Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLID PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Measurement of Thermal Conductivity in a Supercooled Hydrogel-Salt Complex Near Its Phase Transition

Solid-liquid phase transitions, i.e. solidification processes, have applications in data storage, development of novel thermoelectric materials, cooling of microelectronic substrates and air conditioning condensers. Standard analyses of solidification (Stefan problem) assume constant thermal properties of the solid and liquid sides. It is not known how these properties change across the spatial transition interface, though most studies report a discontinuity in the solid and liquid properties through the transition temperature [1]. When the phase transition releases enthalpy, recent research has shown if the phonon or electron transport time is of the same order of magnitude as the time scale of the atomic transformation, this increases the heat capacity of the solid material at temperatures near the phase transition temperature [2]. A fundamental understanding of the phase transition may help shed light on the molecular origins of supercooling and spontaneous nucleation, which will help with applications involving them. We report studies of supercooling and nucleation of sodium sulfate decahydrate, a salt hydrate which is of recent interest in thermal storage, and of a hydrogel-sodium sulfate complex which shows limited supercooling. We will also report the measurement of their thermal properties during the phase transition process. This will be done with a hot-wire setup which produces small temperature changes of the order of ~1 C.

crystallization, phase transformation, thermal con↗

Continuous optical in-situ pH monitoring during early hydration of cementitious materials

A luminescent sensor technique for pH analyses has been tested in cementitious media. The optical sensors monitor in-situ pH every 5 s during early hydration reactions over a period of 100 h from initial fluid up to consolidated stage. The pH development was analysed in calcium aluminate, calcium sulfoaluminate and OPC/slag cements up to a pH level of 13.3 and directly correlated with the heat of hydration. Thus tracing the dissolution and formation processes of solid phases via pH sensor monitoring is possible. This measurement technique enables the recording of continuous and highly reproducible pH data sets from slurries, pastes, and hardening materials leading to new vistas for individual (trans)formation pathways of solids, hydration and consolidation reactions in high alkaline cementitious systems.

36 MATERIALS SCIENCE↗

Propanal, an Interstellar Aldehyde - First Infrared Band Strengths and Other Properties of the Amorphous and Crystalline Forms

Chemical evolution in molecular clouds in the interstellar medium is well established, with the identification of over 200 molecules and molecular ions. Among the classes of interstellar organic compounds found are the aldehydes. However, laboratory work on the aldehydes has scarcely kept pace with astronomical discoveries as little quantitative solid-phase infrared (IR) data has been published on any of the aldehydes, and the same is true for important properties such as density, refractive indices, and vapor pressures. In this paper we examine the IR spectra of solid propanal (HC(O)CH2CH3, propionaldehyde), along with several physical properties, for both the amorphous and crystalline forms of the compound. The quantitative measurements we report, such as infrared intensities and optical constants, will be useful in laboratory investigations of the formation and evolution of propanal-containing ices, will serve as benchmark data for theoretical investigations, and will inform observational studies.

Yukiko Yagi Yarnall↗

Ineffectiveness of ultrasound at low frequency for treating per- and polyfluoroalkyl substances in sewage sludge

Concerns have been raised about per- and polyfluoroalkyl substances (PFAS) in sewage sludge given the urgent need of finding suitable disposal methods for sludge. Here in this study, we evaluated the effect of ultrasonication on PFAS changes in sewage sludge. It was revealed that although ultrasonication at 20 kHz increased the soluble chemical oxygen demand (SCOD) of treated sewage sludge, this technique was ineffective for degrading perfluoroalkyl acids (PFAAs) and their precursors. Ultrasonic treatment for longer time (>15 min) led to concentration increase of perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), and perfluorohexanoic acid (PFHxA) in the liquid phase, possibly due to their release from disrupted sludge flocs during cavitation. Adding permanganate (10 mM) to the ultrasonic system could also enhance the disruption of sludge particles, resulting in higher concentrations of PFOA and PFHxA in the solid phase and PFOA, PFHpA, PFHxA, and perfluorobutanesulfonic acid (PFBS) in the liquid phase. Overall, ultrasonic pretreatment at 20 kHz and 0.7 W/mL is unlikely to remove PFAS from sewage sludge. Instead, it could increase the risk of PFAS pollution upon final sludge disposal. Effective treatment technologies are thus demanded if PFAS in sludge are regulated.

54 ENVIRONMENTAL SCIENCES↗

A Limited-Ranged Two-Phase Iron Equation of State Model

This report describes the construction of a two-phase EOS for Fe that includes both (hcp) and liquid phases, and which is meant to be valid over the restricted range: V ϵ [4 : 7] °A 3 /atom, and T ϵ [1000 : 20000] K. It was recently used as the basis for a theoretical study of liquid → solid phase transformation kinetics in Fe which appeared in the Supplemental Material for a paper describing a series of NIF shock + ramp compression experiments aimed at constraining the high-P melt curve of Fe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the Hugoniot and shock-induced phase transition stress in wrought 17-4 PH H1025 stainless steel

Uniaxial strain, reverse-ballistic impact experiments were performed on wrought 17-4 PH H1025 stainless steel, and the resulting Hugoniot was determined to a peak stress of 25 GPa through impedance matching to known standard materials. The measured Hugoniot showed evidence of a solid–solid phase transition, consistent with other martensitic Fe-alloys. The phase transition stress in the wrought 17-4 PH H1025 stainless steel was measured in a uniaxial strain, forward-ballistic impact experiment to be 11.4 GPa. Linear fits to the Hugoniot for both the low and high pressure phase are presented with corresponding uncertainty. The low pressure martensitic phase exhibits a shock velocity that is weakly dependent on the particle velocity, consistent with other martensitic Fe-alloys.

36 MATERIALS SCIENCE↗

Thermally induced phase changes, lateral heterogeneity of the mantle, continental roots, and deep slab anomalies

Factors which influence the lateral heterogeneity in density and seismic velocity with depth in the upper earth mantle are discussed. It is emphasized that most of the increases in density and seismic velocity with depth are caused by pressure-induced solid-solid phase changes in the high-density high-velocity phases of mineral assemblage, due to variations in temperature. In particular, the ilmenite form of MgSiO3 and the gamma-spinel form of Mg2SiO4 have broad stability fields in cold mantle and are not stable in hotter mantle. It is emphasized that the density and velocity anomalies associated with temperature-induced phase changes in mineral assemblage must be taken into account in the thermal models of the slabs; when these effects are accounted for, the geoid and seismic anomalies associated with subducted slabs are consistent with slab confinement to the upper mantle and with layered models of mantle convection.

Anderson, Don L.↗

The effect of the London-van der Waals dispersion force on interline heat transfer

A theoretical procedure to determine the heat transfer characteristics of the interline region (junction of liquid-solid-vapor) from the macroscopic optical and thermophysical properties of the system is outlined. The analysis is based on the premise that the interline transport processes are controlled by the London-van der Waals dispersion force between condensed phases (solid and liquid). Numerical values of the dispersion constant are presented. The procedure is used to compare the relative size of the interline heat sink of various systems using a constant heat flux mode. This solution demonstrates the importance of the interline heat flow number, which is evaluated for various systems.

Wayner, P. C., Jr.↗

Laboratory studies of sticking coefficients and heterogeneous reactions important in the stratosphere

The discovery of ozone depletion during spring in the Antarctic stratosphere has received wide spread attention. Both meteorological and chemical mechanisms have been used in attempts to explain this observation. The chemical theory focused on the chlorofluoromethanes released into the atmosphere. However, gas-phase, homogeneous reactions alone in the model can not adequately explain such a depletion. Heterogeneous reactions on ice surfaces could be important in the Antarctic stratosphere. These reactions are thought to convert ClONO2 and N2O5 into HNO3 in the solid phase while Cl2, HOCl, and ClNO2 are released into the stratosphere as gas-phase products. The photolysis of Cl2, HOCl, and ClNO2, then produces active chlorine which subsequently removes ozone through several catalytic cycles, including the Cl2O2 mechanism. The polar stratospheric clouds are thought to consist of mixtures of water ice, nitric acid, and sulfuric acid. Condensation of HCl onto the PSC's could provide active surfaces for heterogeneous reactions.

Leu, Ming-Taun↗

A modified scheil approach for nucleation-dependent solidification pathways

As-solidified microstructures of near-eutectic alloys often contain multiple primary phases that are not expected from equilibrium phase diagrams. Such microstructures are caused by cooling-rate-dependent solidification pathways, a factor not captured by the Scheil–Gulliver model or variations thereof. Here, we present a model and algorithm that incorporate the critical nucleation undercooling for each solid phase into the Scheil–Gulliver model. We hypothesize that the non-equilibrium microstructure formation is primarily governed by a nucleation-competition mechanism. This mechanism accounts for both stable/metastable phase selection and primary-phase formation within eutectic regions driven by asymmetric nucleation barriers. The model is validated against a hypereutectic Al-Fe alloy, where it successfully reproduces the observed microstructural constituents, revealing the key dependencies of solidification microstructure on nucleation kinetics. Applicability to multicomponent systems is demonstrated through a hypereutectic Al–Fe–Si ternary alloy, where the model successfully predicts divorced eutectic microstructures and the associated oscillatory solidification pathways along univariant lines. As a result, the proposed framework establishes a nucleation-dependent computational approach for interpreting and predicting solidification microstructures.

Alloy design↗

Polymorphism and phase transitions in Na 2 U 2 O 7 from density functional perturbation theory

Polymorphism and phase transitions in sodium diuranate, Na 2 U 2 O 7 , are investigated with density functional perturbation theory (DFPT). Thermal properties of crystalline α-, β- and γ-Na 2 U 2 O 7 polymorphs are predicted from DFPT phonon calculations, i.e., the first time for the high-temperature γ-Na 2 U 2 O 7 phase (R$\bar{3}$ with combining macron]m symmetry). The standard molar isochoric heat capacities predicted within the quasi-harmonic approximation are C p (298.15K)= 219.4 and 220.9 J K -1 mol -1 mfor P21/a α-Na 2 U 2 O 7 and C2/m β-Na 2 U 2 O 7 , respectively. Gibbs free energy calculations reveal that α-Na 2 U 2 O 7 (P2 1 /a) and β-Na 2 U 2 O 7 (C2/m) are almost energetically degenerate at low temperature, with β-Na 2 U 2 O 7 becoming slightly more stable than α-Na 2 U 2 O 7 as temperature increases. Here these findings are consistent with XRD data showing a mixture of α and β phases after cooling of γ-Na 2 U 2 O 7 to room temperature and the observation of a sluggish α → β phase transition above ca. 600 K. A recently observed α-Na 2 U 2 O 7 structure with P21 symmetry is also shown to be metastable at low temperature. Based on Gibbs free energy, no direct β → γ solid-solid phase transition is predicted at high temperature, although some experiments reported the existence of such phase transition around 1348 K. This, along with recent experiments, suggests the occurrence of a multi-step process consisting of initial β-phase decomposition, followed by recrystallization into γ-phase as temperature increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From diamond to BC8 to simple cubic and back: Kinetic pathways to post-diamond carbon phases from metadynamics

Understanding the kinetic pathways connecting carbon polymorphs at multimegabar pressures remains a major unsolved problem in high-pressure physics. Here, we provide insights into the long-standing question of BC8 formation and stability by combining a state-of-the-art SNAP machine-learning interatomic potential with enhanced sampling via metadynamics, enabling direct access to transition mechanisms far beyond the reach of standard molecular dynamics. Our simulations show that carbon phase transformations are intrinsically complex, proceeding through multiple intermediate disordered and crystalline states governed by nontrivial kinetic ordering. We determine the upper pressure limit for BC8 formation and reveal that hexagonal diamond transforms to BC8 faster than cubic diamond—an unexpected and experimentally testable prediction. We also identify a 𝑃⁢222 carbon phase that becomes competitive with diamond and simple cubic above 1.8 TPa, and we demonstrate that BC8 may be quenched to ambient conditions at moderate temperatures. Altogether, these results establish a general and transferable framework for resolving kinetic pathways in solid-solid phase transitions and provide physical insights into carbon's complex high-pressure landscape.

36 MATERIALS SCIENCE↗

Analytic fits to atom-in-jellium shear modulus predictions

Fits to AJ shear modulus calculations from ρ0 to the limit of the corresponding AJ EOS table (usually 1000 ρ0), adjusted to reproduce STP shear modulus where possible. Fitting minimized the fractional difference, so low-pressure points would be reproduced accurately despite the wide-ranging tabulation. AJ calculations were at T=0. Isochoric variation G(T) has been small for all cases spot-tested so far, and may have either sign. The fitted equation usually matches the AJ data to within a few percent. Between numerical noise in the AJ calculation and probably-physical structure not captured by the equation, the deviation could be up to 20% in some places in most models, and 30% in a few. AJ does not capture structural phase transitions or phases stabilized by directional bonds, where the shear modulus may vary by a greater amount. Where possible, STP ρ,G were used as parameters, and low pressure AJ points were de-weighted or removed if necessary. Otherwise, such as where AJ fails to capture solid phases with a significantly different shear modulus, the AJ data were fitted as far down in pressure as possible, G0 was also fitted if necessary, and ρ0 was also adjusted if needed to keep G0>0. The resulting models are not intended for use at low pressure, though some are probably adequate for practical purposes

36 MATERIALS SCIENCE↗

The effect of the liquid-solid system properties on the interline heat transfer coefficient

A theoretical procedure to determine the heat transfer characteristics of the interline region of an evaporating meniscus using the macroscopic optical and thermophysical properties of the system is outlined. The analysis is based on the premise that the interline transport processes are controlled by the London-van der Waals forces between condensed phases (solid and liquid). The procedure is used to compare the relative size of the interline heat sink of various systems using a constant heat flux model. This solution demonstrates the importance of the interline heat flow number which is evaluated for various systems. The heat transfer characteristics of the decane-steel system are numerically compared with those of the carbon tetrachloride-quartz system.

Wayner, P. C., Jr.↗

The Evolution of the Deformation Substructure in a Ni-Co-Cr Equiatomic Solid Solution Alloy

The equiatomic NiCoCr alloy exhibits an excellent combination of strength and ductility, even greater than the FeNiCrCoMn high entropy alloy, and also displays a simultaneous increase in strength and ductility with decreasing the testing temperature. To systemically investigate the origin of the exceptional properties of NiCoCr alloy, which are related to the evolution of the deformation substructure with strain, interrupted tensile testing was conducted on the equiatomic NiCoCr single-phase solid solution alloy at both cryogenic and room temperatures at five different plastic strain levels of 1.5%, 6.5%, 29%, 50% and 70%. The evolution of deformation substructure was examined using electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD), conventional transmission electron microscopy (CTEM), diffraction contrast imaging using STEM (DCI-STEM) and atomic resolution scanning transmission electron microscopy. While the deformation substructure mainly consisted of planar dislocation slip and the dissociation of dislocations into stacking faults at small strain levels (≤6.5%), at larger strain levels, additional substructures including nanotwins and a new phase with hexagonal close packed (HCP) lamellae also appeared. The volume fraction of the HCP lamellae increases with increasing deformation, especially at cryogenic temperature. First principles calculations at 0 K indicate that the HCP phase is indeed energetically favorable relative to FCC for this composition. The effects of the nanotwin and HCP lamellar structures on hardening rate and ductility at both cryogenic and room temperature are qualitatively discussed.

Twinning↗

Water content of carbon dioxide at hydrate forming conditions

There is an interest to ensure sub-saturated water content in lines containing carbon dioxide in applications such as enhanced oil recovery and carbon sequestration, to reduce risks of hydrate blockage and corrosion. The water content of carbon dioxide at various temperatures and pressures has been measured in the past, but there is no consistent set of measurements that could be used for carbon dioxide storage and transportation design work. The solubility of water in a carbon dioxide rich gas phase at hydrate forming conditions was measured in this work. Pressures ranged from 12.06 to 29.30 bar along two isotherms, 1 °C and -7 °C, all within the gaseous carbon dioxide and hydrate stability zone. For the first time in these types of measurements, the solid phase was also characterized and confirmed to be carbon dioxide hydrate via X-ray computed tomography, simultaneous with water content measurements of the gas phase. Once carbon dioxide hydrate conversion had reached a maximum value (65% estimated by X-ray computed tomography), the equilibrium water content was measured. Prior to reaching this maximum carbon dioxide hydrate conversion, the water content in carbon dioxide was observed to decrease as liquid water converted to carbon dioxide hydrate. Furthermore, this slow conversion to hydrate, metastability of the hydrate phase, or unexpected phases may be responsible for the large discrepancy between prior data sets for similar carbon dioxide water content measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogenous catalysis for oxygen tolerant photoredox atom transfer radical polymerization and small-molecule dehalogenation

Heterogeneous photocatalysts (PCs) have garnered attention for their sustainability and cost-effectiveness. Despite the existence of various types of these PCs, their synthesis often involves complex, multi-step procedures and laborious purification. Herein, we propose a simple method for attaching small-molecule photocatalytic species onto crosslinked 3-D polymer networks as insoluble scaffolds to create robust heterogeneous PCs. The highly swellable poly(ethylene glycol)-based ChemMatrix (CM) resin, known for its amphiphilic properties and high functional group loading, facilitated the covalent immobilization of the photoredox dye Eosin Y (EY), but also streamlined functionalization with Ir( III ) complexes. The resulting heterogeneous CM-EY demonstrated efficient photocatalytic performance in open-to-air dual photoredox catalysis of atom transfer radical polymerization (photo-ATRP) under green light. This was confirmed by the well-controlled synthesis of polymers with molecular masses ranging from 20 kDa to 300 kDa and low dispersities. Furthermore, CM-EY exhibited excellent photostability and recyclability over multiple cycles of ATRP. The heterogeneous catalysis of photo-ATRP provided high temporal control and enabled benign conditions for synthesizing protein-polymer hybrids (PPH). When combined with the initiator-modified CM (CM-BIB), CM-EY facilitated the solid-phase synthesis of homopolymers and block copolymers with recyclable performance. However, the coordinatively bound Ir@CM showed decreased catalytic activity and efficiency toward photoredox dehalogenation due to the leaching of active species during recycling. This study highlights the advantages of the covalent linking of catalysts to solid supports over non-covalent interactions, underscoring the potential of functionalized polymer resin as a promising scaffold. Such an approach offers customization and tunability, presenting opportunities for innovation in green chemistry.

Kapil, Kriti↗