SEARCH · Search NASA

Results for “canister”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Student's experiment to fly on third Shuttle mission

A spaceborne student experiment on insect motion during weightlessness scheduled to fly on the third flight of the space shuttle is described. The experiment will focus on the flight behavior in zero gravity of two species of flying insects with differing ratios of body mass to wing area, the velvetbean caterpillar moth and the honeybee drone. Ten insects of each species will be carried in separate canisters. The crew will remove the canisters from the storage locker and attach them to the mid-deck wall, where the insects will be observed and filmed by a data acquisition camera.

Source record↗

NASA NTRS1981

Feasibility study of the solar scientific instruments for Spacelab/Orbiter

The feasibility and economics of mounting and operating a set of solar scientific instruments in the backup Skylab Apollo Telescope Mount (ATM) hardware was evaluated. The instruments used as the study test payload and integrated into the ATM were: the Solar EUV Telescope/Spectrometer; the Solar Active Region Observing Telescope; and the Lyman Alpha White Light Coronagraph. The backup ATM hardware consists of a central cruciform structure, called the "SPAR', a "Sun End Canister' and a "Multiple Docking Adapter End Canister'. Basically, the ATM hardware and software provides a structural interface for the instruments; a closely controlled thermal environment; and a very accurate attitude and pointing control capability. The hardware is an identical set to the hardware that flow on Skylab.

Leritz, J.↗

NASA NTRS1983

Results of thermal environment measurements on the thermal cannister experiment and get away special enclosure

Because the OSS-1 pallet contained a variety of instruments with irregular surface geometry and properties which limited predictability, the total absorbed flux on thermal canister radiators was measured to determine heat rejection capability. The instrumentation and sensor cup design and locations for the thermal canister experiment are illustrated. Graphs show flux sensor history in hot and coal orbits. Kapton erosion is also considered. Results show that the flux levels measured in all STS attitudes are higher than predictions. In cold and moderate attitudes, flight results are a factor of two to three higher than predicts. In hot attitude, much better agreement occurred. It is concluded that in cold or moderate attitudes other sources may be contributing to added inputs (albedo, Earth shine, shuttle background). In hot attitude, smaller differences could be attributed to coatings assumptions or calculation uncertainty.

Ollendorf, S.↗

NASA NTRS1983

Analysis of STS-3 Get Away Special (GAS) flight data and vibration specification for gas payloads

During the Space Transportation System (STS)-3 mission, a Get Away Special (GAS) canister was flown. In order to determine the flight environment for GAS payloads, triaxial accelerometers and a microphone were installed inside the GAS canister. Data from these accelerometers and the microphone were analyzed. The microphone data is presented as overall sound pressure level (SPL) and one-third octave band time history plots. And the accelerometer data is provided in the forms of instantaneous time history, RMS time history and power spectral density plots. Also based on this flight data, vibration test specification for GAS payloads was developed and the recommended specification is presented here.

Talapatra, D. C.↗

NASA NTRS1984

Low-temperature heat pipe experiment package (HEPP) for LDEF (S1001)

The principal objectives of the experiment are to determine zero-g start-up performance for conventional and diode low temperature heat pipes, to evaluate heat pipe performance in zero-g for an extended period of time, to determine zero-g transport capability of each heat pipe, and to determine diode operation, including forward conductance, turndown ratio, and transient behavior. Two heat pipes, a fixed conductance transporter heat pipe and a thermal diode heat pipe, are coupled with a radiant cooler system. Both pipes are charged with ethane. Also integrated with the radiator is a phase change material (PCM) canister which provides temperature stability during transport tests. N-heptane, which has a melting/freezing point of 182 K, is used as the PCM. The high heat capacity (28 W-hr of latent heat) provided by the canister permits high power heat pipe testing at constant temperature.

Mcintosh, R., Jr.↗

NASA NTRS1984

Development of solid amine CO2 control systems for extended duration missions

This paper briefly discusses the development history of solid amine CO2 control systems, describes two distinct CO2 control system concepts, and presents the performance characteristics for both system concepts. The first concept (developed under NASA Contract NAS9-13624) incorporates a solid amine canister, an automatic microprocessor controller, and an accumulator to collect CO2 and to provide regulated CO2 delivery to an oxygen recovery system. This system is currently operating in the Crew Systems Division's Advanced Life Support Development Laboratory (ALSDL). The second system concept (being developed under NASA Contract NAS9-16978) employs multiple solid amine canisters, an advanced automatic controller and system status display, the ability to regulate CO2 delivery for oxygen recovery, and energy saving features that allow system operation at lower power levels than the first concept.

Dresser, K. J.↗

NASA NTRS1985

To catch a comet: Technical overview of CAN DO G-324

The primary photographing of aboard STS 61-E. INTRODUCTION objective of the C.E. Williams Middle School Get Away Special "CAN DO" is the Comet Halley. As it is currently scheduled, G-324 will fly in March of 1986 The project will involve middle school students, grades 6 through 8, in the study and interpretation of astronomical photographs and techniques. -The-objectives of these studies are detailed in another paper to be presented at this symposium. 6-324 is contained in a 5 cubic foot G.A.S. Canister with an opening door and pyrex window for photography. It will be pressurized with one atmosphere of dry nitrogen. Three 35mm still cameras with 250 exposure film backs and different focal length lenses will be fired by a combination of automatic timer and an active comet detector. A lightweight 35mm movie camera will shoot single exposures at about 4 minute intervals to give an overlapping "skymap" of the mission. The fifth camera is a solid state television camera specially constructed for detection of the comet by the microprocessor. In addition to the photographic goals of CAN DO, the canister also contains a separate package of middle school student designed passive experiments. These-projects will be described in detail in the accompanying paper on educational goals.

Thomas J. O'Brien↗

NASA NTRS1985

The GLOMR satellite payload G-308

This paper describes the Global Low Orbiting Message Relay (GLOMR) Satellite and its participation in the pioneering development of a Get-Away-Special (GAS) satellite launch capability. The GLOMR is a data relay communication satellite designed and built by Defense Systems, Inc. (DSI), a private company located in the Washington, D.C. area. Experiment objectives are to demonstrate the store-forward relay of data/messages and the communication to ground user equipment. satellite, powered by lead-acid batteries and solar cells, includes processing, control and RF electronics for data message handling and storage. mounted through a Marman clamp ejection/retention pedestal to a five cubic foot GAS canister bottom plate. The GAS canister includes a Full Diameter Motorized Door Assembly (FDMDA) lid which is opened remotely by astronauts for satellite launch.

Source record↗

NASA NTRS1987

Charcoal/Nitrogen Adsorption Cryocooler

Refrigerator with no wear-related moving parts produces 0.5 W of cooling at 118 K. When fully developed, refrigerator needs no electrical power, and life expectancy of more than 10 yr, operates unattended to cool sensitive infrared detectors for long periods. Only moving parts in adsorption cryocooler are check valves. As charcoal is cooled in canister, gas pressure drops, allowing inlet check valve to open and admit more nitrogen. When canister is heated, pressure rises, closing inlet valve and eventually opening outlet valve.

Bard, Steven↗

NASA NTRS1988

Conceptual Spacecraft-Guidance Algorithm

Required weight of spacecraft minimized. Report describes conceptual algorithm for guidance of spacecraft launched from surface of Mars. Spacecraft to carry canister of specimens from surface to another spacecraft in orbit about Mars; second spacecraft then to carry canister back to Earth. Algorithm sufficiently general to be adaptable to prediction/correction algorithms for other spacecraft configurations.

Mccormick, Bernell R.↗

NASA NTRS1989

United States Air Force Academy get-away-special flexible beam experiment

The Department of Astronautics at the United States Air Force Academy is currently planning to fly an experiment in a NASA Get-Away-Special (GAS) canister. The experiment was named the flex beam experiment. The primary technical objective of the flex beam experiment is to measure the damping of a thin beam in the vacuum and zero G environment of space. By measuring the damping in space, it is hoped to determine the amount of damping the beam normally experiences due to the gravitational forces present on Earth. This will allow validation of models which predict the dynamics of thin beams in the space environment. The experiment will also allow the Academy to develop and improve its ability to perform experiments within the confines of a NASA GAS canister. Several experiments, of limited technical difficulty, were flown by the Academy. More complex experiments are currently planned and it is hoped to learn techniques with each space shuttle flight.

Bubb, Keith W.↗

NASA NTRS1990

Integrated support structure

This Major Qualifying Project is part of the Advanced Space Design Program at WPI. The goal is to design a support structure for a NASA GetAway Special experimental canister. The payload integration, weight, volume, and structural integrity of the canister as specified by NASA guidelines were studied. The end result is a complete set of design drawings with interface drawings and data to specify the design and leave a base on which the next group can concentrate.

Bruneau, Stephen D.↗

NASA NTRS1989

Robotic sampling system for an unmanned Mars mission

A major robotics opportunity for NASA will be the Mars Rover/Sample Return Mission which could be launched as early as the 1990s. The exploratory portion of this mission will include two autonomous subsystems: the rover vehicle and a sample handling system. The sample handling system is the key to the process of collecting Martian soils. This system could include a core drill, a general-purpose manipulator, tools, containers, a return canister, certification hardware and a labeling system. Integrated into a functional package, the sample handling system is analogous to a complex robotic workcell. Discussed here are the different components of the system, their interfaces, forseeable problem areas and many options based on the scientific goals of the mission. The various interfaces in the sample handling process (component to component and handling system to rover) will be a major engineering effort. Two critical evaluation criteria that will be imposed on the system are flexibility and reliability. It needs to be flexible enough to adapt to different scenarios and environments and acquire the most desirable specimens for return to Earth. Scientists may decide to change the distribution and ratio of core samples to rock samples in the canister. The long distance and duration of this planetary mission places a reliability burden on the hardware. The communication time delay between Earth and Mars minimizes operator interaction (teleoperation, supervisory modes) with the sample handler. An intelligent system will be required to plan the actions, make sample choices, interpret sensor inputs, and query unknown surroundings. A combination of autonomous functions and supervised movements will be integrated into the sample handling system.

Chun, Wendell↗

NASA NTRS1989

NASA standard GAS Can satellite

The Get-Away Special canister (GAS Can) satellite is a small, (150 lb) low-cost satellite making it possible for commercial and scientific institutions to conduct experiments in space on an economical and short-term basis. The current model is called Xsat (Exceptional Satellite) and is designed to be launched from a GAS canister on the STS Orbiter; also provided is a low-cost automated PC-operated ground station for commercial, scientific, and government users. The Xsat structure is diagrammed, and details such as payload interface, weight restrictions, and structural loads are described in detail, pointing out that Xsat has a maximum payload weight of 50 lbs, and has a natural vibration frequency of around 45 Hz, with a minimum requiremet of 35 Hz. Thermal designs, power system, electronics, computer design and bus system, and satellite operations are all outlined.

Cudmore, Patrick H.↗

NASA NTRS1991

Spacecraft thermal control coatings (AO 138-6)

The experiment A0 138-6 was located on the trailing edge of LDEF as part of the Experiment FRECOPA. Material specimens 2 x 2 cm, independently mounted in sample-holders with their surface in the same reference plane, were exposed to space. Materials include paints (conductive or not), SSMs, polymeric films, surface coatings, composite materials, and metals. The results show that for some materials the degradation was higher for samples in the canister than for those directly mounted on the tray; contamination problems were ruled out, the higher temperature experienced by the samples inside the canister probably explains this phenomenon.

Paillous, Alain↗

NASA NTRS1992

Effect of space environment on composite materials and thermal coatings (A0138-9)

This paper presents an experiment within the FRECOPA project on composite materials, adhesives, and thermal coatings. The aging of the specimens was limited because of the canister closing, the location on the trailing edge and the arrangement of the specimens inside the canister. The results show no evidence of change for several graphite fiber reinforced epoxy matrix composite materials as well as for two adhesives. Minor changes can be found on some second surface mirrors.

Parcelier, Michel↗

NASA NTRS1992

An advanced manned launch system concept

A two-stage fully reusable rocked powered concept is defined and analyzed in detail for the Advanced Manned Launch System missions. The concept elements include a Mach 3 staging unmanned glideback booster and a 149-ft long winged orbiter with an external payload canister with a 15-ft diameter and 30-ft long payload bay. The booster and orbiter main propulsion system is a lightweight derivative of the current Space Shuttle Main Engine. The primary mission is the Space Station Freedom logistics mission, 40,000-lb payload with two crew members and eight passengers. The structural design and material selection, the thermal protection system, the integral cryogenic tanks and insulation, the propulsion system, and the modular payload canister system are described. The ground and flight operations approach analysis, the manufacturing and certification plan, and the technology development requirements are also discussed.

Stone, H. W.↗

NASA NTRS1992

Long Duration Exposure Facility M0003-5 thermal control coatings on DoD flight experiment

The M0003-5 thermal control coatings and materials orbited on the LDEF M0003 Space Environment Effects on Spacecraft Materials were a part of a Wright Laboratories Materials Directorate larger experiment. They were selected from new materials which emerged from development programs during the 1978-1982 time frame. Included were materials described in the technical literature which were being considered or had been applied to satellites. Materials that had been exposed on previous satellite materials experiments were also included to provide data correlation with earlier space flight experiments. The objective was to determine the effect of the LDEF environment on the physical and optical properties of thermal control coatings and materials. One hundred and two specimens of various pigmented organic and inorganic coatings, metallized polymer thin films, optical solar reflectors, and mirrors were orbited on LDEF. The materials were exposed in four separate locations on the vehicle. The first set was exposed on the direct leading edge of the satellite. The second set was exposed on the direct trailing edge of the vehicle. The third and fourth sets were exposed in environmental exposure control canisters (EECC) located 30 degrees off normal to the leading and trailing edges. The purpose of the experiment was to understand the changes in the properties of materials before and after exposure to the space environment and to compare the changes with predictions based on laboratory experiments. The basic approach was to measure the optical and physical properties of materials before and after long-term exposure to a low earth orbital environment comprised of UV, VUV, electrons, protons, atomic oxygen, thermal cycling, vacuum, debris, and micrometeoroids. Due to the unanticipated extended orbital flight of LDEF, the thermal control coatings and materials in the direct leading and trailing edge were exposed for a full five years and ten months to the space environment and the canister materials were exposed for approximately one year to the full environment.

Hurley, Charles J.↗