Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transfer Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

The characteristic of evaporative cooling magnet for ECRIS

Compared with traditional de-ionized pressurized-water cooled magnet of ECRIS, evaporative cooling magnet has some special characteristics, such as high cooling efficiency, simple maintenance, and operation. The analysis is carried out according to the design and operation of LECR4 (Lanzhou Electron Cyclotron Resonance ion source No. 4, since July 2013), whose magnet is cooled by evaporative cooling technology. The insulation coolant replaces the de-ionized pressurized-water to absorb the heat of coils, and the physical and chemical properties of coolant remain stable for a long time with no need for purification or filtration. The coils of magnet are immersed in the liquid coolant. For the higher cooling efficiency of coolant, the current density of coils can be greatly improved. The heat transfer process executes under atmospheric pressure, and the temperature of coils is lower than 70 °C when the current density of coils is 12 A/mm{sup 2}. On the other hand, the heat transfer temperature of coolant is about 50 °C, and the heat can be transferred to fresh air which can save cost of water cooling system. Two years of LECR4 stable operation show that evaporative cooling technology can be used on magnet of ECRIS, and the application advantages are very obvious.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

UV-induced dissociation of CH 2 BrI probed by intense femtosecond XUV pulses

The ultraviolet (UV)-induced dissociation and photofragmentation of gas-phase CH 2 BrI molecules induced by intense femtosecond extreme ultraviolet (XUV) pulses at three different photon energies are studied by multi-mass ion imaging. Using a UV-pump–XUV-probe scheme, charge transfer between highly charged iodine ions and neutral CH 2 Br radicals produced by C–I bond cleavage is investigated. In earlier charge-transfer studies, the center of mass of the molecules was located along the axis of the bond cleaved by the pump pulse. In the present case of CH 2 BrI, this is not the case, thus inducing a rotation of the fragment. We discuss the influence of the rotation on the charge transfer process using a classical over-the-barrier model. Our modeling suggests that, despite the fact that the dissociation is slower due to the rotational excitation, the critical interatomic distance for charge transfer is reached faster. Furthermore, we suggest that charge transfer during molecular fragmentation may be modulated in a complex way.

74 ATOMIC AND MOLECULAR PHYSICS↗

Finite-range effects in (d,p) reactions

With the increasing interest in using (d,p) transfer reactions to extract structure and astrophysical information, it is important to evaluate the accuracy of common approximations in reaction theory. Starting from the zero-range adiabatic wave model, which takes into account deuteron breakup in the transfer process, we evaluate the importance of the finite range of the n-p interaction in calculating the adiabatic deuteron wave (as in Johnson and Tandy) as well as in evaluating the transfer amplitude. Our study covers a wide variety of targets, as well as a large range of beam energies. Whereas at low beam energies finite-range effects are small (below 10%), we find these effects to become important at intermediate energies (20 MeV/u) calling for an exact treatment of finite range in the analysis of (d,p) reactions measured at fragmentation facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Wettability Effects on Falling Film Flow and Heat Transfer Over Horizontal Tubes in Jet Flow Mode

The performance of a falling-film heat exchanger is strongly linked to the surface characteristics and the heat transfer processes that take place over the tubes. The primary aim of this numerical study is to characterize the influence of surface wettability on the film flow behavior and its associated surface heat transfer in the jet-flow mode. Volume of fluid (VOF) based simulations are carried out for horizontal tubes with different surface wettabilities. The wettability of the tube surfaces is represented using the Kistler's dynamic contact angle model. Surface wettability effects ranging from superhydrophilic to superhydrophobic are studied by varying the equilibrium contact angle from 2 deg to 175 deg. Two different liquid mass flow rates of 0.06 and 0.18 kg/m-s corresponding to the inline and staggered jet flow modes are studied. Results are presented in terms of the liquid film thickness, the contact areas between the different phases (solid–liquid and liquid–air), and the heat transfer coefficient or Nusselt number. The resistance imposed by the increasing contact angles inhibits the extent of the liquid spreading over the tube surface, and this, in turn, influences the liquid film thickness, and the wetted area of the tube surface. A significant decrement in the heat transfer rate from the tube surfaces was observed as the equilibrium contact angle increased from 2 deg to 175 deg. The local distributions of the Nusselt number over the tube surface are strongly influenced by the flow recirculation in the liquid bulk.

Engineering↗

Marangoni instability induced convection in an evaporating liquid droplet

The processes occurring when a liquid drop undergoes evaporation are described. When a liquid drop undergoes evaporation, its surface temperature decreases. If the droplet is free floating in a microgravity environment, the heat transfer process inside the droplet is initially condition controlled. As the process continues, a radial temperature gradient builds up at the free surface until the critical Marangoni number is exceeded. Then the onset of instability induces thermocapillary convective flows, which in turn speed up the evaporation. The convective flows will subside when the interior of the droplet reaches a certain equilibrium temperature, and the process will return to the diffusion controlled mode. Both preliminary modeling and recent laboratory data have confirmed that Marangoni instability induced convection can and does occur in the droplet evaporation process. Mathematical models representing Marangoni instability in an evaporating liquid drop are presented. An ideal space experiment to study and characterize the onset of Marangoni instability in an evaporating liquid droplet and to establish the effect of Marangoni instability induced convection on the droplet evaporation rate is outlined and the need for conducting such experiments in space is highlighted. However, before an opportunity to conduct experiments in space arises, ground based experiments have to be conducted to study feasibility issues and proof of concept. A ground based experiment of this type is outlined.

Chai, An-Ti↗

A study of forced convection boiling under reduced gravity

This report presents the results of activities conducted over the period 1/2/85-12/31/90, in which the study of forced convection boiling under reduced gravity was initiated. The study seeks to improve the understanding of the basic processes that constitute forced convection boiling by removing the buoyancy effects which may mask other phenomena. Specific objectives may also be expressed in terms of the following questions: (1) what effects, if any, will the removal of body forces to the lowest possible levels have on the forced convection boiling heat transfer processes in well-defined and meaningful circumstances? (this includes those effects and processes associated with the nucleation or onset of boiling during the transient increase in heater surface temperature, as well as the heat transfer and vapor bubble behaviors with established or steady-state conditions); and (2) if such effects are present, what are the boundaries of the relevant parameters such as heat flux, heater surface superheat, fluid velocity, bulk subcooling, and geometric/orientation relationships within which such effects will be produced?

Merte, Herman, Jr.↗

Host absorption sensitizing and energy transfer to Eu³⁺ by Gd³⁺ in Ba₆Gd{sub 2–x}Na₂Eu{sub x}(PO₄)₆F₂

Eu³⁺ activated fluoro-apatite phosphors Ba₆Gd{sub 2–x}Na₂Eu{sub x}(PO₄)₆F₂ were synthesized using the traditional high temperature solid state reaction method, and their VUV–vis spectroscopic properties of Eu³⁺ were studied. The results show that phosphor Ba₆Gd₁.₉₀Na₂Eu₀.₁₀(PO₄)₆F₂ has intense absorption in the VUV range because of Gd³⁺ ions as sensitizers. The energy transfer process from Gd³⁺ to Eu³⁺ in Ba₆Gd{sub 2-x}Na₂Eu{sub x}(PO₄)₆F₂ were investigated and discussed in terms of luminescence spectra and decay curves, showing that the energy transfer of Gd³⁺→Eu³⁺ is efficient. - Graphical abstract: The Gd³⁺ ions can enhance the host-related absorption in VUV range. The energy transfer from Gd³⁺ to Eu³⁺ ions is efficient. Highlights: • The Gd³⁺ ions play an important role in enhancing the host-related absorption in VUV range. • The charge-transfer energy of Eu³⁺ decreases from Ca²⁺ to Sr²⁺ and Ba²⁺ in M₆Gd₁.₉₀Na₂Eu₀.₁₀(PO₄)₆F₂ (M=Ca, Sr, Ba). • There is efficient energy transfer from Gd³⁺ to Eu³⁺ in Ba₆Gd{sub 2–x}Na₂Eu{sub x}(PO₄)₆F₂.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mapping Structural Changes in Electrode Materials: Application of the Hybrid Eigenvector-Following Density Functional Theory (DFT) Method to Layered Li 0.5 MnO 2

The migration mechanism associated with the initial layered-to-spinel transformation of partially delithiated layered LiMnO 2 was studied using hybrid eigenvector-following coupled with density functional theory. The initial part of the transformation mechanism of Li 0.5 MnO 2 involves the migration of Li into both octahedral and tetrahedral local minima within the layered structure. The next stage of the transformation process involves the migration of Mn and was found to occur through several local minima, including an intermediate square pyramidal MnO 5 configuration and an independent Mn 3+ to Mn 2+ charge-transfer process. The migration pathways were found to be significantly affected by the size of the supercell used and the inclusion of a Hubbard U parameter in the DFT functional. The transition state searching methodology described should be useful for studying the structural rearrangements that can occur in electrode materials during battery cycling, and more generally, ionic and electronic transport phenomena in a wide range of energy materials.

25 ENERGY STORAGE↗

First-Principles Study of Charge Carrier Dynamics with Explicit Treatment of Momentum Dispersion on Si Nanowires along <211> crystallographic Directions

ABSTRACT The ground state structure, optical properties and charge carrier dynamics of silicon nanowire (SiNW) grown in <211> crystallographic direction is studied as a function of wavevector using density functional theory. This nanowire can be used as fundamental unit of nanoelectronic devices. The optical properties are computed under assumption of momentum conservation $\Delta \vec{k} = 0$ . The on-the-fly non-adiabatic couplings for electronic degrees of freedom are obtained along the ab initio molecular dynamics nuclear trajectories, which are used as parameters for Redfield density matrix equation of motion. By investigating the photo-induced process on this nanowire, it is shown that high-energy photoexcitation relaxes to the band gap edge within 75 ps. The results of these calculations help to understand the mechanism of electron transfer process on the Si nanowire.

Fatima↗

Computational modeling of the pressurization process in a NASP vehicle propellant tank experimental simulation

A multidimensional computational model of the pressurization process in a slush hydrogen propellant storage tank was developed and its accuracy evaluated by comparison to experimental data measured for a 5 ft diameter spherical tank. The fluid mechanic, thermodynamic, and heat transfer processes within the ullage are represented by a finite-volume model. The model was shown to be in reasonable agreement with the experiment data. A parameter study was undertaken to examine the dependence of the pressurization process on initial ullage temperature distribution and pressurant mass flow rate. It is shown that for a given heat flux rate at the ullage boundary, the pressurization process is nearly independent of initial temperature distribution. Significant differences were identified between the ullage temperature and velocity fields predicted for pressurization of slush and those predicted for pressurization of liquid hydrogen. A simplified model of the pressurization process was constructed in search of a dimensionless characterization of the pressurization process. It is shown that the relationship derived from this simplified model collapses all of the pressure history data generated during this study into a single curve.

Sasmal, G. P.↗

Multi-dimensional modeling of pressurization and expulsion of multi-phase hydrogen propellant

A multidimensional computational model of the pressurization process in a slush hydrogen propellant storage tank was developed and its accuracy evaluated by comparison to experimental data measured for a 5 ft diameter spherical tank. The fluid mechanic, thermodynamic, and heat transfer processes within the ullage are represented by a finite-volume model. the heat and mass fluxes at the ullage boundary were computed in auxiliary analyses and specified as input to the finite-volume model. the model was shown to be in reasonable agreement with the experimental data. A parameter study was undertaken to examine the dependence of the pressurization process on initial ullage temperature distribution and pressurant mass flow rate. It is shown that for a given heat flux rate at the ullage boundary, the pressurization process is nearly independent of initial temperature distribution. The mass flow rate study revealed decreasing pressurant mass requirements with increasing pressurant mass flow rate. Further, significant differences were identified between the ullage temperature and velocity fields predicted for pressurization of slush and those predicted for pressurization of liquid hydrogen. A simplified model of the pressurization process was constructed in search of a dimensionless characterization of the pressurization process. It is shown that the relationship derived from this simplified model collapses all of the pressure history data generated during this study into a single curve.

Source record↗

A Comparison of Electron-Transfer Dynamics inIonic Liquids and Neutral Solvents

The effect of ionic liquids on photoinduced electron-transfer reactions in a donor-bridge-acceptor system is examined for two ionic liquid solvents, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide and tributylmethylammonium bis(trifluoromethylsulfonyl)amide. The results are compared with those for the same system in methanol and acetonitrile solution. Electron-transfer rates were measured using time-resolved fluorescence quenching for the donor-bridge-acceptor system comprising a 1-N,1-N-dimethylbenzene-1,4-diamine donor, a proline bridge, and a coumarin 343 acceptor. The photoinduced electron-transfer processes are in the inverted regime (-{Delta}G > {lambda}) in all four solvents, with driving forces of -1.6 to -1.9 eV and estimated reorganization energies of about 1.0 eV. The observed electron-transfer kinetics have broadly distributed rates that are generally slower in the ionic liquids compared to the neutral solvents, which also have narrower rate distributions. To describe the broad distributions of electron-transfer kinetics, we use two different models: a distribution of exponential lifetimes and a discrete sum of exponential lifetimes. Analysis of the donor-acceptor electronic coupling shows that for ionic liquids this intramolecular electron-transfer reaction should be treated using a solvent-controlled electron-transfer model.

10 SYNTHETIC FUELS↗

Analysis of Mass Distribution of Fission Fragment in Superheavy Mass Region

Recently our FLNR theoretical group completes a calculation model to treat all reaction processes in heavy and superheavy mass region, which is so called 'Unified model'. Using a lot of available experimental data, we verify the validity of our model and establish a reliable model to describe the whole reaction process. As examples of the application of our model, we discuss two cases that are quasi-fission process and deep inelastic collision. We show the calculation results of the mass distribution of fission fragments in the reaction {sup 36}S+{sup 236}U. Also, we discuss the possibility for the production of new heavy neutron-rich nuclei in the low-energy multi-neutron transfer process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Linear and nonlinear evolution of the ion resonance instability in cylindrical traps: A numerical study

Numerical experiments have been performed to investigate the linear and nonlinear dynamics, and energetics of the ion resonance instability in cylindrically confined nonneutral plasma. The instability is excited on a set of parametrically different unstable equilibria of a cylindrical nonneutral cloud, composed of electrons partially neutralized by a much heavier ion species of single ionization. A particle-in-cell code has been developed and employed to carry out these simulations. The results obtained from the initial exponential growth phase of the instability in these numerical experiments are in agreement with the linearised analytical model of the ion resonance instability. As the simulations delve much further in time beyond the exponential growth phase, very interesting nonlinear phenomena of the ion resonance instability are revealed, such as a process of simultaneous wave breaking of the excited poloidal mode on the ion cloud and pinching of the poloidal perturbations on the electron cloud. This simultaneous nonlinear dynamics of the two components is associated with an energy transfer process from the electrons to the ions. At later stages there is heating induced cross-field transport of the heavier ions and tearing across the pinches on the electron cloud followed by an inverse cascade of the torn sections.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Organic Separation Test Results

Separable organics have been defined as “those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer” (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be “no visible layer” of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.

complexants↗

Feasibility of full-core pin resolved CFD simulations of small modular reactor with momentum sources

Complex flow structure interactions and heat transfer processes take place in nuclear reactor cores. Given the extreme pressure/temperature and radioactive conditions inside the core, numerical simulations offer an attractive and sometimes more feasible approach to study the related flow and heat transfer phenomena in addition to the experiments. Under the Exascale Computing Project, the full-core simulation of a small modular reactor (SMR) has been pursued coupling Computational Fluid Dynamics (CFD) and neutronics. A key aspect of the modeling of SMR fuel assemblies is the presence of spacer grids and the mixing promoted by mixing vanes or the equivalent. A reduced order methodology is adopted based on momentum sources to mimic the mixing of the vanes. The momentum sources have been carefully calibrated with detailed Large Eddy Simulations (LES) of spacer grids performed with Nek5000. Modeling the spacer grid and mixing vanes (SGMV) effect without body-fitted computational grid avoids the excessive costs in resolving the local geometric details, and thus supports the simulation to be scaled up to the full core. Besides the progress on momentum source modeling, this paper also features the first full-core pin resolved CFD simulation ever performed to the authors' knowledge. This represents a significant advancement in capability for the CFD of nuclear reactors, which will hopefully serve as an inspiration for further integrating high-fidelity numerical simulations in actual engineering designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

One-step patterning of double tone high contrast and high refractive index inorganic spin-on resist

A direct one-step and low temperature micro-fabrication process, enabling to realize large area totally inorganic TiO₂ micro-patterns from a spin-on resist, is presented. High refractive index structures (up to 2 at 632 nm) without the need for transfer processes have been obtained by mask assisted UV lithography, exploiting photocatalytic titania properties. A distinctive feature not shared by any of the known available resists and boosting the material versatility, is that the system behaves either as a positive or as negative tone resist, depending on the process parameters and on the development chemistry. In order to explain the resist double tone behavior, deep comprehension of the lithographic process parameters optimization and of the resist chemistry and structure evolution during the lithographic process, generally uncommon in literature, is reported. Another striking property of the presented resist is that the negative tone shows a high contrast up to 19, allowing to obtain structures resolution down to 2 μm wide. The presented process and material permit to directly fabricate different titania geometries of great importance for solar cells, photo-catalysis, and photonic crystals applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Replication of x-ray blazed gratings by nano-inscribing.

A nano-inscribing technique was tested as a method of cost-effective replication of blazed diffraction gratings for x-rays. A saw-tooth mold for the nano-inscribing was fabricated by a double-replication process from a master blazed grating. The nano-inscribing was performed using a UV-curable resist of low viscosity to provide a small thickness of the resist replicas, required for a following transfer process. The nano-inscribing process was optimized to minimize surface relaxation and preserve the saw-tooth shape of the grooves, required for high diffraction efficiency. The quality of the replica gratings was evaluated via diffraction efficiency simulations. The simulations demonstrated that near theoretical efficiency can be achieved for the x-ray gratings made by the nano-inscribing approach.

blazed grating↗