Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROUTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Electrical properties of samarium cobaltite nanoparticles synthesized using Sol–Gel autocombustion route

Highlights: • The structural evolution and its electrical properties of samarium cobaltite nanograins are discussed. • Optimization of SmCoO{sub 3} nanograins is achieved by post sintering as-prepared gel at 800 °C. • The impedance spectra indicate the semiconducting behavior SmCoO{sub 3} nanograins. - Abstract: Nanograins of SmCoO{sub 3} are prepared by citric acid assisted Sol–Gel autocombustion route. The characterizations of crystal structure, surface morphology and electrical properties of SmCoO{sub 3} powder are done using XRD, HRSEM, FTIR and BDS. The structural evolution of SmCoO{sub 3} upon increasing the annealing temperature is followed using XRD and FTIR analyses. The powder sample contains polycrystalline grains with average size equal to 35 nm and orthorhombic perovskite structure with Pbnm space group. The vibrational bands observed in FTIR spectrum at 545 cm{sup −1} and 439 cm{sup −1} correspond to Co-O stretching modes in cobaltite system. HRSEM images of the sample show the formation of hexagonal shaped grains of samarium cobaltite. The AC electrical conductivity of 4.914 × 10{sup −5} S cm{sup −1} at 295 K is measured for SmCoO{sub 3} nanoparticles. The impedance spectra bring out the semiconducting behavior of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2014

A facile route to high-purity BN nanoplates with ultraviolet cathodoluminescence emissions at room temperature

Highlights: • We present a novel and simple approach to great-scale fabrication of BN nanoplates. • The as-synthesized products are extensively characterized. • The formation mechanism of BN nanoplates are elucidated based on experimental observations. • A growth model was proposed according to our experimental observations and analysis. • BN nanoplates’ CL performance envisions its applications such as UV emitters. - Abstract: We present a novel and notably simple approach to fabricate BN nanoplates in large scale employing ammonia borane as a single-source precursor. The structure and chemical composition of the as-synthesized products are extensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and electron energy-loss spectroscopy (EELS). XRD analysis indicates that the products are hexagonal BN crystal. SEM images confirm that the BN nanoplates have an average diameter of about 200 nm and thickness of tens of nanometers. HRTEM results illustrate the BN nanoplates to be single-crystals. EELS result suggests the nanoplates are composed of boron and nitride elements. The formation mechanism of the BN nanoplates has been elucidated based on our experimental observations, and a growth model has been proposed accordingly. Cathodoluminescence spectroscopic analysis is performed and strong ultraviolet (UV) emissions are detected. Our method provides a simple route towards the large-scale fabrication of high-quality BN nanoplates, for which various promising applications such as compact UV emitters can be envisioned.

36 MATERIALS SCIENCE↗
DOE OSTI2015

A facile and scalable route to nano-crystallized kesterite Cu{sub 2}ZnSnS{sub 4} fibers via electrospinning/sulfurization

Detailed characterization of the microstructure and its properties have been done on the nanocrystallized CZTS nanofibers fabricated via electrospinning following sulfurization. The fiber growth mechanism is proposed to explain the spontaneous reaction and crystallization of CZTS, as confirmed by the thermodynamic calculations. - Abstract: In this work, we report facile route to quaternary kesterite Cu{sub 2}ZnSnS{sub 4} (CZTS) microfibers through electrospinning method. Precursor fibers are electrospun from the solution composed of Cu(CH{sub 3}COO){sub 2}, Zn(CH{sub 3}COO){sub 2{sup ,}} and SnCl{sub 4} as the solutes, ethylene glycol methyl ether as the solvent, and polyvinylpyrrolidone (PVP) as the plasticizer. CZTS fibers are obtained after annealing at 773 K for 40 min in a sulfur ambient. Characterization including scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Raman spectra, confirm the formation of single-phased, well-crystallized CZTS fibers, with a band gap of about 1.48 eV estimated from the optical absorption curve. In addition, the fiber growth mechanism is proposed to explain the spontaneous reaction and crystallization of CZTS, as confirmed by the thermodynamic calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Influence of processing route on electrical properties of Bi{sub 4}Ti{sub 3}O{sub 12} ceramics obtained by tape-casting technology

Highlights: • Bi{sub 4}Ti{sub 3}O{sub 12} thick films were obtained by SSR and PPM methods. • Both systems crystallize in an orthorhombic structure. • Textured characteristics were evidenced. • Grain morphology affects the P–E loops. - Abstract: Bismuth titanate powders (Bi{sub 4}Ti{sub 3}O{sub 12}-BIT) were fabricated by solid state reaction (SSR) and polymeric precursor method (PPM). From these powders, Bi{sub 4}Ti{sub 3}O{sub 12} pellets were obtained by tape-casting using plate-like templates particles prepared by a molten salt method. The BIT phase crystallizes in an orthorhombic structure type with space group Fmmm. Agglomeration of the particles, which affects the densification of the ceramic, electrical conduction and leakage current at high electric fields, was monitored by transmission electronic microscopy (TEM) analyses. FEG-SEM indicated that different shape of grains of BIT ceramics was influenced by the processing route. Both SSR and PPM methods lead to unsaturated P–E loops of BIT ceramics originating from the highly c-axis orientation and high conductivity which was affected by charge carriers flowing normally to the grain boundary of the crystal lattice.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Microstructural features of the La{sub 1−x}Ca{sub x}FeO{sub 3−δ} solid solutions prepared via Pechini route

Highlights: • La{sub 1−x}Ca{sub x}FeO {sub (3−δ)} (0 ≤ x ≤ 0.7) perovskite were prepared by Pechini method. • Planar defects in direction (1 0 1) were observed in the perovskite surface. • α-Fe{sub 2}O{sub 3} particles (1–10 nm) on the surface of perovskite were revealed. • Amount of α-Fe{sub 2}O{sub 3} particles on the perovskite surface grew with rising x values. - Abstract: Solid solutions with La{sub 1−x}Ca{sub x}FeO{sub 3−δ} (0 ≤ x ≤ 0.7) perovskite-like structure prepared via Pechini route have been investigated by using high resolution transmission electron microscopy and X-ray diffraction. Extended planar defects lying in (1 0 1) crystallographic planes and α-Fe{sub 2}O{sub 3} nanoparticles on the surface of perovskite microcrystals are characteristic of the samples under investigation. It was found that testing of the samples in catalytic deep CH{sub 4} oxidation process results in partial destruction of solid solutions with formation of planar defects in the bulk and α-Fe{sub 2}O{sub 3} particles on the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Photocatalytic degradation of methylene blue on Sn-doped titania nanoparticles synthesized by solution combustion route

Highlights: • Series of Sn-doped titania nanoparticles were prepared by solution combustion synthesis method. • Sn-doped titania nanoparticles were tested for degradation of MB under UV light irradiation. • The maximum Sn doping in the TiO{sub 2} lattice is found to be less than 10%. • The crystallite size decreases with increase in the Sn content. • The doping of Sn into TiO{sub 2} lattice hinders the recombination of electrons and holes thus enhance the photocatalytic activity. - Abstract: Series of tin-doped titania nanoparticles with varying tin content in the range 0–20 mol% have been prepared by solution combustion synthesis route using urea as a fuel. The structure, surface morphology and optical activity of Sn-doped TiO{sub 2} nanoparticles were investigated by various analytical techniques such as powder XRD, SEM, TEM, UV–vis and N{sub 2} adsorption study. The crystalline structures of the various phases were studied by rietveld refinement of the XRD data. The photocatalytic performance of Sn-doped titania nanoparticles were tested for degradation of MB under UV and visible light irradiation. The results reveal that the photocatalytic activity increases with increase in tin content which may be due to decrease in crystallite size with increase in surface area. The doping of Sn into TiO{sub 2} lattice hinders the recombination of electrons and holes thus enhance the quantum efficiency of photocatalytic reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Irradiation route to aqueous synthesis of highly luminescent ZnSe quantum dots and its function as a copper ion fluorescence sensor

Highlights: • Radiation chemical technique can provide a useful route for synthesis of ZnSe QDs. • Chelating nature of ethylene diamine is exploited for capping nanoparticles. • ZnSe QDs can be a suitable sensitive alternative to toxic cadmium-based system. • Cu(II) ion is probed by QDs in the presence of other physiologically relevant ions. - Abstract: Size-controlled synthesis of stable ZnSe QDs with narrow distribution in aqueous environment through conventional soft chemical method still poses a challenge. The proposed radiation assisted strategy demonstrates aqueous synthesis of stable, monodisperse and luminescent ZnSe QDs capped with chelating ethylene diamine under ambient conditions and at room temperature. Radiation chemical method facilitates in slow and in-situ release of selenium ion from sodium selenosulfate. The concentrations of precursors, such as zinc salt, selenium source, ethylene diamine and absorbed radiation (7–90 kGy) dose were optimized for obtaining good quality particles. Selective quenching of luminescence of as-synthesized quantum dots (QDs) by Cu{sup 2+} ions vis-à-vis other physiologically important cations provide evidence for use of ZnSe quantum dots as alternative to toxic Cd-based quantum dots to probe Cu{sup 2+} ions. The linear relation of ratio of loss in emission intensity as a function of concentration of Cu(II) indicates detection limit in nano-molar range.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Low temperature synthesized SrMoO4:Eu3+ nanophosphors functionalized with ethylene glycol: A comparative study of synthesize route, morphology, luminescence and annealing

Highlights: • Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). • For the first time, a comparative study of synthesized route, morphology, luminescence and annealing has been given in detail. • Mechanism involved in the luminescence has been discussed with the help of schematic representation, energy level diagram and chromaticity diagram. • The prepared phosphors are suitable for biological labeling due to their dispersible capacity in different liquids (ethanol, phosphate buffered saline and water). - Abstract: Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). The developed phosphor shows strong red photoluminescence emission via electric dipole {sup 5}D{sub 0} → {sup 7}F{sub 2} transition and other weak transitions ({sup 5}D{sub 1} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 3} and {sup 5}D{sub 0} → {sup 7}F{sub 4}) by using three excitation wavelengths of 260, 395 and 464 nm. For the first time, a comprehensive discussion have been given for indirect and direct excitation for as-prepared phosphor prepared by the three different techniques. The needle imbedded spherical particles, elliptical shaped particles and orange carpels shaped particles have been obtained from the urea, ammonia and hydrothermal methods, respectively. The calculated quantum yields are found to be 7.5, 6.1 and 9.3% for urea, ammonia and hydrothermal based synthesized phosphors, respectively. The prepared phosphors are suitable for biological labeling due to their dispersible ability in different liquids (ethanol, phosphate buffered saline and water).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

White LED based on CsPbBr3 nanocrystal phosphors via a facile two-step solution synthesis route

Highlights: • The work shows a simple and effective strategy to synthesize perovskite materials. • A LED with CsPbBr{sub 3} nanocrystals as green phosphors was fabricated. • Notable stability of the CsPbBr{sub 3} nanocrystals was verified. - Abstract: All-inorganic CsPbBr{sub 3} perovskite nanocrystals with mean size of ∼300 nm were synthesized via a facile two-step solution synthesis route. High-resolution transmission electron microscopy and X-ray diffraction characterizations confirm the as-prepared CsPbBr{sub 3} nanoparticles are single-crystals with good crystallinity, although a CsPb{sub 2}Br{sub 5} impure phase also exists in the final product. Power-/temperature-dependent and time-resolved photoluminescence measurements reveal the notable and stable excitonic emission feature of these CsPbBr{sub 3} nanocrystals. As a proof-of-concept demonstration, a LED with p-GaN/n-ZnO heterojunction as blue-violet excitation chip and CsPbBr{sub 3} nanocrystals as green phosphors, was fabricated and a white electroluminescence was achieved from this perovskite nanocrystals decorated LED.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Evaluation of solid solution formation between ThO2 and δ-Bi2O3 by molecular precursor route

Highlights: • Molecular precursor route for the solid solution evaluation of ThO{sub 2}-BiO{sub 1.5}. • Up to 60 mol % of Bi{sup 3+} could be dissolved in fluorite structured ThO{sub 2}. • Oxygen vacancies manifested as defect bands after Bi{sup 3+} incorporation. • Narrowing of direct band gap with increasing Bi{sup 3+} concentration. - Abstract: The high chelating ability of nitrilotriacetic acid has been advantageously utilized to prepare molecular precursors containing thorium and bismuth. This aided to determine the extent of solid solution formation between thoria and δ-Bi{sub 2}O{sub 3} in fluorite structure by calcining the precursors in air. Up to 60 atomic % of Bi{sup 3+} could be substituted for Th{sup 4+} in fluorite structure beyond which phase separation occurred. Slight increase in cubic lattice constant was observed with increasing bismuth content along with indication of increased tensile strain of lattice. Porous morphology and presence of bismuth in calcined samples were confirmed from SEM and EDX measurements. Defect bands emerged in the Raman spectra near 590 cm{sup −1} in addition to a fluorite band near 460 cm{sup −1} for the bismuth substituted samples. Intermediate energy states were formed by the substitution of Bi{sup 3+} for Th{sup 4+} arising possibly from oxygen vacancies and it resulted in narrowing of direct band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Microturbulence-mediated route for energetic ion transport and Alfvénic mode amplitude oscillations in tokamaks

The new regimes of Alfvén eigenmode (AE) induced fast ion transport in tokamak plasmas are reported, in which microturbulence plays the role of a mediator of fast ion relaxation. Coulomb collisional scattering alone leads to small AE amplitudes and does not reproduce the steady state regimes observed in experiments. We show that in nonlinear regimes the sufficiently large effective pitch angle scattering due to microturbulence can lead to steady state AE amplitude evolution. This indicates a new route for fast ion losses, which is beyond the scenarios described in “Energetic ion transport by microturbulence is insignificant in tokamaks”. As a result, microturbulence can significantly increase the amplitude of AEs in predictive simulations of burning plasma experiments such as ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Synthesis route attribution of sulfur mustard by multivariate data analysis of chemical signatures

A multivariate model was developed here to attribute samples to a synthetic method used in the production of sulfur mustard (HD). Eleven synthetic methods were used to produce 66 samples for model construction. Three chemists working in both participating laboratories took part in the production, with the aim to introduce variability while reducing the influence of laboratory or chemist specific impurities in multivariate analysis. A gas chromatographic/mass spectrometric data set of peak areas for 103 compounds was subjected to orthogonal partial least squares - discriminant analysis to extract chemical attribution signature profiles and to construct multivariate models for classification of samples. For one- and two-step routes, model quality allowed the classification of an external test set (16/16 samples) according to synthesis conditions in the reaction yielding sulfur mustard. Classification of samples according to first-step methodology was considerably more difficult, given the high purity and uniform quality of the intermediate thiodiglycol produced in the study. Model performance in classification of aged samples was also investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Common traffic routes for imported spermine and endosomal glypican-1-derived heparan sulfate in fibroblasts

Import of the polyamine spermine from the extracellular environment depends on the presence of cell surface heparan sulfate proteoglycans, such as glypican-1. This proteoglycan is internalized by endocytosis, releases its heparan sulfate chains in endosomes by a nitric oxide-, copper- and amyloid precursor protein-dependent mechanism, then penetrates the membrane and is transported to the nucleus and then to autophagosomes. This process is spontaneous or induced by ascorbate depending on the growth-state of the cell. Here, we have explored possible connections between the heparan sulfate traffic route and spermine uptake and delivery in wild-type and Tg2576 mouse fibroblasts. Cells were examined by deconvolution immunofluorescence microscopy. The antibodies used were specific for spermine, glypican-1-derived heparan sulfate, Rab7, nucleolin and a marker for autophagosomes. Endogenous immunostainable spermine was primarily associated with autophagosomes. When spermine synthesis was inhibited, imported spermine appeared in Rab7-positive endosomes. When ascorbate was added, heparan sulfate and spermine were transported to the nucleus where they colocalized with nucleolin. Spermine also appeared in autophagosomes. In a pulse-chase experiment, heparan sulfate and spermine were first arrested in late endosomes by actinomycin D treatment. During the chase, when arrest was abolished, heparan sulfate and spermine were both transported to the nucleus and targeted nucleolin. In amyloid precursor protein{sup -/-}-fibroblasts, ascorbate failed to induce release of heparan sulfate and spermine remained in the endosomes. We propose that cell surface glypican-1 carries spermine to the endosomes and that the released heparan sulfate carries spermine across the membrane into the cytosol and then to the nucleus.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid Identification of Synthetic Routes to Functional Metastable Phases Using X-ray Probed Laser Anneal Mapping (XPLAM) Time-Temperature Quench Maps

Many material systems have known or predicted functional phases that are metastable at standard temperature and pressure. While substantial advances have been made in the high-throughput and combinatorial synthesis of materials with a range of stoichiometries, investigation of thermal processing remains largely the domain of iterative uniform anneals or static gradients. Here we develop X-ray probed laser anneal mapping (XPLAM), a high throughput technique coupling spatially resolved X-ray diffraction with microsecond to millisecond laser gradient anneals to produce temperature–dwell–transformation (TDT) diagrams of the phase as a function of quench time and temperature. In addition to showing regimes where specific metastable phases form preferentially, TDT diagrams provide insight into the submillisecond kinetics of solid–solid phase transitions. This is a unique tool for mapping reaction pathways for metastable phases. As a first demonstration of XPLAM, we study Bi2O3, which has a rich set of polytypes, including the d-phase with an exceptionally high oxygen ion conductivity. We demonstrate the first annealing-driven synthesis of room temperature d-Bi2O3. We expect XPLAM to prove a powerful technique for rapid identification of synthetic routes to metastable phases and to generate the exhaustive data sets required for machine learning-guided exploration of materials processing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spatiotemporal Route to Understanding Metal Halide Perovskitoid Crystallization

Here, a spatiotemporal experimental route is reported for the antisolvent vapor diffusion crystal growth of metal halide perovskitoids. A computational analysis combining automated image capture and diffusion modeling enables the determination of the critical concentrations required for nucleation and crystal growth from a single experiment. Five different solvent systems and ten distinct organic ammonium iodide salts were investigated with lead iodide, from which nine previously unreported compounds were discovered. Automated image capture of the mother liquor and antisolvent vials was used to determine changes in solution meniscus positions and detect the nucleation event location. Matching the observations to a numerical solution of Fick's second law diffusion model enables the calculation of reactant, solvent, and antisolvent concentrations at both the time and position of the first stable nucleation and crystal growth. A machine learning model was trained on the resulting data, and it reveals solvent- and amine-specific crystallization tendencies. Solvent systems that interact more weakly with dissolved lead species promote crystallization, while those with stronger interactions can prevent crystallization through increased solubilities. Organic amines that interact more strongly with inorganic components and exhibit greater rigidity are more likely to be incorporated into crystalline products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A General Solution Route to Nanoporous Metal Oxide Films

Metal oxide semiconductors are of interest as efficient, stable, and low-cost photoanode materials for photoelectrochemical water splitting, but their characteristically poor charge transport properties remain a fundamental challenge to practical use. Nanoporous metal oxide films that feature open bicontinuous networks of nanocrystals and nanopores can overcome such inefficient charge transport to enable high-performance photoanodes. Here, this paper describes a general method to make high-quality nanoporous films of metal oxides by spin coating and calcining molecular inks that contain a porosity-generating block copolymer. Phase-pure nanoporous films of BiFeO 3 , FeWO 4 , WO 3 , Fe 2 O 3 , and TiO 2 serve to demonstrate the versatility of the approach. It is demonstrated that the crystallite size, film porosity, and film thickness can be independently tuned by adjusting the ink composition and film processing conditions. The method is extended to fabricate core–shell nanoporous films consisting of a nanoporous film coated in a thin shell of a second metal oxide, using WO 3 –BiVO 4 and BiFeO 3 –BiVO 4 as examples. Given its simplicity and flexibility, this solution-phase route should prove useful for making nanoporous films of many different materials for a variety of applications, including energy conversion and storage, catalysis, and chemical sensing.

coating materials↗
DOE OSTI2025

Advancing Sodium-Ion Battery Cathodes: A Low-Cost, Eco-Friendly Mechanofusion Route from TiO 2 Coating to Ti 4+ Doping

Layered oxide battery cathodes often require extra stabilization strategies, such as surface coating or doping, to mitigate side reactions and enhance longevity. Conventional methods such as aqueous deposition and atomic layer deposition are costly and environmentally unfriendly and even damage the original structure, especially for air-sensitive sodium-ion battery (SIB) cathodes. Herein, we introduce an all-dry mechanofusion technique that modifies hydroxide precursors with TiO 2 coating before sintering with a sodium source. Using advanced characterizations including X-ray diffraction, neutron diffraction, and solid-state nuclear magnetic resonance for structural insights, X-ray absorption spectroscopy to study metal valence states, and transmission X-ray microscopy for nanoscale visualization of nickel oxidation states, we verified that postsintering transforms TiO 2 surface coating into Ti doping, leading to improved Ni-oxidation homogeneity, modified charge compensation, and enhanced thermal stability. Electrochemical tests reveal superior performance in capacity retention, rate capability, and air stability for these modified cathodes, with pouch cells maintaining over 85% capacity after 650 cycles. This method presents a sustainable, cost-effective route for advanced SIB cathode development.

36 MATERIALS SCIENCE↗