Search NASA⌕ Search

SEARCH · Search NASA

Results for “cleaning methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A Review of International Space Station Habitable Element Equipment Offgassing Characteristics

Crewed spacecraft trace contaminant control employs both passive and active methods to achieve acceptable cabin atmospheric quality. Passive methods include carefully selecting materials of construction, employing clean manufacturing practices, and minimizing systems and payload operational impacts to the cabin environment. Materials selection and manufacturing processes constitute the first level of equipment offgassing control. An element-level equipment offgassing test provides preflight verification that passive controls have been successful. Offgassing test results from multiple International Space Station (ISS) habitable elements and cargo vehicles are summarized and implications for active contamination control equipment design are discussed

Perry, Jay L.↗

First measurement of ADS parameters using $B^- \to D^0K^-$ decays in hadron collisions

Measurements of branching fractions and CP-asymmetries of B{sup -} {yields} D{sup 0}K{sup -} modes allow a theoretically-clean extraction of the CKM angle {gamma}. The method proposed by Atwood, Dunietz and Soni (ADS) makes use of a decay chain where color and Cabibbo suppression interfere, which produces large CP-violating asymmetries. The CDF experiment reports the first measurement at a hadron collider of branching fractions and CP-asymmetries of suppressed B{sup -} {yields} D{sup 0}h{sup -} signals, where h is {pi} or K. Using 5.0 fb{sup -1} of data we found a combined significance exceeding 5{sigma} and we determined the ADS parameters with accuracy comparable with B-factories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

R&D for the Post-EP Processes of Superconducting RF Cavity

The Electro-Polishing (EP) process is the best candidate of final surface treatment for the production of ILC cavities. Nevertheless, the broad distribution of the gradient caused by field emitters in cavities is sitll a serious problem for the EP process. A candidate source of field emitter is the sulfur component which is produced in the EP process and remains the inner-surface of cavities. We studied the effect of Ethanole- and degreaser-rinse processes after the EP process by a unique method. Moreover, we tried to test the sponge cleaning as the post-EP process to remove the field emitter inside the cavcity. This article describe the results of series tests of the post-EP process at KEK.

36 MATERIALS SCIENCE↗

Non-Invasive pipeline unplugging technology for Hanford high-level waste asynchronous pulsing system - 15706

With the plugging of pipelines obstructing the transfer of high-level waste (HLW) from single shell tanks (SSTs) to double shell tanks (DSTs), effective unplugging technology is prudent. Commercial techniques utilize invasive methods that lead to contamination and subsequent clean-up. FIU's Applied Research Center has developed a non-invasive unplugging technology that can prove advantageous in the transfer of high-level waste, the Asynchronous Pulsing System (APS). This is based on the principle of utilizing asynchronous pressure waves on either end of the plug in order to clear the pipeline blockage. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Loss Informed Dispatcher for Battery Systems (LIDBS)

LIDBS takes battery-system operational data as an input. It then cleans the data using density-based clustering methods, forms an initial loss model, and then embeds the loss model into the optimization formulation. LIDBS provides a much more informed dispatch strategy over state-of-the-art approaches.

Latif, Aadil↗

Electrochemical device for syngas and liquid fuels production

The invention relates to methods for creating high value liquid fuels such as gasoline, diesel, jet and alcohols using carbon dioxide and water as the starting raw materials and a system for using the same. These methods combine a novel solid oxide electrolytic cell (SOEC) for the efficient and clean conversion of carbon dioxide and water to hydrogen and carbon monoxide, uniquely integrated with a gas-to-liquid fuels producing method.

02 PETROLEUM↗

Target Visualization at the National Ignition Facility

As the National Ignition Facility continues its campaign to achieve ignition, new methods and tools will be required to measure the quality of the targets used to achieve this goal. Techniques have been developed to measure target surface features using a phase-shifting diffraction interferometer and Leica Microsystems confocal microscope. Using these techniques we are able to produce a detailed view of the shell surface, which in turn allows us to refine target manufacturing and cleaning processes. However, the volume of data produced limits the methods by which this data can be effectively viewed by a user. This paper introduces an image-based visualization system for data exploration of target shells at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory. It aims to combine multiple image sets into a single visualization to provide a method of navigating the data in ways that are not possible with existing tools.

42 ENGINEERING↗

In-Situ Chemical Precipitation of Radioactive Liquid Waste - 12492

This paper presented in-situ chemical precipitation for radioactive liquid waste by using chemical agents. Results are reported on large-scale implementation on the removal of {sup 137}Cs, {sup 134}Cs and {sup 60}Co from liquid radioactive waste generating from Nuclear Research and Training Centre. Total amount of liquid radioactive waste was 35 m{sup 3} and main radionuclides were Cs-137, Cs- 134 and Co-60. Initial radioactivity concentration of the liquid waste was 2264, 17 and 9 Bq/liter for Cs-137, Cs-134 and Co-60 respectively. Potassium ferro cyanide was selected as chemical agent at high pH levels 8-10 according to laboratory tests. After the process, radioactive sludge precipitated at the bottom of the tank and decontaminated clean liquid was evaluated depending on discharge limits. By this precipitation method decontamination factors were determined as 60, 9 and 17 for Cs-137, Cs-134 and Co-60 respectively. At the bottom of the tank radioactive sludge amount was 0.98 m{sup 3}. It was transferred by sludge pumps to cementation unit for solidification. By in situ chemical processing 97% of volume reduction was achieved. Using the optimal concentration of 0.75 M potassium ferro cyanide about 98% of the {sup 137}Cs can be removed at pH 8. The Potassium ferro cyanide precipitation method could be used successfully in large scale applications with nickel and ferrum agents for removal of Cs-137, Cs-134 and Co- 60. Although DF values of laboratory test were much higher than in-situ implementation, liquid radioactive waste was decontaminated successfully by using potassium ferro cyanide. Majority of liquid waste were discharged as clean liquid. %97.2 volumetric amount of liquid waste was cleaned and discharged at the original site. Reduced amount of sludge transportation in drums is more economical and safer method than liquid transportation. Although DF values could be different for each of applications related to main specifications of original liquid waste, this study shows that in-situ treatment of liquid waste by using potassium ferro cyanide is not only a cost effective method but also reduce radiological risks as well. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cosmogenic 3 He exposure dating in mafic rocks by “Virtual mineral separation” of pyroxene

We describe a “virtual mineral separation” method for measuring the cosmogenic 3 He concentration in pyroxene in mafic rocks that consist mainly of plagioclase and pyroxene, without physically separating the minerals. This approach is significantly faster and more cost-effective than the conventional method, which requires physical separation and purification of pyroxene grains by time-consuming and labor-intensive crushing, acid cleaning, magnetic separation, HF etching, and handpicking under a microscope. The premise of the method is that helium diffusivity is much higher in plagioclase than in pyroxene, so controlled preheating of a mixed whole-rock sample can degas 3 He from plagioclase while retaining all 3 He in pyroxene. A second heating step releases all 3 He from pyroxene for measurement. To then obtain a 3 He concentration in pyroxene rather than the whole rock, we determine the pyroxene weight fraction in the sample using X-ray computed tomography (CT). A comparison of 3 He concentrations in pyroxene measured using virtual mineral separation with those measured in the same samples by physical mineral separation in previous work shows no evidence of systematic bias between the methods. Virtual mineral separation greatly simplifies the workflow for 3 He exposure-dating of mafic rocks, reduces time, effort, and cost, and permits measurements on very small samples. This enables new emerging applications of exposure dating, such as quantifying stochastic surface processes, ecosystem studies, and potential subglacial bedrock exposure dating.

Geosciences↗

Electron-stimulated desorption study of hydrogen-exposed aluminum films

H2 adsorption of evaporated clean and H2-exposed aluminum films is investigated by using the electron-stimulated desorption (ESD) method. A strong H(+)ESD signal is observed on a freshly evaporated aluminum surface which is clean according to previously proposed cleanlines criteria. An increased H(+) yield on H2 exposure is also observed. However, the increasing rate of H(+) emission could be directly correlated with small increases in H2O partial pressure during H2 exposure. It is proposed that the oxidation of aluminum by water vapor and subsequent adsorption of H2 or water is the primary process of the enhanced high H(+) yield during H2 exposure.

Park, CH.↗

Scaling Up Energy Efficiency Investment in Emerging Markets - Private Sector Perspectives

Since 2000, electricity demand has flattened and decoupled from Gross Domestic Product (GDP) growth in the Organization for Economic Cooperation and Development (OECD) countries. This trend is anticipated to continue for the next several decades and is largely attributed to the implementation of energy efficiency measures. However, non-OECD countries (emerging markets) have experienced, and are projected to continue experiencing, increasing electricity demands. If the world is to meet the requirements of the Paris Agreement, annual investments in clean energy and energy efficiency need to increase by a factor of six by 2050, compared to 2015. Information presented in this paper is based on qualitative and quantitative data collection and analysis methods to provide an empirical understanding of barriers to private sector clean energy investment including microgrid development, energy efficiency, smart grid development, and utility-scale wind and solar in emerging markets. Through literature review, a survey, and a series of webinar dialogues, USAID and the U.S. Department of Energy National Renewable Energy Laboratory (NREL) solicited input from private sector actors, including developers, project financiers, manufacturers and technical assistance service providers, on the challenges they face to market entry in emerging markets, and their suggestions for improving market competitiveness.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

LA100 Equity Strategies. Chapter 4: Lessons Learned and Options for Community Engagement in Los Angeles

The LA100 Equity Strategies project synthesizes community guidance with robust research, modeling, and analysis to identify strategy options that can increase equitable outcomes in Los Angeles' clean energy transition. Grounded in the analysis of past and ongoing energy inequities and engagement with underserved communities, the project presents community-guided strategies that aim to operationalize recognition and procedural justice. Building on the community-identified problems and solutions, and the analysis of the 11 strategies described in Chapter 3, this chapter continues to focus on the solution space through the lens of recognition and procedural justice. It centers the role of community engagement in energy utility planning and project development with a specific focus on how the Los Angeles Department of Water and Power (LADWP) can engage and work equitably with Los Angeles communities to cocreate a clean and just energy future for LA. LA100 Equity Strategies is rooted in the crucial role community engagement plays in restructuring the energy systems of cities, states, and nations. Scholarship on wind, solar, and other transitional energy technologies and projects has documented that such engagement is commonly used as a top-down mechanism for adapting social practices to fit new technological innovations. Yet, understanding how the clean energy transition - with related changes in technologies, infrastructures, practices, and costs - will fit equitably into the existing socio-political context is a challenge that requires substantive collaboration with local communities. Any form of community engagement opens up government officials and utilities to opposition from their public. Meaningful engagement methods turn such dissent into a strength, embracing critical feedback - particularly from communities historically excluded from decision-making - as contributing to more grounded design and effective implementation. Leveraging this collaborative model to further rectify past and ongoing inequities in the social, cultural, and institutional scaffolding of LA, this chapter presents options and methods to support LADWP in launching a just and equitable clean energy transition. We approach community engagement as a critical process linking recognition, procedural, and distributional justice, outlining how LADWP could learn from past engagement, coordinate such knowledge organization-wide, and use engagement as a key tool for achieving energy justice and equity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

LA100 Equity Strategies. Chapter 5: Low-Income Energy Bill Equity and Affordability

The LA100 Equity Strategies project synthesizes community guidance with robust research, modeling, and analysis to identify strategy options that can increase equitable outcomes in Los Angeles' clean energy transition. Grounded in the analysis of past and ongoing energy inequities and engagement with underserved communities, the project presents community-guided strategies that aim to operationalize recognition and procedural justice. Building on the community-identified problems and solutions, and the analysis of the 11 strategies described in Chapter 3, this chapter continues to focus on the solution space through the lens of recognition and procedural justice. It centers the role of community engagement in energy utility planning and project development with a specific focus on how the Los Angeles Department of Water and Power (LADWP) can engage and work equitably with Los Angeles communities to cocreate a clean and just energy future for LA. LA100 Equity Strategies is rooted in the crucial role community engagement plays in restructuring the energy systems of cities, states, and nations. Scholarship on wind, solar, and other transitional energy technologies and projects has documented that such engagement is commonly used as a top-down mechanism for adapting social practices to fit new technological innovations. Yet, understanding how the clean energy transition - with related changes in technologies, infrastructures, practices, and costs - will fit equitably into the existing socio-political context is a challenge that requires substantive collaboration with local communities. Any form of community engagement opens up government officials and utilities to opposition from their public. Meaningful engagement methods turn such dissent into a strength, embracing critical feedback - particularly from communities historically excluded from decision-making - as contributing to more grounded design and effective implementation. Leveraging this collaborative model to further rectify past and ongoing inequities in the social, cultural, and institutional scaffolding of LA, this chapter presents options and methods to support LADWP in launching a just and equitable clean energy transition. We approach community engagement as a critical process linking recognition, procedural, and distributional justice, outlining how LADWP could learn from past engagement, coordinate such knowledge organization-wide, and use engagement as a key tool for achieving energy justice and equity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Non-Cut Cell Immersed Boundary Method for Use in Icing Simulations

This paper describes a computational fluid dynamic method used for modelling changes in aircraft geometry due to icing. While an aircraft undergoes icing, the accumulated ice results in a geometric alteration of the aerodynamic surfaces. In computational simulations for icing, it is necessary that the corresponding geometric change is taken into consideration. The method used, herein, for the representation of the geometric change due to icing is a non-cut cell Immersed Boundary Method (IBM). Computational cells that are in a body fitted grid of a clean aerodynamic geometry that are inside a predicted ice formation are identified. An IBM is then used to change these cells from being active computational cells to having properties of viscous solid bodies. This method has been implemented in the NASA developed node centered, finite volume computational fluid dynamics code, FUN3D. The presented capability is tested for two-dimensional airfoils including a clean airfoil, an iced airfoil, and an airfoil in harmonic pitching motion about its quarter chord. For these simulations velocity contours, pressure distributions, coefficients of lift, coefficients of drag, and coefficients of pitching moment about the airfoil's quarter chord are computed and used for comparison against experimental results, a higher order panel method code with viscous effects, XFOIL, and the results from FUN3D's original solution process. The results of the IBM simulations show that the accuracy of the IBM compares satisfactorily with the experimental results, XFOIL results, and the results from FUN3D's original solution process.

Sarofeen, Christian M.↗

Investigation of conductive thermal control coatings by a contactless method in vacuo

A technique for determining the conductance per unit area of thermal control coatings for electrostatically clean spacecraft is described. In order to simulate orbital conditions more closely, current-density-voltage (j-V) curves are obtained by a contactless method in which the paint on an aluminum substrate is the anode of a vacuum diode configuration with a tungsten filament cathode. Conductances per unit area which satisfy the International Sun Earth Explorer (ISEE) requirement were observed on black paints containing carbon and in white and green paints filled with zinc oxide which were fired in order to induce defect conductivity. Because of surface effects and the nonhomogeneous nature of paints, large discrepancies were found between measurements with the contactless method and measurements employing metallic contacts, particularly at low current densities. Therefore, measurements with metallic contacts are considered to be of questionable value in deciding the suitability of coatings for electrostatic charge control.

Viehmann, W.↗

Method of separating and de-watering fine particles

A process for cleaning and dewatering hydrophobic particulate materials is presented. The process is performed in two steps: 1) agglomeration of the hydrophobic particles in a first hydrophobic liquid/aqueous mixture; followed by 2) dispersion of the agglomerates in a second hydrophobic liquid to release the water trapped within the agglomerates along with the entrained hydrophilic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method of separating and de-watering fine particles

A process for cleaning and dewatering hydrophobic particulate materials is presented. The process is performed in in two steps: 1) agglomeration of the hydrophobic particles in a first hydrophobic liquid/aqueous mixture; followed by 2) dispersion of the agglomerates in a second hydrophobic liquid to release the water trapped within the agglomerates along with the entrained hydrophilic particles.

01 COAL, LIGNITE, AND PEAT↗