Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sound”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Sound generated in the vicinity of the trailing edge of an upper surface blown flap

Far-field noise data indicated that for practical upper surface blown flap configurations, the noise radiated below the flap is dominated by the noise generated in the vicinity of the trailing edge. Sound field by turbulent mixing in the trailing edge wake is investigated experimentally and theoretically. Hot-wire measurements were made downstream of the trailing edge to determine the gross turbulence mixing characteristics of the flow. This information is used as input to a theoretical analysis of the sound field. Favorable agreement is found between predicted and measured far-field noise directivities at various frequencies and noise power spectra at various directions.

Tam, C. K. W.↗
NASA NTRS1976

Preliminary evaluation of Nimbus-6 sounding data

Preliminary results on Nimbus-6 moisture and temperature soundings are discussed. The satellite takes readings of cloud-tracked winds and temperatures (with vertical resolution) in microwave and IR (15 micron and 4 micron) channels. The data are compared with ground-based radiosonde data. Isotherm patterns and thickness patterns derived from satellite data and radiosonde data are compared, as well as data on precipitable water. Satellite soundings are found to present a realistic picture of thermal and moisture fields in the vicinity of large-scale disturbances, and can be useful in initialization for large-scale numerical prediction models when properly combined with data from other sources. Limitations in vertical resolution are noted.

Tracton, M. S.↗
NASA NTRS1976

Effects of high subsonic flow on sound propagation in a variable-area duct

The propagation of sound in a converging-diverging duct containing a quasi-one-dimensional steady flow with a high subsonic throat Mach number was studied. The behavior of linearized acoustic theory at the throat of the duct was shown to be singular. This singularity implies that linearized acoustic theory is invalid. The explicit singular behavior was determined and used to sketch the development (by the method of matched asymptotic expansions) of a nonlinear theory for sound propagation in a sonic throat region.

Callegari, A. J.↗
NASA NTRS1976

Experimental determination of sound and high-speed flow interaction

A facility that was used to measure the interaction of flow with sound at high Mach numbers is described. Four inlets with different area variations (or axial gradients) were tested. Sound of selected frequencies and modes (0,0), (1,0), (2,0) was generated with eight circumferential acoustic drivers.

Lumsdaine, E.↗
NASA NTRS1976

Some factors influencing radiation of sound from flow interaction with edges of finite surfaces

Edges of surfaces which are exposed to unsteady flow cause both strictly acoustic effects and hydrodynamic effects, in the form of generation of new hydrodynamic sources in the immediate vicinity of the edge. An analytical model is presented which develops the explicit sound-generation role of the velocity and Mach number of the eddy convection past the edge, and the importance of relative scale lengths of the turbulence, as well as the relative intensity of pressure fluctuations. The Mach number (velocity) effects show that the important paramater is the convection Mach number of the eddies. The effects of turbulence scale lengths, isotropy, and spatial density (separation) are shown to be important in determining the level and spectrum of edge sound radiated for the edge dipole mechanism. Experimental data is presented which provides support for the dipole edge noise model in terms of Mach number (velocity) scaling, parametric dependence on flow field parameter, directivity, and edge diffraction effects.

Hayden, R. E.↗
NASA NTRS1977

Finite-difference theory for sound propagation in a lined duct with uniform flow using the wave envelope concept

Finite difference equations are derived for sound propagation in a two dimensional, straight, soft wall duct with a uniform flow by using the wave envelope concept. This concept reduces the required number of finite difference grid points by one to two orders of magnitude depending on the length of the duct and the frequency of the sound. The governing acoustic difference equations in complex notation are derived. An exit condition is developed that allows a duct of finite length to simulate the wave propagation in an infinitely long duct. Sample calculations presented for a plane wave incident upon the acoustic liner show the numerical theory to be in good agreement with closed form analytical theory. Complete pressure and velocity printouts are given to some sample problems and can be used to debug and check future computer programs.

Baumeister, K. J.↗
NASA NTRS1977

Sound-tube measurements of the relaxation frequency of moist nitrogen

At audible frequencies, the vibrational relaxation of nitrogen contributes significantly to the absorption of sound in still air. The accurate measurement of the humidity dependence of the relaxation frequency of nitrogen, as yet, has eluded careful measurement due to the difficulty in measuring small absorption at low frequencies. Recently, equipment has been constructed for measuring sound absorption in air as a function of humidity over the frequency range from 4 to 100 kHz. In the experiment described here, the temperature and humidity range of this equipment has been extended so that it can be used to study the relaxation absorption in nitrogen at temperatures from 311 K to 418 K. The results indicate that, over this temperature range, the frequency of maximum absorption in moist nitrogen, f, can be given by f/P = 260 x h, Hz/atm, where h is the percent mole fraction of water, and P is the pressure in atm. To the accuracy of the measurements reported here, f is independent of temperature over the range of temperatures at which the measurements were made.

Chang, D.↗
NASA NTRS1977

Nonlinear effects on sound in nearly sonic duct flows

A nonlinear theory for sound propagation in nearly sonic flows in variable area ducts is outlined. The theory is based on a quasi-one-dimensional model and the use of matched asymptotic expansions. The problem of an acoustic source located in the throat region of a duct with a converging section is treated. It is shown that the near-sonic region has a marked nonlinear effect on sound propagation in the duct.

Callegari, A. J.↗
NASA NTRS1977

The parabolic approximation for sound propagation in a stratified moving medium

Propagation of sound in a stratified moving medium is discussed through an extension of the parabolic approximation to the acoustic equations of motion for short wavelengths. The parabolic approximation is related to the theory of geometric acoustics, and it is shown that it yields an improvement in accuracy over geometric theory. Also, the approximation corrects cumulative failures of geometric theory which occur when sound propagates many wavelengths from its source. The theory is illustrated by application to simple examples of quasi-plane wave propagation.

Myers, M. K.↗
NASA NTRS1977

Method of fan sound mode structure determination

A method for the determination of fan sound mode structure in the Inlet of turbofan engines using in-duct acoustic pressure measurements is presented. The method is based on the simultaneous solution of a set of equations whose unknowns are modal amplitude and phase. A computer program for the solution of the equation set was developed. An additional computer program was developed which calculates microphone locations the use of which results in an equation set that does not give rise to numerical instabilities. In addition to the development of a method for determination of coherent modal structure, experimental and analytical approaches are developed for the determination of the amplitude frequency spectrum of randomly generated sound models for use in narrow annulus ducts. Two approaches are defined: one based on the use of cross-spectral techniques and the other based on the use of an array of microphones.

Pickett, G. F.↗
NASA NTRS1976

Proposal to National Aeronautics and Space Administration for continuation of a grazing incidence imaging telescope for X-ray astronomy using sounding rockets

The construction of a high resolution imaging telescope experiment payload suitable for launch on an Astrobee F sounding rocket was proposed. Also integration, launch, and subsequent data analysis effort were included. The payload utilizes major component subassemblies from the HEAO-B satellite program which were nonflight development units for that program. These were the X ray mirror and high resolution imager brassboard detector. The properties of the mirror and detector were discussed. The availability of these items for a sounding rocket experiment were explored with the HEAO-B project office.

Murray, B.↗
NASA NTRS1978

Experimental and theoretical sound transmission

The capabilities of the Kansas University- Flight Research Center for investigating panel sound transmission as a step toward the reduction of interior noise in general aviation aircraft were discussed. Data obtained on panels with holes, on honeycomb panels, and on various panel treatments at normal incidence were documented. The design of equipment for panel transmission loss tests at nonnormal (slanted) sound incidence was described. A comprehensive theory-based prediction method was developed and shows good agreement with experimental observations of the stiffness controlled, the region, the resonance controlled region, and the mass-law region of panel vibration.

Roskam, J.↗
NASA NTRS1978

Propagation of sound through a sheared flow

Sound generated in a moving fluid must propagate through a shear layer in order to be measured by a fixed instrument. These propagation effects were evaluated for noise sources typically associated with single and co-flowing subsonic jets and for subcritical flow over airfoils in such jets. The techniques for describing acoustic propagation fall into two categories: geometric acoustics and wave acoustics. Geometric acoustics is most convenient and accurate for high frequency sound. In the frequency range of interest to the present study (greater than 150 Hz), the geometric acoustics approach was determined to be most useful and practical.

Woolley, J. P.↗
NASA NTRS1978

Preliminary studies of electromagnetic sounding of cometary nuclei

The internal structure of a comet could be determined with a spacecraft borne electromagnetic sounder. A dielectric profile of the comet could be produced in direct analogy with terrestrial glacier and ice sheet sounding experiments. This profile would allow the detection of a rocky core or ice layers if they exist, just as layers in the ice and the bedrock interface have been clearly observed through the Greenland ice sheet. It would also provide a gross estimate of the amount of dust in the icy region. Models for the response of the nucleus and cometary plasma to electromagnetic sounding are developed and used to derive experimental parameters. A point system design was completed. Preliminary engineering study results indicate that the sounder is well within the bounds of current space technology.

Gabriel, A.↗
NASA NTRS1977

Experimental determination of sound and high-speed flow interaction

An experimental facility for measuring the attenuation of sound at various frequencies and modes in a finite duct with high-speed flow (with or without an axial pressure gradient) is described. The facility consists of an anechoic chamber transonic compressor with inlets of different area variations (or axial gradients); sound of selected frequencies and modes is produced with eight circumferential acoustic drivers. The experimental results indicate that high Mach number inlets can increase noise propagation. In addition, an inlet with a constant axial gradient is found to have a better acoustic and aerodynamic performance than inlets of the same area ratio with steep gradients near the throat or exit.

Lumsdaine, E.↗
NASA NTRS1978

On sound transmission into a heavily-damped cylinder

A mathematical model for the transmission of sound into a thin monocoque cylindrical shell is discussed. The model is used to evaluate an oblique plane wave incident upon a flexible thin cylindrical shell. The solution is applicable to the transmission of sound under actual flight conditions. The model is then used to determine curves of cylinder-transmission loss for heavily damped cylinders. Numerical results are found for several plane-wave incidence angles for a narrow-bodied jet fuselage made of aluminum. It is noted that damping (i.e., the loss factor) increases, dips because of reduced cylinder resonances, and eventually disappears when the loss factor of the shell is large enough.

Koval, L. R.↗
NASA NTRS1978

Sound production in a moving stream

Jet noise is modeled by particle-attached quadrupoles convected with the velocity of the actual fluid but positioned near a hypothetical instability-free vortex sheet. The strength of each quadrupole is Lighthill's stress tensor per unit mass. The work of Mani (1976) has shown that this type of model agrees well with experiment, and the present work establishes some of the equivalent sources needed for an exact analogy. The instability waves of the shear layer, as they grow into turbulence, are heard as sound that builds up as a precursor of the main turbulence-driven field. The circular compact jet is examined in some detail, and it is found that when the jet is very light it can provide a waveguide in which the effects of source activity persist for some time but eventually leak out as sound. This interaction greatly distorts the free field characteristics of the turbulent sources, so that Reynolds-stress-induced waves have an intensity that scales with the fourth power of jet velocity.

Dowling, A. P.↗
NASA NTRS1978

Fourth-order acoustic torque in intense sound fields

The observation of a fourth-order acoustic torque in intense sound fields is reported. The torque was determined by measuring the acoustically induced angular deflection of a polished cylinder suspended by a torsion fiber. This torque was measured in a sound field of amplitude greater than that in which first-order acoustic torque has been observed.

Wang, T. G.↗