Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Strain and morphology of graphene membranes on responsive microhydrogel patterns

We study the configuration of atomically-thin graphene membranes on tunable microhydrogel patterns. The polyethylene oxide microhydrogel structures patterned by electron-beam lithography show increase in height, with a persistent swelling ratio up to ∼10, upon exposure to vapors of an organic solvent. We demonstrate that modifying the height fluctuations of the microhydrogel affects the strain and morphology of ultrathin graphene membrane over-layer. Raman spectroscopic investigations indicate that small lattice strains can be switched on in mechanically exfoliated few-layer graphene membranes that span these microhydrogel structures. In case of chemical-vapor deposited single-layer graphene, we observe Raman signatures of local depinning of the membranes upon swelling of microhydrogel pillars. We attribute this depinning transition to the competition between membrane-substrate adhesion energy and membrane strain energy, where the latter is tuned by hydrogel swelling.

36 MATERIALS SCIENCE↗

Anisotropic charged impurity-limited carrier mobility in monolayer phosphorene

The room temperature carrier mobility in atomically thin 2D materials is usually far below the intrinsic limit imposed by phonon scattering as a result of scattering by remote charged impurities in its environment. We simulate the charged impurity-limited carrier mobility μ in bare and encapsulated monolayer phosphorene. We find a significant temperature dependence in the carrier mobilities (μ ∝ T{sup −γ}) that results from the temperature variability of the charge screening and varies with the crystal orientation. The anisotropy in the effective mass leads to an anisotropic carrier mobility, with the mobility in the armchair direction about one order of magnitude larger than in the zigzag direction. In particular, this mobility anisotropy is enhanced at low temperatures and high carrier densities. Under encapsulation with a high-κ overlayer, the mobility increases by up to an order of magnitude although its temperature dependence and its anisotropy are reduced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spintronics with graphene-hexagonal boron nitride van der Waals heterostructures

Hexagonal boron nitride (h-BN) is a large bandgap insulating isomorph of graphene, ideal for atomically thin tunnel barrier applications. In this letter, we demonstrate large area chemical vapor deposited (CVD) h-BN as a promising spin tunnel barrier in graphene spin transport devices. In such structures, the ferromagnetic tunnel contacts with h-BN barrier are found to show robust tunneling characteristics over a large scale with resistances in the favorable range for efficient spin injection into graphene. The non-local spin transport and precession experiments reveal spin lifetime ≈500 ps and spin diffusion length ≈1.6 μm in graphene with tunnel spin polarization ≈11% at 100 K. The electrical and spin transport measurements at different injection bias current and gate voltages confirm tunnel spin injection through h-BN barrier. These results open up possibilities for implementation of large area CVD h-BN in spintronic technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrostatic force microscopy and electrical isolation of etched few-layer graphene nano-domains

Nanostructured bi-layer graphene samples formed through catalytic etching are investigated with electrostatic force microscopy. The measurements and supporting computations show a variation in the microscopy signal for different nano-domains that are indicative of changes in capacitive coupling related to their small sizes. Abrupt capacitance variations detected across etch tracks indicates that the nano-domains have strong electrical isolation between them. Comparison of the measurements to a resistor-capacitor model indicates that the resistance between two bi-layer graphene regions separated by an approximately 10 nm wide etch track is greater than about 1×10{sup 12} Ω with a corresponding gap resistivity greater than about 3×10{sup 14} Ω⋅nm. This extremely large gap resistivity suggests that catalytic etch tracks within few-layer graphene samples are sufficient for providing electrical isolation between separate nano-domains that could permit their use in constructing atomically thin nanogap electrodes, interconnects, and nanoribbons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detrimental influence of catalyst seeding on the device properties of CVD-grown 2D layered materials: A case study on MoSe{sub 2}

Seed catalyst such as perylene-3,4,9,10-tetracarboxylic acid tetrapotassium (PTAS) salt has been used for promoting the growth of atomically thin layered materials in chemical vapor deposition (CVD) synthesis. However, the ramifications from the usage of such catalyst are not known comprehensively. Here, we report the influence of PTAS seeding on the transistor device performance from few-layered CVD-grown molybdenum diselenide (MoSe{sub 2}) flakes. While better repeatability and higher yield can be obtained with the use of PTAS seeds in synthesis, we observed that PTAS-seeded flakes contain particle impurities. Moreover, devices from PTAS-seeded MoSe{sub 2} flakes consistently displayed poorer field-effect mobility, current on-off ratio, and subthreshold swing as compared to unseeded flakes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-dimensional semiconductor HfSe{sub 2} and MoSe{sub 2}/HfSe{sub 2} van der Waals heterostructures by molecular beam epitaxy

Using molecular beam epitaxy, atomically thin 2D semiconductor HfSe{sub 2} and MoSe{sub 2}/HfSe{sub 2} van der Waals heterostructures are grown on AlN(0001)/Si(111) substrates. Details of the electronic band structure of HfSe{sub 2} are imaged by in-situ angle resolved photoelectron spectroscopy indicating a high quality epitaxial layer. High-resolution surface tunneling microscopy supported by first principles calculations provides evidence of an ordered Se adlayer, which may be responsible for a reduction of the measured workfunction of HfSe{sub 2} compared to theoretical predictions. The latter reduction minimizes the workfunction difference between the HfSe{sub 2} and MoSe{sub 2} layers resulting in a small valence band offset of only 0.13 eV at the MoSe{sub 2}/HfSe{sub 2} heterointerface and a weak type II band alignment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gate-modulated conductance of few-layer WSe{sub 2} field-effect transistors in the subgap regime: Schottky barrier transistor and subgap impurity states

Two key subjects stand out in the pursuit of semiconductor research: material quality and contact technology. The fledging field of atomically thin transition metal dichalcogenides (TMDCs) faces a number of challenges in both efforts. This work attempts to establish a connection between the two by examining the gate-dependent conductance of few-layer (1-5L) WSe{sub 2} field effect devices. Measurements and modeling of the subgap regime reveal Schottky barrier transistor behavior. We show that transmission through the contact barrier is dominated by thermionic field emission (TFE) at room temperature, despite the lack of intentional doping. The TFE process arises due to a large number of subgap impurity states, the presence of which also leads to high mobility edge carrier densities. The density of states of such impurity states is self-consistently determined to be approximately 1–2 × 10{sup 13}/cm{sup 2}/eV in our devices. We demonstrate that substrate is unlikely to be a major source of the impurity states and suspect that lattice defects within the material itself are primarily responsible. Our experiments provide key information to advance the quality and understanding of TMDC materials and electrical devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transparency of graphene for low-energy electrons measured in a vacuum-triode setup

Graphene, being an atomically thin conducting sheet, is a candidate material for gate electrodes in vacuum electronic devices, as it may be traversed by low-energy electrons. The transparency of graphene to electrons with energies between 2 and 40 eV has been measured by using an optimized vacuum-triode setup. The measured graphene transparency equals ∼60% in most of this energy range. Based on these results, nano-patterned sheets of graphene or of related two-dimensional materials are proposed as gate electrodes for ambipolar vacuum devices.

36 MATERIALS SCIENCE↗

GaAs quantum dot solar cell under concentrated radiation

Effects of concentrated solar radiation on photovoltaic performance are investigated in well-developed GaAs quantum dot (QD) solar cells with 1-Sun efficiencies of 18%–19%. In these devices, the conversion processes are enhanced by nanoscale potential barriers and/or AlGaAs atomically thin barriers around QDs, which prevent photoelectron capture to QDs. Under concentrated radiation, the short circuit current increases proportionally to the concentration and the open circuit voltage shows the logarithmic increase. In the range up to hundred Suns, the contributions of QDs to the photocurrent are proportional to the light concentration. The ideality factors of 1.1–1.3 found from the V{sub OC}-Sun characteristics demonstrate effective suppression of recombination processes in barrier-separated QDs. The conversion efficiency shows the wide maximum in the range of 40–90 Suns and reaches 21.6%. Detailed analysis of I-V-Sun characteristics shows that at low intensities, the series resistance decreases inversely proportional to the concentration and, at ∼40 Suns, reaches the plateau determined mainly by the front contact resistance. Improvement of contact resistance would increase efficiency to above 24% at thousand Suns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gate tunable monolayer MoS{sub 2}/InP heterostructure solar cells

We demonstrate monolayer molybdenum disulfide (MoS{sub 2})/indium phosphide (InP) van der Waals heterostructure with remarkable photovoltaic response. Furthermore, benefiting from the atomically thin and semiconductor nature of MoS{sub 2}, we have designed the gate tunable MoS{sub 2}/InP heterostructure. Applied with a top gate voltage, the Fermi level of MoS{sub 2} is effectively tuned, and the barrier height at the MoS{sub 2}/InP heterojunction correspondingly changes. The power conversion efficiency of MoS{sub 2}/InP solar cells has reached a value of 7.1% under AM 1.5G illumination with a gate voltage of +6 V. The tunable MoS{sub 2}/InP heterostructure may be promising for highly efficient solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphene/CdTe heterostructure solar cell and its enhancement with photo-induced doping

We report a type of solar cell based on graphene/CdTe Schottky heterostructure, which can be improved by surface engineering as graphene is atomic thin. By coating a layer of ultrathin CdSe quantum dots onto graphene/CdTe heterostructure, the power conversion efficiency is increased from 2.08% to 3.10%. Photo-induced doping is mainly accounted for this enhancement, as evidenced by field effect transport, Raman, photoluminescence, and quantum efficiency measurements. This work demonstrates a feasible way of improving the performance of graphene/semiconductor heterostructure solar cells by combining one dimensional with two dimensional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Manipulation of surface plasmon polariton propagation on isotropic and anisotropic two-dimensional materials coupled to boron nitride heterostructures

We present a comprehensive analysis of surface plasmon polariton dispersion characteristics associated with isotropic and anisotropic two-dimensional atomically thin layered materials (2D sheets) coupled to h-BN heterostructures. A scattering matrix based approach is presented to compute the electromagnetic fields and related dispersion characteristics of stacked layered systems composed of anisotropic 2D sheets and uniaxial bulk materials. We analyze specifically the surface plasmon polariton (SPP) dispersion characteristics in case of isolated and coupled two-dimensional layers with isotropic and anisotropic conductivities. An analysis based on residue theorem is utilized to identify optimum optical parameters (surface conductivity) and geometrical parameters (separation between layers) to maximize the SPP field at a given position. The effect of type and degree of anisotropy on the shapes of iso-frequency curves and propagation characteristics is discussed in detail. The analysis presented in this paper gives an insight to identify optimum setup to enhance the SPP field at a given position and in a given direction on the surface of two-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distance-dependent energy transfer between CdSe/CdS quantum dots and a two-dimensional semiconductor

Atomically thin semiconductors, such as the transition metal dichalcogenides, show great potential for nanoscale photodetection, energy harvesting, and nanophotonics. Here, we investigate the efficiency of energy transfer between colloidal quantum dots with a cadmium selenide core and cadmium sulfide shell and monolayer molybdenum diselenide (MoSe{sub 2}). We show that MoSe{sub 2} effectively quenches the fluorescence of quantum dots when the two materials are in contact. We then separate the MoSe{sub 2} and quantum dots by inserting variable thickness hexagonal boron nitride (h-BN) spacers and show that the efficiency at which the MoSe{sub 2} quenches fluorescence decreases as the h-BN thickness is increased. For distances d, this trend can be modeled by a 1/d{sup 4} decay, in agreement with theory and recent studies involving graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monolayer MoS{sub 2} self-switching diodes

This paper presents a new molybdenum disulphide (MoS{sub 2}) nanodevice that acts as a two-terminal field-effect rectifier. The device is an atomically-thin two-dimensional self-switching diode (SSD) that can be realized within a single MoS{sub 2} monolayer with very minimal process steps. Quantum simulation results are presented confirming the device's operation as a diode and showing strong non-linear I-V characteristics. Interestingly, the device shows p-type behavior, in which conduction is dominated by holes as majority charge carriers and the flow of reverse current is enhanced, while the flow of forward current is suppressed, in contrast to monolayer graphene SSDs, which behave as n-type devices. The presence of a large bandgap in monolayer MoS{sub 2} results in strong control over the channel, showing complete channel pinch-off in forward conduction, which was confirmed with transmission pathways plots. The device exhibited large leakage tunnelling current through the insulating trenches, which may have been due to the lack of passivation; nevertheless, reverse current remained to be 6 times higher than forward current, showing strong rectification. The effect of p-type substitutional channel doping of sulphur with phosphorus was investigated and showed that it greatly enhances the performance of the device, increasing the reverse-to-forward current rectification ratio more than an order of magnitude, up to a value of 70.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Leakage and field emission in side-gate graphene field effect transistors

We fabricate planar graphene field-effect transistors with self-aligned side-gate at 100 nm from the 500 nm wide graphene conductive channel, using a single lithographic step. We demonstrate side-gating below 1 V with conductance modulation of 35% and transconductance up to 0.5 mS/mm at 10 mV drain bias. We measure the planar leakage along the SiO{sub 2}/vacuum gate dielectric over a wide voltage range, reporting rapidly growing current above 15 V. We unveil the microscopic mechanisms driving the leakage, as Frenkel-Poole transport through SiO{sub 2} up to the activation of Fowler-Nordheim tunneling in vacuum, which becomes dominant at higher voltages. We report a field-emission current density as high as 1 μA/μm between graphene flakes. These findings are important for the miniaturization of atomically thin devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon nanotube stabilized single layer graphene cantilevers

In this work, we demonstrate a method to fabricate single-layer graphene cantilevers by utilizing multiwalled carbon nanotube (MWNT) stabilizing elements. Cantilevers are produced by focused ion beam milling of suspended graphene with MWNTs on the surface. Stable structures with an aspect ratio of at least 5 can be reliably produced and are found to be considerably stiffer than expected based on the theoretical bending stiffness of a graphene sheet. In conclusion, this process substantially extends the current limits of single-layer graphene cantilever fabrication, facilitating the study of atomically thin membranes and production of previously unrealized nanoelectromechanical systems.

36 MATERIALS SCIENCE↗

Nanoscale graphene/Ge wigglers as building blocks for THz sources

We demonstrate that wrinkled graphene on Ge with nanoscale period and amplitude holds the potential to generate cyclotron-like radiation in the THz range of the electromagnetic spectrum. We show nanoscale graphene wigglers fabricated by release and transfer of atomically thin sheets to one-dimensional Ge gratings. We present a simple time of flight and interference model to calculate the radiated frequency and output power for the fabricated devices. We establish, theoretically, that an output power of ~ 0.1-7 mW can be obtained from graphene/Ge wigglers with period not exceeding 85 nm, and amplitude-to-period ratio in the range of 1.4 to 10.

36 MATERIALS SCIENCE↗

Synthesis and emerging properties of 2D layered III–VI metal chalcogenides

Atomically thin layered III–VI metal chalcogenides are an emerging class of 2D materials that have attracted increasing attention in recent years due to their remarkable physical properties and technological applications. Thanks to the recently developed theoretical and experimental methods, a number of exciting discoveries for these materials have revealed their new phases, a unique “Mexican hat”-shaped electronic band structure, and superior optical and electronic properties that distinguish them from other 2D materials such as transition metal dichalcogenides. This review summarizes the novel properties, structures, and synthesis strategies for these materials and emphasizes the most cutting-edge and seminal achievements in this rapidly growing field in order to provide input for future research works. We first present the rich crystal structure and phases that have been found in these materials, with an emphasis on the possibility of phase engineering. Then, we discuss the synthesis strategies for 2D layered III–VI metal chalcogenides from the top-down, bottom-up, and template-based chemical conversion approaches. We focus on the highly controlled synthesis methods that provide fine-tuning of the thickness, phase, edge structure, and other morphological characteristics. Third, we discuss the properties and applications of these materials, focusing on their unique electronic structure including the Mexican hat-shaped valence band, their superior nonlinear optical properties, high-performance electronic devices, promising photoelectrochemical properties, and emerging quantum properties such as quantum emission, exciton condensation, ferromagnetism, and topological quantum phase transition. To conclude, we provide our perspective on the current challenges and future directions in this field.

36 MATERIALS SCIENCE↗