Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Spatially-resolved study of the Meissner effect in superconductors using NV-centers-in-diamond optical magnetometry

Non-invasive magnetic field sensing using optically-detected magnetic resonance of nitrogen-vacancy centers in diamond was used to study spatial distribution of the magnetic induction upon penetration and expulsion of weak magnetic fields in several representative superconductors. Vector magnetic fields were measured on the surface of conventional, elemental Pb and Nb, and compound LuNi 2 B 2 C and unconventional iron-based superconductors Ba 1-x K x Fe 2 As 2 (x = 0.34 optimal hole doping), Ba(Fe 1-x Co x )2As2 (x = 0.07 optimal electron doping), and stoichiometric CaKFe 4 As 4 , using variable-temperature confocal system with diffraction-limited spatial resolution. Magnetic induction profiles across the crystal edges were measured in zero-field-cooled and field-cooled conditions. While all superconductors show nearly perfect screening of magnetic fields applied after cooling to temperatures well below the superconducting transition, T c , a range of very different behaviors was observed for Meissner expulsion upon cooling in static magnetic field from above T c . Substantial conventional Meissner expulsion is found in LuNi 2 B 2 C, paramagnetic Meissner effect is found in Nb, and virtually no expulsion is observed in iron-based superconductors. In all cases, good correlation with macroscopic measurements of total magnetic moment is found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Impact of high-fidelity temperature feedback modeling on fusion blanket neutronics

Accurate modeling and simulation of neutron and gamma transport and interactions within fusion tokamaks represents a critical area of research for fusion energy development. This paper presents a method to couple computational fluid dynamics (CFD) results to high-fidelity neutronics analyses, to explore the fusion neutronics’ feedback to blanket temperature and density. This method is demonstrated on a sector model of a tokamak with immersion molten salt blanket, and the relative differences in tritium breeding ratio (TBR) with spatially-resolved temperature modeling are explored. Additionally, the influence of higher fidelity neutronics results on the subsequent CFD analysis is explored. Results show that global TBR changes $<$0.1% due to temperature spatial distribution modeling. However, local TBR in areas with high temperature variability can have up to ∼4% difference.

blanket fusion↗
DOE OSTI2016

Potts-model critical manifolds revisited

We compute the critical polynomials for the q-state Potts model on all Archimedean lattices, using a parallel implementation of the algorithm of Ref. [1] that gives us access to larger sizes than previously possible. The exact polynomials are computed for bases of size 6 6 unit cells, and the root in the temperature variable v = e K -1 is determined numerically at q = 1 for bases of size 8 8. This leads to improved results for bond percolation thresholds, and for the Potts-model critical manifolds in the real (q; v) plane. In the two most favourable cases, we find now the kagome-lattice threshold to eleven digits and that of the (3; 12 2 ) lattice to thirteen. Our critical manifolds reveal many interesting features in the antiferromagnetic region of the Potts model, and determine accurately the extent of the Berker-Kadano phase for the lattices studied.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Phase diagram of the triangular-lattice Potts antiferromagnet

Here, we study the phase diagram of the triangular-lattice Q-state Potts model in the real $(Q, v)$ -plane, where $v={\rm e}^J-1$ is the temperature variable. Our first goal is to provide an obviously missing feature of this diagram: the position of the antiferromagnetic critical curve. This curve turns out to possess a bifurcation point with two branches emerging from it, entailing important consequences for the global phase diagram. We have obtained accurate numerical estimates for the position of this curve by combining the transfer-matrix approach for strip graphs with toroidal boundary conditions and the recent method of critical polynomials. The second goal of this work is to study the corresponding $A_{p-1}$ RSOS model on the torus, for integer $p=4, 5, \ldots, 8$ . We clarify its relation to the corresponding Potts model, in particular concerning the role of boundary conditions. For certain values of p, we identify several new critical points and regimes for the RSOS model and we initiate the study of the flows between the corresponding field theories.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Intrinsic thermal expansion and tunability of thermal expansion coefficient in Ni-substituted Co 2 V 2 O 7

Abstract Framework oxide materials are well-known for exhibiting not only negative thermal expansion (NTE), but also demonstrating thermal expansion that can be controlled using composition as a tuning parameter. In this work, we study the intrinsic thermal expansion properties of Co 2 V 2 O 7 , which has shown bulk linear NTE, and attempt to understand how substituting Ni 2+ for Co 2+ will affect the thermal expansion. The isomorphic solid solution is synthesized through solid-state methods and characterized using x-ray diffraction (XRD), diffuse reflectance spectroscopy, and neutron diffraction. The size difference between Ni 2+ and Co 2+ as well as the polyhedral volume of each Co 2+ metal coordination environment in the crystal structure allows Ni 2+ to partially be directed toward one crystallographic site over the other. Variable temperature synchrotron XRD data are employed to understand intrinsic thermal expansion. Across the solid solution, no intrinsic NTE is observed at the microscopic level, yet a degree of tunability in the thermal expansion coefficient with Ni substitution is demonstrated. The disparities between the intrinsic and bulk thermal expansion properties suggest that a morphological mechanism may have resulted in NTE in the bulk.

Materials Science↗
DOE OSTI2024

Local lattice distortions and electronic phases in perovskite manganite Pr 0.5 Sr 0.5 MnO 3

We use variable temperature and magnetic field total x-ray scattering to study the crystal structure of the strongly correlated Pr 0.5 Sr 0.5 MnO 3 perovskite, which is a paramagnetic insulator at room temperature, becomes a ferromagnetic metal at 272 K and, upon further decreasing the temperature, turns into an antiferromagnetic insulator at 105 K. We find that a model featuring a monoclinic symmetry captures the structure and its temperature and field evolution well, eliminating the need to evoke a phase segregation scenario as done in prior studies. It appears that coupled variations in Mn–oxygen bonding distances and angles from their values in an undistorted perovskite lattice, i.e., coupled local lattice distortions, assist the phase transitions in Pr 0.5 Sr 0.5 MnO 3 , contributing to its unique physical properties. Local structural distortions thus emerge as an important degree of freedom in strongly correlated systems, in particular perovskite manganates, and, therefore, they should be fully accounted for when their fascinating physics is considered.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Close-up view of the interplay between lattice distortions and charge density waves: Case study on rare-earth nickel carbides

Using variable temperature total x-ray scattering and large-scale structure modeling, we study the temperature and composition evolution of lattice distortions and charge density waves (CDWs) in the archetypal strongly correlated system RENi⁢ C 2 (RE=Dy, Tb, Gd, and Sm). Joint analysis of reciprocal and real space data reveals the presence of strong lattice distortions that, depending on the RE species and temperature, appear periodic or remain local, forming a complex CDW phase diagram. Apparently, the CDWs in RENi⁢ C 2 materials arise from a common to the system lattice instability involving diverse distortion modes that persist when magnetic order also sets in at very low temperature. In conclusion, the results support the notion that intrinsic lattice distortions are important to the emergence of exotic electronic phases in strongly correlated systems and call for their further investigation using the advanced approach adopted here.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Three-dimensional charge density wave in the dual heavy fermion system UPt 2 Si 2

Heavy fermion liquids offer via their Kondo lattice diverse possibilities for exotic ground states. Using variable-temperature atomic pair distribution function analysis, we study the local atomic structure of the "dual" heavy fermion liquid UPt 2 Si 2 , which exhibits antiferromagnetism consistent with localized 5f-electron states and transport properties characteristic to itinerant 5f-"spd" hybridized electron systems. We show that UPt 2 Si 2 exhibits periodic lattice distortions (PLDs) involving both uranium and platinum atoms that are characteristic to three-dimensional charge density waves. Here, the temperature evolution of the PLDs tracks that of the transport and magnetic properties, suggesting the presence of little-known 5f-electron-lattice interactions. We argue that PLDs in heavy fermion liquids in general, and in particular in UPt 2 Si 2 , appear as new degrees of freedom that entangle competing electronic states and, as such, must be accounted for when their rich physics is considered.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Two-step charge density wave transition and hidden transient phase in 1 T – TiSe 2

Using variable temperature atomic pair distribution function analysis, we study the emergence of charge density wave (CDW) order in 1T-TiSe 2 and find that it takes place via a two-step transition. First, upon decreasing temperature to about 235(3) K, CDW related lattice distortions emerge in the individual TiSe 2 layers alone. Then, upon further decreasing the temperature, the two-dimensional distortions in the layers couple and the widely recognized three-dimensional 2a o x 2a o x 2c o superstructure emerges at about 205(3) K. Because two different band gaps are known to emerge at the same temperatures, the finding indicates the presence of strong electron-phonon coupling. The transient phase between the two steps lacks inversion symmetry and may serve as a precursor of the debated chiral 1T-TiSe 2 phase. Finally, our findings are important for the understanding of the enigmatic CDW transition in 1T-TiSe 2 and CDW instabilities in van der Waals materials in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Genesis and atomic structure of the charge density wave phase of 1T-VSe 2

Using variable temperature total x-ray scattering, we study the emergence of charge density wave (CDW) order in the archetypal transition-metal dichalcogenide (TMDC) 1⁢𝑇−VSe 2 . Here, we find that a CDW precursor phase (PF) appears at 𝑇 CDW⁡(PF) of 200(5) K, where V and Se atoms experience in- and out-of-plane static displacements from their position in the undistorted lattice, respectively. The displacements increase with decreasing temperature and a little-known superstructure of V triatomic clusters emerges below 𝑇 CDW⁡(3⁢D) of 100(5) K, where three-dimensional CDW order sets in. Concurrently, Se atoms form less well-defined dimers. Thus, similarly to other TMDCs, 1⁢𝑇−VSe 2 appears to exhibit a two-step CDW transition. The finding underlines the key contribution of lattice distortions to the emergence of CDW order in 1⁢𝑇−VSe 2 and generally in TMDCs.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Local structure in BaTi O 3 - BiSc O 3 dipole glasses

Local structures in cubic perovskite-type (Ba 0.6 Bi 0.4 )(Ti 0.6 Sc 0.4 )O 3 solid solutions that exhibit reentrant dipole glass behavior have been studied with variable-temperature x-ray/neutron total scattering, extended x-ray absorption fine structure, and electron diffraction methods. Simultaneous fitting of these data using a reverse Monte Carlo algorithm provided instantaneous atomic configurations, which have been used to extract local displacements of the constituent species. The smaller Bi and Ti atoms exhibit probability density distributions that consist of 14 and 8 split sites, respectively. In contrast, Ba and Sc feature single-site distributions. The multisite distributions arise from large and strongly anisotropic off-center displacements of Bi and Ti. The cation displacements are correlated over a short range, with a correlation length limited by chemical disorder. The magnitudes of these displacements and their anisotropy, which are largely determined by local chemistry, change relatively insignificantly on cooling from room temperature. The structure features a nonrandom distribution of local polarization with low-dimensional polar clusters that are several unit cells in size. In situ measurements of atomic pair-distribution function under applied electric field were used to study field-induced changes in the local structure; however, no significant effects besides lattice expansion in the direction of the field could be observed up to electric-field values of 4 kVmm -1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Visualization and manipulation of magnetic domains in the quasi-two-dimensional material F e 3 GeT e 2

The magnetic domains in two-dimensional layered material Fe 3 GeTe 2 are studied by using a variable-temperature scanning tunneling microscope with a magnetic tip after in situ cleaving of single crystals. A stripy domain structure is revealed in a zero-field-cooled sample below the ferromagnetic transition temperature of 205 K, which is replaced by separate double-walled domains and bubble domains when cooling the sample under a magnetic field of a ferromagnetic Ni tip. The Ni tip can further convert the double-walled domain to a bubble domain pattern as well as move the Neel-type chiral bubble in submicrometer distance. The temperature-dependent evolutions of both zero-field-cooled and field-cooled domain structures correlate well with the bulk magnetization from magnetometry measurements. Furthermore, atomic resolution scanning tunneling images and spectroscopy are acquired to understand the atomic and electronic structures of the material, which are further corroborated by first-principles calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Helical magnetism in Sr-doped CaM n 7 O 12 films

Noncollinear magnetism can play an important role in multiferroic materials but is relatively understudied in oxide heterostructures compared to their bulk counterparts. Using variable temperature magnetometry and neutron diffraction, we demonstrate the presence of helical magnetic ordering in CaMn 7 O 12 and Ca 1-x Sr x Mn 7 O 12 (for x up to 0.51) thin films. Consistent with bulk Ca 1-x Sr x Mn 7 O 12 , the net magnetization increases with Sr doping. Neutron diffraction confirms that the helical magnetic structure remains incommensurate at all values of x, while the fundamental magnetic wavevector increases upon Sr substitution. Lastly, this result demonstrates a chemical-based approach for tuning helical magnetism in quadruple perovskite films and enables future studies of strain and interfacial effects on helimagnetism in oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Thermal fluctuations of ferroelectric nanodomains in a ferroelectric-dielectric PbTiO 3 / SrTiO 3 superlattice

Ferroelectric-dielectric superlattices consisting of alternating layers of ferroelectric PbTiO 3 and dielectric SrTiO 3 exhibit a disordered striped nanodomain pattern, with characteristic length scales of 6 nm for the domain periodicity and 30 nm for the in-plane coherence of the domain pattern. Spatial disorder in the domain pattern gives rise to coherent hard x-ray scattering patterns exhibiting intensity speckles. We show here using variable-temperature Bragg-geometry x-ray photon correlation spectroscopy that x-ray scattering patterns from the disordered domains exhibit a continuous temporal decorrelation due to spontaneous domain fluctuations. The temporal decorrelation can be described using a compressed exponential function, consistent with what has been observed in other systems with arrested dynamics. The fluctuation speeds up at higher temperatures and the thermal activation energy estimated from the Arrhenius model is 0.35±0.21 eV. As a result, the magnitude of the energy barrier implies that the complicated energy landscape of the domain structures is induced by pinning mechanisms and domain patterns fluctuate via the generation and annihilation of topological defects similar to soft materials such as block copolymers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carrier properties of Bi(111) grown on mica and Si(111)

A comparison is presented between properties of Bi(111) films grown by Stranski-Krastanov epitaxy on Si(111) 7 × 7 and by van der Waals epitaxy on mica substrates. Thin film morphologies and electronic transport properties of Bi(111) films of variable thickness are investigated for each growth method. Atomic force micrographs for Bi(111) films on mica reveal clearly defined triangular regions consisting of layered steps with height 0.4 nm, corresponding to the Bi(111) bilayer height. Variable-temperature electronic transport measurements show the existence of a quantum confinement-induced energy gap in the film interiors, resulting in a semimetal-to-semiconductor transition. Magnetotransport analysis in a three-carrier model including metallic electrons in surface states and electrons and holes in the films' interiors provides a detailed study of densities, mobilities, and mean-free paths of the three carrier types. Further, improved electronic transport properties are found in Bi(111) films of higher thickness on mica compared to on Si(111), a likely result of the largely strain-free van der Waals epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atomic-Scale Tracking of Topological Defect Motion and Incommensurate Charge Order Melting

Charge order pervades the phase diagrams of quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides, where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of its relationship with competing phases. Leveraging atomic-resolution variable-temperature cryogenic scanning transmission electron microscopy, we characterize the thermal evolution of charge order as it transforms from its ground state in a model manganite system. We find that mobile networks of discommensurations and dislocations generate phase inhomogeneity and induce global incommensurability in an otherwise lattice-locked modulation. Driving the order to melt at high temperatures, the discommensuration density grows, and regions of order locally decouple from the lattice periodicity. Published by the American Physical Society 2025

Schnitzer, Noah (ORCID:0000000210421146)↗
DOE OSTI2019

Prediction of the J C (B) Behavior of Bi-2212 Wires at High Field

Bi-2212 wires have been produced for much of the last decade with varying architectures, powder sources and great variability of final J c (B) properties. As Bi-2212 transitions from an R&D materials development to a magnet technology, means to predictably forecast J c (B) become increasingly valuable. Here we report on characterizations of short samples having J c (15T, 4.2 K) varying from 1210 to 6560 A/mm 2 , measured in fields up to 31 T, and drawn from 10 billets. Using both 4 K transport and variable temperature VSM measurements capable of probing the 20 K irreversibility field, B irr = μ 0 H k , we discovered that the vortex pinning properties are very stable across these wires, which all used the same standard powder composition (Bi 2.17 Sr 1.94 Ca 0.89 Cu 2.00 O 8+x ), even though it has been made by three different manufacturers over nine years. We conclude that a power-law fit J c ∝ B -α , where α = 0.280 (σ = 0.015), works well at 4.2 K over the field range of at least 3-30 T and that μ 0 H k (20 K) remains stable at 8.6 ± 0.4 T. We conclude that the dominant current limiting mechanism predicting J c (B) in Bi-2212 is the effective filament connectivity. J c (B) at high fields may thus be predicted by simple I c measurements at easily accessible fields in the 3-15 T range.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Combining molecular beam epitaxy and low-energy electron microscopy with in situ magnetic susceptibility measurements within an integrated ultrahigh vacuum system

Quantum two-dimensional materials, including ultrathin superconducting films, are of great current research interest. These films are typically fabricated under ultra-high vacuum (UHV) conditions and are sensitive to the environment—prone to oxidation and contamination when exposed to the atmosphere. This hampers the study of their intrinsic properties by standard ex situ techniques. Here, we present a variable-temperature mutual inductance probe system integrated under UHV with molecular beam epitaxy (MBE) synthesis and low-energy electron microscopy, enabling nondestructive in situ characterization of superconducting thin films. The system employs a reflection-type configuration and reaches a low temperature (∼4 K) using a high-cooling-power, vibration-isolated cryocooler. In conclusion, we demonstrate the system performance by measuring the superconducting critical temperature in a copper-oxide thin film.

2D materials↗