SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measuring aerodynamic heating of wind-tunnel models by temperature sensitive paint, noting ambient pressure effect
Thermochromic materials application in display devices
Traveling Wave Maser /TWM/ that operates at S-band frequencies is characterized by a greatly improved gain-bandwidth product with relatively low equivalent-noise temperature. Tests indicate that its performance exceeds that of any other type of S-band amplifier.
The Mariner 9 infrared spectroscopy experiment has provided good quality spectra of many areas of Mars, predominantly in the Southern Hemisphere. Large portions of the thermal emission spectra are significantly affected by dust with a silicon oxide content approximately corresponding to that of an intermediate igneous rock, implying that Mars has undergone a substantial geochemical differentiation. Derived temperature profiles indicate a warm daytime upper atmosphere with a strong warming over the south polar cap. Atmospheric water vapor is clearly observed over the south polar area and less strongly over other regions.
The Mariner 9 IR spectroscopy experiment has provided good-quality spectra of many areas of Mars, predominantly in the southern hemisphere. Large portions of the thermal emission spectra are significantly affected by dust with a silicon oxide content approximately corresponding to that of an intermediate igneous rock, thus implying that Mars has undergone substantial geochemical differentiation. Derived temperature profiles indicate a warm daytime upper atmosphere with a strong warming over the south polar cap. Atmospheric water vapor is clearly observed over the south polar area and less strongly over other regions.
Electron microprobe examination revealed that glassy lunar fragments had inclusions as well as boundaries between mineral glasses of different compositions. Glassy lunar spherules showed detectable heterogeneity less marked than that of the fragments. The room-temperature refractive indices and densities of the spherules are changed by heat-treating them at 500 to 700 C. The large increases (as much as 2% in density and 0.7% in index of refraction) are difficult to explain on the basis of classical glass-transition phenomena alone unless extremely rapid cooling rates are assumed. Further, the spherules darkened significantly when they were heated in air or a medium vacuum above 625 C.
Observations were made of the total lunar eclipse on February 10, 1971 at a wavelength of 3.1 mm at the Millimeter Wave Observatory of the University of Texas at Austin. Eclipse cooling curves obtained for Copernicus, Mare Serenitatis, and a mountainous region indicate maximum temperature decreases of 6.77%, 6.37%, and 7.51%, respectively. Cooling rates of about 6 K/hour were measured. The normalized solar insolation has also been calculated for each region.
Spectral experiments on Mars Orbiter show that solar energy is absorbed by the planet and its atmosphere and eventually re-emitted in the infrared as thermal emission. The majority of the radiances at the north polar Mars area follows very closely the radiance from a black body of about 145 degrees kelvin, which indicates a frozen CO2 surface; the south polar region radiance indicates a temperature inversion in the atmosphere, and the emission of atmospheric dust as well as emissions from frozen CO2.
The applications of remote sensing techniques to spectral surveys of irrigation, crops, and soils are reported. Topics discussed include: (1) canopy temperature as an indication of plant water stress, (2) temperature of soils and of crop canopies differing in water conditions, (3) ERTS project, (4) spectrum matching and pattern recognition, (5) photographic procedures and interpretation, (6) interaction of light with plants, and (7) plant physiological and histological factors.
Initial results were obtained from low power operation of the NASA Lewis Bumpy Torus experiment, in which a steady-state ion heating method based on the modified Penning discharge is applied in a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils, each 19 cm i.d. and capable of 3.0 T, equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation were observed, which depend on background pressure, and have different radial density profiles. Steady state neutron production was observed. The ion heating process in the bumpy torus appears to parallel closely the mechanism observed when the modified Penning discharge was operated in a simple magnetic mirror field.
Auger electron spectroscopy was used to examine the initial stages of oxidation of a polycrystalline copper - 19.6 a/o-aluminum alloy. The growth of the 55-eV aluminum oxide peak and the decay of the 59-, 62-, and 937-eV copper peaks were examined as functions of temperature, exposure, and pressure. Pressures ranged from 1x10 to the minus 7th power to 0.0005 torr of O2. Temperatures ranged from room temperature to 700 C. A completely aluminum oxide surface layer was obtained in all cases. Complete disappearance of the underlying 937-eV copper peak was obtained by heating at 700 C in O2 at 0.0005 torr for 1 hr. Temperature studies indicated that thermally activated diffusion was important to the oxidation studies. The initial stages of oxidation followed a logarithmic growth curve.
The theory of operation of the thermal flow meter is presented, and a theoretical model is used to determine design parameters for a device capable of measuring mercury flows in the range of 0 to 5 gm/hr. Flow meter construction is described. Tests performed using a positive displacement mercury pump as well as those performed with the device in the feed line of an operating thruster are discussed. A flow meter response time of about a minute and a sensitivity of about 10 mv/gm/hr are demonstrated. Additional work to relieve a sensitivity of the device to variations in ambient temperature is indicated to improve its quantitative performance.
Initial results are given for low power operation of the NASA Lewis Bumpy Torus experiment in which a steady-state ion heating method based on a modified Penning discharge is applied to a bumpy torus confinement geometry. The magnet facility consists of 12 superconducting coils capable of 3.0 T each and equally spaced in a toroidal array 1.52 m in major diameter. A 18 cm i.d. anode ring is located at each of the 12 midplanes and is maintained at high positive potentials by a dc power supply. Initial observations indicate electron temperatures from 10 to 150 eV, and ion kinetic temperatures from 200 eV to 1200 eV. Two modes of operation with different radial density profiles can be achieved, depending on the background pressure applied.
Vigarano, a type 3 carbonaceous chondrite, contains a chondrule composed of highly refractory Ca- and Al-rich glass with minor spinel. The chondrule formed from material similar to the Ca-, Al-, Ti-rich aggregates that are common in Vigarano and other type 3 chondrites and formation of these refractory aggregates must predate formation of some Vigarano chondrules. Experiments with synthetic analogs and a comparison with studies in the system CaO-MgO-Al2O3-SiO2 indicate a temperature for formation of the chondrule at or above 1700 C followed by very rapid cooling.
An experimental investigation was performed to determine the rolling element fatigue life of electron beam-welded hollow balls with a diameter ratio (o.d./i.d.) of 1.26 and to determine the operating characteristics of bearings using these hollow balls. Similar bearings with solid balls were also tested and the data compared. The bearings were operated at shaft speeds up to 28,000 rpm with a thrust load of 2200 N (500 lb). Ball failures during the bearing tests were due to flexure fatigue. The solid and hollow ball bearings tested showed little difference in outer race temperatures and indicated the same bearing torque. The 17.5-mm (0.6875-in.) diameter balls were also tested in the five-ball fatigue tester and showed no significant difference in life when compared with the life of a solid ball.
Data concerning the quantitative absorption in the 11 and 22 micron region by HNO3 were obtained. Results are presented indicating the temperature dependence of these bands of HNO3 vapor. The 21.8 micron absorption bands of HNO3 vapor at 40 C are discussed along with the integrated intensity and line parameters for the 6.2 micron band of NO2.
BeO dispersed nickel alloys, produced by powder metallurgy techniques, were studied extensively in stress rupture at 815, 982, and 1093 C (1088, 1255, and 1366 K) and by transmission electron microscopy. The alloys were subjected to a variety of thermomechanical treatments (TMT) to determine the benefits of TMT on properties. It is shown that the use of intermediate annealing treatments after 10 pct reduction steps is highly beneficial on both low and high temperature properties. It is indicated that the high temperature strength is not primarily dependent on the grain aspect ratio or texture but depends strongly on the dislocation density and distribution of dislocations in a stable substructure which is pinned by the fine oxide dispersion.
A technique is developed for estimating the outer scale of turbulence in a planetary atmosphere using dual-frequency radio occultation measurements. This technique is based on the frequency dependence of the temporal frequency spectra for the log-amplitude fluctuations and is particularly useful when probing the upper atmosphere where the transverse velocity of the line-of-sight path is decelerating very rapidly. It is applied to the region of strong turbulence located in the vicinity of 60 km on the dayside of the atmosphere of Venus using the Mariner 10 S/X radio occultation measurements. It is found that, contrary to earlier findings from Mariner 5, the outer scale of turbulence is at least 5 km. It appears that the outer scale of turbulence is as large as the vertical extent of the region of strong turbulence. Estimates of the structure constants for refractive index and temperature fluctuations indicate that the turbulence is stronger than that measured near the earth's tropopause.