evaluate possible effects of double-diffusion convection in molten material, and microgravity level on concentration distribution in the solidified HgCdTe. Particular attention was paid to incorporation of HgCdTe phase diagram. It was found, that below a critical microgravity amplitude, the maximum convective velocity in the melt appears virtually independent on the microgravity vector orientation. Good agreement between predicted interface shape and an interface obtained experimentally by quenching was achieved. The results of numerical modeling are presented in the form of video film.

Bune, Andris V.↗

Yet again, new compounds found in systems with known binary phase diagrams. Synthesis, crystal and electronic structure of Nd 3 Bi 7 and Sm 3 Bi 7

The binary bismuthides Nd 3 Bi 7 and Sm 3 Bi 7 were synthesized and structurally characterized for the first time. Here, the results from the calorimetric analysis show that both compounds are stable only up to about 500 °C, which may explain why they were overlooked during the original assessment of the corresponding phase diagrams.

36 MATERIALS SCIENCE↗

Using first principles calculations to interpret XANES experiments: extracting the size-dependence of the ( p , T ) phase diagram of sub-nanometer Cu clusters in an O 2 environment

Here, we have used ab initio density functional theory together with ab initio atomistic thermodynamics, and in situ X-ray absorption near edge spectroscopy (XANES) experiments, to study the oxidation of sub-nanometer clusters of Cu n O x supported on a hydroxylated amorphous alumina substrate in an O 2 -rich environment. We obtain ( p , T ) phase diagrams; these differ notably for the nanoclusters compared to the bulk. Both theory and experiment suggest that in the presence of oxygen, the cluster will oxidize from its elemental state to the oxidized state as temperature decreases. We obtain a clear trend for the transition Cu n → Cu n O n/2 : we see that smaller the cluster, greater is the tendency toward oxidation. However, we do not see a monotonic size-dependent trend for the transition Cu n O n/2 → Cu n O n . We suggest that theoretically computed Bader charges constitute a simple yet quantitative way to align experimental measures of XANES edges with theoretical calculations, so as to yield oxidation states for nanoclusters. Our results have important implications for the use of small clusters in fields such as nanocatalysis and nanomedicine.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature and composition phase diagram in the iron-based ladder compounds Ba 1 - x Cs x Fe 2 Se 3

We investigated the iron-based ladder compounds (Ba,Cs)Fe₂Se₃. Their parent compounds BaFe₂Se₃ and CsFe₂Se₃ have different space groups, formal valences of Fe, and magnetic structures. Electrical resistivity, specific heat, magnetic susceptibility, x-ray diffraction, and powder neutron diffraction measurements were conducted to obtain a temperature and composition phase diagram of this system. Block magnetism observed in BaFe₂Se₃ is drastically suppressed with Cs doping. In contrast, stripe magnetism observed in CsFe₂Se₃ is not so fragile against Ba doping. A new type of magnetic structure appears in intermediate compositions, which is similar to stripe magnetism of CsFe₂Se₃, but interladder spin configuration is different. Intermediate compounds show insulating behavior, nevertheless a finite T-linear contribution in specific heat was obtained at low temperatures.

Hawai, Takafumi↗

Phase diagram for asymmetric nuclear matter in the multifragmentation model

We assume that, in equilibrium, nuclear matter at reduced density and moderate finite temperature breaks up into many fragments. Strong support for this assumption is provided by data accumulated from intermediate-energy heavy ion collisions. The breakup of hot and expanded nuclear matter according to the rules of equilibrium statistical mechanics is the multifragmentation model, which gives a first-order phase transition. This is studied in detail here. Phase-equilibrium lines for different degrees of asymmetry are computed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗

Optical/electrical correlations in ZnO. The plasmonic resonance phase diagram

The Drude equation for dielectric constant ϵ(E) depends on four parameters: ϵ∞, effective mass m*, optical mobility µopt, and optical carrier concentration nopt. By solving this equation at ϵ(Eres)=0, we obtain a relationship between µopt and nopt at constant plasmonic resonance energy Eres [or wavelength λres (µm)=1.2395/Eres (eV)]. A family of µopt versus nopt curves covering a range of λres values (including the limiting wavelength λres=∞) constitutes a plasmonic resonance phase diagram (PRPD) for a semiconductor defined by only ϵ∞ and m*. The PRPD is a convenient instrument that allows an immediate prediction of λres from Hall-effect measurements of µH and nH. We apply the PRPD analysis to a series of ten ZnO samples grown by pulsed laser deposition at 200°C in an ambient of 33%H2:67%Ar and annealed in 25°C steps for 10 min in air at various temperatures from 400 to 600°C. For the samples annealed at 550°C or lower, the µH/nH points yield predicted values of λres that range from 1.07 to 2.80 µm; however, the 575 and 600°C samples are predicted to have no resonance at all. Reflectance curves for the eight samples annealed up to 550 °C decrease slowly from 6 eV down to about Eres= 0.5–1.15 eV, and then increase rapidly for E < Eres. In contrast, there is no such resonance-related increase for the 575 and 600 °C samples. Satisfactory agreement is found between the reflectance minima and the Hall-effect-predicted values of λres.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigations on the Phase Diagram and Interaction Parameter of Poly(styrene-b-1,3-cyclohexadiene) Copolymers

A series of linear diblock copolymers containing polystyrene (PS) and poly(1,3-cyclohexadiene) (PCHD) with high 1,4-microstructure (>87%) was synthesized by anionic polymerization and high vacuum techniques. Microphase separation in the bulk was examined in this paper by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) and compared to computational analysis of the predicted morphological phase diagram for this system. Because of the high conformational asymmetry between PS and PCHD, these materials self-assemble into typical morphologies expected for linear diblock copolymer systems and atypical structures. Rheological measurements were conducted and revealed order–disorder transition temperatures (T ODT ), for the first time for PS-b-PCHD copolymers, resulting in a working expression for the effective interaction parameter χ eff = 32/T – 0.016. Furthermore, we performed computational studies that coincide with the experimental results. Finally, these copolymers exhibit well-ordered structures even at high temperatures (~260 °C) therefore providing a better insight concerning their microphase separation at the nanoscale which is important for their potential use in nanotechnology and/or nanolithography applications.

36 MATERIALS SCIENCE↗

Global quantum phase diagram and non-Abelian chiral spin liquid in a spin- 3 2 square-lattice antiferromagnet

Since strong quantum fluctuations are essential for the emergence of quantum spin liquids, there have been extensive exploration and identification of spin liquid candidates in spin-$\frac{1}{2}$ systems, while such activities are rare in higher spin systems. Here we report an example of non-Abelian chiral spin liquid emerging in a spin-$\frac{3}{2}$ Heisenberg model on a square lattice. By tuning Heisenberg exchange interaction and scalar chirality interaction, we map out a quantum phase diagram enclosing three conventional magnetic orders and a chiral spin liquid based on density-matrix renormalization group studies. The nature of the spin liquid is identified as a long-sought bosonic version of the Read-Rezayi state that supports non-Abelian Fibonacci anyonic statistics, identified by the ground state entanglement spectrum. Significantly, we establish that the non-Abelian chiral spin liquid emerges through the enlarged local degrees of freedom and enhanced quantum fluctuations near the classical phase boundaries of competing magnetic orders. Finally, our numerical discovery of an exotic quantum spin liquid in a spin-$\frac{3}{2}$ system suggests a route for discovering fractionalized quantum phases in frustrated higher spin magnetic compounds.

2-dimensional systems↗

Phase diagrams and microstructures of aqueous short alkyl chain polyethylene glycol ether carboxylate and carboxylic acid triblock surfactant solutions

The surfactant C 8 Eo 8 CH 2 COOH (Akypo LF2) and its salts have a small hydrophobic and a significantly longer hydrophilic part. As a consequence, there must be a significant steric constraint, once these surfactant molecules form micelles. In addition, the partially charged headgroups should bring some additional fine-tuning via electrostatic interactions to this "essentially non-ionic" surfactant. Experiments: Phase diagrams of binary mixtures of water and C 8 Eo 8 CH 2 COOH are established over large concentration and temperature ranges, also at different pHs and in the presence of sodium and calcium ions. Surface tensions and osmotic pressures are measured to understand the systems. To evaluate the microstructures, also Dynamic Light Scattering and Small-Angle X-ray Scattering are performed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Modeling of HgCdTe Solidification: Effects of Phase Diagram, Double-Diffusion Convection and Microgravity Level

Melt convection, along with species diffusion and segregation on the solidification interface are the primary factors responsible for species redistribution during HgCdTe crystal growth from the melt. As no direct information about convection velocity is available, numerical modeling is a logical approach to estimate convection. Furthermore influence of microgravity level, double-diffusion and material properties should be taken into account. In the present study, HgCdTe is considered as a binary alloy with melting temperature available from a phase diagram. The numerical model of convection and solidification of binary alloy is based on the general equations of heat and mass transfer in two-dimensional region. Mathematical modeling of binary alloy solidification is still a challenging numericial problem. A Rigorous mathematical approach to this problem is available only when convection is not considered at all. The proposed numerical model was developed using the finite element code FIDAP. In the present study, the numerical model is used to consider thermal, solutal convection and a double diffusion source of mass transport.

Bune, Andris V.↗

Phase Diagram of the Two-Chain Hubbard Model

We have calculated the charge gap and spin gap for the two-chain Hubbard model as a function of the on-site Coulomb interaction and the interchain hopping amplitude. We used the density matrix renormalization group method and developed a method to calculate separately the gaps numerically for the symmetric and antisymmetric modes with respect to the exchange of the chain indices. We have found very different behaviors for the weak and strong interaction cases. Our calculated phase diagram is compared to the one obtained by Balents and Fisher using the weak coupling renormalization group technique.

Park, Youngho↗

Oxygen stoichiometry: A key parameter to tune structural phase diagram of La{sub 0.2}Sr{sub 0.8}MnO{sub 3-δ}

Low temperature x-ray powder diffraction studies, in conjunction with transmission electron microscopy on stoichiometric (δ = 0.01) and oxygen deficient (δ =0.12) samples of La{sub 0.2}Sr{sub 0.8}MnO{sub 3-δ} manganites have been carried out. These studies revealed that oxygen stoichiometry plays a key role in controlling ground state of electron doped manganites. It is observed that the La{sub 0.2}Sr{sub 0.8}MnO{sub 2.99} undergoes a first order phase transition from cubic (Pm-3m) to JT-distorted twin tetragonal (I4/mcm) phase associated with C-type antiferromagnetic ordering at ∼260K. This JT-distortion induced cubic to tetragonal phase transition get totally suppressed in La{sub 0.2}Sr{sub 0.8}MnO{sub 2.88}. The basic perovskite lattice of the off-stoichiometric La{sub 0.2}Sr{sub 0.8}MnO{sub 2.88} remains cubic down to 80K but undergoes a well-developed charge-ordering transition with 9x9 modulations at ∼260K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comprehensive magnetic phase diagrams of the polar metal Ca 3 (Ru 0.95 Fe 0.05 ) 2 O 7

Polar metals exist as a rather unique class of materials as they combine two seemingly mutually exclusive properties (polar order and metallicity) in one system. So far only a few polar metals have been unambiguously identified; the magnetic ones are exceptionally rare. Here we investigate a 5% Fe-doped polar metal Ca 3 Ru 2 O 7 , via electrical transport, magnetization, microstrain, and optical second-harmonic generation measurements. We report the full magnetic phase diagrams (in the field-temperature space) for magnetic field H∥a and H∥b, which exhibit distinct field-dependent magnetizations behavior. In particular, for H∥a we found a ferromagnetic incommensurate spin structure, which is absent in the pure Ca 3 Ru 2 O 7 . Furthermore, we propose a microscopic spin model to understand this behavior, highlighting the role of Fe doping in tipping the delicate balance of the underlying exchange-interaction energy in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Diagram of Nuclear Pastas in Neutron Star Crusts

Two neural networks were trained to predict, respectively, the Euler characteristic and the curvature of nuclear pastas in neutron star crust conditions generated by molecular dynamics simulations of neutron star matter with 0.1 < x < 0.5, 0.040 fm−3 < ρ < 0.085 fm−3 (0.68 × 1014 g/cm3 < ρ < 1.43 × 1014 g/cm3), and 0.2 MeV < T < 4.0 MeV, where x is proton content, the density is ρ, and the temperature is T. The predictions of the two networks were combined to determine the nuclear pasta phase that is thermodynamically stable at a given x, ρ, and T, and a three-dimensional phase diagram that extrapolated slightly the regions of existing molecular dynamics data was computed. The jungle gym and anti-jungle gym structures are prevalent at high temperature and low density, while the anti-jungle gym and anti-gnocchi structures dominate at high temperature and high density. A diversity of structures exist at low temperatures and intermediate density and proton content. The trained models used in this work are open access and available at a public repository to promote comparison to pastas obtained with other models.

Muñoz, Jorge A. (ORCID:0000000294870079)↗

Aging and Lifetimes Program Annual Report - Part I: Update to BDNPA-BDNPF phase diagram (FY2022)

The eutectic mixture nitroplasticizer (NP) contains water, without exception, on the order of hundreds to thousands of parts per million depending on the exposure conditions. Therefore, to evaluate the properties of NP, one must consider that NP is not simply comprised of two constituents. Here we supplement previous work on the physical properties of NP (Edgar et al., 2020) by expanding on the experimental work therein and addressing inaccuracies detailed in a subsequent comment article (Brown, 2021). Specifically, the purpose of this work is to clarify and modify the phase diagram of the bis(2,2-dinitropropyl) acetal with bis(2,2-dinitropropyl) formal eutectic mixture by considering the effect of water concentrations on the nucleation process.

36 MATERIALS SCIENCE↗

High-pressure phase diagram of beryllium from ab initio free-energy calculations

In this report we use first-principles molecular dynamics simulations coupled with the thermodynamic integration method to study the hexagonal close-packed (hcp) to body-centered cubic (bcc) transition and melting of beryllium up to a pressure of 1600 GPa. We derive the melting line by equating solid and liquid Gibbs free energies and represent it by a Simon-Glatzel fit T m = 1564 K [1 + P/(15.6032 GPa)] 0.383 , which is in good agreement with previous two-phase simulations <6000 K. We also derive the hcp-bcc solid-solid phase boundary and show that the quasiharmonic approximation underestimates the stability of the hcp structure, predicting lower transition pressures between hcp and bcc phases. Our results are consistent with the stability regime predicted by the phonon quasiparticle method. We also predict that the hcp-bcc-liquid triple point is located at 164.7 GPa and 4314 K. In addition, we compute the shock Hugoniot curve and show that it is in good agreement with experiments, intersecting our derived melting curve at ~235 GPa and 4900 K. Finally, we make predictions for future ramp compression experiments. Starting with an isentropic compression of the liquid, we predict the path to intersect the melting line at low pressure and temperature, then to continue along the melting line over a large temperature interval of 7000 K as the sample remains in the mixed solid-liquid state before it enters the solid phase.

36 MATERIALS SCIENCE↗

Topological phase diagram and saddle point singularity in a tunable topological crystalline insulator

Here we report the evolution of the surface electronic structure and surface material properties of a topological crystalline insulator (TCI), Pb 1${-}$x SnxSe, as a function of various material parameters including composition x, temperature T , and crystal structure. Our spectroscopic data demonstrate the electronic ground-state condition for the saddle point singularity, the tunability of surface chemical potential, and the surface states’ response to circularly polarized light. Our results show that each material parameter can tune the system between the trivial and topological phase in a distinct way, unlike that seen in Bi 2 Se 3 and related compounds, leading to a rich topological phase diagram. Our systematic studies of the TCI Pb 1${-}$x SnxSe are a valuable materials guide to realize new topological phenomena.

36 MATERIALS SCIENCE↗