Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FOCUS DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Quantum-Classical Science for the Plasma-Material Interface in NSTXU (Final Technical Report)

Plasma facing surfaces (PFS) have a profound influence on plasma performance and choice of material for PFSs is a burning issue for tokamak reactors. Using lithium wall conditioning in NSTX has resulted in a beneficial influence on plasma behavior including control of hydrogen recycling and improvements in energy confinement, longer confinement times, edge density control, and the elimination of Edge Localized Modes. A major challenge for the NSTX-U (increased power flux, increased campaign time) as well as for other magnetic fusion devices is to extend high-performance plasmas for very long durations, and to integrate this high performance with plasma facing components (PFCs) that can withstand very high heat and particle fluxes while maintaining structural integrity with minimal retention of fusion fuel. This project directly contributed to filling up the knowledge gaps and data for the dynamics of the plasma-facing interfaces in the NSTX-U at nano and nano-to-micro scales. This was achieved by both deciphering the poorly understood nanoscale phenomenology of plasma-surface interactions and providing the connection and comparison with the experiments which provide understanding at the mesoscopic scales. We modelled the dynamic response and evolution of a mixed material surfaces (D, Li, C, B, O) to bombardment by plasma particles, and investigated microstructure changes, erosion, surface chemistry, deuterium implantation and permeation. The main objectives of the project are i) a comparison of Li and B effects when deposited on carbon, and ii) the role of oxygen and other impurities (e.g. carbon, boron) in the lithium performance. In addition to predicting and understanding the phenomenology of the processes, the project achieved deliverables on the i) plasma induced erosion rates of PFCs (outer wall, divertor, etc.), including chemical and physical sputtering yields at various temperatures (300-700K), ii) deuterium uptake/recycling rates, and iii) accurate probability rates for the processes and reactions in i-ii which were used to understand the experimental results of the J.P. Allain and B. Koel NSTX-U projects. Lithium was a distinctive focus of the project. It easily charges in contact with other fusion material atoms, giving partially or fully its external electron cloud to other atoms in its vicinity and polarizing the mixed material. Our research strategy used experimentally validated multiscale theory applied to the large, multicomponent material surface systems. With the use of US supercomputing facilities we simulated evolution of atomic charges, chemistry, retention of deuterium, sputtering and morphology by introducing the corrections to the classical molecular dynamics, like are electronegativity equalization method (EEM) and quantum-classical molecular dynamics (QCMD). The goal was to understand and quantify the dynamics of the creation and evolution of the plasma-material interface under irradiation by atoms and molecules at boronized carbon, lithiated carbon, and boronized-lithiated carbon for both solid and self-healing liquid-metal divertor.

36 MATERIALS SCIENCE↗

Digitizing and Enhancing Accessibility of the Fusion Safety Archives

This project focuses on the digitization and public accessibility to the Fusion Safety Archives at the Idaho National Laboratory. The first phase involves a thorough review of each document in the physical archives to determine its online availability. For documents that are available online, PDF copies and unique identifiers are collected for database integration. Documents not available online are delivered to Red Inc. for digitization. Additionally, defunct storage devices such as diskettes are sent to INL’s archival department for data retrieval where possible. The second phase of the project involves the creation of a comprehensive database to house the digital copies of the archives. The database will facilitate easy access and management of the digitized documents. Following the database creation, we plan to train a Retrieval-Augmented Generation (RAG) based AI on publicly available documents. The trained AI will be integrated into a front-facing application, allowing the public to easily access information from the Fusion Safety Archives. This project aims to preserve valuable historical data, improve accessibility, and promote transparency in fusion safety research.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An experimental investigation of bending wave instability modes in a generic four-vortex wake

An experimental study of a planar wake consisting of four vortices that simulate the trailing vortex wakes generated by transport airplanes in either takeoff or landing configurations is presented. The objective of this study was to examine naturally occurring wake instabilities. Specifically, the focus of the study was centered on bending wave instabilities of which the Crow instability represents a particular case. A unique method of generating a four-vortex wake was developed for this study. The four-vortex wake generating device permitted direct variation of the spacing between vortices as well as control over the vortex circulation strength. Two quantitative flow visualization experiments were instrumental in identifying wake configurations that were conducive to the rapid growth of bending wave modes and in the identification of the long-wavelength mode. Detailed experiments were also conducted to examine the flow structure in the near-field or roll-up region using a four sensor, hot-wire probe that could measure all three velocity components in the wake simultaneously. The results of both the flow visualization and hot-wire experiments indicate that the long-wavelength mode and the first short-wavelength mode likely dominate the far-field wake physics and may potentially be utilized in a wake control strategy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron cyclotron current drive in low collisionality limit: On parallel momentum conservation

A comprehensive treatment of the models used in ray- and beam-tracing codes to calculate the electron cyclotron current drive (ECCD) by means of the adjoint technique, based on the adjoint properties of the collision and Vlasov operators appearing in the drift-kinetic equation, is presented. Particular attention is focused on carefully solving the adjoint drift-kinetic equation (generalized Spitzer problem) with parallel momentum conservation in the like-particle collisions. The formulation of the problem is valid for an arbitrary magnetic configuration. Only the limit of low collisionality is considered here, which is of relevance for high-temperature plasmas. It is shown that the accurate solution of the adjoint drift-kinetic equation with parallel momentum conservation significantly differs (apart from the suprathermal electron portion) from that calculated in the high-speed-limit, which is most commonly used in the literature. For high-temperature plasmas with significant relativistic effects, the accuracy of the resulting numerical models is demonstrated by ray-tracing calculations and benchmark results are presented. It is found that the ECCD efficiency calculated for ITER with parallel momentum conservation significantly exceeds the predictions obtained with the high-speed-limit model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic layer deposition TiO 2 -Al 2 O 3 stack: An improved gate dielectric on Ga-polar GaN metal oxide semiconductor capacitors

This research focuses on the benefits and properties of TiO 2 -Al 2 O 3 nano-stack thin films deposited on Ga 2 O 3 /GaN by plasma-assisted atomic layer deposition (PA-ALD) for gate dielectric development. This combination of materials achieved a high dielectric constant, a low leakage current, and a low interface trap density. Correlations were sought between the films’ structure, composition, and electrical properties. The gate dielectrics were approximately 15 nm thick and contained 5.1 nm TiO 2 , 7.1 nm Al 2 O 3 and 2 nm Ga 2 O 3 as determined by spectroscopic ellipsometry. The interface carbon concentration, as measured by x-ray photoelectron spectroscopy (XPS) depth profile, was negligible for GaN pretreated by thermal oxidation in O 2 for 30 minutes at 850°C. The RMS roughness slightly increased after thermal oxidation and remained the same after ALD of the nano-stack, as determined by atomic force microscopy. The dielectric constant of TiO 2 -Al 2 O 3 on Ga2O3/GaN was increased to 12.5 compared to that of pure Al 2 O 3 (8~9) on GaN. In addition, the nano-stack's capacitance-voltage (C-V) hysteresis was small, with a total trap density of 8.74 × 10 11 cm -2 . The gate leakage current density (J=2.81× 10 -8 A/cm 2 ) was low at +1 V gate bias. These results demonstrate the promising potential of plasma ALD deposited TiO 2 /Al 2 O 3 for serving as the gate oxide on Ga 2 O 3 /GaN based MOS devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Technical Report for Grant No. DE-FC02-01ER54648, SciDAC Center for Simulation of Wave-Plasma Interactions

Harnessing the energy that is released in fusion reactions would provide a safe and abundant source of power to meet the growing energy needs of the world population. The next step toward the development of fusion as a practical energy source is the construction of ITER, a device capable of producing and controlling the high performance plasma required for self-sustaining fusion reactions, or “burning” plasma. The input power required to drive the ITER plasma into the burning regime will be supplied primarily with a combination of external power from radio frequency waves in the ion cyclotron range of frequencies and energetic ions from neutral beam injection sources, in addition to internally-generated Ohmic heating from the induced plasma current that also serves to create the magnetic equilibrium for the discharge. Since the success of the ITER project depends critically on the ability to create and maintain burning plasma conditions, it is absolutely necessary to have physics-based models that can accurately simulate the RF processes that affect the dynamical evolution of the ITER discharge. The Center for Simulation of Wave-Plasma Interactions (CSWPI) is a multi-institutional collaboration that has conducted ongoing research aimed at developing: (1) Coupled core-to-edge simulations that will lead to an increased understanding of parasitic losses of the applied RF power in the boundary plasma between the RF antenna and the core plasma; (2) Development of models for core interactions of RF waves with energetic electrons and ions (including fusion alpha particles and fast neutral beam ions) that include a more accurate representation of the particle dynamics in the combined equilibrium and wave fields; and (3) Development of improved algorithms that will take advantage of massively parallel computing platforms at the petascale level and beyond to achieve the needed physics, resolution, and/or statistics to address these issues. This research reported in this final technical report is focused on further verification and validation of simulation models for interactions of RF waves with energetic particles in the core with a long term goal of assessing their readiness for inclusion in integrated modeling frameworks and utilizing the world’s largest supercomputers to quantitatively predict the detailed electric field structure in the vicinity of the launching structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A dual-channel, focusing x-ray spectrograph with uniform dispersion for Z pinch plasmas measurement

A dual-channel, focusing x-ray spectrograph with uniform dispersion (i.e., the linear dispersion of this spectrograph is a constant) is described for measuring the x-ray spectra emission from the hot, dense Al Z pinch plasmas. The spectrograph uses double uniform-dispersed crystals (e.g., a Quartz 1010 crystal and a Mica 002 crystal) as dispersion elements and a double-film box as detector to achieve the simultaneous recording of the time integrated spectrum covering a wide spectral range of {approx}5-9 A. Since this spectrograph disperse the x-rays on the detector plane with uniform spacing for every wavelength, it needs not the calibration of the wavelength with spatial coordinate, thereby own the advantages of easiness and veracity for spectra identification. The design of this spectrograph and the example of experiment on the ''Yang'' accelerator are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microturbulence in DIII-D tokamak pedestal. I. Electrostatic instabilities

Gyrokinetic simulations of electrostatic driftwave instabilities in a tokamak edge have been carried out to study the turbulent transport in the pedestal of an H-mode plasma. The simulations use annulus geometry and focus on two radial regions of a DIII-D experiment: the pedestal top with a mild pressure gradient and the middle of the pedestal with a steep pressure gradient. A reactive trapped electron instability with a typical ballooning mode structure is excited by trapped electrons in the pedestal top. In the middle of the pedestal, the electrostatic instability exhibits an unusual mode structure, which peaks at the poloidal angle θ=±π/2. The simulations find that this unusual mode structure is due to the steep pressure gradients in the pedestal but not due to the particular DIII-D magnetic geometry. Realistic DIII-D geometry appears to have a stabilizing effect on the instability when compared to a simple circular tokamak geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Technical Report for "Nuclear Technologies for Near Term Fusion Devices"

Over approximately 18 years, this project evolved to focus on a number of related topics, all tied to the nuclear analysis of fusion energy systems. For the earliest years, the University of Wisconsin (UW)’s effort was in support of the Advanced Power Extraction (APEX) study to investigate high power density first wall and blanket systems. A variety of design concepts were studied before this study gave way to a design effort for a US Test Blanket Module (TBM) to be installed in ITER. Simultaneous to this TBM project, nuclear analysis supported the conceptual design of a number of fusion nuclear science facilities that might fill a role in the path to fusion energy. Beginning in approximately 2005, this project added a component focused on the development of novel radiation transport software capability in support of the above nuclear analysis needs. Specifically, a clear need was identified to support neutron and photon transport on the complex geometries associated with Computer-Aided Design (CAD). Following the initial development of the Direct Accelerated Geoemtry Monte Carlo (DAGMC) capability, additional features were added, including unstructured mesh tallies and multi-physics analysis such as the Rigorous 2-Step (R2S) methodology for Shutdown Dose Rate (SDR) prediction. Throughout the project, there were also smaller tasks in support of the fusion materials community and for the testing of changes to the nuclear data that is fundamental to this kind of nuclear analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-frequency linear-mode regimes in the tokamak scrape-off layer

Motivated by the wide range of physical parameters characterizing the scrape-off layer (SOL) of existing tokamaks, the regimes of low-frequency linear instabilities in the SOL are identified by numerical and analytical calculations based on the linear, drift-reduced Braginskii equations, with cold ions. The focus is put on ballooning modes and drift wave instabilities, i.e., their resistive, inertial, and ideal branches. A systematic study of each instability is performed, and the parameter space region where they dominate is identified. It is found that the drift waves dominate at high R/L{sub n}, while the ballooning modes at low R/L{sub n}; the relative influence of resistive and inertial effects is discussed. Electromagnetic effects suppress the drift waves and, when the threshold for ideal stability is overcome, the ideal ballooning mode develops. Our analysis is a first stage tool for the understanding of turbulence in the tokamak SOL, necessary to interpret the results of non-linear simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Practical gyrokinetics

We report thousands of gyrokinetic papers have been published since the introduction of the gyrokinetic change of variables. The intent here is not to review the field, but rather the goal is to present a tutorial providing insight into why gyrokinetics is an appropriate description of turbulent transport. The focus is on turbulent transport in axisymmetric tokamaks, but many of the ideas and techniques are applicable to stellarators and other magnetic fusion devices with nested surfaces of constant pressure. Besides the origins of gyrokinetics and recent insights, gyrokinetic orderings and gyrokinetic variables are summarized. Then a compact, but careful, derivation of the simplest electrostatic gyrokinetic equation for tokamaks is presented, along with a brief mention of gyrokinetics for stellarators. The advantages of assuming scale separation between the finer spatial scales and faster time variation of the turbulence and the global behaviour and slow temporal evolution of the background are stressed. Moreover, the procedure for removing the adiabatic or Maxwell–Boltzmann response is emphasized. Scale separation allows the near Maxwellian behaviour of the background and the rapid variation of the turbulence to be described by separate, local gyrokinetic equations. The turbulent fluctuations are found by solving the nonlinear gyrokinetic equation for the non-adiabatic portion of the fluctuating distribution function. Also, generalizations of the gyrokinetic equation so that it retains electromagnetic and flow modifications are considered in detail along with some symmetry properties. In addition, ambipolarity, particle transport and heat transport are addressed, along with a discussion of the complications associated with describing momentum transport and profile evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Practical Gyrokinetics

Thousands of gyrokinetic papers have been published since the introduction of the gyrokinetic change of variables. The intent here is not to review the field, but rather the goal is to present a tutorial providing insight into why gyrokinetics is an appropriate description of turbulent transport. The focus is on turbulent transport in axisymmetric tokamaks, but many of the ideas and techniques are applicable to stellarators and other magnetic fusion devices with nested surfaces of constant pressure. Besides the origins of gyrokinetics and recent insights, gyrokinetic orderings and gyrokinetic variables are summarized. Then a compact, but careful, derivation of the simplest electrostatic gyrokinetic equation for tokamaks is presented, along with a brief mention of gyrokinetics for stellarators. The advantages of assuming scale separation between the finer scales and faster time variation of the turbulence and the global behavior and slow temporal evolution of the background are stressed. Moreover, the procedure for removing the adiabatic or Maxwell-Boltzmann response is emphasized. Scale separation allows the near Maxwellian behavior of the background and the rapid variation of the turbulence to be described by separate local gyrokinetic equations. The turbulent fluctuations are found by solving the nonlinear gyrokinetic equation for the non-adiabatic portion of the fluctuating distribution function. Also, generalizations of the gyrokinetic equation so that it retains electromagnetic and flow modifications are considered in detail along with some symmetry properties. In addition, ambipolarity, particle transport, and heat transport are addressed, along with a discussion of the complications associated with describing momentum transport and profile evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-scale modelling to relate beryllium surface temperature, deuterium concentration and erosion in fusion reactor environment

Beryllium (Be) has been chosen as the plasma-facing material for the main wall of ITER, the next generation fusion reactor. Identifying the key parameters that determine Be erosion under reactor relevant conditions is vital to predict the ITER plasma-facing component lifetime and viability. To date, a certain prediction of Be erosion, focusing on the effect of two such parameters, surface temperature and D surface content, has not been achieved. In this paper, we develop the first multi-scale KMC-MD modeling approach for Be to provide a more accurate database for its erosion, as well as investigating parameters that affect erosion. First, we calculate the complex relationship between surface temperature and D concentration precisely by simulating the time evolution of the system using an object kinetic Monte Carlo (OKMC) technique. These simulations provide a D surface concentration profile for any surface temperature and incoming D energy. We then describe how this profile can be implemented as a starting configuration in molecular dynamics (MD) simulations. We finally use MD simulations to investigate the effect of temperature (300–800 K) and impact energy (10–200 eV) on the erosion of Be due to D plasma irradiations. The results reveal a strong dependency of the D surface content on temperature. Increasing the surface temperature leads to a lower D concentration at the surface, because of the tendency of D atoms to avoid being accommodated in a vacancy, and de-trapping from impurity sites diffuse fast toward bulk. At the next step, total and molecular Be erosion yields due to D irradiations are analyzed using MD simulations. The results show a strong dependency of erosion yields on surface temperature and incoming ion energy. The total Be erosion yield increases with temperature for impact energies up to 100 eV. However, increasing temperature and impact energy results in a lower fraction of Be atoms being sputtered as BeD molecules due to the lower D surface concentrations at higher temperatures. Finally, these findings correlate well with different experiments performed at JET and PISCES-B devices.

36 MATERIALS SCIENCE↗

Anisotropic electron temperature measurements without knowing the spectral transmissivity for a JT-60SA Thomson scattering diagnostic

This paper focuses on a method for measuring the electron temperature (T{sub e}) without knowing the transmissivity using Thomson scattering diagnostic with a double-pass scattering system. Application of this method for measuring the anisotropic T{sub e}, i.e., the T{sub e} in the directions parallel (T{sub e Double-Vertical-Line Double-Vertical-Line }) and perpendicular (T{sub e Up-Tack }) to the magnetic field, is proposed. Simulations based on the designed parameters for a JT-60SA indicate the feasibility of the measurements except in certain T{sub e} ranges, e.g., T{sub e Double-Vertical-Line Double-Vertical-Line }{approx} 3.5T{sub e Up-Tack} at 120 Degree-Sign of the scattering angle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Progress on the Plasmoid Thruster Experiment (PTX)

A plasmoid, also called a compact toroid, is a compact plasma structure with an integral magnetic field, that may be categorized according to the relative strength of the poloidal and toroidal magnetic field (Bp and Bt, respectively). An object with Bp/Bt much greater than 1 is called a Field Reverse Configuration (FRC); if Bp = Bt, it is called a Spheromak. The plasmoid thruster is a pulsed inductive device which operates by repetitively producing plasmoids that are accelerated and ejected at high velocity. As the process is inductive, this thruster avoids the problem of electrode erosion. Also, the magnetic structure of the plasmoid should suppress thermal and mass losses to the wall, and improve detachment of the plasma exhaust from the thruster. This concept should be capable of producing an Isp of 5,000 seconds and greater, with thrust densities of order 10(exp 5) N/sq m. The plasmoid thruster consists chiefly of a conical theta-pinch coil. Propellant is introduced onto a bias magnetic field, produced by an auxiliary coil, and is then pre-ionized, freezing in the magnetic field. The theta-pinch coil is then energized producing a field aligned anti- parallel to the bias field. The reversed field reconnects with the bias field to form the plasmoid. The magnetic pressure of the reversed field accelerates the plasmoid out of the thruster . A series of experiments have been conducted on the PTX device, which consisted of a single turn conical theta-pinch coil, driven by a 560 nF, 35 kV capacitor bank, which rang at a frequency of 500 kHz, and served all three functions required for formation: pre-ionization, bias field loading, and field reversal. Initial ionization was found to occur in an annular region at the exit plane of the coil, and was found to be reproducible with a variety of gases, including H2, D2, Ar, and an H2/N2 mixture (75% / 25%). A fast gas valve for injecting propellant has been tested, as well as a ringing pre-ionization circuit (operating at 5 Mhz) to better control the plasmoid formation. Velocities as high as 20 km/s have been measured for a plasmoid propagating into a static back-fill of neutral gas. Magnetic field and density measurements indicate that the plasmoid retains its structure well into the down-stream exhaust region, and that it is capable of pushing a dense cloud of neutral gas in front of it. Further experiments will focus on the effects of coil geometry and bias-field strength on the performance of the device. A high-power solid-state switching system is being developed in order to replace the spark-gap switch.

Martin, Adam↗

U.S. Fusion D-Li Neutron Irradiation Facility: Fusion Prototypic Neutron Source (FPNS) Technology Study

A primary engineering challenge for the realization of fusion energy involves the development of high-performance structural and plasma-facing materials with dimensional stability and resistance to neutron degradation of mechanical properties. The harsh fusion environment, including high levels of helium production and other transmutation products along with high operating temperatures, poses an extreme challenge for materials. Identifying materials that can withstand these conditions is a high priority for fusion energy research. Critical to resolving this gap in scientific understanding is developing a neutron source facility with the ability to mimic the extreme conditions in a fusion reactor. Working with the Department of Energy (DOE) Office of Fusion Energy Sciences (FES), Oak Ridge National Laboratory (ORNL) and the Virtual Laboratory for Technology (VLT) organized a workshop to discuss the need for a Fusion Prototypic Neutron Source (FPNS). [1] While there are a variety of uses for FPNS neutrons, the main driver of US interest is expanding the scientific understanding of materials degradation in the deuterium-tritium (D-T) fusion environment. FPNS will help build the scientific foundation required to enable design of a next step fusion device. Using specifications from previous projects as a guide, key parameters were agreed upon for a near term, moderate cost US facility that would be complementary to the more extensive plans of the International Fusion Materials Irradiation Facility (IFMIF). Types of facilities that could potentially meet those criteria were identified. A scoping study for three technologies was initiated to answer three critical questions: 1) Can the concept meet the key parameters, 2) What is the estimated cost, and 3) What is the estimated schedule. One approach selected for the scoping study is a D-Li stripping source similar to the design of the IFMIF but at a lower beam power and atomic displacement rate for cost and schedule reasons. The purpose of this report is to document the results of the D-Li stripping source option study, providing answers to the three questions. The approach to generating a fusion prototypic neutron source using a deuteron beam incident on a flowing lithium target has been studied for more than 40 years. As a result of the research and development recently executed primarily in Europe and Japan, the ability of this approach to meet key parameters (damage parameters, irradiation volume) outlined in the US workshop for a near-term, moderate cost fusion prototypic neutron source facility is not in doubt. The main question that must be answered is the cost of such a facility. As a result, a strong focus was placed on understanding alternatives for developing the facility and their relative costs. The project was broken into four components for the cost estimate: the ion source, accelerator, lithium target system, and conventional facilities. The cost of the accelerator is an important cost driver for the D-Li stripping concept. To fully understand the range of the accelerator cost, multiple alternatives were considered including normal conducting and superconducting linacs and the frequency of the radiofrequency quadrupole. Multiple previous design studies dating from 1989 through 2017 were examined (costs were escalated to 2019 dollars) and compared. After analysis, two options were selected for costing, one superconducting and one room temperature. We found similar project costs for the two accelerator options, on the order of $100M including design and project management but excluding contingency. Including everything except the conventional facilities, the estimate for the neutron source facility is estimated to be $220M without contingency. Additional significant costs for the facility are the conventional costs arising from the need to construct buildings for the accelerator and target facilities, bringing electrical power to the site including a new substation, and removing the heat from the facility using heat exchangers. While ORNL would oversee this work, much of the effort would be executed by contractors. Estimates for this effort was based on similar projects that are currently being executed at ORNL or were executed at ORNL in the recent past. The estimate for conventional facilities for the neutron facility is $173M without contingency, bringing the total project cost to $393M without contingency. With a 50% contingency, the estimated cost is $589M. The estimate range was established using guidance from the Association for the Advancement of Cost Engineering (AACE). Specifically, guidance from recommended practice 17R-97 provides insight on the expected accuracy range of estimates based on the degree of project definition and the position of the project in the stage-gate process or maturity timeline. An AACE Class 5 type estimate is appropriate for concept screening. The expected accuracy range includes a low end of -50% to -20% and a high end of +30% to +100% around the estimated cost. For the D-Li stripping neutron source, a -20% to +100% cost range was applied for a recommended cost range of $471M to $1,179M. Less emphasis was placed on determining the project schedule due to the fact that the project costs were large and may eliminate this option from consideration. The development of the accelerator facility may require on the order of five years without contingency. A more realistic schedule with contingency may be seven years. However, this estimate should be scrutinized in a preconceptual design activity if a more realistic estimate is needed. Finally, one lesson learned in this process is that the requirements for a near-term, moderate cost facility drives the alternative selection toward existing facilities and infrastructure. The D-Li stripping neutron source option requires a green field site due to the lack of existing buildings and infrastructure that can be reused for this effort. As a result, the conventional facilities costs are a significant fraction of the total facility cost. Other neutron source options where buildings, electrical power, and cooling infrastructure already exist may be able to meet the requirements for a near term, moderate cost facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear parallel momentum transport in strong electrostatic turbulence

Most existing theoretical studies of momentum transport focus on calculating the Reynolds stress based on quasilinear theory, without considering the nonlinear momentum flux-〈v{sup ~}{sub r}n{sup ~}u{sup ~}{sub ∥}〉. However, a recent experiment on TORPEX found that the nonlinear toroidal momentum flux induced by blobs makes a significant contribution as compared to the Reynolds stress [Labit et al., Phys. Plasmas 18, 032308 (2011)]. In this work, the nonlinear parallel momentum flux in strong electrostatic turbulence is calculated by using a three dimensional Hasegawa-Mima equation, which is relevant for tokamak edge turbulence. It is shown that the nonlinear diffusivity is smaller than the quasilinear diffusivity from Reynolds stress. However, the leading order nonlinear residual stress can be comparable to the quasilinear residual stress, and so may be important to intrinsic rotation in tokamak edge plasmas. A key difference from the quasilinear residual stress is that parallel fluctuation spectrum asymmetry is not required for nonlinear residual stress.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fourier-spectral element approximation of the ion–electron Braginskii system with application to tokamak edge plasma in divertor configuration

Due to the extreme conditions required to produce energy by nuclear fusion in tokamaks, simulating the plasma behavior is an important but challenging task. We focus on the edge part of the plasma, where fluid approaches are probably the best suited, and our approach relies on the Braginskii ion–electron model. Assuming that the electric field is electrostatic, this yields a set of 10 strongly coupled and non-linear conservation equations that exhibit multiscale and anisotropy features. The computational domain is a torus of complex geometrical section, that corresponds to the divertor configuration, i.e. with an “X-point” in the magnetic surfaces. To capture the complex physics that is involved, high order methods are used: The time-discretization is based on a Strang splitting, that combines implicit and explicit high order Runge–Kutta schemes, and the space discretization makes use of the spectral element method in the poloidal plane together with Fourier expansions in the toroidal direction. The paper thoroughly describes the algorithms that have been developed, provides some numerical validations of the key algorithms and exhibits the results of preliminary numerical experiments. In particular, we point out that the highest frequency of the system is intermediate between the ion and electron cyclotron frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗