Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Ethanol oxidation on metal oxide-supported platinum catalysts

Ethanol is a renewable fuel that can be used as an additive to gasoline (or its substitute) with the advantage of octane enhancement and reduced carbon monoxide exhaust emissions. However, on Ethanol is a renewable fuel that can be used as an additive to gasoline (or its substitute) with the advantage of octane enhancement and reduced carbon monoxide exhaust emissions. However, on the standard three-way catalysts, the conversion of unburned ethanol is low because both ethanol and some of its partially oxidized derivatives are highly resistant to oxidation. A combination of first-principles density-functional theory (DFT) based calculations and in-situ diffuse reflectance infrared spectroscopy (DRIFTS) analysis was applied to uncover some of the fundamental phenomena associated with ethanol oxidation on Pt containing catalysts. In particular, the objective was to analyze the role of the oxide (i.e., ?-Al2O3 or SiO2) substrate on the ethanol oxidation activity. The results showed that Pt nanoparticles trap and accumulate oxygen at their surface and perimeter sites and play the role of “stoves” that burn ethanol molecules and their partially oxidized derivatives to the “final” products. The ?-Al2O3 surfaces provided higher mobility of the fragments of ethanol molecules than the SiO2 surface and hence increased the supply rate of these objects to the Pt particles. This will in turn produce a higher conversion rate of unburned ethanol.and some of its partially oxidized derivatives are highly resistant to oxidation. A combination of first-principles density-functional theory (DFT) based calculations and in-situ diffuse reflectance infrared spectroscopy (DRIFTS) analysis was applied to uncover some of the fundamental phenomena associated with ethanol oxidation on Pt containing catalysts. In particular, the objective was to analyze the role of the oxide (i.e., ?-Al2O3 or SiO2) substrate on the ethanol oxidation activity. The results showed that Pt nanoparticles trap and accumulate oxygen at their surface and perimeter sites and play the role of “stoves” that burn ethanol molecules and their partially oxidized derivatives to the “final” products. The ?-Al2O3 surfaces provided higher mobility of the fragments of ethanol molecules than the SiO2 surface and hence increased the supply rate of these objects to the Pt particles. This will in turn produce a higher conversion rate of unburned ethanol.

09 BIOMASS FUELS↗

Rate and Selectivity Control in Thioether and Alkene Oxidation with H 2 O 2 over Phosphonate-Modified Niobium(V)-Silica Catalysts

Supported metal oxide catalysts are versatile materials for liquid-phase oxidations, including alkene epoxidation and thioether sulfoxidation with H2O2. Periodic trends in H2O2 activation was recently demonstrated for alkene epoxidation, highlighting Nb-SiO2 as a more active and selective catalyst than Ti-SiO2. Three representative catalysts are studied consisting of NbV, TiIV, and ZrIV on silica, each made through a molecular precursor approach that yields highly dispersed oxide sites, for thioanisole oxidation by H2O2. Initial rates trend Nb>Ti>>Zr, as for epoxidation, and Nb outperforms Ti for a number of other thioethers. In contrast, selectivity to sulfoxide vs. sulfone trends Ti>Nb>>Zr at all conversions. Modifying the Nb-SiO2 catalyst with phenylphosphonic acid does not completely remove sulfoxidation reactivity, as it did for photooxidation and epoxidation, and results in an unusual material active for sulfoxidation but neither epoxidation nor overoxidation to the sulfone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Blow-off momentum from melt and vapor in nuclear deflection scenarios

For Earth-impacting objects that are large in size or have short warning times nuclear explosives are an effective threat mitigation response. Nuclear-based deflection works by means of conservation of momentum: as material is heated by incoming photons and neutrons it is ejected from the body which imparts momentum to the remaining mass of the asteroid. Predicting the complete response of a particular object is difficult, since the ejecta size and velocity distributions rely heavily on the unknown, complicated internal structure of the body. However, lower bounds on the blow-off momentum can be estimated using the melted and vaporized surface material. In this paper, we model the response of a one-dimensional SiO2 surface to monoenergetic soft X-ray, hard X-ray and neutron sources using Arbitrary Lagrangian–Eulerian radiation/hydrodynamic simulations. Errors in the blow-off momentum due to our hydrodynamic mesh resolution are quantified and inform zone sizing that balances numerical discretization error with computational efficiency. We explore deposited energy densities ranging from 1.1 to 200 times the melt energy density for SiO2, and develop an approximate relation that gives the mesh resolution needed for a desired percent error in the blow-off momentum as a function of deposited energy density and melt depth. Using these mesh constraints, the response of our one-dimensional SiO2 surface to the energy sources is simulated, and lower bounds are placed on the melt/vapor blow-off momentum as a function of deposited energy density and source energy type.

79 ASTRONOMY AND ASTROPHYSICS↗

Probing properties of the interfacial perimeter sites in TiO x /Au/SiO 2 with 2-propanol decomposition

The decomposition of 2-propanol was studied over SiO2, SiO2 with an overlayer of TiO2 (Ti/SiO2), Au/SiO2, and Au/SiO2 with an overlayer of TiO2 (Ti/[Au/SiO2]) at 170–190 °C. There was no reaction on SiO2. Propene was the only product on Ti/SiO2, and its rate of formation increased proportionally with the Ti content. Acetone was the major product (selectivity 65–99%) on all Au-containing catalysts. Its rate of formation also increased with Ti loading. In addition, small amounts of propene were also formed on Ti/[Au/SiO2] the rate of which increased with Ti loading. Characterization of the catalysts with N2 adsorption, STEM, DR-UV-vis spectroscopy, XPS, XANES and EXAFS suggested that the Ti formed an amorphous TiO2 overlayer on the catalyst. At high Ti loadings (4–5 wt.%), there were patches of thick porous TiO2 layer, and some microdomains of crystalline TiO2 could be detected. Au was present as 1–3 nm nanoparticles on all catalysts, before and after used in reaction. Only Lewis acid sites were detected based on results from pyridine adsorption, and their quantities increased with Ti loading. Based on the comparison of reaction rates, the dependence of the kinetics on 2-propanol partial pressure, the apparent activation energies, and the effect of co-feeding O2 among different catalysts, it was concluded that propene was formed on the TiO2 overlayer, acetone was formed primarily at the Au-TiO2 interfacial perimeter sites, and α-C-H bond breaking preceding acetone formation was more facile on Au at the interfacial site than other surface Au atoms. Implication of these results to the selective acetone formation in the oxidation of propane in the presence of a O2/H2 mixture was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrodeoxygenation of phenolic compounds to cycloalkanes over supported nickel phosphides

SiO2, HZSM-5 and Al2O3 were used to support nickel phosphides to prepare hydrodeoxygenation (HDO) catalysts. The nickel loading was kept at 20 wt% while the Ni/P molar ratio was varied among 3, 2, and 1 in the preparation by incipient wetness impregnation. XRD characterization revealed that Ni3P, Ni12P5, and Ni2P as the major crystal phases were obtained at Ni/P ratio of 3, 2, and 1, respectively, on SiO2 and HZSM-5. When Al2O3 was used as the support, nickel metal rather than nickel phosphides was generated. Among SiO2-supported nickel phosphides, Ni3P exhibited highest hydrogenation activity and catalytic performance in phenol HDO. Ni3P/HZSM-5 showed the high catalytic performance in HDO of phenol as well as catechol and o-cresol, with Ni3P as the hydrogenation site and the acid sites in HZSM-5 zeolite as the dehydration site. The strong acidity in HZSM-5 also facilitated the isomerization of cycloalkanes at elevated temperatures.

Hydrodeoxygenation, phenolic compound, nickel phos↗

Tantalum Clusters Supported on Silica-Alumina: Influence of Support Composition and Chemistry on Cluster Structure

Small cationic tantalum clusters were prepared on the surfaces of SiO2, silica-aluminas, and ?-Al2O3 supports by treating physisorbed pentabenzyltantalum at 523 K for 24 h in flowing H2. The rate of decomposition and the products formed in the decomposition of pentabenzyltantalum are dependent on the support composition. When the support was SiO2, the evolved products were mainly biphenyl and a small amount of toluene, indicating that the Ta-C bond in pentabenzyltantalum was activated. As the alumina content of the support increased, diphenylmethane, benzene, and ethylene were increasingly formed, and these products show that the activation of the C-C bonds linking the C atoms of methyl groups to the aromatic rings of the benzyl ligands was facilitated. Infrared spectra of the surface species and mass spectra of the effluents formed during the treatment show that the composition of the support had significant influence on the decomposition of pentabenzyltantalum, and the chemistry is inferred to be related to the electron-donor properties of the supports. Extended X-ray absorption fine structure (EXAFS) spectra recorded at the Ta LIII edge indicate the formation of clusters with a Ta-Ta first-shell coordination number of 3, and images obtained by scanning transmission electron microscopy (STEM) confirm the presence of such small clusters. X-ray absorption near edge structure (XANES) data indicate that the formal oxidation state of the tantalum in the clusters decreased from 3.0 to 2.6 as the support was changed from SiO2 to silica-aluminas to ?-Al2O3. The data suggest that the tantalum clusters were anchored to the supports via bridging O atoms. The EXAFS data show that the support composition had little influence on the cluster structure.

36 MATERIALS SCIENCE↗

Characterization of core–shell MOF particles by depth profiling experiments using on-line single particle mass spectrometry

Materials with core-shell structures have distinct properties that lend themselves to a variety of potential applications. Characterization of small particle core-shell materials presents a unique analytical challenge. Herein, single particles of solid-state materials with core-shell structures were measured using on-line aerosol time-of-flight mass spectrometry (ATOFMS). Laser 'depth profiling' experiments verified the core-shell nature of two known core-shell particle configurations (< 2 mu m diameter) that possessed inverted, complimentary core-shell compositions (ZrO2@SiO2 versus SiO2@ZrO2). The average peak area ratios of Si and Zr ions were calculated to definitively show their core-shell composition. These ratio curves acted as a calibrant for an uncharacterized sample - a metal-organic framework (MOF) material surround by silica (UiO-66(Zr)@SiO2; UiO = University of Oslo). ATOFMS depth profiling was used to show that these particles did indeed exhibit a core-shell architecture. The results presented here show that ATOFMS can provide unique insights into core-shell solid-state materials with particle diameters between 0.2-3 mu m.

36 MATERIALS SCIENCE↗

Inserting a Low-Refractive-Index Dielectric Rear Reflector into PERC Cells: Challenges and Opportunities

One of the simplest and most effective ways to reduce the operating temperature of photovoltaic systems in the field is to reflect unusable, 'sub-bandgap' light with energies below the cell absorber's bandgap energy. In this work, low-refractive index SiO2 nanoparticle films inserted between c-Si wafers and metal electrodes significantly increase the reflectance of sub-bandgap light in fabricated test structures. These films are then integrated into the standard PERC fabrication sequence, revealing that the reflection benefits remains after some processing steps but are lost in certain conditions. The SiO2 nanoparticle films are easily ablated during laser contact opening, but are undesirably etched during post-laser cleaning. After Al metallization, the fully fabricated devices show enhanced sub-bandgap reflection when annealed at moderate temperatures, but energy-dispersive X-ray spectroscopy shows that high-temperature firing causes unwanted Al penetration into the SiO2 nanoparticle film, compromising reflection.

14 SOLAR ENERGY↗

Photonic ring resonator notch filters for astronomical OH line suppression

Photonic ring resonator arrays used as notch filters are a promising novel solution to improve the signal-to-noise ratio of ground-based astronomical observations by suppressing OH emission lines in the near-infrared (NIR) wavelength range (0.9-2.5 μm). We aim to fabricate a series of ring resonators connected by a waveguide, each with its resonance wavelength and full-width-half-maximum (FWHM) matched with one of the OH emission lines. The fundamental structure of ring resonator-based notch filters is a ring resonator evanescently coupled to a waveguide. Due to the optical loss of the ring resonator, the transmission of light through the waveguide will be suppressed at the resonance wavelength of the ring resonator. The degree of suppression can be controlled by varying the coupling strength between the waveguide and the ring resonator, while the resonance wavelength can be controlled by the geometry and size of the ring. However, since a single ring resonator has multiple modes each with a different wavelength separated by its free spectral range (FSR), the additional suppression at other wavelengths may undermine the signal. Therefore, the ideal FSR off the ring resonators needs to be larger than the measurement window. For this application, we aim the FSR to be 1 larger than 30 nm . Our initial measurement results revealed two major challenges for this application. First, the FSR of the ring resonators is limited by the bending loss of ring resonators. In a standard 220 nm silicon-on-insulator material platform, the FSR of ring resonators cannot exceed 30 nm; Second, due to the wafer thickness variation and fabrication inaccuracy, the achievable accuracy in the resonance wavelength of a fabricated single ring resonator is only ~1.5 nm. In this work, we report our novel solutions to the above two challenges. For the first one, we have developed a novel structure based on the Vernier effect to greatly raise the FSR of ring resonators. Serially coupled Vernier ring structures is a typical approach to increase the FSR without encountering bending loss, but it requires restrictive matching of the coupling and optical loss of the rings and any imperfect matching can result in even noisier signals. On the contrary, our structure, as shown in shown in Fig. 1, does not require the restrictive matching. The signals of two output ports in our structure marked in Fig. 1 will be added together to form the final output signal, and Fig. 2 shows the finite-difference time-domain (FDTD) simulation results of the final output signal. As can be seen, the FSR of the entire structure is well-beyond 60 nm with little noise at other wavelengths. For the second one, we have developed an easy-to-implement method to permanently tune the resonance wavelengths of ring resonators within 0.1 nm accuracy. The tuning mechanism is based on the property of hydrogen silsesquioxane (HSQ) resist. As a negative tone electron beam resist, HSQ upon exposure will cross-link and eventually form SiO2. The refractive 2 index of HSQ resist and formed SiO2 are slightly different , enabling the tuning. By having a thin layer of HSQ resist on top of ring resonator structures followed by SiO2 cladding, the resonance wavelengths of ring resonators can be post-tuned Advances in Optical Astronomical Instrumentation 2019, edited by Simon Ellis, Céline d'Orgeville, Downloaded From: https://www.spiedigitallibrary.org/conference-proceedings-of-spie on 23 Sep 2020 Terms of Use: https://www.spiedigitallibrary.org/terms-of-use through electron beam exposure. We have found that, within 5 nm tuning range, the resonance wavelength shift and dosage applied obeys a linear relationship. So a simple calibration beforehand can result in resonance wavelength tuning within 0.1 nm accuracy. The transmission spectra of a 3-ring device before and after tuning is shown in Fig. 3.

Astronomical optics↗

Electron spin resonance spectroscopy investigation of ion beam sputtered HfO 2 and SiO 2 thin films

In this work we use electron spin resonance (ESR) spectroscopy to investigate defects in dual ion beam sputtered HfO2 and SiO2 films. "As-grown" SiO2 films exhibit an ESR feature consistent with an E' center associated with an oxygen vacancy previously reported. A similar feature with axial symmetry is seen in HfO2 films. The defect giving rise to the HfO2 ESR feature is distributed throughout the film. In addition, post process annealing of HfO2 and SiO2 films greatly reduces these defects.

Langdon, B.↗

Materials Data on Si6O13 by Materials Project

(SiO2)12O2 is Low Tridymite-like structured and crystallizes in the hexagonal P6/mcc space group. The structure is three-dimensional and consists of two hydrogen peroxide molecules and one SiO2 framework. In the SiO2 framework, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. There are four inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the second O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the third O site, O is bonded in a linear geometry to two equivalent Si atoms. In the fourth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si17CO34 by Materials Project

C(SiO2)17 is beta Tridymite-derived structured and crystallizes in the cubic Fd-3m space group. The structure is three-dimensional and consists of eight methane molecules and one SiO2 framework. In the SiO2 framework, there are three inequivalent Si sites. In the first Si site, Si is bonded to four equivalent O atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.60 Å. In the second Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.60 Å) and three longer (1.61 Å) Si–O bond length. In the third Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. There are four inequivalent O sites. In the first O site, O is bonded in a linear geometry to two Si atoms. In the second O site, O is bonded in a linear geometry to two equivalent Si atoms. In the third O site, O is bonded in a linear geometry to two Si atoms. In the fourth O site, O is bonded in a linear geometry to two equivalent Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si28O61 by Materials Project

(SiO2)56(O2)5 is Low Tridymite-like structured and crystallizes in the monoclinic P2_1/m space group. The structure is three-dimensional and consists of two hydrogen peroxide molecules, six water molecules, and one SiO2 framework. In the SiO2 framework, there are fourteen inequivalent Si sites. In the first Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the second Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the third Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.62 Å. In the fourth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the fifth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the sixth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the seventh Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the eighth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the ninth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the tenth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the eleventh Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the twelfth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the thirteenth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the fourteenth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. There are thirty-one inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the second O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the third O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the fourth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the fifth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the sixth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the seventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eighth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the ninth O site, O is bonded in a linear geometry to two equivalent Si atoms. In the tenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eleventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twelfth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the thirteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the fourteenth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the fifteenth O site, O is bonded in a linear geometry to two Si atoms. In the sixteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the seventeenth O site, O is bonded in a linear geometry to two Si atoms. In the eighteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the nineteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twentieth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-first O site, O is bonded in a linear geometry to two Si atoms. In the twenty-second O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-third O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-fourth O site, O is bonded in a linear geometry to two Si atoms. In the twenty-fifth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-sixth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the twenty-seventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-eighth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-ninth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the thirtieth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the thirty-first O site, O is bonded in a bent 150 degrees geometry to two Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si17O37 by Materials Project

(SiO2)34(O2)3 is Low Tridymite-like structured and crystallizes in the monoclinic C2/m space group. The structure is three-dimensional and consists of twelve water molecules and one SiO2 framework. In the SiO2 framework, there are eleven inequivalent Si sites. In the first Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.62–1.64 Å. In the second Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the third Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.64 Å. In the fourth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the fifth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the sixth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.64 Å. In the seventh Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the eighth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.61 Å) and one longer (1.63 Å) Si–O bond length. In the ninth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.63 Å. In the tenth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.64 Å. In the eleventh Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.64 Å) Si–O bond length. There are twenty-one inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the second O site, O is bonded in a linear geometry to two equivalent Si atoms. In the third O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the fourth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the fifth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the sixth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the seventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eighth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the ninth O site, O is bonded in a linear geometry to two equivalent Si atoms. In the tenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eleventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twelfth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the thirteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the fourteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the fifteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the sixteenth O site, O is bonded in a bent 120 degrees geometry to two Si atoms. In the seventeenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eighteenth O site, O is bonded in a distorted bent 120 degrees geometry to two Si atoms. In the nineteenth O site, O is bonded in a linear geometry to two Si atoms. In the twentieth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-first O site, O is bonded in a bent 150 degrees geometry to two Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si9C10NO18 by Materials Project

(C)9CN(SiO2)9 is Low Tridymite-derived structured and crystallizes in the monoclinic Cm space group. The structure is three-dimensional and consists of six ethyne molecules, four hydrogen cyanide molecules, eighteen methane molecules, two propane molecules, and one SiO2 framework. In the SiO2 framework, there are nine inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. In the third Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the fourth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.62–1.64 Å. In the fifth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.62–1.64 Å. In the sixth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the seventh Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the eighth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the ninth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. There are twenty-one inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the seventh O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eighth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the tenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eleventh O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the twelfth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the thirteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fourteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fifteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the sixteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the seventeenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eighteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the nineteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the twentieth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the twenty-first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ca(Si9O19)2 by Materials Project

Ca(SiO2)18O2 is Low Tridymite-derived structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional and consists of four water molecules and one Ca(SiO2)18 framework. In the Ca(SiO2)18 framework, Ca is bonded to six equivalent O atoms to form distorted CaO6 pentagonal pyramids that share corners with twelve equivalent SiO4 tetrahedra. All Ca–O bond lengths are 2.88 Å. There are two inequivalent Si sites. In the first Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.60–1.63 Å. In the second Si site, Si is bonded to four O atoms to form SiO4 tetrahedra that share a cornercorner with one CaO6 pentagonal pyramid and corners with four SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.67 Å. There are six inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the second O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the third O site, O is bonded in a 2-coordinate geometry to one Ca and two equivalent Si atoms. In the fourth O site, O is bonded in a linear geometry to two equivalent Si atoms. In the fifth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the sixth O site, O is bonded in a bent 150 degrees geometry to two Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si17NO34 by Materials Project

(SiO2)34N2 is beta Tridymite-derived structured and crystallizes in the cubic Fd-3m space group. The structure is three-dimensional and consists of eight ammonia molecules and one SiO2 framework. In the SiO2 framework, there are three inequivalent Si sites. In the first Si site, Si is bonded to four equivalent O atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.59 Å. In the second Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.60 Å) and three longer (1.61 Å) Si–O bond length. In the third Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. There are four inequivalent O sites. In the first O site, O is bonded in a linear geometry to two equivalent Si atoms. In the second O site, O is bonded in a linear geometry to two Si atoms. In the third O site, O is bonded in a linear geometry to two Si atoms. In the fourth O site, O is bonded in a linear geometry to two equivalent Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on KSi4O9 by Materials Project

(K(SiO2)4)2O2 crystallizes in the hexagonal P6/mmm space group. The structure is three-dimensional and consists of one water molecule and one K(SiO2)4 framework. In the K(SiO2)4 framework, K is bonded to twelve equivalent O atoms to form KO12 cuboctahedra that share edges with six equivalent KO12 cuboctahedra and edges with twelve equivalent SiO4 tetrahedra. All K–O bond lengths are 3.09 Å. Si is bonded to four O atoms to form SiO4 tetrahedra that share corners with four equivalent SiO4 tetrahedra and edges with three equivalent KO12 cuboctahedra. There is one shorter (1.60 Å) and three longer (1.64 Å) Si–O bond length. There are two inequivalent O sites. In the first O site, O is bonded in a linear geometry to two equivalent Si atoms. In the second O site, O is bonded in a 2-coordinate geometry to two equivalent K and two equivalent Si atoms.

36 MATERIALS SCIENCE↗