SEARCH · Search NASA

Results for “code sharing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Concurrent processing adaptation of aeroplastic analysis of propfans

Discussed here is a study involving the adaptation of an advanced aeroelastic analysis program to run concurrently on a shared memory multiple processor computer. The program uses a three-dimensional compressible unsteady aerodynamic model and blade normal modes to calculate aeroelastic stability and response of propfan blades. The identification of the computational parallelism within the sequential code and the scheduling of the concurrent subtasks to minimize processor idle time are discussed. Processor idle time in the calculation of the unsteady aerodynamic coefficients was reduced by the simple strategy of appropriately ordering the computations. Speedup and efficiency results are presented for the calculation of the matched flutter point of an experimental propfan model. The results show that efficiencies above 70 percent can be obtained using the present implementation with 7 processors. The parallel computational strategy described here is also applicable to other aeroelastic analysis procedures based on panel methods.

Janetzke, David C.↗

NASA NTRS1990

Concurrent processing adaptation of aeroelastic analysis of propfans

This paper reports on a study involving the adaptation of an advanced aeroelastic analysis program to run concurrently on a shared memory multiple processor computer. The program uses a three-dimensional compressible unsteady aerodynamic model and blade normal modes to calculate aeroelastic stability and response of propfan blades. The identification of the computational parallelism within the sequential code and the scheduling of the concurrent subtasks to minimize processor idle time are discussed. Processor idle time in the calculation of the unsteady aerodynamic coefficients was reduced by the simple strategy of appropriately ordering the computations. Speedup and efficiency results are presented for the calculation of the matched flutter point of an experimental propfan model. The results show that efficiencies above 70 percent can be obtained using the present implementation with 7 processors. The parallel computational strategy described here is also applicable to other aeroelastic analysis procedures based on parallel methods.

Murthy, Durbha V.↗

NASA NTRS1992

Concurrent processing adaptation of aeroelastic analysis of propfans

Murthy, D. V.↗

NASA NTRS2007

General Mission Analysis Tool (GMAT): Mission, Vision, and Business Case

The Goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities businesses and other government organizations; and to share that technology in an open and unhindered way. GMAT's a free and open source software system; free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or future technology development.

Hughes, Steven P.↗

NASA NTRSDate not supplied

Joint ESA-NASA Multi-Mission Algorithm and Analysis Platform (MAAP)

The scientific community is faced with a need for greatly improved data sharing, analysis, visualization and advanced collaboration based firmly on open science principles. Recent and upcoming launches of new satellite missions with more complex and voluminous data, as well as the ever more urgent need to better understand the global carbon budget and related ecological processes, provided the immediate rational for the ESA-NASA Multi-mission Algorithm and Analysis Platform (MAAP). This highly collaborative joint project of ESA and NASA established a framework between ESA and NASA to share data, science algorithms and compute resources in order to foster and accelerate scientific research conducted by ESA and NASA EO data users. Presented to the public in October 2021, the current version of MAAP provides a common cloud-based platform with computing capabilities co-located with the data, a collaborative coding and analysis environment, and a set of interoperable tools and algorithms developed to support the estimation and visualization of global above-ground biomass. Data from the Global Ecosystem Dynamics Investigation (GEDI) mission on the International Space Station and the Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) have been instrumental in the first products of MAAP including the first comprehensive map of Boreal above-ground Biomass and a current Global Biomass Harmonization Activity, but the platform is also being specifically designed to support the forthcoming ESA Biomass mission and incorporate data from the upcoming NASA-ISRO SAR (NISAR) mission. While these missions and the corresponding research which includes airborne, field, and calibration/validation data collection and analyses, provide a wealth of data and information relating to global biomass estimation, they also present data storing, processing and sharing challenges. The NISAR mission alone will produce about 80TB/day. These large data volumes present a challenge that would otherwise place accessibility limits on the scientific community and impact scientific progress. Other challenges being addressed by MAAP include: 1) Enabling researchers to easily discover, process, visualize and analyze large volumes of data from both agencies; 2) Providing a wide variety of data in the same coordinate reference frame to enable comparison, analysis, data evaluation, and data generation; 3) Providing a version-controlled science algorithm development environment that supports tools, co-located data and processing resources; and 4) Addressing intellectual property and sharing challenges related to collaborative algorithm development and sharing of data and algorithms. MAAP products can be explored on the MAAP Dashboard at https://earthdata.nasa.gov/maap-biomass or the joint platform entrance at scimaap.net. MAAP also can be accessed through individual NASA (https://maap-project.org) and ESA (https://esa-maap.org/) landing pages.

cloud computing↗

NASA NTRS1999

Use of the MATRIXx Integrated Toolkit on the Microwave Anisotropy Probe Attitude Control System

Recent advances in analytical software tools allow the analysis, simulation, flight code, and documentation of an algorithm to be generated from a single source, all within one integrated analytical design package. NASA's Microwave Anisotropy Probe project has used one such package, Integrated Systems' MATRIXx suite, in the design of the spacecraft's Attitude Control System. The project's experience with the linear analysis, simulation, code generation, and documentation tools will be presented and compared with more traditional development tools. In particular, the quality of the flight software generated will be examined in detail. Finally, lessons learned on each of the tools will be shared.

Ward, David K.↗

NASA NTRS1997

Ring Buffered Network Bus

This report describes the research effort to demonstrate the integration of a data sharing technology, Ring Buffered Network Bus, in development by Dryden Flight Research Center, with an engine simulation application, the Java Gas Turbine Simulator, in development at the University of Toledo under a grant from the Glenn Research Center. The objective of this task was to examine the application of the RBNB technologies as a key component in the data sharing, health monitoring and system wide modeling elements of the NASA Aviation Safety Program (AVSP) [Golding, 1997]. System-wide monitoring and modeling of aircraft and air safety systems will require access to all data sources which are relative factors when monitoring or modeling the national airspace such as radar, weather, aircraft performance, engine performance, schedule and planning, airport configuration, flight operations, etc. The data sharing portion of the overall AVSP program is responsible for providing the hardware and software architecture to access and distribute data, including real-time flight operations data, among all of the AVSP elements. The integration of an engine code capable of numerically "flying" through recorded flight paths and weather data using a software tool that allows for distributed access of data to this engine code demonstrates initial steps toward building a system capable of monitoring and modeling the National Airspace.

Source record↗

NASA NTRS2005

Rotating Desk for Collaboration by Two Computer Programmers

A special-purpose desk has been designed to facilitate collaboration by two computer programmers sharing one desktop computer or computer terminal. The impetus for the design is a trend toward what is known in the software industry as extreme programming an approach intended to ensure high quality without sacrificing the quantity of computer code produced. Programmers working in pairs is a major feature of extreme programming. The present desk design minimizes the stress of the collaborative work environment. It supports both quality and work flow by making it unnecessary for programmers to get in each other s way. The desk (see figure) includes a rotating platform that supports a computer video monitor, keyboard, and mouse. The desk enables one programmer to work on the keyboard for any amount of time and then the other programmer to take over without breaking the train of thought. The rotating platform is supported by a turntable bearing that, in turn, is supported by a weighted base. The platform contains weights to improve its balance. The base includes a stand for a computer, and is shaped and dimensioned to provide adequate foot clearance for both users. The platform includes an adjustable stand for the monitor, a surface for the keyboard and mouse, and spaces for work papers, drinks, and snacks. The heights of the monitor, keyboard, and mouse are set to minimize stress. The platform can be rotated through an angle of 40 to give either user a straight-on view of the monitor and full access to the keyboard and mouse. Magnetic latches keep the platform preferentially at either of the two extremes of rotation. To switch between users, one simply grabs the edge of the platform and pulls it around. The magnetic latch is easily released, allowing the platform to rotate freely to the position of the other user

Riley, John Thomas↗

DOE OSTI2017

Determination of critical experiment correlations for experiments involving highly enriched uranium solutions

Quantifying the correlations among critical experiments has become a topic of interest over the last 10-15 years. The correlations arise from the shared use of fissile material, non-fissile materials, fixtures, and procedures in multiple experiments or multiple experiment series. A Monte Carlo sampling technique proposed as a viable technical method to evaluate these correlations has been implemented within the SCALE 6.2 Sampler sequence. This paper presents the investigation of the use of this new tool and technique for highly enriched uranium solution experiments. One of the first attempts to quantify the correlations among critical experiments examined a series of highly enriched solution experiments, including the HST-001 series. These correlations are included in the International Criticality Safety Benchmark Evaluation Project Handbook, and they form a basis for methodology comparisons. Results generated using the Sampler implementation are compared with these previously published results. Additional studies involving the HST-001 experiment series are also presented. A range of different assumptions of the independence of the geometry components, enrichments, and other material compositions are implemented to investigate the impact of these assumptions on the correlation coefficients. These effects are investigated with these experiments because the calculation time is shorter for the solution experiments than for the low-enriched lattice experiments discussed in a companion paper. The magnitude of the effects of different independence assumptions on the correlation coefficients is important to establish which parameters must be clearly identified as shared or unique for accurate correlation determinations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

UnifyFS: A User-level Shared File System for Unified Access to Distributed Local Storage

We introduce UnifyFS, a user-level file system that aggregates node-local storage tiers available on high performance computing (HPC) systems and makes them available to HPC applications under a unified namespace. UnifyFS employs transparent I/O interception, so it does not require changes to application code and is compatible with commonly used HPC I/O libraries. The design of UnifyFS supports the predominant HPC I/O workloads and is optimized for bulk-synchronous I/O patterns. Furthermore, UnifyFS provides customizable file system semantics to flexibly adapt its behavior for diverse I/O workloads and storage devices. In this paper, we discuss the unique design goals and architecture of UnifyFS and evaluate its performance on a leadership-class HPC system. In our experimental results, we demonstrate that UnifyFS exhibits excellent scaling performance for write operations and can improve the performance of application checkpoint operations by as much as 3× versus a tuned configuration.

Brim, Michael↗

DOE OSTI2022

NEAMS Advanced Reactor Model Contributions to the NRIC Virtual Test Bed

The U.S. Department of Energy (DOE) Office of Nuclear Energy’s Advanced Modeling and Simulation (NEAMS) Program develops models of advanced reactor phenomena to demonstrate code applicability to challenging physics problems, drive code development through user assessment, and perform code verification and validation. Meanwhile, the U.S. DOE’s National Reactor Innovation Center (NRIC) hosts an open-source website and associated GitHub repository called the Virtual Test Bed (VTB) on which computational models for advanced reactors are documented and shared with the reactor community. Several NEAMS advanced reactor models (including input files, documentation, and discussion of results) have recently been contributed to the NRIC VTB. The open sharing of these models benefits the reactor community by providing “best practice” examples using NEAMS tools for advanced reactor physics problems. This report summarizes and provides links to these new models, which include modeling phenomena important to liquid metal cooled fast reactors, molten salt reactors, high temperature gas-cooled reactors, and microreactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1999

Efficient Parallelization of a Dynamic Unstructured Application on the Tera MTA

The success of parallel computing in solving real-life computationally-intensive problems relies on their efficient mapping and execution on large-scale multiprocessor architectures. Many important applications are both unstructured and dynamic in nature, making their efficient parallel implementation a daunting task. This paper presents the parallelization of a dynamic unstructured mesh adaptation algorithm using three popular programming paradigms on three leading supercomputers. We examine an MPI message-passing implementation on the Cray T3E and the SGI Origin2OOO, a shared-memory implementation using cache coherent nonuniform memory access (CC-NUMA) of the Origin2OOO, and a multi-threaded version on the newly-released Tera Multi-threaded Architecture (MTA). We compare several critical factors of this parallel code development, including runtime, scalability, programmability, and memory overhead. Our overall results demonstrate that multi-threaded systems offer tremendous potential for quickly and efficiently solving some of the most challenging real-life problems on parallel computers.

Oliker, Leonid↗

NASA NTRS1993

Adaptive digital beamforming for a CDMA mobile communications payload

In recent years, Spread-Spectrum Code Division Multiple Access (CDMA) has become a very popular access scheme for mobile communications due to a variety of reasons: excellent performance in multipath environments, high scope for frequency reuse, graceful degradation near saturation, etc. In this way, a CDMA system can support simultaneous digital communication among a large community of relatively uncoordinated users sharing a given frequency band. Nevertheless, there are also important problems associated with the use of CDMA. First, in a conventional CDMA scheme, the signature sequences of asynchronous users are not orthogonal and, as the number of active users increases, the self-noise generated by the mutual interference between users considerably degrades the performance, particularly in the return link. Furthermore, when there is a large disparity in received powers - due to differences in slant range or atmospheric attenuation - the non-zero cross-correlation between the signals gives rise to the so-called near-far problem. This leads to an inefficient utilization of the satellite resources and, consequently, to a drastic reduction in capacity. Several techniques were proposed to overcome this problem, such as Synchronized CDMA - in which the signature sequences of the different users are quasi-orthogonal - and power control. At the expense of increased network complexity and user coordination, these techniques enable the system capacity to be restored by equitably sharing the satellite resources among the users. An alternative solution is presented based upon the use of time-reference adaptive digital beamforming on board the satellite. This technique enables a high number of independently steered beams to be generated from a single phased array antenna, which automatically track the desired user signal and null the unwanted interference source. In order to use a time-reference adaptive antenna in a communications system, the main challenge is to obtain a reference signal highly correlated with the desired user signal and uncorrelated with the interferences. CDMA lends itself very easily to the generation of such a reference signal, thanks to the a priori knowledge of the user's signature sequence. First, the integration of an adaptive antenna in an asynchronous CDMA system is analyzed. The adaptive antenna system can provide increased interference rejection - much higher than that afforded by the code alone - and, since CDMA is mainly interference limited, any reduction in interference converts directly and linearly into an increase in capacity. Analyses and computer simulations are presented that show how an asynchronous CDMA system incorporating adaptive beamforming can provide at least as much capacity as a synchronous system. More importantly, the proposed concept allows the near-far effect to be mitigated without requiring a tight coordination of the users in terms of transmitted power control or network synchronization. The system is extremely robust to the near-far effect because the signals reaching the satellite from directions other than that of the desired user - which are likely to have different power levels - are adaptively canceled by the antenna. Finally, a payload architecture is presented that illustrates the practical implementation of this concept. This digital payload architecture demonstrates that with the advent of high performance CMOS digital processing, the on-board implementation of complex DSP techniques - in particular Digital Beamforming - has become possible, being most attractive for Mobile Satellite Communications.

Munoz-Garcia, Samuel G.↗

DOE OSTI2019

Portal and Repository for Information on Marine Renewable Energy (PRIMRE)

The Marine Renewable Energy (MRE) industry is in the early stages of development corresponding to low technology readiness levels (TRLs) where the ability of the MRE community (developers, researchers, academics, stakeholders, investors, and regulators) to work together to share knowledge, experience, and lessons learned is critical to the advancement of the entire MRE industry. Through collaboration on solving common problems, the MRE community has the potential to reduce cost and accelerate technology development. Currently, the US Department of Energy (US DOE) Water Power Technologies Office (WPTO) is addressing the challenge of storing, curating, and accessing MRE information by sponsoring development of MRE databases and information portals such as Tethys (https://tethys.pnnl.gov), OpenEI (https://openei.org), the MHK Data Repository (MHKDR, https://mhkdr.openei.org/), and a searchable MRE code catalog and open source code repository (MHKiT, currently under development), to name a few. These sites host scientific papers, news articles, reports, databases, open source codes, and stakeholder engagement information, but they are only a step towards facilitating global discovery and use. In short, there is an abundance of information available online, however it is located on many disparate sites and repositories that make the discovery of those data and information difficult. A DOE national laboratory team from the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Sandia National Laboratories (Sandia) is addressing the issues of data discoverability, shared knowledge, and interconnection of existing MRE databases and information portals. To meet the needs of the MRE community, as identified through multiple community outreach and engagement events, and described in this paper, the multi-lab team has developed an implementation plan for PRIMRE, the Portal and Repository for Information on Marine Renewable Energy. PRIMRE will provide broad access to information on engineering and technologies, resource characterization, device performance, and environmental effects of MRE projects. PRIMRE will facilitate the commercial development of the MRE industry by increasing the accessibility and discoverability of this information, integrating the databases and information portals described in this paper, and developing standards and guidelines. Providing consistent, easy access to information can help reduce duplication of effort and enable the MRE community to learn from past failures and build upon the successes of others to innovate and advance the commercialization of MRE technologies.

16 TIDAL AND WAVE POWER↗

DOE OSTI2021

Deadband Voltage Control and Power Buffering for Extreme Fast Charging Station

Voltage fluctuation is one of the most common challenges that electric vehicle charging station (EVCS) may introduce to the power grid. Local reactive power compensation (Q-compensation) capability of bi-directional electric vehicle (EV) chargers can mitigate the steady-state voltage violations caused by the EV charging itself or changes in the neighboring loads. Power buffering, using energy storage system (ESS), can be utilized to address the voltage transients (sags and swells) as a result of EV charging at the EVCS. To address PI controller’s ‘hunting’ issue, this paper proposes a Q-sign triggered deadband voltage control (V-control) method at the point of common coupling (PCC). In addition, to ensure the ramp rate of EV charging is within the allowable limits set forth by the grid code, a ramp rate control is proposed that uses the ESS as a ‘power buffer’. Lastly, different from most reported work in the literature where no explicit limit of the power electronic converters (PECs) is considered, this work considers a reasonable apparent power capacity limit of the PECs when achieving the V-control. This limit also affects the amount of active power that can be obtained from the grid, and subsequently may require ESS to function as ‘load sharing’ device to provide supplemental active power to satisfy EV load. A case study simulated in MATLAB (interfaced with PLECS) is presented to demonstrate the effectiveness of the proposed approaches for EVCS operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

NASA NTRS1988

Object Oriented Programming Systems (OOPS) and frame representations: An investigation of programming paradigms

The project was initiated to research Object Oriented Programming Systems (OOPS) and frame representation systems, their significance and applicability, and their implementation in or relationship to Ada. Object orientated is currently a very popular conceptual adjective. Object oriented programming, in particular, is promoted as a particularly productive approach to programming; an approach which maximizes opportunities for code reuse and lends itself to the definition of convenient and well-developed units. Such units are thus expected to be usable in a variety of situations, beyond the typical highly specific unit development of other approaches. Frame represenation systems share a common heritage and similar conceptual foundations. Together they represent a quickly emerging alternative approach to programming. The approach is to first define the terms, starting with relevant concepts and using these to put bounds on what is meant by OOPS and Frames. From this the possibilities were pursued to merge OOPS with Ada which will further elucidate the significant characteristics which make up this programming approach. Finally, some of the merits and demerits of OOPS were briefly considered as a way of addressing the applicability of OOPS to various programming tasks.

Auty, David↗

NASA NTRS2010

Satellite Data Simulator Unit: A Multisensor, Multispectral Satellite Simulator Package

Several multisensor simulator packages are being developed by different research groups across the world. Such simulator packages [e.g., COSP , CRTM, ECSIM, RTTO, ISSARS (under development), and SDSU (this article), among others] share overall aims, although some are targeted more on particular satellite programs or specific applications (for research purposes or for operational use) than others. The SDSU or Satellite Data Simulator Unit is a general-purpose simulator composed of Fortran 90 codes and applicable to spaceborne microwave radiometer, radar, and visible/infrared imagers including, but not limited to, the sensors listed in a table. That shows satellite programs particularly suitable for multisensor data analysis: some are single satellite missions carrying two or more instruments, while others are constellations of satellites flying in formation. The TRMM and A-Train are ongoing satellite missions carrying diverse sensors that observe clouds and precipitation, and will be continued or augmented within the decade to come by future multisensor missions such as the GPM and Earth-CARE. The ultimate goals of these present and proposed satellite programs are not restricted to clouds and precipitation but are to better understand their interactions with atmospheric dynamics/chemistry and feedback to climate. The SDSU's applicability is not technically limited to hydrometeor measurements either, but may be extended to air temperature and humidity observations by tuning the SDSU to sounding channels. As such, the SDSU and other multisensor simulators would potentially contribute to a broad area of climate and atmospheric sciences. The SDSU is not optimized to any particular orbital geometry of satellites. The SDSU is applicable not only to low-Earth orbiting platforms as listed in Table 1, but also to geostationary meteorological satellites. Although no geosynchronous satellite carries microwave instruments at present or in the near future, the SDSU would be useful for future geostationary satellites with a microwave radiometer and/or a radar aboard, which could become more feasible as engineering challenges are met. In this short article, the SDSU algorithm architecture and potential applications are reviewed in brief.

Masunaga, Hirohiko↗

NASA NTRS2013

CFD Analysis for Assessing the Effect of Wind on the Thermal Control of the Mars Science Laboratory Curiosity Rover

The challenging range of landing sites for which the Mars Science Laboratory Rover was designed, requires a rover thermal management system that is capable of keeping temperatures controlled across a wide variety of environmental conditions. On the Martian surface where temperatures can be as cold as -123 C and as warm as 38 C, the rover relies upon a Mechanically Pumped Fluid Loop (MPFL) Rover Heat Rejection System (RHRS) and external radiators to maintain the temperature of sensitive electronics and science instruments within a -40 C to 50 C range. The RHRS harnesses some of the waste heat generated from the rover power source, known as the Multi Mission Radioisotope Thermoelectric Generator (MMRTG), for use as survival heat for the rover during cold conditions. The MMRTG produces 110 W of electrical power while generating waste heat equivalent to approximately 2000 W. Heat exchanger plates (hot plates) positioned close to the MMRTG pick up this survival heat from it by radiative heat transfer. Winds on Mars can be as fast as 15 m/s for extended periods. They can lead to significant heat loss from the MMRTG and the hot plates due to convective heat pick up from these surfaces. Estimation of this convective heat loss cannot be accurately and adequately achieved by simple textbook based calculations because of the very complicated flow fields around these surfaces, which are a function of wind direction and speed. Accurate calculations necessitated the employment of sophisticated Computational Fluid Dynamics (CFD) computer codes. This paper describes the methodology and results of these CFD calculations. Additionally, these results are compared to simple textbook based calculations that served as benchmarks and sanity checks for them. And finally, the overall RHRS system performance predictions will be shared to show how these results affected the overall rover thermal performance.

wind↗