SEARCH · Search NASA

Results for “Potential energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Analysis of progressive damage in thin circular laminates due to static-equivalent impact loads

Clamped circular graphite/epoxy plates (25.4, 38.1, and 50.8 mm radii) with an 8-ply quasi-isotropic layup were analyzed for static-equivalent impact loads using the minimum-total-potential-energy method and the von Karman strain-displacement equations. A step-by-step incremental transverse displacement procedure was used to calculate plate load and ply stresses. The ply failure region was calculated using the Tsai-Wu criterion. The corresponding failure modes (splitting and fiber failure) were determined using the maximum stress criteria. The first-failure mode was splitting and initiated first in the bottom ply. The splitting-failure thresholds were relatively low and tended to be lower for larger plates than for small plates. The splitting-damage region in each ply was elongated in its fiber direction; the bottom ply had the largest damage region. The calculated damage region for the 25.4-mm-radius plate agreed with limited static test results from the literature.

Shivakumar, K. N.↗

NASA NTRS1983

Photodissociation processes in the OH molecule

The potential energy curves of several excited states of OH of 2Sigma(+), 2Sigma(-), 2Pi, and 2Delta symmetries, and the transition moments connecting the excited states with the ground state and with each other, are calculated using two previously published theoretical models. The importance of the excited states in photodissociation is explored. Direct photodissociation by absorption into repulsive electronic states, as well as the contribution of absorption into bound electronic states, are discussed. Because they may participate in the photodissociation processes, several quartet states and one of the sextet spin multiplicity are investigated. The mechanism by which bound states can be dissociated are considered and estimates of the dissociation efficiencies of the mechanisms are made. Absorption into the bound 3 2Pi state may be an important dissociation channel. It is shown that OH is dissociated by the absorption of Lyman alpha radiation, a channel of particular significance in shocked interstellar gas and in cometary atmospheres.

Van Dishoeck, E. F.↗

NASA NTRS1982

Unsymmetrically laminated composites

Classical lamination theory predicts that the room-temperature shapes of all elevated-temperature cure, unsymmetrically laminated composites are saddles. However, experimental observation indicates that the shapes are often cylindrical. In addition, a second cylindrical can sometimes be obtained from the first by a simple snap-through action. A geometrically nonlinear extension to classical lamination theory is used to explain this behavior. Approximate solutions to the nonlinear extension are obtained by using a Rayleigh-Ritz minimization of the laminate's total potential energy. A stability analysis explains the dual cylindrical shapes.

Hyer, M. W.↗

NASA NTRS1983

Nonparametric solution of the Euler equations for steady flow

A theory is presented for formulating well-posed boundary value problems for the Euler equations for steady rotational flow. It is shown that the Euler equations of motion are equivalent to a variational principle, which is used to define a finite difference scheme for numerically solving the Euler equations. The principle is extended to MHD problems in terms of a potential energy of a perfectly conducting plasma having a minimum number of stable configurations. The flow around a cylinder is considered, noting that time-independent solutions of the Euler equations can be used to provide limits to solutions of the Navier-Stokes equations. A sample is worked out in terms of the motion of vortices inside a circle.

Garabedian, P. R.↗

NASA NTRS1984

Drainage Evolution in the Debris Avalanche Deposits Near Mount Saint Helens, Washington

The 18 May 1980 eruption of Mount St. Helens was initiated by a massive rockslide-debris avalanche which completely transformed the upper 25 km of the North Fork Toutle River valley. The debris was generated by one of the largest gravitational mass movements ever recorded on Earth. Moving at an average velocity of 35 m/s, the debris avalanche buried approximately 60 sq km of terrain to an average depth of 45 m with unconsolidated, poorly sorted volcaniclastic material, all within a period of 10 minutes. Where exposed and unaltered by subsequent lahars and pyroclastic flows, the new terrain surface was characterized predominantly by hummocks, closed depressions, and the absence of an identifiable channel network. Following emplacement of the debris avalanche, a complex interrelationship of fluvial and mass wasting processes immediately began operating to return the impacted area to an equilibrium status through the removal of material (potential energy) and re-establishment of graded conditions. In an attempt to chronicle the morphologic evolution of this unique environmental setting, a systematic series of interpretative maps of several selected areas was produced. These maps, which document the rate and character of active geomorphic processes, are discussed.

Gary L Beach↗

NASA NTRS1984

The role of water in slip casting

Slips and casting are considered in terms of physical and colloidal chemistry. Casting slips are polydisperse suspensions of lyophobic particles in water, whose degree of coagulation is controlled by interaction of flocculating and deflocculating agents. Slip casting rate and viscosity are functions of temperature. Slip rheology and response to deflocculating agents varies significantly as the kinds and amounts of colloid modifiers change. Water is considered as a raw material. Various concepts of water/clay interactions and structures are discussed. Casting is a de-watering operation in which water moves from slip to cast to mold in response to a potential energy termed moisture stress. Drying is an evaporative process from a free water surface.

Mccauley, R. A.↗

NASA NTRS1984

Use of satellite data in a diagnostic parameterization of convective heating

Heating estimates derived from a diagnostic technique using observed rainfall and GOES IR digital imagery were completed and evaluated for accuracy. A sensitivity analysis was done to examine assumptions regarding shape of the normalized mass flux profile, cloud precipitation efficiency, and existence of convective scale downdrafts. The results, which were derived using what are felt to be bounding limits of the assumptions, indicate that the heating estimates are reliable for use in diagnostic available potential energy (APE) budgets. Comparison to heating estimates derived as residuals in the thermodynamic equation show the level of maximum heating (near 300 mb) to be the same on a time averaged basis. Heating estimates were used to study the response of the large scale environment to the cumulus scale thermodynamic forcing. An analysis of the thermally forced component of vertical motion through the omega equation showed that a significant fraction of the total grid scale upward motion results from the heating provided by the condensation and vertical eddy heat transport in the convective cells.

Robertson, F. R.↗

NASA NTRS1983

Dissipative melting as a mechanism for core formation

Cosmochemical studies strongly favor a near-homogeneous accretion of the earth. These studies also show that core segregation probably occurred within the first 100,000 years of earth history. Mechanisms of core formation have received relatively little attention. The principal purpose of this paper is to examine dissipative melting as a possible mechanism for core segregation. For a large iron body migrating through the mantle, the potential energy lost by the body is dissipated by frictional heating. If the body has a radius greater than about 30 km, the frictional heating is sufficient to melt a path through which the body can fall. If the iron body is liquid (as expected) with a low viscosity, it would penetrate the mantle as a diapir. The problem of an immiscible liquid body melting its way through a solid is solved, and a family of diapir shapes is obtained. It is found that dissipative heating may be a viable mechanism for core segregation if sufficiently large bodies of liquid iron can form.

Turcotte, D. L.↗

NASA NTRS1983

Energetics analysis of the global circulation during the special observation periods of FGGE

A global energetics analysis is presented for the FGGE SOP-1 and SOP-2 with ECMWF and GFDL data sets. Both global integral properties and spectral characteristics are examined. There is a large discrepancy between the present FGGE analysis and previously available estimates concerning the level of available potential energy and kinetic energy. This discrepancy is attributable to an earlier restriction of data coverage. There is a significant seasonal difference in the energy reservoir of the Northern Hemisphere, whereas the diference is minor in the Southern Hemisphere. This leads to a seasonal contrast of the globally integrated energy budget which comes mostly from the Northern Hemisphere. Both the global energy level and the intensity of the general circulation are more pronounced during SOP-1 than during SOP-2. One major focus of attention in this study is an energetics comparison of ECMWF and GFDL data sets. There is a twofold difference in the intensity of the general circulation as measured with these two data sets. The energetics diagnosis indicates that the operational modes of the general circulation as described by these two data sets also differ considerably. The contrasts between SOP-1 and SOP-2 and between the ECMWF and GFDL versions of the data sets are apparent in the pattern of energy flow in the wavenumber domain.

Kung, E. C.↗

NASA NTRS1983

Thermal stresses in bonded solar cells - The effect of the adhesive layer

A two-dimensional, rectangular model of a proposed solar cell structure is analyzed as two plate elements bonded with an elastic continuum. The governing equations are formulated using the principle of minimum potential energy, with displacement components that vary linearly through the thickness of the adhesive layer. An approximate solution is constructed for a particular class of material properties and is characterized by a boundary layer near the unloaded edge. Both interface stress components achieve their largest values at the edge, and the maximum shear stress is independent of the Young's Modulus of the substrate.

Williams, H. E.↗

NASA NTRS1984

The nonaxisymmetric baroclinic instability in thin accretion disks

The instability of linear, nonaxisymmetric baroclinic waves in the radiative regions of a thin accretion disk is investigated with simplifying assumptions used in the representation of the structure of the basic state. As in stars with rotation laws deviating from rotation on cylinders, the departure from barotropy ('baroclinicity') resulting from such rotation feeds potential energy from the basic state into the kinetic energy of the baroclinic motions. The baroclinic instability is considered as a possible mechanism for driving turbulence in disks. Estimations of the Reynolds stress from baroclinic waves indicate that the degree of baroclinicity in stationary disk models is insufficient to account for the large viscosity inferred from observations of, e.g., cataclysmic variables.

Cabot, W.↗

NASA NTRS1984

Metastability of isoformyl ions in collisions with helium and hydrogen

The stability of HOC(+) ions under conditions in interstellar molecular clouds is considered. In particular, the possibility that collisions with helium or hydrogen will induce isomerization to the stable HCO(+) form is examined theoretically. Portions of the electronic potential energy surfaces for interaction with He and H atoms are obtained from standard quantum mechanical calculations. Collisions with He atoms are found to be totally ineffective for inducing isomerization. Collisions with H atoms are found to be ineffective at low interstellar temperatures owing to a small (about 500 K) barrier in the entrance channel; at higher temperatures where this barrier can be overcome, however, collisions with hydrogen atoms do result in conversion to the stable HCO(+) form. Although detailed calculations are not presented, it is argued that low-energy collisions with H2 molecules are also ineffective in destroying the metastable ion.

Green, S.↗

NASA NTRS1983

Nonlinear effects of elastic coupling in unsymmetric laminates

Classical lamination theory predicts the room-temperature shape of all unsymmetrically laminated, elevated-temperature cure composites to be a saddle shape. Experimental observation indicates, however, that in many cases the room-temperature shape is cylindrical. In addition, a second cylindrical shape can often be obtained from the first by a simple snap-through action. It is the elastic couplings between inplane and out-of-plane deformations which are inherent in unsymmetric laminates that are responsible for the room-temperature shape. However, the couplings are so strong that geometrically nonlinear effects are produced. These are not accounted for in the classical theory. This paper reviews a theory developed to explain the effects of the coupling on laminate shape. The theory is based on a minimization of the laminate's total potential energy. The theory accounts for geometric nonlinearities. Because the problem is nonlinear, approximate solutions are sought by using a Rayleigh-Ritz procedure. Because of the observed snap-through of some laminates, stability of the predicted shapes is examined. Numerical results and some limited experimental data are presented for several laminates.

Hyer, M. W.↗

NASA NTRS1984

Hydrogen atom abstraction from aldehydes - OH + H2CO and O + H2CO

The essential features of the potential energy surfaces governing hydrogen abstraction from formaldehyde by oxygen atom and hydroxyl radical have been characterized with ab inito multiconfiguration Hartree-Fock (MCHF) and configuration interaction (CI) wave functions. The results are consistent with a very small activation energy for the OH + H2CO reaction, and an activation energy of a few kcal/mol for the O + H2CO reaction. In the transition state structure of both systems, the attacking oxygen atom is nearly collinear with the attacked CH bond.

Dupuis, M.↗

NASA NTRS1984

Non-quasi-geostrophic effects in baroclinic waves with latent heat release

A study is conducted for the non-quasi-geostrophic baroclinic wave effects in a saturated atmosphere whose vertical motion is subject to pseudo-adiabatic processes. With respect to the characteristics of energetics for the first-order solution, it is noted that, in the cases of both the dry mode and the first moist mode, the heat transport quantities due to the second-order eddy are small and opposite in sign to their respective transports. The non-quasi-geostrophic effects render the vertical motion field asymmetric in each of the regions involved and enter into the present treatment only as nonlinear terms. The moisture transport terms in the eddy-available potential energy equation is small by comparison to other individual terms in the cyclone scale motion's energetics calculation. This is consistent with the observational results of Smith (1980).

Fichtl, G. H.↗

NASA NTRS1984

Dynamic Conversion Working Group Summary

The potential of dynamic conversion devices for use in solar and nuclear dynamic space power systems was addressed. Conversion systems considered were based on the use of Brayton, Stirling and Rankine cycles. Both organic and liquid metal Rankine cycles were included. The basic system considerations were: mission requirements, system attributes, system options, technology issues and constraints, and priorities of needed technology development. Mission requirements, where dynamic conversion was considered enabling technology, were identified along with the associated power levels and potential energy sources. When considering the system options special attention was given to recommend operating temperatures and other significant discriminators. A list of prioritized tasks considered important for the successful development of dynamic conversion systems for 1995 and beyond was compiled.

Chaffee, N.↗

NASA NTRS1984

Analysis of Diabatic Heating During FGGE

The objective is to examine the maintenance of momentum and thermal fields in the Southern Hemisphere and the diabatic heating and generation of available potential energy of the entire global atmosphere. The data generated by the Goddard Laboratory for Atmospheric Sciences First GARP Global Experiment (FGGE) III-b analysis for SOP1 and SOP2 are used for this effort. It is observed that the atmospheric circulation of the Southern Hemisphere exhibits a double jet structure (subtropical jet and polar jet) in winter and a single jet in summer during the FGGE year. The geographic distribution of standard deviation in the height field at 500 mb indicates that the major eddy activities occur in the downstream side of the polar jet and poleward side of the subtropic jet in winter. However, the major eddy activites go hand-in-hand with the jet stream in summer. The momentum transport is essentially carried out by the transient eddies in both seasons. The distribution of the temperature field is more axisymmetric in the Southern Hemisphere than in the Northern Hemisphere. The sensible heat is mainly transported poleward by transient eddies along the strong baroclinic zone where the jet streams are located. In other seasons, it is shown from the geographic distribution of the divergence of transient eddy sensible heat flux that the Antarctic continent acts as a heat sink to consume the sensible heat converged toward the polar area from the middle and low latitudes.

Chen, T. C.↗

NASA NTRS1984

Thermal-stress analysis for a wood composite blade

A thermal-stress analysis of a wind turbine blade made of wood composite material is reported. First, the governing partial differential equation on heat conduction is derived, then, a finite element procedure using variational approach is developed for the solution of the governing equation. Thus, the temperature distribution throughout the blade is determined. Next, based on the temperature distribution, a finite element procedure using potential energy approach is applied to determine the thermal-stress distribution. A set of results is obtained through the use of a computer, which is considered to be satisfactory. All computer programs are contained in the report.

Fu, K. C.↗