Search NASA⌕ Search

SEARCH · Search NASA

Results for “W wall”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Thermomechanical Relaxation of Vibrationally Excited NO in a Hypersonic Turbulent Boundary Layer

The effects of thermal nonequilibrium are studied using a DC glow discharge plasma to selectively modify the vibrational temperature of an otherwise cold flow. These experiments were performed at 𝑴=5.7and 𝑹𝒆=6×10 6 /m in the Actively Controlled Expansion tunnel at Texas A&M University on a canonical 2.75° half-angle wedge test article. A∼47 W plasma was generated across spanwise electrodes, and removable trips produced either a laminar or turbulent boundary layer. NO planar laser-induced fluorescence (PLIF) quantified the extent of the NO 𝑿 2 𝚷 (𝒗=1) vibrational perturbation due to the plasma and its subsequent interplay with the boundary layer, the first such data of which the authors are aware. NOPLIF measurements were taken at three locations along the test article, and quasi-temperature measurements are reported at each. Despite not quantifiably perturbing the boundary layer, the plasma was shown to alter the NO vibrational temperature profile therein. Independent analysis of the thermodynamics and fluid mechanics of the system suggests each set of physics could explain the results observed near and far from the wall, respectively.

Casey J. Broslawski↗
NASA NTRSDate not supplied

Thermomechanical Relaxation of Vibrationally Excited NO in a Hypersonic Turbulent Boundary Layer

The effects of thermal nonequilibrium are studied using a DC glow discharge plasma to selectively modify the vibrational temperature of an otherwise cold flow. These experiments were performed at 𝑴=5.7and 𝑹𝒆=6×10 6 /m in the Actively Controlled Expansion tunnel at Texas A&M University on a canonical 2.75° half-angle wedge test article. A∼47 W plasma was generated across spanwise electrodes, and removable trips produced either a laminar or turbulent boundary layer. NO planar laser-induced fluorescence (PLIF) quantified the extent of the NO 𝑿 2 𝚷 (𝒗=1) vibrational perturbation due to the plasma and its subsequent interplay with the boundary layer, the first such data of which the authors are aware. NOPLIF measurements were taken at three locations along the test article, and quasi-temperature measurements are reported at each. Despite not quantifiably perturbing the boundary layer, the plasma was shown to alter the NO vibrational temperature profile therein. Independent analysis of the thermodynamics and fluid mechanics of the system suggests each set of physics could explain the results observed near and far from the wall, respectively.

Casey J. Broslawski↗
DOE OSTI2022

Reassessing energy deposition for the ITER 5 MA vertical displacement event with an improved DINA model

The beryllium (Be) main chamber wall interaction during a 5 MA/1.8 T upward, unmitigated VDE scenario, first analysed in [J. Coburn et al., Phys. Scr. T171 (2020) 014076] for ITER, has been re-evaluated using the latest energy deposition analysis software. Updates to the DINA disruption model are summarized, including an improved numerical convergence for the 0D power balance, limitations on the safety factor within the plasma core, and the choice to maintain a constant plasma +halo poloidal cross-section. Such updates result in a broad halo region and higher radiated power fractions compared to previous models. The new scenario lasts for ~75 ms and deposits ~29 MJ of energy, with the radial distribution of parallel heat flux q‖(r)resembling an exponential falloff with an effective λ_q=75-198 mm. A maximum halo width w_h of 0.52 m at the outboard midplane is observed. SMITER field line tracing and energy deposition simulations calculate a q_{⊥,max} of ~83 MW/m^2 on the upper first wall panels (FWP). Heat transfer calculations with the MEMOS-U code show that the FWP surface temperature reaches ~1000 K, well below the Be melt threshold. Variations of this 5 MA scenario with Be im-purity densities from 0 to 3∙10^19 m^-3 also remain below the melt threshold despite differences in energy deposition and duration. These results are in contrast to the early study which predicted melt damage to the first wall [J. Coburn et al., Phys. Scr. T171 (2020) 014076], and emphasize the importance of accurate models for the halo width w_h and the heat flux distribution q‖(r)within that halo width. The 2020 halo model in DINA has been compared with halo current experiments on COMPASS, JET, and Alcator C-Mod, and the preliminary results build confidence in the broad halo width predictions. Results for the 5 MA VDE are compared with those for a 15 MA equivalent, generated using the new DINA model. At the higher current, significant melting of the upper FWP is to be expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

The aerothermodynamic environment of the Apollo command module during superorbital entry

Aerothermodynamic measurements were obtained on two Apollo spacecraft during atmospheric entry at near-lunar-return velocities. Histories of measured pressure and of convective and radiative heating rates are compared with theoretical predictions and with wind-tunnel results. The comparisons show that pressures measured in the wind tunnel correspond to those measured in the flight environment of the entry face. Unexplained low pressures were obtained on the conical section. Measured radiative heating rates agree with predictions calculated for both visible and infrared radiation. Good agreement was found between convective heating rates measured in flight and predictions obtained by using cold wall theory adjusted for mass injection from the ablator.

Lee, D. B.↗
NASA NTRS1975

Influence of probe contamination on recombination of atomic hydrogen

Atomic hydrogen concentration profiles were measured through a screen-stabilized one-dimensional propane/oxygen front using a specially modified electron spin resonance (ESR) spectrometer. The ESR line occurring at 3075.5 G at 9261.2 MHz was monitored in the presence and absence of various halogenated hydrocarbons. A significant cumulative decrease in peak intensity occurred with addition of any halogenated compound. Further results suggest that the effect is due to inhibitor action on the transport tube walls followed by changes in atomic hydrogen interaction with the walls, and that hydrogen decay is nonlinear in the halogenated tube.

Collins, L. W.↗
NASA NTRS1977

A critical evaluation of invariant second-order closure models for subsonic boundary layers

Computations based on several second-order turbulence models, including full Reynolds stress and two-equation models, are compared with a number of boundary-layer experiments. In general, the models represent the data reasonably well, with skin friction tending to be somewhat overpredicted in the far downstream region of the adverse pressure gradient experiments. A discussion of the behavior of the ARAP full Reynolds stress model in predicting the components of the Reynolds stress tensor is given. It is concluded that compatibility at the wall may necessitate the use of more than one length scale.

Rubesin, M. W.↗
NASA NTRS1977

Effects of scaled heatshield tile misalignment on Orbiter boundary-layer transition

The article addresses the problem of assessing the sensitivity of the heat transfer rate of a Space Orbiter windward surface and boundary-layer transition data to surface features, or 'roughness elements', characteristic of randomly misaligned heat shield tiles. Selected heat shield tiles were precision-formed on the surface of a 0.0175-scale Orbiter model. Selective electroless plating and selective electrochemical etching techniques were employed. Effects of roughness on the location of boundary-layer transition were markedly influenced by the wall-to-total temperature ratios, according to wind-tunnel test results.

Goodrich, W. D.↗
NASA NTRS1978

System for the measurement of ultra-low stray light levels

An apparatus is described for measuring the effectiveness of stray light suppression light shields and baffle arrangements used in optical space experiments and large space telescopes. The light shield and baffle arrangement and a telescope model are contained in a vacuum chamber. A source of short, high-powered light energy illuminates portions of the light shield and baffle arrangement and reflects a portion of same to a photomultiplier tube by virtue of multipath scattering. The resulting signal is transferred to time-channel electronics timed by the firing of the high energy light source allowing time discrimination of the signal thereby enabling the light scattered and suppressed by the model to be distinguished from the walls and holders around the apparatus.

Wyman, C. L.↗
NASA NTRS1984

Matter antimatter domains: A possible solution to the CP domain wall problem in the early universe

An SU(5) grand unified theory model is used to show how the degeneracy between vacua with different spontaneously broken charge parity can be dynamically lifted by a condensate of heavy fermion pairs. This drives a phase transition to a unique vacuum state with definite charge parity. The transition eliminates the domain walls in a matter antimatter symmetric domain cosmology.

Mohanty, A. K.↗
NASA NTRS1988

Extrema principles of entrophy production and energy dissipation in fluid mechanics

A survey is presented of several extrema principles of energy dissipation as applied to problems in fluid mechanics. An exact equation is derived for the dissipation function of a homogeneous, isotropic, Newtonian fluid, with terms associated with irreversible compression or expansion, wave radiation, and the square of the vorticity. By using entropy extrema principles, simple flows such as the incompressible channel flow and the cylindrical vortex are identified as minimal dissipative distributions. The principal notions of stability of parallel shear flows appears to be associated with a maximum dissipation condition. These different conditions are consistent with Prigogine's classification of thermodynamic states into categories of equilibrium, linear nonequilibrium, and nonlinear nonequilibrium thermodynamics; vortices and acoustic waves appear as examples of dissipative structures. The measurements of a typical periodic shear flow, the rectangular wall jet, show that direct measurements of the dissipative terms are possible.

Horne, W. Clifton↗
NASA NTRS1988

Extrema principles of entropy production and energy dissipation in fluid mechanics

A survey is presented of several extrema principles of energy dissipation as applied to problems in fluid mechanics. An exact equation is derived for the dissipation function of a homogeneous, isotropic, Newtonian fluid, with terms associated with irreversible compression or expansion, wave radiation, and the square of the vorticity. By using entropy extrema principles, simple flows such as the incompressible channel flow and the cylindrical vortex are identified as minimal dissipative distributions. The principal notions of stability of parallel shear flows appear to be associated with a maximum dissipation condition. These different conditions are consistent with Prigogine's classification of thermodynamic states into categories of equilibrium, linear nonequilibrium, and nonlinear nonequilibrium thermodynamics; vortices and acoustic waves appear as examples of dissipative structures. The measurements of a typical periodic shear flow, the rectangular wall jet, show that direct measurements of the dissipative terms are possible.

Horne, W. Clifton↗
NASA NTRS1990

CARS temperature measurements in a hypersonic propulsion test facility

Static-temperature measurements performed in a reacting vitiated air-hydrogen Mach-2 flow in a duct in Test Cell 2 at NASA LaRC by using a coherent anti-Stokes Raman spectroscopy (CARS) system are discussed. The hypersonic propulsion Test Cell 2 hardware is outlined with emphasis on optical access ports and safety features in the design of the Test Cell. Such design considerations as vibration, noise, contamination from flow field or atmospheric-borne dust, unwanted laser- and electrically-induced combustion, and movement of the sampling volume in the flow are presented. The CARS system is described, and focus is placed on the principle and components of system-to-monochromator signal coupling. Contour plots of scramjet combustor static temperature in a reacting-flow region are presented for three stations, and it is noted that the measurements reveal such features in the flow as maximum temperature near the model wall in the region of the injector footprint.

Jarrett, O., Jr.↗
NASA NTRS1991

MLITemp: A computer program to predict the thermal effects associated with hypervelocity impact damage to space station MLI

A family of user-friendly, DOS PC based, Microsoft BASIC programs written to provide spacecraft designers with empirical predictions of space debris damage to orbiting spacecraft are described. Spacecraft wall temperatures and condensate formation is also predicted. The spacecraft wall configuration is assumed to consist of multilayered insulation (MLI) placed between a Whipple style bumper and the pressure wall. Impact damage predictions are based on data sets of experimental results obtained from simulating debris impacts on spacecraft using light gas guns on earth. A module of the program facilitates the creation of the database of experimental results that is used by the damage prediction modules to predict damage to the bumper, the MLI, and the pressure wall. A finite difference technique is used to predict temperature distributions in the pressure wall, the MLI, and the bumper. Condensate layer thickness is predicted for the case where the pressure wall temperature drops below the dew point temperature of the spacecraft atmosphere.

Rule, W. K.↗
NASA NTRS1995

Metal colloids and semiconductor quantum dots: Linear and nonlinear optical properties

One aspect of this project involves a collaborative effort with the Solid State Division of ORNL. The thrust behind this research is to develop ion implantion for synthesizing novel materials (quantum dots wires and wells, and metal colloids) for applications in all optical switching devices, up conversion, and the synthesis of novel refractory materials. In general the host material is typically a glass such as optical grade silica. The ions of interest are Au, Ag, Cd, Se, In, P, Sb, Ga and As. An emphasis is placed on host guest interactions between the matrix and the implanted ion and how the matrix effects and implantation parameters can be used to obtain designer level optical devices tailored for specific applications. The specific materials of interest are: CdSe, CdTe, InAs, GaAs, InP, GaP, InSb, GaSb and InGaAs. A second aspect of this research program involves using porous glass (25-200 A) for fabricating materials of finite size. In this part of the program, we are particularly interested in characterizing the thermodynamic and optical properties of these non-composite materials. We also address how phase diagram of the confined material is altered by the interfacial properties between the confined material and the pore wall.

Henderson, D. O.↗