Search NASA⌕ Search

SEARCH · Search NASA

Results for “Superstructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Graphite edge controlled registration of monolayer MoS{sub 2} crystal orientation

Transition metal dichalcogenides such as the semiconductor MoS{sub 2} are a class of two-dimensional crystals. The surface morphology and quality of MoS{sub 2} grown by chemical vapor deposition are examined using atomic force and scanning tunneling microscopy techniques. By analyzing the moiré patterns from several triangular MoS{sub 2} islands, we find that there exist at least five different superstructures and that the relative rotational angles between the MoS{sub 2} adlayer and graphite substrate lattices are typically less than 3°. We conclude that since MoS{sub 2} grows at graphite step-edges, it is the edge structure which controls the orientation of the islands, with those growing from zig-zag (or armchair) edges tending to orient with one lattice vector parallel (perpendicular) to the step-edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The atomic structure of low-index surfaces of the intermetallic compound InPd

The intermetallic compound InPd (CsCl type of crystal structure with a broad compositional range) is considered as a candidate catalyst for the steam reforming of methanol. Single crystals of this phase have been grown to study the structure of its three low-index surfaces under ultra-high vacuum conditions, using low energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). During surface preparation, preferential sputtering leads to a depletion of In within the top few layers for all three surfaces. The near-surface regions remain slightly Pd-rich until annealing to ∼580 K. A transition occurs between 580 and 660 K where In segregates towards the surface and the near-surface regions become slightly In-rich above ∼660 K. This transition is accompanied by a sharpening of LEED patterns and formation of flat step-terrace morphology, as observed by STM. Several superstructures have been identified for the different surfaces associated with this process. Annealing to higher temperatures (≥750 K) leads to faceting via thermal etching as shown for the (110) surface, with a bulk In composition close to the In-rich limit of the existence domain of the cubic phase. The Pd-rich InPd(111) is found to be consistent with a Pd-terminated bulk truncation model as shown by dynamical LEED analysis while, after annealing at higher temperature, the In-rich InPd(111) is consistent with an In-terminated bulk truncation, in agreement with density functional theory (DFT) calculations of the relative surface energies. More complex surface structures are observed for the (100) surface. Additionally, individual grains of a polycrystalline sample are characterized by micro-spot XPS and LEED as well as low-energy electron microscopy. Results from both individual grains and “global” measurements are interpreted based on comparison to our single crystals findings, DFT calculations and previous literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of magnetoresistance and ferromagnetic coupling in the complex perovskites CaCu{sub 3}(Mn{sub 4−x}Al{sub x})O{sub 12} (x = 0, 0.2, 0.4, and 0.6): A neutron diffraction study

New compounds of the series CaCu{sub 3}(Mn{sub 4−x}Al{sub x})O{sub 12} have been prepared under high pressure conditions (2 GPa), in the presence of KClO{sub 4} as oxidizing agent to stabilize Mn{sup 3+,4+} mixed valence. The polycrystalline samples have been characterized by x-ray diffraction, neutron powder diffraction (NPD), magnetic, and magnetotransport measurements. All the samples are cubic, space group Im-3. These oxides adopt a superstructure of ABO{sub 3} perovskite given by the long-range 1:3 ordering of Ca{sup 2+} and Cu{sup 2+} ions at the A sublattice. The NPD study for x = 0.4 shows that Al{sup 3+} ions are statistically distributed at the octahedral positions, being the (Mn,Al)O{sub 6} octahedra strongly tilted, with superexchange (Mn,Al)-O-(Mn,Al) angles of 142.1°. Also, neutron data clearly show that some Mn{sup 3+} ions (0.65(2) per formula) are located together with Cu{sup 2+} at the square-planar 6b positions. Regarding the magnetic properties, all the compounds present a spontaneous increase of the magnetization below T{sub C}, typical of ferro-or ferrimagnetic materials, with T{sub C} decreasing upon Al introduction. The magnetic structure determined from low-temperature NPD data unveils a ferromagnetic coupling between (Cu{sup 2+}, Mn{sup 3+}){sub 6b} spins and Mn{sub 8c} spins at octahedral positions; this is in contrast with the ferrimagnetic structure observed for RCu{sub 3}Mn{sub 4}O{sub 12} and CaCu{sub 3}Mn{sub 4}O{sub 12}, where an AFM coupling is observed between both magnetic sublattices. Interestingly, an enhancement of the magnetoresistance effect is observed for x = 0.2, well beyond that found for the parent compound. This effect, in materials subtly doped with non-magnetic elements at the Mn positions, may be of interest for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grain size tuning of nanostructured Cu{sub 2}O films through vapour phase supersaturation control and their characterization for practical applications

A strategy for creating nanostructured films is the alignment of nanoparticles into ordered superstructures as living organisms synthesize biomaterials with superior physical properties using nanoparticle building blocks. We synthesized nanostructured films of Cu{sub 2}O of variable grain size by establishing the condition of supersaturation for creation of nanoparticles of copper which deposited as nanograined films and which was then oxidized. This technique has the advantage of being compatible with conventional vacuum processes for electronic device fabrication. The Cu{sub 2}O film samples consisted of a secondary structure of spherical particles of almost uniform size, each particle being an agglomerate of primary nanocrystals. Fractal analysis of the AFM images of the samples is carried out for studying the aggregation mechanism. Grain size tuning of the nanostructured Cu{sub 2}O films has been studied using XRD, and micro-Raman and photoluminescence spectroscopy.

36 MATERIALS SCIENCE↗

Correlation between magnetism and “dark stripes” in strained La{sub 1−x}Sr{sub x}CoO{sub 3} epitaxial films (0 ≤ x ≤ 0.1)

Using the technique of aberration-corrected scanning transmission electron microscopy, we performed a systematic analysis for the atomic lattice of the strained La{sub 1−x}Sr{sub x}CoO{sub 3} (0 ≤ x ≤ 0.1) epitaxial films, which have drawn a great attention in recent years because of their anomalous magnetism. Superstructures characterized by dark stripes are observed in the lattice image, evolving with combined Sr-doping and lattice strains. Fascinatingly, we found a close relation between the proportion of the Co ions in dark stripes and the saturation magnetization of the film: the latter grows linearly with the former. This result implies that the magnetism could be exclusively ascribed to the Co ions in dark stripes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of alloying by lanthanum and high rhenium superalloys on the basis of Ni-Al-Cr on the structure and phase composition

This paper presents transmission and scanning electronic microscope investigations of Ni-Al-Cr superalloy alloyed with additional Re and La elements. This superalloy is obtained by the directional solidification method and subsequently is subjected to two-stage high-temperature annealing: 1) at T = 1150°C, the test time is 1 hour; 2) at T = 1100°C, the testing time is 1430 hours. It was found that the γ- and γ′-phases are the main phases in the two states on the basis of fcc lattice. Where γ is the disordered fcc solid solution and γ′-phase is the main phase with an ordered arrangement of atoms having the L1{sub 2} superstructure. It is shown that such additional elements as Re and La result in the formation of new phases in Ni-Al-Cr accompanied by considerable modifications of quasi-cuboid structure in its γ′-phase. The phase composition and morphology of the phases are studied.

36 MATERIALS SCIENCE↗

Early stages of plasma induced nitridation of Si (111) surface and study of interfacial band alignment

We report here a systematic study of the nitridation of the Si (111) surface by nitrogen plasma exposure. The surface and interface chemical composition and surface morphology are investigated by using RHEED, X-ray photoelectron spectroscopy, and atomic force microscopy (AFM). At the initial stage of nitridation two superstructures—“8 × 8” and “8/3 × 8/3”—form, and further nitridation leads to 1 × 1 stoichiometric silicon nitride. The interface is seen to have the Si{sup 1+} and Si{sup 3+} states of silicon bonding with nitrogen, which suggests an atomically abrupt and defect-free interface. The initial single crystalline silicon nitride layers are seen to become amorphous at higher thicknesses. The AFM image shows that the nitride nucleates at interfacial dislocations that are connected by sub-stoichiometric 2D-nitride layers, which agglomerate to form thick overlayers. The electrical properties of the interface yield a valence band offset that saturates at 1.9 eV and conduction band offset at 2.3 eV due to the evolution of the sub-stoichiometric interface and band bending.

36 MATERIALS SCIENCE↗

Layer specific optical band gap measurement at nanoscale in MoS{sub 2} and ReS{sub 2} van der Waals compounds by high resolution electron energy loss spectroscopy

Layer specific direct measurement of optical band gaps of two important van der Waals compounds, MoS{sub 2} and ReS{sub 2}, is performed at nanoscale by high resolution electron energy loss spectroscopy. For monolayer MoS{sub 2}, the twin excitons (1.8 and 1.95 eV) originating at the K point of the Brillouin zone are observed. An indirect band gap of 1.27 eV is obtained from the multilayer regions. Indirect to direct band gap crossover is observed which is consistent with the previously reported strong photoluminescence from the monolayer MoS{sub 2}. For ReS{sub 2}, the band gap is direct, and a value of 1.52 and 1.42 eV is obtained for the monolayer and multilayer, respectively. The energy loss function is dominated by features due to high density of states at both the valence and conduction band edges, and the difference in analyzing band gap with respect to ZnO is highlighted. Crystalline 1T ReS{sub 2} forms two dimensional chains like superstructure due to the clustering between four Re atoms. The results demonstrate the power of HREELS technique as a nanoscale optical absorption spectroscopy tool.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, structure, and transport properties of Ba 8 Cu 16 – x Au x P 30 clathrate solid solution

In this work, a new clathrate solid solution Ba 8 Cu 16 – x Au x P 30 ( x = 4, 8, 12) was synthesized by a high-temperature solid-state annealing method. The crystal structures of Ba 8 Cu 16 – x Au x P 30 were determined by single crystal x-ray diffraction. This clathrate solid solution crystallizes in the orthorhombic superstructure of clathrate-I type with 23 crystallographically independent framework sites, eight of them are occupied by Au/Cu and 15 are exclusively occupied by P atoms. The distribution of Au and Cu atoms over these eight framework sites is not random with a clear preference for Au to occupy the largest (Au/Cu)P 4 tetrahedra in the framework. The thermal stability and thermoelectric properties of the Ba 8 Cu 16 – x Au x P 30 solid solution were evaluated. Low thermal conductivity was achieved for Ba 8 Cu 16 – x Au x P 30 due to the combination of the host–guest crystal structure with rattling Ba atoms with the presence of heavy Au atoms and substitutional Cu/Au disorder in the clathrate framework.

36 MATERIALS SCIENCE↗

Pressure-induced semiconductor-to-metal phase transition of a charge-ordered indium halide perovskite

Phase transitions in halide perovskites triggered by external stimuli generate significantly different material properties, providing a great opportunity for broad applications. Here, we demonstrate an In-based, charge-ordered (In + /In 3+ ) inorganic halide perovskite with the composition of Cs 2 In(I)In(III)Cl 6 in which a pressure-driven semiconductor-to-metal phase transition exists. The single crystals, synthesized via a solid-state reaction method, crystallize in a distorted perovskite structure with space group I 4/ m with a = 17.2604(12) Å, c = 11.0113(16) Å if both the strong reflections and superstructures are considered. The supercell was further confirmed by rotation electron diffraction measurement. The pressure-induced semiconductor-to-metal phase transition was demonstrated by high-pressure Raman and absorbance spectroscopies and was consistent with theoretical modeling. This type of charge-ordered inorganic halide perovskite with a pressure-induced semiconductor-to-metal phase transition may inspire a range of potential applications.

36 MATERIALS SCIENCE↗

Photo-printing of faceted DNA patchy particles

Patchy particles with shape complementarity can serve as building blocks for assembling colloidal superstructures. Alternatively, encoding information on patches using DNA can direct assembly into a variety of crystalline or other preprogrammed structures. Here, we present a tool where DNA is used both to engineer shape and to encode information on colloidal particles. Two reactive oil emulsions with different but complementary DNA (cDNA) brushes are assembled into CsCl-like crystalline lattices. The DNA brushes are recruited to and ultimately localized at the junctions between neighboring droplets, which gives rise to DNA-encoded faceted patches. The emulsions are then solidified by ultraviolet (UV) polymerization, producing faceted patchy particles. The facet size and DNA distribution are determined by the balance between the DNA binding energy and the elastic deformation energy of droplets. This method leads to a variety of new patchy particles with directional interactions in scalable quantities.

59 BASIC BIOLOGICAL SCIENCES↗

Four-dimensional chromosome reconstruction elucidates the spatiotemporal reorganization of the mammalian X chromosome

Significance Breakthrough technological advances such as Hi-C have enabled large-scale sequencing of pairwise genomic contacts. However, translating the 2D contacts to 3D spatial models remains challenging. Here we develop the “4DHiC” modeling method to infer 3D information from 2D datasets across time and construct a 3D model of the inactive X-chromosome (Xi). Our model not only demonstrates a spatial phase-separation between A/B and S1/S2 compartments to form “hemispheres,” but also reveals persistent smaller-scale structures hidden under the Xi superstructure. We also simulate Xist RNA spreading dynamics and deduce that the RNA spreads between hemispheres via both surface and core to establish the Xi. Our 4DHiC will serve a growing demand for data-driven methodologies that extract spatial information from biochemical interaction data.

Lappala, Anna↗

Collective behavior of “flexicles”

In recent years the functionality of synthetic active microparticles has edged even closer to that of their biological counterparts. However, we still lack the understanding needed to recreate at the microscale key features of autonomous behavior exhibited by microorganisms or swarms of macroscopic robots. In this study, we propose a model for a three-dimensional deformable cellular composite particle consisting of self-propelled rod-shaped colloids confined within a flexible vesicle—representing a superstructure we call a “flexicle” that couples particle deformation to the internal dynamics of the internal active components. Using molecular dynamics simulations, we investigate the collective behavior of dense systems composed of many flexicles. We show that individual flexicles exhibit shape changes upon collisions with other flexicles that lead to rearrangements of the internal active rods, which slows flexicle motion. This shape deformability gives rise to a diverse set of motility-induced phase separation phenomena and the spontaneous flow of flexicles reminiscent of the migration of cells in dense tissues. Our findings establish a foundation for designing responsive, cell-like active particles and developing strategies for controlling swarm migration and other autonomous swarm behaviors at cellular and colloidal scales.

Science & Technology - Other Topics↗

Structural and Biophysical Analysis of BST-2/Tetherin Ectodomains Reveals an Evolutionary Conserved Design to Inhibit Virus Release

BST-2/tetherin is a host antiviral molecule that functions to potently inhibit the release of enveloped viruses from infected cells. In return, viruses have evolved antagonists to this activity. BST-2 traps budding virions by using two separate membrane-anchoring regions that simultaneously incorporate into the host and viral membranes. Here, we detailed the structural and biophysical properties of the full-length BST-2 ectodomain, which spans the two membrane anchors. The 1.6-{angstrom} crystal structure of the complete mouse BST-2 ectodomain reveals an {approx}145-{angstrom} parallel dimer in an extended {alpha}-helix conformation that predominantly forms a coiled coil bridged by three intermolecular disulfides that are required for stability. Sequence analysis in the context of the structure revealed an evolutionarily conserved design that destabilizes the coiled coil, resulting in a labile superstructure, as evidenced by solution x-ray scattering displaying bent conformations spanning 150 and 180 {angstrom} for the mouse and human BST-2 ectodomains, respectively. Additionally, crystal packing analysis revealed possible curvature-sensing tetrameric structures that may aid in proper placement of BST-2 during the genesis of viral progeny. Overall, this extended coiled-coil structure with inherent plasticity is undoubtedly necessary to accommodate the dynamics of viral budding while ensuring separation of the anchors.

60 APPLIED LIFE SCIENCES↗

SPITZER OBSERVATIONS OF A1763. II. CONSTRAINING THE NATURE OF ACTIVITY IN THE CLUSTER-FEEDING FILAMENT WITH VLA AND XMM-NEWTON DATA

The A1763 superstructure at z = 0.23 contains the first galaxy filament to be directly detected using mid-infrared observations. Our previous work has shown that the frequency of starbursting galaxies, as characterized by 24 {mu}m emission is much higher within the filament than at either the center of the rich galaxy cluster, or the field surrounding the system. New Very Large Array and XMM- Newton data are presented here. We use the radio and X-ray data to examine the fraction and location of active galaxies, both active galactic nuclei (AGNs) and starbursts (SBs). The radio far-infrared correlation, X-ray point source location, IRAC colors, and quasar positions are all used to gain an understanding of the presence of dominant AGNs. We find very few MIPS-selected galaxies that are clearly dominated by AGN activity. Most radio-selected members within the filament are SBs. Within the supercluster, three of eight spectroscopic members detected both in the radio and in the mid-infrared are radio-bright AGNs. They are found at or near the core of A1763. The five SBs are located further along the filament. We calculate the physical properties of the known wide angle tail (WAT) source which is the brightest cluster galaxy of A1763. A second double lobe source is found along the filament well outside of the virial radius of either cluster. The velocity offset of the WAT from the X-ray centroid and the bend of the WAT in the intracluster medium are both consistent with ram pressure stripping, indicative of streaming motions along the direction of the filament. We consider this as further evidence of the cluster-feeding nature of the galaxy filament.

79 ASTRONOMY AND ASTROPHYSICS↗

CONFIRMATION OF X-RAY ABSORPTION BY WARM-HOT INTERGALACTIC MEDIUM IN THE SCULPTOR WALL

In a previous paper, we reported a 3{sigma} detection of an absorption line from the warm-hot intergalactic medium (WHIM) using the Chandra and XMM X-ray grating spectra of the blazar H2356-309, the sight line of which intercepts the Sculptor Wall, a large-scale superstructure of galaxies at z {approx} 0.03. To verify our initial detection, we obtained a deep (500 ks), follow-up exposure of H2356-309 as part of the Cycle-10 Chandra Large Project Program. From a joint analysis of the Cycle-10 and previous (Cycle-8) Chandra grating data we detect the redshifted O VII WHIM line at a significance level of 3.4{sigma}, a substantial improvement over the 1.7{sigma} level reported previously when using only the Cycle-8 data. The significance increases to 4.0{sigma} when the existing XMM grating data are included in the analysis, thus confirming at higher significance the existence of the line at the redshift of the Sculptor Wall with an equivalent width of 28.5 {+-} 10.5 mA (90% confidence). We obtain a 90% lower limit on the O VII column density of 0.8 x 10{sup 16} cm{sup -2} and a 90% upper limit on the Doppler b parameter of 460 km s{sup -1}. Assuming the absorber is uniformly distributed throughout the {approx}15 Mpc portion of the blazar's sight line that intercepts the Sculptor Wall, that the O VII column density is {approx}2 x 10{sup 16} cm{sup -2} (corresponding to b {approx_gt} 150 km {sup -1} where the inferred column density is only weakly dependent on b), and that the oxygen abundance is 0.1 solar, we estimate a baryon over-density of {approx}30 for the WHIM, which is consistent with the peak of the WHIM mass fraction predicted by cosmological simulations. The clear detection of O VII absorption in the Sculptor Wall demonstrates the viability of using current observatories to study WHIM in the X-ray absorption spectra of blazars behind known large-scale structures.

79 ASTRONOMY AND ASTROPHYSICS↗

COSMOLOGICAL DENSITY FLUCTUATIONS ON 100 Mpc SCALES AND THEIR ISW EFFECT

We measure the matter probability distribution function (PDF) via counts in cells in a volume-limited subsample of the Sloan Digital Sky Survey Luminous Red Galaxy Catalog on scales from 30 h {sup -1} Mpc to 150 h {sup -1} Mpc and estimate the linear Integrated Sachs-Wolfe effect produced by supervoids and superclusters in the tail of the PDF. We characterize the PDF by the variance, S{sub 3}, and S{sub 4}, and study in simulations the systematic effects due to finite volume, survey shape, and redshift distortion. We compare our measurement to the prediction of {Lambda}CDM with linear bias and find a good agreement. We use the moments to approximate the tail of the PDF with analytic functions. A simple Gaussian model for the superstructures appears to be consistent with the claim by Granett et al. that density fluctuations on 100 h {sup -1} Mpc scales produce hot and cold spots with {Delta}T {approx} 10 {mu}K on the cosmic microwave background.

79 ASTRONOMY AND ASTROPHYSICS↗

DETECTION OF A TRANSIENT X-RAY ABSORPTION LINE INTRINSIC TO THE BL LACERTAE OBJECT H 2356-309

Since the launch of the Einstein X-ray Observatory in the 1970s, a number of broad absorption features have been reported in the X-ray spectra of BL Lac objects. These features are often interpreted as arising from high-velocity outflows intrinsic to the BL Lac object, therefore providing important information about the inner environment around the central engine. However, such absorption features have not been observed more recently with high-resolution X-ray telescopes such as Chandra and XMM-Newton. In this paper, we report the detection of a transient X-ray absorption feature intrinsic to the BL Lac object H 2356-309 with the Chandra X-ray Telescope. This BL Lac object was observed during XMM-Newton cycle 7 and Chandra cycles 8 and 10, as part of our campaign to investigate X-ray absorption produced by the warm-hot intergalactic medium residing in the foreground large-scale superstructure. During one of the 80 ks Chandra cycle 10 observations, a transient absorption feature was detected at 3.3{sigma} (or 99.9% confidence level, accounting for the number of 'trials), which we identify as the O VIII K{alpha} line produced by an absorber intrinsic to the BL Lac object. None of the other 11 observations showed this line. We constrain the ionization parameter (25 {approx}< {Xi} {approx}< 40) and temperature (10{sup 5} K <T < 2.5 x 10{sup 7} K) of the absorber. This absorber is likely produced by an outflow with a velocity up to 1500 km s{sup -1}. There is a suggestion of possible excess emission on the long-wavelength side of the absorption line; however, the derived properties of the emission material are very different from those of the absorption material, implying it is unlikely a typical P Cygni-type profile.

79 ASTRONOMY AND ASTROPHYSICS↗