Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic fabrication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Millimeter-Scale Exfoliation of hBN with Tunable Flake Thickness for Scalable Encapsulation

As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. In this report we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices.

2D materials↗
DOE OSTI2020

Panel Session 34: US DOE Featured Site: Savannah River Operations Office: 70 Years of Service

The Savannah River Site celebrates its 70. anniversary on November 28, 2020. On this date in 1950, President Harry S. Truman requested the Dupont Company to design, build and operate what was then known as the Savannah River Plant in response to the Soviet Union's detonation of its first atomic weapon, which set the Cold War into motion. During the 1950's, six South Carolina towns were relocated for the construction of SRS and by 1953, the 310 square mile site was complete. Nearly 40,000 workers were employed t build five nuclear reactors and support facilities, two chemical separations plants, heavy water extraction plant, nuclear fuel and target fabrication facility tritium extraction facility and waste management facilities. SRS played a key role in winning the Cold War and for seven decades, SRS has been a leader within the DOE complex. Today, the site supports environmental stewardship and maintains the nation's nuclear deterrent while ensuring the safekeeping and disposal of domestic and international nuclear materials. The site continues to support the nation's nuclear defense as it explores new potential NNSA missions. SRS has a proud 70- year history and looks forward to a future of service as a national asset and strong community partner. The session was kicked off with a video message from Secretary of Energy, Dan Brouillette, who thanked employees past and current for their efforts. The video also provided an overview of the history and future of the Site. This panel provided an overview of the Savannah River Site's 70 years of service (history, challenges, opportunities, and future) presented by the SRS's Senior leadership and the local Aiken, South Carolina Mayor. Panelists with presentations: US DOE Secretary Dan Brouillette's Overview of DOE and SRS - A Legacy of 70 Years of Service (Amy Boyette); 70 Years of Service (Michael Budney); 70 Years of Service (Stuart MacVean); SRS Liquid Waste (Thomas Foster); National Nuclear Security Administration (Nicole Nelson-Jean)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Synthetic Metal Atomic Layer Deposition Tool (Final Report)

As part of the Cyclotron Road program, Laminera Inc. worked towards development of atomic layer deposition process customizations and tool modifications to produce synthetic metal films at commercial scale and improve the film quality. Today's state-of-the-art in atomic layer deposited synthetic metal technology is only possible at a research-scale because current tools have practical limitations for scaling industrially and generating high conductivity films. Ultrathin, conformal synthetic metal films have many possible applications such as high surface area nanoporous electrodes for supercapacitors and water desalination devices; protective electrode coatings for electrochemical devices; seed layers for semiconductor device fabrication; or metallic component stabilizing coatings that enable enhanced storage density in next generation hard disk drives. The best synthetic metal conductive and plasmonic properties have been demonstrated using sputtering, which relies on high temperature sputtering with substrate dependent and directional growth limiting usage. This work explored refining process and tool modifications to create ultrathin, conformal, synthetic metal films that can be deposited with high quality over complex three-dimensional surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Protection layers for metal anodes

A protection layer is formed on a highly-reactive substantially-pure metal anode to a thickness of between 1 nm and 200 nm, inclusive, using atomic layer deposition (ALD). The ALD protection layer allows the conduction of ions of the metal of the anode therethrough but suppresses electron transport therethrough. The ALD protection layer may also be effective to inhibit passage of air and/or water therethrough. The ALD protection layer can allow more relaxed purity requirements for subsequent battery assembly, electrolyte specifications, and/or cathode gas purity. Fabrication methods for the protection layers, protected metal anodes, and systems and devices incorporating such protected metal anodes are also disclosed herein.

Kozen, Alexander C.↗
DOE OSTI2023

Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies

Abstract The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest‐neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest‐neighbor interactions. This method uses a Langmuir–Schaefer‐type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π‐conjugated molecules. Using UV–vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi‐Langmuir layers and enables the production of films with defined morphology. The variation in nearest‐neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square‐wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In situ Study on the Evolution of Atomic and Electronic Structure of LaTiO 3 /SrTiO 3 System

As with other transition-metal oxide interfaces, LaTiO 3 /SrTiO 3 interfaces exhibit interesting electronic properties, such as a two-dimensional electron gas. While the available Mott states and multiple pathways to metallicity in LaTiO 3 can lead to a variety of applications in oxide electronics, the origin of the different properties remains uncertain. Herein, utilizing real-time, in situ x-ray diffraction at the synchrotron, robust but thin LaTiO 3 /SrTiO 3 heterostructures were fabricated using oxide molecular beam epitaxy. A thickness of six unit cells was determined to be critical, at which point the LaTiO 3 /SrTiO 3 heterostructures begin to sustain sharp, well-defined interfaces. The layers of LaTiO 3 and SrTiO 3 were sufficiently thin to benefit from the finite escape length of electrons at resonant soft x-ray photoemission, and the heterostructures were transferred in vacuo after growth to another chamber for synchrotron-based x-ray photoemission spectroscopy studies. With the x-ray energy tuned to the Ti-2p resonance, the LaTiO 3 /SrTiO 3 interfaces could be probed with enough penetration depth and selectivity. It is shown that all of the heterointerfaces exhibit the two-dimensional electron gas.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Structural Origin of Chiroptical Properties in Perovskite Nanocrystals with Chiral Organic Ligands

Abstract The authors investigate how chiral ligands attached to perovskite nanocrystal (PNC) surfaces structurally distort the perovskite lattice. Chiral electro‐optical properties of the resulting PNCs are demonstrated through the fabrication of a circularly polarized light (CPL) detector with a discrimination of up to 14% between left‐ and right‐handed CPL. Both experimental and electronic‐structure‐based simulations are combined to provide insights into the interactions (both structural and electronic) between chiral organic ligands and PNCs. The major finding is a centro‐asymmetric distortion of the surface lattice that penetrates up to five atomic unit cells deep into the PNCs, which is the likely cause of the chiral‐optical properties. Spin‐polarized transport through chiral‐PNCs results from the chiral‐induced spin selectivity effect and amplifies the discrimination between left and right‐handed CPL as is experimentally demonstrated in the detectors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multimorphic Materials: Spatially Tailoring Mechanical Properties via Selective Initiation of Interpenetrating Polymer Networks

Access to multimaterial polymers with spatially localized properties and robust interfaces is anticipated to enable new capabilities in soft robotics, such as smooth actuation for advanced medical and manufacturing technologies. Here, orthogonal initiation is used to create interpenetrating polymer networks (IPNs) with spatial control over morphology and mechanical properties. Base catalyzes the formation of a stiff and strong polyurethane, while blue LEDs initiate the formation of a soft and elastic polyacrylate. IPN morphology is controlled by when the LED is turned “on”, with large phase separation occurring for short time delays (≈1–2 min) and a mixed morphology for longer time delays (>5 min), which is supported by dynamic mechanical analysis, small angle X-ray scattering, and atomic force microscopy. Through tailoring morphology, tensile moduli and fracture toughness can be tuned across ≈1–2 orders of magnitude. Furthermore, a simple spring model is used to explain the observed mechanical behavior. Photopatterning produces “multimorphic” materials, where morphology is spatially localized with fine precision (<100 µm), while maintaining a uniform chemical composition throughout to mitigate interfacial failure. As a final demonstration, the fabrication of hinges represents a possible use case for multimorphic materials in soft robotics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of substrate temperature on the growth of Nb 3 Sn film on Nb by multilayer sputtering

Here, we report on the fabrication of niobium tin (Nb 3 Sn) films by multilayer sequential sputtering on niobium at substrate temperatures ranging from room temperature to 250 °C. The multilayers were then annealed inside a separate vacuum furnace at 950 °C for 3 h. The material properties of the films were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, and transmission electron microscopy. The superconducting properties of the films were studied by four-point probe resistivity measurements from room temperature to below the superconducting critical temperature T c . The highest film T c was 17.76 K, obtained when the multilayers were deposited at room temperature. When the deposition temperature was raised to 250 °C, a significant reduction in voids was achieved while the film's T c was 17.58 K.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Two-Step Thermoresponsive Ultrafiltration Membranes from Polymerization of Lyotropic Liquid Crystals

Here, in this study, we present the fabrication of a two-step thermoresponsive ultrafiltration (UF) membrane through polymerization of a lyotropic liquid crystal (LLC). A mixture of commercially available Pluronic F 127 block copolymer, water (containing ammonium persulfate as the initiator), and polymerizable oil (n-butyl acrylate/ethylene glycol dimethacrylate) is used to create an LLC with a lamellar structure, as characterized by cross-polarized light microscopy and atomic force microscopy. Differential scanning calorimetry is employed to evaluate the thermoresponsive behavior of the polymerized LLC (polyLLC). Two-step thermoresponsiveness (~35 and ~50 °C) of the polyLLC is observed due to the lower critical solution temperature (LCST) of F 127 and melting of the crystalline structure of the polyethylene oxide (PEO) chains of the F 127 surfactant. In the next step, the obtained mesophase is cast on a nonwoven polyester support sheet followed by thermal polymerization. The hydration capacity, water flux, water flux recovery after fouling, and molecular weight cutoff (MWCO) of the obtained membrane are evaluated at different temperatures to examine its thermoresponsiveness. The experimental results reveal that the UF membrane has a reversible thermoresponsive behavior at the LCST and PEO melting of polyLLC. Additionally, the cleaning efficiency of the fouled membrane can be enhanced by using its thermoresponsive behavior, resulting in an extended lifetime of the product. Furthermore, the MWCO of the membrane can be altered with temperature due to the pore size change with temperature stimulus.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hierarchical Epoxy Structures via Tunable Polymerization-Induced Phase Separation Combined with Additive Manufacturing

Polymerization-induced phase separation (PIPS) allows for the control of thermoset morphologies and properties, enabling the tuning of domain sizes and thermomechanical response. However, its use in generating substructural features in additively manufactured materials has been limited. In this work, we combine epoxy PIPS with UV curable acrylate and rheological modifiers to print nano- to macro-phase separating materials via a two-step, dual-cure approach. This method enables direct ink write printing of hierarchical structures with both controlled morphologies through phase separation and macroscale architecture through print design. We find that formulations for phase-separating materials require judicious incorporation of additives to enable printability and to provide sufficient green strength. Atomic force microscopy-nano infrared mapping reveals tunable, reticulated nano- to micron-scale domains of the resultant multiphase materials and their morphology changes due to additives, resulting in alterations to thermomechanical and tensile properties. Shape memory behavior is also demonstrated through multimaterial additive manufacturing of epoxies with functionally graded internal morphology using active mixing techniques, highlighting this method’s ability to fabricate complex architectures with controlled morphologies and thermomechanical response.

Van Meter, Kylie E [Organic Materials Science, San↗
DOE OSTI2025

Optical design and efficiency measurement of an extreme ultraviolet high-resolution spectrometer for unresolved transition array research

Understanding the structures of the unresolved transition array (UTA) observed in extreme ultraviolet (EUV) spectra from many-electron atoms is crucial for various applications, including fusion science and nanolithography. Here, to measure the fine structure of the UTA from tungsten and tin at around 5 and 13.5 nm at the Tokyo electron beam ion trap, we developed a high-resolution EUV spectrometer. The designed spectrometer achieves a resolving power of λ/dλ > 5000 at 5 and 13.5 nm. The fabricated large-area grating was experimentally examined at beamline BL5B of the UVSOR synchrotron facility to evaluate the diffraction efficiencies and their variation across the ruled area. The measured diffraction efficiencies are 0.65% ± 0.07% at 5 nm (second order) and 7.9% ± 0.2% at 13.5 nm (first order). The variation in the diffraction efficiency across the ruled area is 2.2%, 13.6%, and 10.0% in zeroth, first, and second order diffractions, respectively. The discrepancies in diffraction efficiencies between the experiments and the calculations were 5.2%, 29%, and 35% for the zeroth, first, and second diffraction orders, respectively.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Quantitative characterization of ZrO2 gate dielectric interface with tellurium

Tellurium (Te) has recently emerged as a promising p-type semiconductor that can be processed at low temperatures, compatible with back end of line CMOS integration. Characterization of tellurium–dielectric interfaces is essential for further device advancements. Here, the interface quality of Te with ZrO2 gate dielectric is studied in a metal-oxide semiconductor capacitor structure. The interface trap density (Dit) is measured as a function of atomic layer deposition (ALD) temperature, without the use of a seed layer. Given the low thermal budget of Te, the ALD temperature is shown to be particularly important. The lowest Dit of 5 × 1012 states/cm2 eV is obtained at a low ALD process temperature of 120 °C. To further assess the impact of Dit on device performance, field-effect transistors (FETs) were fabricated. The subthreshold swing and effective hole mobility of the FETs were analyzed in relation to Dit, emphasizing the importance of a defect-minimized interface for enhancing Te transistor performance.

Byeon, Kyeong-Jae↗
DOE OSTI2021

Fast switching magnet for heavy ion beam separation

This paper presents the design for a switching magnet capable of deflecting 6.5 MeV/u heavy-ion beams with mass-to-charge ratio of 7 by 10 degrees. This magnet can produce variable flat-top pulses from 1 to 30 ms with rise and fall times of less than 0.5 ms at a variable duty cycle of 3–91% into a heavily inductive load. The magnet has a laminated, iron dominated, H-shaped core. Directly-cooled copper pancake coils energize the magnet. We present the magnet design considerations, including the results of extensive computer modeling. Finally, we also present the conceptual engineering design and the studies of magnet yoke fabrication.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Impact of hydrogenation on the stability and mechanical properties of amorphous boron nitride

Abstract Interconnect materials with ultralow dielectric constant, and good thermal and mechanical properties are crucial for the further miniaturization of electronic devices. Recently, it has been demonstrated that ultrathin amorphous boron nitride (aBN) films have a very low dielectric constant, high density (above 2.1 g cm −3 ), high thermal stability, and mechanical properties. The excellent properties of aBN derive from the nature and degree of disorder, which can be controlled at fabrication, allowing tuning of the physical properties for desired applications. Here, we report an improvement in the stability and mechanical properties of aBN upon hydrogen doping. With the introduction of a Gaussian approximation potential for atomistic simulations, we investigate the changing morphology of aBN with varying H doping concentrations. We found that for 8 at% of H doping, the concentration ofsp 3 -hybridized atoms reaches to a maximum which leads to an improvement of thermal stability and mechanical properties by 20%. These results will be a guideline for experimentalists and process engineers to tune the growth conditions of aBN films for numerous applications.

Materials Science↗
DOE OSTI2026

In-situ synchrotron X-ray investigation of phase evolution in gas atomized powder enabling manufacturing of nanoscale oxide-dispersion strengthened ferritic steels

Here, we present an investigation of Fe-14Cr-3W-0.4Y-0.4Zr-0.18Ti (wt.%) as a reduced-activation oxide-dispersion strengthened (ODS) ferritic steel, an alternative to the “14YWT” structural alloys designed for nuclear energy applications. Gas atomization reaction synthesis (GARS) was used to produce these Zr-modified powders with a non-equilibrium (metastable) phase that enable a heat treatment (delayed) route for producing nanoscale oxide-dispersion strengthening. In situ synchrotron X-ray diffraction and transmission electron microscopy were used to analyze phase evolution as a function of temperature and time, revealing formation of highly dispersed oxide nanoprecipitate phases at temperatures above those needed for powder consolidation and shaping of components. This would allow fabrication of net-shape parts using conventional powder-processing methods prior to thermal activation of a reaction producing nanocrystalline Y-(Ti, Zr)-O particles, with a size of 20 ± 7 nm. These results can inform processing of tubes, cladding, sheets, and plates for use in advanced fission and fusion reactors.

In-situ synchrotron X-ray diffraction↗
DOE OSTI2021

Fracture and fatigue of thin crystalline SrTiO 3 membranes

The increasing availability of a variety of two-dimensional materials has generated enormous growth in the field of nanoengineering and nanomechanics. Recent developments in thin film synthesis have enabled the fabrication of freestanding functional oxide membranes that can be readily incorporated in nanomechanical devices. While many oxides are extremely brittle in bulk, recent studies have shown that, in thin membrane form, they can be much more robust to fracture as compared to their bulk counterparts. Here, we investigate the ultimate tensile strength of SrTiO 3 membranes by probing freestanding SrTiO 3 drumheads using an atomic force microscope. We demonstrate that SrTiO 3 membranes can withstand an elastic deformation with an average strain of ~6% in the sub-20 nm thickness regime, which is more than an order of magnitude beyond the bulk limit. Further, we also show that these membranes are highly resilient upon a high cycle fatigue test, surviving up to a billion cycles of force modulation at 85% of their fracture strain, demonstrating their high potential for use in nanomechanical applications.

36 MATERIALS SCIENCE↗