Search NASA⌕ Search

SEARCH · Search NASA

Results for “code verification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Finite Volume Method Based Neutronic Solvers for Steady and Transient Analysis of Molten Salt Reactors

In recent years, the coupled neutronics and thermal hydraulics analysis becomes more and more important, because it helps to identify the most relevant safety issues without conservative assumptions. In addition, such coupled simulations are essential for the generation IV advanced nuclear power systems such as molten salt reactor (MSR), because the presence of strong coupling between different phenomena, like the transport of delayed neutron precursors by the fluid flow?. Due to the different discretization methods used in reactor physics analysis and thermal-hydraulics analysis, it is hard to couple different kinds of codes. This work presents an attempt to solve the multigroup neutron diffusion equation with the finite volume method which is quite widely used for the numerical simulation of a variety of applications involving fluid flow and heat and mass transfer. The unstructured finite volume method (FVM) based on open source C++ library OpenFOAM was chosen as the development platform?. The objective of this paper is to concisely present the main features of the developed codes in terms of the theoretical background and numerical approach and as can be seen in the following sections, the calculation results obtained by the NDSFoam which solves the steady-state neutron diffusion equation and NDTFoam which solves the transient-state neutron diffusion equation are discussed and compared to the benchmark problems. In this paper, two new neutronic solvers using finite volume method have been developed to perform the neutron physics analysis. The solvers are based on OpenFOAM, and have been tested with several steady state and transient-state benchmark problems. By verifications of the codes, it is proved that the development of NDSFoam and NDTFoam are correct. In our future work, both of these two solvers will be coupled with the precompiled CFD solvers in OpenFOAM to analyze the molten salt fast reactors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CaveMan Enterprise version 1.0 Software Validation and Verification.

The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prise has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.

Hart, David↗

Simulation of ultra-relativistic electrons and positrons channeling in crystals with MBN EXPLORER

A newly developed code, implemented as a part of the MBN EXPLORER package (Solov'yov et al., 2012; (http://www.mbnexplorer.com/), 2012) [1,2] to simulate trajectories of an ultra-relativistic projectile in a crystalline medium, is presented. The motion of a projectile is treated classically by integrating the relativistic equations of motion with account for the interaction between the projectile and crystal atoms. The probabilistic element is introduced by a random choice of transverse coordinates and velocities of the projectile at the crystal entrance as well as by accounting for the random positions of the atoms due to thermal vibrations. The simulated trajectories are used for numerical analysis of the emitted radiation. Initial approbation and verification of the code have been carried out by simulating the trajectories and calculating the radiation emitted by ε=6.7 GeV and ε=855 MeV electrons and positrons in oriented Si(110) crystal and in amorphous silicon. The calculated spectra are compared with the experimental data and with predictions of the Bethe–Heitler theory for the amorphous environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robust verification analysis

We introduce a new methodology for inferring the accuracy of computational simulations through the practice of solution verification. We demonstrate this methodology on examples from computational heat transfer, fluid dynamics and radiation transport. Our methodology is suited to both well- and ill-behaved sequences of simulations. Our approach to the analysis of these sequences of simulations incorporates expert judgment into the process directly via a flexible optimization framework, and the application of robust statistics. The expert judgment is systematically applied as constraints to the analysis, and together with the robust statistics guards against over-emphasis on anomalous analysis results. We have named our methodology Robust Verification. Our methodology is based on utilizing multiple constrained optimization problems to solve the verification model in a manner that varies the analysis' underlying assumptions. Constraints applied in the analysis can include expert judgment regarding convergence rates (bounds and expectations) as well as bounding values for physical quantities (e.g., positivity of energy or density). This approach then produces a number of error models, which are then analyzed through robust statistical techniques (median instead of mean statistics). This provides self-contained, data and expert informed error estimation including uncertainties for both the solution itself and order of convergence. Our method produces high quality results for the well-behaved cases relatively consistent with existing practice. The methodology can also produce reliable results for ill-behaved circumstances predicated on appropriate expert judgment. We demonstrate the method and compare the results with standard approaches used for both code and solution verification on well-behaved and ill-behaved simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Verification-Driven Approach to Traceability and Documentation for Auto-Generated Mathematical Software

Model-based development and automated code generation are increasingly used for production code in safety-critical applications, but since code generators are typically not qualified, the generated code must still be fully tested, reviewed, and certified. This is particularly arduous for mathematical and control engineering software which requires reviewers to trace subtle details of textbook formulas and algorithms to the code, and to match requirements (e.g., physical units or coordinate frames) not represented explicitly in models or code. Both tasks are complicated by the often opaque nature of auto-generated code. We address these problems by developing a verification-driven approach to traceability and documentation. We apply the AUTOCERT verification system to identify and then verify mathematical concepts in the code, based on a mathematical domain theory, and then use these verified traceability links between concepts, code, and verification conditions to construct a natural language report that provides a high-level structured argument explaining why and how the code uses the assumptions and complies with the requirements. We have applied our approach to generate review documents for several sub-systems of NASA s Project Constellation.

Denney, Ewen W.↗

EVALUATION OF ZERO-POWER, ELEVATED-TEMPERATURE MEASUREMENTS AT JAPAN’S HIGH TEMPERATURE ENGINEERING TEST REACTOR

The High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Agency (JAEA) is a 30 MWth, graphite-moderated, helium-cooled reactor that was constructed with the objectives to establish and upgrade the technological basis for advanced high-temperature gas-cooled reactors (HTGRs) as well as to conduct various irradiation tests for innovative high-temperature research. The core size of the HTTR represents about one-half of that of future HTGRs, and the high excess reactivity of the HTTR, necessary for compensation of temperature, xenon, and burnup effects during power operations, is similar to that of future HTGRs. During the start-up core physics tests of the HTTR, various annular cores were formed to provide experimental data for verification of design codes for future HTGRs. The experimental benchmark performed and currently evaluated in this report pertains to the data available for two zero-power, warm-critical measurements with the fully-loaded HTTR core. Six isothermal temperature coefficients for the fully-loaded core from approximately 340 to 740 K have also been evaluated. These experiments were performed as part of the power-up tests (References 1 and 2). Evaluation of the start-up core physics tests specific to the fully-loaded core (HTTR-GCR-RESR-001) and annular start-up core loadings (HTTR-GCR-RESR-002) have been previously evaluated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of the Start-Up Core Physics Tests at Japan's High Temperature Engineering Test Reactor (Annular Core Loadings)

The High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Agency (JAEA) is a 30 MWth, graphite-moderated, helium-cooled reactor that was constructed with the objectives to establish and upgrade the technological basis for advanced high-temperature gas-cooled reactors (HTGRs) as well as to conduct various irradiation tests for innovative high-temperature research. The core size of the HTTR represents about one-half of that of future HTGRs, and the high excess reactivity of the HTTR, necessary for compensation of temperature, xenon, and burnup effects during power operations, is similar to that of future HTGRs. During the start-up core physics tests of the HTTR, various annular cores were formed to provide experimental data for verification of design codes for future HTGRs. The Japanese government approved construction of the HTTR in the 1989 fiscal year budget; construction began at the Oarai Research and Development Center in March 1991 and was completed May 1996. Fuel loading began July 1, 1998, from the core periphery. The first criticality was attained with an annular core on November 10, 1998 at 14:18, followed by a series of start-up core physics tests until a fully-loaded core was developed on December 16, 1998. Criticality tests were carried out into January 1999. The first full power operation with an average core outlet temperature of 850ºC was completed on December 7, 2001, and operational licensing of the HTTR was approved on March 6, 2002. The HTTR attained high temperature operation at 950 ºC in April 19, 2004. After a series of safety demonstration tests, it will be used as the heat source in a hydrogen production system by 2015. Hot zero-power critical, rise-to-power, irradiation, and safety demonstration testing , have also been performed with the HTTR, representing additional means for computational validation efforts. Power tests were performed in steps from 0 to 30 MW, with various tests performed at each step to confirm core characteristics, thermal-hydraulic properties, and radiation shielding. The high-temperature test operation at 950 ºC represented the fifth and final phase of the rise-to-power tests. The safety tests demonstrated inherent safety features of the HTTR such as slow temperature response during abnormal events due to the large heat capacity of the core and the negative reactivity feedback. The experimental benchmark performed and currently evaluated in this report pertains to the data available for the annular core criticals from the initial six isothermal, annular and fully-loaded, core critical measurements performed at the HTTR. Evaluation of the start-up core physics tests specific to the fully-loaded core is compiled elsewhere (HTTR-GCR-RESR-001).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty quantification's role in modeling and simulation planning, and credibility assessment through the predictive capability maturity model

The importance of credible, trustworthy numerical simulations is obvious especially when using the results for making high-consequence decisions. Determining the credibility of such numerical predictions is much more difficult and requires a systematic approach to assessing predictive capability, associated uncertainties and overall confidence in the computational simulation process for the intended use of the model. This process begins with an evaluation of the computational modeling of the identified, important physics of the simulation for its intended use. This is commonly done through a Phenomena Identification Ranking Table (PIRT). Then an assessment of the evidence basis supporting the ability to computationally simulate these physics can be performed using various frameworks such as the Predictive Capability Maturity Model (PCMM). There were several critical activities that follow in the areas of code and solution verification, validation and uncertainty quantification, which will be described in detail in the following sections. Here, we introduce the subject matter for general applications but specifics are given for the failure prediction project. In addition, the first task that must be completed in the verification & validation procedure is to perform a credibility assessment to fully understand the requirements and limitations of the current computational simulation capability for the specific application intended use. The PIRT and PCMM are tools used at Sandia National Laboratories (SNL) to provide a consistent manner to perform such an assessment. Ideally, all stakeholders should be represented and contribute to perform an accurate credibility assessment. PIRTs and PCMMs are both described in brief detail below and the resulting assessments for an example project are given.

97 MATHEMATICS AND COMPUTING↗

Exact relativistic expressions for polarization of incoherent Thomson scattering

We present a derivation of the degree of polarization for incoherent Thomson scattering (TS) using Mueller matrix formalism. An exact analytic solution is obtained for spectrum-integrated matrix elements. The solution is valid for the full range of incident polarizations, scattering angles, and electron thermal motion from non-relativistic to ultra-relativistic. It is based on a newly developed theoretical model, a finite transit time (FTT) correction to previous theoretical work on TS polarization. The Mueller matrix elements are substantially different from previous calculations without the FTT correction, even to the lowest linear order in T e =m e c 2 <<1. Mathematically, the derivation is a unique example of fully analytical integration of the 3D scattering operator over a relativistic Maxwellian distribution function; experimentally, the results have application to the use of the polarization properties of Thomson scattered light as a method of electron temperature measurement. The results can also be used as a reliable tool for benchmarking and verification of numerical codes for frequency resolved properties of TS polarization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Weibel-like instability in magnetohydrodynamics

In magnetohydrodynamics (MHD), a density perturbation perpendicular to an electron temperature gradient generates a magnetic field around itself that acts to increase the perturbation, which can lead to instability. An MHD dispersion relation is obtained for perturbations perpendicular to a fixed electron temperature gradient with an initial in-plane magnetic field, including resistivity, viscosity, and the electrothermal coefficient. Instability occurs for sufficiently small electron temperature-gradient scale lengths determined by the ion collisionless skin depth. Both viscosity and resistivity are required to prevent growth at arbitrarily small spatial scales and to give a physical result for the fastest growing mode. The perpendicular electrothermal coefficient is only significant for a narrow range of low electron Hall parameters, causing a modest reduction in magnetic field growth and modifying the criteria for instability in the presence of viscosity. If the definition of the Weibel instabilityis extended to include all instabilities due to anisotropy in the electron velocity distribution, then this is a Weibel-like instability because an electron temperature gradient implies an anisotropic electron velocity distribution. Here, the implications for the formation of filaments in laser-produced plasmas and for the verification of MHD codes are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multimode turbulent flow measurements using magnetic resonance imaging- and laser-based techniques and computational fluid dynamics simulations

We studied the flow field characteristics of a turbulent flow over a regularized cube array with a perpendicular injection flow through the floor between the second and third cubical elements, representing the complex flow interactions of a 3D jet and the wake flows behind cubical obstacles. Four different experimental measurements were performed: two magnetic resonance imaging-based measurements for three-dimensional three-component velocity (MRV) and concentration (MRC) and two laser-based techniques, particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF), for two-dimensional two-component velocity and concentration measurement, respectively. The mainstream Reynolds number is Re = 15 000⁠, based on the primary inlet velocity U m and channel height D H ⁠, whereas the injector Reynolds number is Re j = 3400⁠, based on the injector velocity U j and the injector's exit width D j ⁠. Numerical simulations were performed for the studied flow configuration of turbulent flow over a regularized cube array using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches. Results obtained from experimental measurements—including MRV, MRC, PIV, and PLIF—as well as RANS and LES simulations are discussed and compared along several horizontal and vertical planes of the studied configuration. In addition, 3D turbulent flow structures, such as leading-edge vortex, horseshoe vortex, and jet shear-layer vortex, and the isosurfaces of scalar concentration successfully revealed by MRV and MRC techniques were found to be in very good agreement with those 3D features extracted from RANS and LES simulations. In conclusion, the high-resolution experimental and numerical database obtained from this study could be useful for validation and verification of numerical codes.

Computational fluid dynamics↗

TInCup

SAND2025-11464O TInCuP (Tag Invoked Customization Points) is a modern, header-only C++20 library that addresses the boilerplate problem in tag invoke based customization points. It provides comprehensive code generation and verification tools. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

von Winckel, Gregory [Sandia National Lab. (SNL-CA↗

Sockeye Validation Support Using the SPHERE Facility

The engineering-scale heat pipe application Sockeye, being developed through the Nuclear En- ergy Advanced Modeling and Simulation program is concurrently undergoing code development and verification and validation activities. The Single Primary Heat Extraction and Removal Emu- lator (SPHERE) facility at Idaho National Laboratory has performed numerous sodium heat pipe experiments, one of which is modeled in this work to support Sockeye validation. Heat pipe data produced by the SPHERE facility was found to be very useful not only for Sockeye validation but also as a useful resource for model development. A Sockeye simulation performed using Sockeye’s conduction model modeled an experimental run at SPHERE and was found to be able to accurately reproduce the steady temperature distribution but revealed discrepancies in transient behavior after shutoff of the power. This effort also revealed a number of challenges of modeling an experimental setup such as SPHERE, for example, the importance of details in the setup such as possible gaps in insulation. Also, continuous collaboration between Sockeye developers and SPHERE experimentalists has been established, which allows future experiments to be refined in response to questions and challenges found by simulating earlier experiments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

C++ Implementation of IAPWS Water Properties

For the calculations of water-involved systems, such as safety analysis of light water reactors, it is essential to provide accurate water properties. The International Association for the Properties of Water and Steam is an international non-profit association of national organizations concerned with the properties of water and steam. It provides internationally accepted formulations of water/steam properties for scientific and industrial applications. The purpose of this work is to provide a stand-alone software package in C++ programming language to provide accurate and efficient water/steam properties evaluation, based on the latest IAPWS releases. The discussion on related IAPWS releases, code implementations and verifications are provided in details.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Pararhombi: Parallel Implementation of 3-D Seismic Wave Propagation in Orthorhombic Media

Many earth materials and minerals are seismically anisotropic; however, due to the weakness of anisotropy and for simplicity, the earth is often approximated as an isotropic medium. Specific circumstances, such as in shales, tectonic fabrics, or oriented fractures, for example, require the use of anisotropic simulations in order to accurately model the earth. This report details the development of a new massively parallel 3-D full seismic waveform simulation algorithm within the principle coordinate system of an orthorhombic material, which is a specific form of anisotropy common in layered, fractured media. The theory and implementation of Pararhombi is described along with verification of the code against other solutions.

58 GEOSCIENCES↗

ATDM report to ECP AD FY18Q4

A comprehensive V&V study of hypersonic flow in SPARC validated against several experiments was produced. This work was successfully completed as an official ASC L2 milestone with an external review of the team's work. Our work has provided a basis for utilizing SPARC as credible analysis tool for hypersonic re-entry flows. The V&V process has been exercised in full breadth including applicable frameworks, professional standards, code and solution verification, calibration, sensitivity analysis and parametric uncertainty.

97 MATHEMATICS AND COMPUTING↗

Pararhombi: Parallel Implementation of 3-D Seismic Wave Propagation in Orthorhombic Media

Many earth materials and minerals are seismically anisotropic; however, due to the weakness of anisotropy and for simplicity, the earth is often approximated as an isotropic medium. Specific circumstances, such as in shales, tectonic fabrics, or oriented fractures, for example, require the use of anisotropic simulations in order to accurately model the earth. This report details the development of a new massively parallel 3-D full seismic waveform simulation algorithm within the principle coordinate system of an orthorhombic material, which is a specific form of anisotropy common in layered, fractured media. The theory and implementation of Pararhombi is described along with verification of the code against other solutions.

58 GEOSCIENCES↗

TNSL Overview

Thermal neutron scattering law (TNSL) data describe low-energy neutrons scattering off of bound materials, and can have a significant impact on modeling any system with slow neutrons, including nuclear reactors. Previous work to introduce TNSL data to neutron transport codes at LLNL focused on COG and TART [1], with the limitation that these codes require highly specialized data processing and formatting. We have recently increased efforts to process TNSL data with the central LLNL nuclear data processing code FUDGE, to be stored in the generalized nuclear database structure (GNDS) for use in any general transport code with the ability to read GNDS data. The first step in this effort is to verify that the TNSL processing with FUDGE yields results comparable to results obtained using the LANL nuclear data processing code NJOY. The next step is to verify the transport of thermal neutrons in Mercury (a Monte Carlo code) and Ardra (a deterministic code) against one another, as well as against the LANL Monte Carlo neutron transport code MCNP. This verification step has not been completed, due to a number of discrepancies between results obtained using differently processed data. There is ongoing effort to understand differences between FUDGE and NJOY. Finally, we map out our current capability to validate TNSL data against benchmark systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗