Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FLUX MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Using Beta Cen to Probe the Photosphere-wind Connection in B Stars

In this project we began by identifying the large number of emission lines visible in the XMM-Newton RGS spectra of Beta Cen. A comprehensive analysis of the temperature structure of the hot gas was carried out by simultaneously fitting the data from all the instruments on the spacecraft. This resulted in a measured temperature range of 0.1-0.6 keV. In more detailed analysis, three characteristic plasma temperatures were found: 0.1, 0.2, and 0.6 keV. The research carried out at UW-Eau Claire primarily focused on two aspects of the data: the analysis of the forbidden line to intercombination line ratio for He-like ions and the time variability of the overall X-ray flux as detected in the direct X-ray images of the star. The analysis of the lines from He-like ions indicate that the Ne IX lines are formed no farther than about 4 stellar radii from the star's photosphere, while the N VI lines are formed within 11 stellar radii of the photosphere. X-ray flux variability would be particularly interesting for this star because it is a known Beta Cep-type variable as seen in optical light: similar variation in the X-ray region would forge an interesting link between the two wavebands. Initial analysis of the X-ray flux was complicated by spikes in the count rates early in the observation. Detailed analysis of the spectral characteristics these count rate anomalies indicated that these flares were probably not intrinsic to the star, rather they were contaminations of the data due to the passage of the satellite through soft proton clouds in the Earth's magnetosphere. An analysis of the light curve of the uncontaminated portions of the light curve did not reveal any variation on the known optical period of variation for this star, and a general search for periodic variability also did not find any significant periods of variation.

Miller, Nathan A.↗

Hot plasma composition results from the S3-3 spacecraft

The S3-3 satellite discovered the principal auroral acceleration region at altitudes of about 1 R(E) over the auroral zone. Intense fluxes of upward flowing O(+) and H(+) ions with keV energies were commonly observed in this region of the magnetosphere. The detailed morphology of these upflowing ions is described, including their latitude, local time, altitude, and magnetic activity dependences and their relationship to the trapped keV electron population. The first measurements of the composition of the trapped keV ions in the radiation belts are also described, showing the importance of the ionospheric source term to the storm time population of ions with energies equal to or less than 16 keV/e.

Sharp, R. D.↗

Measured electron contribution to Shuttle plasma environment: Abbreviated update

The differential energy spectra of electrons between 1 and 100 eV were measured by an electron spectrometer flown on an early shuttle. This energy range was scanned in 64 incremental steps with a resolution of 7%. The most striking feature that was observed throughout these spectra was a relatively flat distribution of the higher energy electrons out to 100 eV. This is in contrast to normal ambient spectra which consistently show a rapid decline in quantitative flux beyond 50 to 55 eV. The lower energy (1 to 2 eV) end of these spectra showed steep thermal trails comparable to normal ambient spectral structure. In general, daytime fluxes were significantly higher than those obtained during nighttime measurements. Quantitative flux excursions which may possibly be associated with thruster firing were frequently observed. Spectral structure suggestive of the N2 vibrational excitation energy loss mechanism was also seen in the data from some measurement periods. Examples of these spectra are shown and possible correlations are discussed.

Mcmahon, W.↗

Initial PVO evidence of electron depletion signatures downstream of Venus

This first analysis of Pioneer Venus Orbiter (PVO) plasma analyzer electron measurements obtained in early 1992 during teh PVO entry phase of the mission indicates the presence downstream from the terminator of a depletion or 'bite out' of energetic ionosheath electrons similar to that observed on Mariner 10. There is more than one possible explanation for this energetic electron depletion. If it is due to atmospheric scattering, the electrons traveling along draped magnetic flux tubes that thread through the Venus neutral atmosphere would lose energy from impact ionization with oxygen. The cross-section for such electron impact ionization of oxygen has a peak near 100 eV, and it remains high above this energy, so atmospheric loss could provde a natural process for electrons at these energies to be selectively removed. In this case, our results are consistent with the Kar et al. (1994) study of PVO atmospheric entry ion mass spectrometer data, which indicates that electron impact plays a significant role in maintaining the nightside ionosphere. Although it is appealing to interpret the energetic electron depletion in terms of direct atmospheric scattering, alternatively it could result from strong draping which connects the depletion region magnetically to the weak downstream bow shock and thereby reduces the electron source strength.

Intriligator, D. S.↗

Magnetic clouds, helicity conservation, and intrinsic scale flux ropes

An intrinsic-scale flux-rope model for interplanetary magnetic clouds, incorporating conservation of magnetic helicity, flux and mass is found to adequately explain clouds' average thermodynamic and magnetic properties. In spite their continuous expansion as they balloon into interplanetary space, magnetic clouds maintain high temperatures. This is shown to be due to magnetic energy dissipation. The temperature of an expanding cloud is shown to pass through a maximum above its starting temperature if the initial plasma beta in the cloud is less than 2/3. Excess magnetic pressure inside the cloud is not an important driver of the expansion as it is almost balanced by the tension in the helical field lines. It is conservation of magnetic helicity and flux that requires that clouds expand radially as they move away from the Sun. Comparison with published data shows good agreement between measured cloud properties and theory. Parameters determined from theoretical fits to the data, when extended back to the Sun, are consistent with the origin of interplanetary magnetic clouds in solar filament eruptions. A possible extension of the heating mechanism discussed here to heating of the solar corona is discussed.

Kumar, A.↗

Initial PVO Evidence of Electron Depletion Signatures Downstream of Venus

This first analysis of Pioneer Venus Orbiter (PVO) plasma analyzer electron measurements obtained in early 1992 during the PVO entry phase of the mission indicates the presence downstream from the terminator of a depletion or "bite out" of energetic ionosheath electrons similar to that observed on Mariner 10. There is more than one possible explanation for this energetic electron depletion. If it is due to atmospheric scattering, the electrons traveling along draped magnetic flux tubes that thread through the Venus neutral atmosphere would lose energy from impact ionization with oxygen. The cross-section for such electron impact ionization of oxygen has a peak near 100 eV, and it remains high above this energy, so atmospheric loss could provide a natural process for electrons at these energies to be selectively removed. In this case, our results are consistent with the Kar et al. (1994) study of PVO atmospheric entry ion mass spectrometer data which indicates that electron impact plays a significant role in maintaining the nightside ionosphere. Although it is appealing to interpret the energetic electron depletion in terms of direct atmospheric scattering, alternatively it could result from strong draping which connects the depletion region magnetically to the weak downstream bow shock and thereby reduces the electron source strength.

Intriligator, D. S.↗

A possible energy source to power stable auroral red arcs - Precipitating electrons

Results of coincident measurements by ground-based photometers and the low-altitude plasma instrument on board the Dynamics Explorer 2 satellite are presented that demonstrate the association of precipitating low-energy electrons with stable auroral red (SAR) arcs. A search of available data has yielded 23 instances of DE 2 overflights during the presence of SAR arcs being monitored by the photometers. For each case, downward fluxes of electrons are found to be enhanced along field lines penetrating the arcs in relation to regions both north and south of the features. Modeling of the atmospheric response to these influxes indicates that these electrons can represent a major source of the energy required to establish temperature profiles within the ionospheric electron gas that are sufficient to produce the recorded 6300-A emission rates. The sensitivity of these results to uncertainties of the assumed spacecraft potential and thermospheric composition has been investigated and found to be important, but does not alter the conclusion that precipitating electrons are a fundamental link in the production of SAR arcs.

Slater, D. W.↗

Voyager 2 plasma ion observations in the magnetosphere of Uranus

Positive ion measurements in the magnetosphere of Uranus have been made by the Voyager 2 plasma science experiment. The paper presents an overview of the entire data set and a detailed analysis of the observations from the inner magnetosphere which complements and extends results reported elsewhere. Densities and temperatures are obtained from an analysis which incorporates details of the instrumental response. These results are then used to calculate flux tube particle and energy content to support the hypothesis that the plasma transport is controlled by a solar wind-driven magnetospheric convection system. Variations in the flux tube content suggest both a local source of plasma, produced from the neutral hydrogen corona of Uranus, and a nonlocal source, convected inwared and heated by adiabatic compression. In each case a proton composition is inferred. Sharp boundaries in the high-energy (approximately 1 keV) plasma population are interpreted in terms of the spatial extent of the magnetospheric convection, with significant shielding of the convection electric field. The convection theory is also used in a simulation of the low-energy (approximately 10 eV) ion component using the neutral hydrogen source, resulting in distribution functions which qualitatively agree with the observations.

Selesnick, Richard S.↗

Quantitative Examination of a Large Sample of Supra-Arcade Downflows in Eruptive Solar Flares

Sunward-flowing voids above post-coronal mass ejection flare arcades were first discovered using the soft X-ray telescope aboard Yohkoh and have since been observed with TRACE (extreme ultraviolet (EUV)), SOHO/LASCO (white light), SOHO/SUMER (EUV spectra), and Hinode/XRT (soft X-rays). Supra-arcade downflow (SAD) observations suggest that they are the cross-sections of thin flux tubes retracting from a reconnection site high in the corona. Supra-arcade downflowing loops (SADLs) have also been observed under similar circumstances and are theorized to be SADs viewed from a perpendicular angle. Although previous studies have focused on dark flows because they are easier to detect and complementary spectral data analysis reveals their magnetic nature, the signal intensity of the flows actually ranges from dark to bright. This implies that newly reconnected coronal loops can contain a range of hot plasma density. Previous studies have presented detailed SAD observations for a small number of flares. In this paper, we present a substantial SADs and SADLs flare catalog. We have applied semiautomatic detection software to several of these events to detect and track individual downflows thereby providing statistically significant samples of parameters such as velocity, acceleration, area, magnetic flux, shrinkage energy, and reconnection rate. We discuss these measurements (particularly the unexpected result of the speeds being an order of magnitude slower than the assumed Alfven speed), how they were obtained, and potential impact on reconnection models.

Savage, Sabrina L.↗

Anisotropy of the energetic neutral atom flux in the heliosphere

Characteristics of the energetic neutral atoms born at the heliospheric interface are considered for plasma flow structure resulting from a two-shock model of the interaction between the solar wind and the interstellar medium. The energy distributions of heliospheric energetic neutral atoms (HELENAs) are calculated and it is shown that the HELENA flux is highly anisotropic at the earth's orbit. The characteristics of the HELENA flux are highly sensitive to the size of the heliosphere. This supports the conclusion that measurements of HELENAs from the earth's orbit would provide an efficient tool to remotely study the heliosphere.

Gruntman, Michael A.↗

Latitudinal Dependence of the Radial IMF Component: Coronal Imprint

Measurements by Ulysses have confirmed that there is no significant gradient with respect to heliomagnetic latitude in the radial component, B(sub r,) of the interplanetary magnetic field. In the corona, the plasma, beta is much less than 1, except directly above streamers, so longitudinal and latitudinal gradients in field strength will relax due to the transverse magnetic pressure gradient force as the solar wind carries magnetic flux away from the Sun. This happens quickly enough so that the field is essentially uniform by 5 - 10 solar radius, apparently remaining so as it is carried to beyond 1 AU. Here, we illustrate the coronal relaxation with a qualitative physical argument and by reference to a detailed Magneto HydroDynamics (MHD) simulation.

Suess, S. T.↗

Thermal modelling of various thermal barrier coatings in a high heat flux rocket engine

Traditional Air Plasma Sprayed (APS) ZrO2-Y2O3 Thermal Barrier Coatings (TBC's) and Low Pressure Plasma Sprayed (LPPS) ZrO2-Y2O3/Ni-Cr-Al-Y cermet coatings were tested in a H2/O2 rocked engine. The traditional ZrO2-Y2O3 (TBC's) showed considerable metal temperature reductions during testing in the hydrogen-rich environment. A thermal model was developed to predict the thermal response of the tubes with the various coatings. Good agreement was observed between predicted temperatures and measured temperatures at the inner wall of the tube and in the metal near the coating/metal interface. The thermal model was also used to examine the effect of the differences in the reported values of the thermal conductivity of plasma sprayed ZrO2-Y2O3 ceramic coatings, the effect of 100 micron (0.004 in.) thick metallic bond coat, the effect of tangential heat transfer around the tube, and the effect or radiation from the surface of the ceramic coating. It was shown that for the short duration testing in the rocket engine, the most important of these considerations was the effect of the uncertainty in the thermal conductivity of temperatures (greater than 100 C) predicted in the tube. The thermal model was also used to predict the thermal response of the coated rod in order to quantify the difference in the metal temperatures between the two substrate geometries and to explain the previously-observed increased life of coatings on rods over that on tubes. A thermal model was also developed to predict heat transfer to the leading edge of High Pressure Fuel Turbopump (HPFTP) blades during start-up of the space shuttle main engines. The ability of various TBC's to reduce metal temperatures during the two thermal excursions occurring on start-up was predicted. Temperature reductions of 150 to 470 C were predicted for 165 micron (0.0065 in.) coatings for the greater of the two thermal excursions.

Nesbitt, James A.↗

Double vision: Remote sensing of a flux transfer event with ISEE 1 and 2

A flux transfer event recorded by the International Sun-Earth Explorers (ISEE) 1 and 2 spacecraft in the northern hemisphere near local noon is examined using analysis techniques developed recently for determination from single satellite magnetometer data of the orientation and cross-sectional shape of a two-dimensional disturbance moving along the magnetopause. The analysis is performed independently on the magnetic field data recorded by each satellite, enabling us to check the consistency of the results and thus to benchmark the method. The analysis is also extended to utilize the dual magnetometer measurements for determination of the event speed and size (which for a single spacecraft requires use of three-dimensional plasma velocity data to obtain a deHoffmann-Teller frame velocity) and for accommodating acceleration of the magnetopause normal to itself, which results in a curved spacecraft trajectory in the frame of reference moving with the disturbance. The analysis of the disturbance reveals that while its overall size is about 34,000 km in a direction parallel to the magnetopause but perpendicular to the event axis, the actual size of the bulge causing the field disturbance may have been as small as 9000 km with a dimension perpendicular to the magnetopause of the order of 1200 km. The bulge is found to be traveling at a speed of about 140 km/s toward the northern dawn quadrant of the dayside magnetopause. While plasma data from ISEE 2 provides evidence of plasma jetting, which suggests the event may be associated with reconnection, the orientation of the flux tube axis obtained from analysis is significantly different from the expected reconnection line direction. A discussion of possible interpretations of this bulge orientation and motion is provided.

Walthour, D. W.↗

Detection of Jovian whistler mode chorus - Implications for the Io torus aurora

Near the Io torus outer boundary (L of about 8), the Voyager 1 plasma wave instrument detected high frequency (f) waves near one-half the electron cyclotron frequency fc. High resolution waveform measurements demonstrate that these signals (f approximately equal to fc/2) are banded whistler mode chorus at f not greater than fc/2 and half-cyclotron frequency emissions with f slightly above fc/2. The density (about 2.5 per cu cm), the energy (a few keV), and the omnidirectional energy flux (100 ergs/sq cm-sec), of the electrons resonant with the chorus were determined.

Coroniti, F. V.↗

Venus internal magnetic field and its interaction with the interplanetary magnetic field

In a previous study, Knudsen et al. suggested that Venus has a weak internal magnetic dipole field of the order of 7 x 10 + 20 G cm(exp -3) that is manifested in the form of magnetic flux tubes threading the ionospheric holes in the Venus nightside ionosphere. They pointed out that any internal field of Venus, dipole or multipole, would be weakened in the subsolar region and concentrated in the antisolar region of the planet by the supersonic transterminator convection of the dayside ionosphere into the nightside hemisphere. The inferred magnitude of the dipole field does not violate the upper limit for an internal magnetic field established by the Pioneer Venus magnetometer experiment. The most compelling objection to the model suggested by Knudsen et al. has been the fact that it does not explain the observed interplanetary magnetic field (IMF) control of the polarity of the ionospheric hole flux tubes. In this presentation I suggest that a magnetic reconnection process analogous to that occurring at earth is occurring at Venus between the IMF and a weak internal dipole field. At Venus in the subsolar region, the reconnection occurs within the ionosphere. At Earth it occurs at the magnetopause. Reconnection will occur only when the IMF has an appropriate orientation relative to that of the weak internal field. Thus, reconnection provides a process for the IMF to control the flux tube polarity. The reconnection in the subsolar region takes place in the ionosphere as the barrier magnetic field is transported downward into the lower ionosphere by downward convection of ionospheric plasma and approaches the oppositely directed internal magnetic field that is diffusing upward. The reconnected flux tubes are then transported anti-Sunward by the anti-Sunward convecting ionospheric plasma as well as by the anti-Sunward-flowing solar wind. Reconnection will also occur in the Venus magnetic tail region, somewhat analogously to the reconnection that occurs in the magnetotail of the Earth. The possibility that reconnection is occurring between the IMF and an internal dipole field may be tested by measuring the orientation of the IMF projected into a plane perpendicular to the solar wind velocity during time intervals for which ionospheric holes are observed. The orientations of the IMV components should fall within a 180 deg angle.

Knudsen, W. C.↗

The nightward ion flow scenario at Venus revisited

We indicate how existing Pioneer Venus Orbiter (PVO) data might be used to gain a better understanding of nightward ion flow in the Venusian ionosphere. Calculations based on PVO measurements made at solar maximum suggest that the global nightward flow of O(+) may be signifcantly greater than is required to maintain the observed nightside ionosphere densities. The validity of this conclusion depends upon (1) the accuracy with which the flow can be determined from the PVO ion density and velocity measurements and (2) the validity of the ionosphere theory used to estimate the required downward O(+) flux on the night side. If the measurements and theory are assumed to be accurate, the excess nightward flow implies a significant rate of ion escape from the planet, particularly at times of low solar wind dynamic pressure, Psw, when the ionopause rises to allow increased nightward flow. To illustrate a potentially important mechanism for ion escape from Venus, we present Orbiter Electron Temperature Probe (OETP) observations of plasma clouds and scavenged ionospheric plasma observed above the ionopause. We then employ OETP and Orbiter Retarding Potential Analyzer (ORPA) data to reexamine the global ion flow for average Psw conditions.

Brace, L. H.↗

Multispacecraft Observations and Modeling of the 22/23 June 2015 Geomagnetic Storm

The magnetic storm of 22-23 June 2015 was one of the largest in the current solar cycle. We present in situ observations from the Magnetospheric Multiscale Mission (MMS) and the Van Allen Probes (VAP) in the magnetotail, field-aligned currents from AMPERE (Active Magnetosphere and Planetary Electrodynamics Response), and ionospheric flow data from Defense Meteorological Satellite Program (DMSP). Our real-time space weather alert system sent out a "red alert," correctly predicting Kp indices greater than 8. We show strong outflow of ionospheric oxygen, dipolarizations in the MMS magnetometer data, and dropouts in the particle fluxes seen by the MMS Fast Plasma Instrument suite. At ionospheric altitudes, the AMPERE data show highly variable currents exceeding 20 MA. We present numerical simulations with the Block Adaptive Tree-Solarwind - Roe - Upwind Scheme (BATS-R-US) global magnetohydrodynamic model linked with the Rice Convection Model. The model predicted the magnitude of the dipolarizations, and varying polar cap convection patterns, which were confirmed by DMSP measurements.

Reiff, P. H.↗

Pyrolysis Rate and Yield Strength Reduction Incarbon Fiber and Glass Fiber Composites Underreentry Heating Conditions

The behavior of composite materials, specifically carbon fiber reinforced plastic (CFRP) and glass fiber reinforced plastic (GFRP), under reentry conditions poses a problem for space debris reentry risk modeling. Since these materials pyrolyze rather than melt and their different components demise at different rates, modeling their destruction to determine ground impact risk is complex. Modern spacecraft are using these materials in ever-greater quantities owing to their superior strength-to-weight characteristics, and this has required that the orbital debris community improve its understanding of how these materials demise on reentry. The NASA Orbital Debris Program Office undertook an extensive test campaign to better understand the rate at which several types of GFRP and CFRP materials pyrolyze under reentry heating conditions and how that pyrolysis affects the ultimate strength of the material. GFRP with a polyester resin (G10/FR-4) and CFRP with epoxy, cyanate ester, vinyl ester, and phenolic resins were tested. The test campaign was carried out at the Inductively Coupled Plasma (ICP) Torch Facility at the University of Texas at Austin. Because the ICP facility operates in a shirt-sleeve environment, test samples can be changed within seconds or minutes, allowing many samples to be tested in a short period. Two heat flux rates, 20 W/m2 and 30W/m2, and two oxygen concentration conditions, 0% and 2% of atmospheric, were applied to all five types of material. To measure both the char rate and the effect of pyrolysis on the ultimate material strength, two types of test were carried out for each material: a char rate test on a ~10 mm thick sample of material and an in-situ bending stress test of a ~2 mm thick sample of material. Measurements of the char rate showed very similar average pyrolysis front velocity in epoxy resin CFRP as in G10 at 3.6 mm/min and 3.4 mm/min, respectively. However, the total mass loss rate in theG10 was nearly double that of the CFRP at 3.8 g/min and 2.2 g/min, respectively. This result represented a slow ablation rate of carbon fibers in the CFRP at the temperatures encountered in low Earth orbit reentry and a comparatively rapid removal of the glass fibers in G10 due to melting and spallation. Pyrolysis front velocity was more significantly affected by the type of plastic than the type of fiber, with the cyanate ester CFRP samples displaying an average pyrolysis front velocity of only 1.9 mm/min. Similarly, the effect of thermal exposure on the ultimate strength of the material depended heavily on the type of plastic and very little on the type of fiber in the material. Epoxy, vinyl ester, and polyester resins all behaved very similarly, with complete structural failure at between 400 J/g and 600 J/g of specific absorbed heat. Phenolic and cyanate ester resins, on the other hand, displayed a change in structural properties that was only barely measurable with the current apparatus even after the maximum exposure time tested. These data are being incorporated into a numerical model of the ablation and demise of composite materials that will be used to more accurately calculate the ground casualty risk of future spacecraft.

Benton R. Greene↗