Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries

In this work, a unique artificial interface combing characteristics of both high ionic and electronic conductivities has been successfully constructed at the surface of Ni-rich LiNi 0·8 Co 0·1 Mn 0·1 O 2 (NCM811). The ionic conductor layer is fabricated through reacting H 3 PO 4 with the lithium residuals on the surface of NCM811 to form Li 3 PO 4 . The interface with high electronic conductivity is constructed by attaching graphene fragments to the NCM811 spherical particles. Due to the synergistic effect of the Li3PO4 coating layer and the graphene network, the modified sample (GN-LPO-NCM811) exhibits high capacity retention of 94.3% after 150 cycles at 0.5C between 3.0 and 4.3 V, while the pristine material shows a much lower retention of only 88.1%. In addition, the GN-LPO-NCM811 also presents improved cycling stability at elevated temperature of 55 °C. Even at an extremely high rate of 10C, the GN-LPO-NCM811 still remains 70% of its original capacity, while the pristine NCM811 only delivers 50% of the capacity. The stable cycling performance of GN-LPO-NCM811 is demonstrated in a full cell with graphite anode at ambient temperatures. Importantly, the thermal stability of the modified samples is also greatly enhanced. This study provides an effective method to improve the electrochemical performance of LiNi 0·8 Co 0·1 Mn 0·1 O 2 .

25 ENERGY STORAGE↗

Performance investigation of alkaline direct methanol fuel cell with commercial PGM-free cathodic materials

Because little progress has been made in investigating the performance of alkaline direct methanol fuel cells (ADMFCs) with commercial materials (including platinum group metal (PGM)-free catalysts, anion exchange ionomers (AEIs), and anion exchange membranes (AEMs)), the objective of this work is to evaluate the performance of ADMFCs with all commercial materials, in order to establish a reference against which the performance of newly developed materials can be compared. Fe-N-C catalysts, Fumasep (FAA-3-50) based AEMs, and FAA3 based AEIs are here employed, and the parameters such as of operating temperature and methanol concentration are investigated and optimized. Electrochemical measurements show a performance increase with the temperature from 40 to 60 °C, and with the methanol concentration (from 1 to 5 M); followed by insignificant decrease with the further increase to 10 M. The best performance is achieved with 5 M methanol at 60 °C, and the remarkable powder density of 48.2 mW cm -2 was demonstrated under these conditions. This work provides insight into the large-scale application of ADMFC with commercial PGM-free materials.

25 ENERGY STORAGE↗

Characterization of ultrafast-laser ablation of micro-structures in Li-ion battery anode and cathode materials: Morphology, rate, and efficiency

Characterization of the rate and quality of ultrafast-laser ablation of Li-ion battery (LIB) electrode materials is presented for a collection of common and next-generation electrodes. Laser ablated micro-structures on the surface of LIB electrodes have been shown to provide dramatic enhancement of high-rate capability and electrode wetting. However, industrial adoption is hampered by a lack of data enabling informed choice of laser parameters and predicting process throughput. Here this work bridges this gap by providing characterization of the ablation process at more laser parameters (laser fluence and number of pulses used) than are currently available in the literature. Further, we expand on previous graphite and lithium iron phosphate (LFP) ablation work by extending ablation characterization to new LIB materials, providing high data resolution and adopting new characterization metrics which are relevant for industrial application of this technology. Ablated pores are characterized by their ablated depth, volume, and how the depth and volume ablation rate changes as a function of pore depth. Finally, we provide a detailed characterization of the morphology of laser ablated micro-structures which informs how material and laser parameters affect the quality of laser-processed electrodes.

25 ENERGY STORAGE↗

Synthesis and electrochemical performance of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (0 {<=} x {<=} 0.15) cathode materials for lithium-ion batteries

Graphical abstract: Cycle behavior of Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} cells (x = 0, 0.05, 0.10 and 0.15) obtained during cycling within the potential of 2.5-4.3 V. Highlights: Black-Right-Pointing-Pointer The spherical Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} were synthesized by coprecipitation method. Black-Right-Pointing-Pointer Excess lithium improved the electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} showed the best electrochemical performance. Black-Right-Pointing-Pointer Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} had the lowest charge transfer resistance. -- Abstract: In this work, layered lithium-excess materials Li{sub 1+x}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} (x = 0, 0.05, 0.10 and 0.15), of spherical morphology with primary nanoparticles assembled in secondary microspheres, were synthesized by a coprecipitation method. The effects of lithium content on the structure and electrochemical performance of these materials were evaluated by employing X-ray diffraction (XRD), inductive coupled plasma (ICP), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge tests. It is found that Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}}, i.e., Li[(Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}){sub 0.95}Li{sub 0.05}]O{sub 2} showed the best electrochemical performance due to the highly ordered layered structure, reduced cation mixing and the lowest charge transfer resistance. Li{sub 1.10}Ni{sub 0.5}Mn{sub 0.3}Co{sub 0.2}O{sub 2+{delta}} delivered a discharge capacity of 145 mA h g{sup -1} at 125 mA g{sup -1} in the cut-off voltage of 2.5-4.3 V, and had a capacity retention of 100% after 50 cycles at room temperature.

36 MATERIALS SCIENCE↗

Thermodynamic data of Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} SOFC cathode material

Graphical abstract: Partial molar energy of oxygen dissolution (ΔG{sup −}{sub O{sub 2}}) and equilibrium partial pressure of oxygen (log⁡p{sub O{sub 2}}) of perovskite material with the composition Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} as a function of temperature. - Highlights: • We report relevant data for thermodynamic stability of Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} perovskite compound. • Temperature of structural transformations related to the charge compensation of the material system is evidenced. • The results are discussed based on the properties-defect structure relationship. - Abstract: The compound Ba{sub 0.6}Sr{sub 0.4}Co{sub 0.8}Fe{sub 0.2}O{sub 3−δ} with perovskite structure has been studied focusing mainly on the thermodynamic stability in correlation to the change in the oxygen stoichiometry. The thermochemical behavior has been investigated from room temperature to 1300 K by thermal gravimetry and differential thermal analysis in air and by calorimetry in scanning mode in Argon. The temperature dependence of enthalpy (ΔH{sup T}{sub 298}) in the temperature range of 300–900 K was measured by drop calorimetry. Thermodynamic properties represented by the relative partial molar free energies, enthalpies and entropies of oxygen dissolution in the perovskite phase, as well as the equilibrium partial pressures of oxygen have been obtained in the temperature range of 823–1273 K using solid electrolyte electrochemical cells (EMF). The influence of the oxygen stoichiometry on the thermodynamic properties was examined using a coulometric titration technique coupled with EMF measurements. The results are discussed based on the strong correlation between the energetic parameters and the charge compensation of the material system.

36 MATERIALS SCIENCE↗

Structure and electrochemistry of NaFePO{sub 4} and Na{sub 2}FePO{sub 4}F cathode materials prepared via mechanochemical route

Highlights: • Na{sub 2}FePO{sub 4}F is prepared by mechanochemically assisted solid state synthesis. • The crystal and local structure are studied by XRPD, FTIR, Mössbauer, and NMR. • Na{sup +}/Li{sup +} ion exchange is completed with the formation of NaLiFePO{sub 4}F. • The average D{sub Li} (10{sup −15} cm{sup 2} s{sup −1}) is determined from GITT measurements. - Abstract: Nanostructured NaFePO{sub 4} (space group Pmnb) and Na{sub 2}FePO{sub 4}F (space group Pbcn) were prepared by a quick and facile mechanochemically assisted solid state synthesis. Low-crystalline Na{sub 2}FePO{sub 4}F was formed as a result of direct mechanochemical reaction of NaFePO{sub 4} with NaF. It crystallizes upon subsequent heating to 600 °C and decomposes at higher temperatures. Crystal and local structure were analyzed by XRD using Rietveld refinement, FTIR, Mössbauer, and NMR spectroscopy. Electrochemical properties were studied by galvanostatic cycling in lithium cells and GITT. Although NaFePO{sub 4} showed some electrochemical activity, neither electrochemical nor chemical Na{sup +}/Li{sup +} exchange was observed by XRD. On contrary, electrochemical and chemical Na{sup +}/Li{sup +} ion exchange occurred in the case of Na{sub 2}FePO{sub 4}F and accomplished with the NaLiFePO{sub 4}F formation. Li{sup +} diffusion coefficient in NaLiFePO{sub 4}F at different delithiated/lithiated states was determined from GITT. Carbon-coated Na{sub 2}FePO{sub 4}F shows discharge capacity of 116 mA h g{sup −1} at 0.1 C rate within the 2.0–4.2 V voltage range and a good cyclability.

36 MATERIALS SCIENCE↗

Layered Li{sub 1+x}(Ni{sub 0.33}Co{sub 0.33}Mn{sub 0.33})O{sub 2} cathode material prepared by microwave assisted solvothermal method for lithium ion batteries

Highlights: • Microwave assisted solvothermal method. • Effect of (0.05–0.2) mol% of excess lithium in layered Li{sub 1+x}(Ni{sub 0.33}Co{sub 0.33}Mn{sub 0.33})O{sub 2}. • Different calcination temperature. • Voltage-cut off optimization. • Conductivity and electrochemical performance correlation. - Abstract: Layered hexagonal structure Li{sub 1+x}(Ni{sub 0.33}Co{sub 0.33}Mn{sub 0.33})O{sub 2} (LNCM) (x = 0, 0.05, 0.1, 0.15 and 0.2 mol%) compounds were prepared by microwave assisted solvothermal method at two different calcination temperature of 850 and 950 °C. The phase purity of the LNCM compounds was confirmed by Rietveld refined XRD pattern, Raman, and HRTEM studies. The average particle sizes were in the submicron range as confirmed by SEM and TEM analysis. Galvanostatic cycling studies were made in various voltage range, 2.5 to 4.4/4.6/4.8 V at a current rate of 0.2 C. Among all the compounds, LNCM prepared at 950 °C (HS3) exhibited an initial discharge capacity of 197 mAh/g and maintained a capacity of 180 mAh/g at the end of 40{sup th} cycle in 2.5–4.6 V window, indicating an excellent capacity retention. HS3 shows the electrical conductivity of 9.31 × 10{sup −6} S/cm, which was higher than all the other compounds and discussed the reason for the improved electrochemical performance.

36 MATERIALS SCIENCE↗