Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Three-dimensional coherent X-ray diffractive imaging of whole frozen-hydrated cells

Here, a structural understanding of whole cells in three dimensions at high spatial resolution remains a significant challenge and, in the case of X-rays, has been limited by radiation damage. By alleviating this limitation, cryogenic coherent diffractive imaging (cryo-CDI) can in principle be used to bridge the important resolution gap between optical and electron microscopy in bio-imaging. Here, the first experimental demonstration of cryo-CDI for quantitative three-dimensional imaging of whole frozen-hydrated cells using 8 Kev X-rays is reported. As a proof of principle, a tilt series of 72 diffraction patterns was collected from a frozen-hydrated Neospora caninum cell and the three-dimensional mass density of the cell was reconstructed and quantified based on its natural contrast. This three-dimensional reconstruction reveals the surface and internal morphology of the cell, including its complex polarized sub-cellular structure. Finally, it is believed that this work represents an experimental milestone towards routine quantitative three-dimensional imaging of whole cells in their natural state with spatial resolutions in the tens of nanometres.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis and structural characterization of Al{sub 7}C{sub 3}N{sub 3}-homeotypic aluminum silicon oxycarbonitride, (Al{sub 7-x}Si{sub x})(O{sub y}C{sub z}N{sub 6-y-z}) (x{approx}1.2, y{approx}1.0 and z{approx}3.5)

A new aluminum silicon oxycarbonitride, (Al{sub 5.8}Si{sub 1.2})(O{sub 1.0}C{sub 3.5}N{sub 1.5}), has been synthesized and characterized by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS). The title compound is hexagonal with space group P6{sub 3}/mmc and unit-cell dimensions a=0.322508(4) nm, c=3.17193(4) nm and V=0.285717(6) nm{sup 3}. The atom ratios of Al:Si and those of O:C:N were, respectively, determined by EDX and EELS. The initial structural model was successfully derived from the XRPD data by the direct methods and further refined by the Rietveld method. The crystal is most probably composed of four types of domains with nearly the same fraction, each of which is isotypic to Al{sub 7}C{sub 3}N{sub 3} with space group P6{sub 3}mc. The existence of another new oxycarbonitride (Al{sub 6.6}Si{sub 1.4})(O{sub 0.7}C{sub 4.3}N{sub 2.0}), which must be homeotypic to Al{sub 8}C{sub 3}N{sub 4}, has been also demonstrated by XRPD and TEM. - Graphical abstract: A new oxycarbonitride discovered in the Al-Si-O-C-N system, (Al{sub 7-x}Si{sub x})(O{sub y}C{sub z}N{sub 6-y-z}) (x{approx}1.2, y{approx}1.0 and z{approx}3.5). The crystal is composed of four types of domains (I, II, III and IV), and hence the structure is represented by a split-atom model. Individual crystal structures can be regarded as layered structures, which consist of A-type [(Al, Si){sub 4}(O, C, N){sub 4}] unit layers and B-type [(Al, Si)(O, C, N){sub 2}] single layers. Highlights: > (Al{sub 5.8}Si{sub 1.2})(O{sub 1.0}C{sub 3.5}N{sub 1.5}) as a new aluminum silicon oxycarbonitride. > Crystal structure is determined and represented by a split-atom model. > Existence of another new oxycarbonitride (Al{sub 6.6}Si{sub 1.4})(O{sub 0.7}C{sub 4.3}N{sub 2.0}) is demonstrated. > Both new materials are formed by oxidation and nitridation of (Al, Si){sub 6}(O, C){sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of epitaxial metastable NiGe{sub 2} thin film on Ge(100) by pulsed excimer laser anneal

Epitaxial nickel digermanide (NiGe{sub 2}), a metastable phase, was formed by laser annealing Ni on (100) germanium-on-silicon substrates. The NiGe{sub 2} formation was investigated using transmission electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, Rutherford backscattering spectroscopy, and first-principles calculations. The formation mechanism of NiGe{sub 2} is discussed and is attributed to both the reduced interfacial energy at the NiGe{sub 2}/Ge(100) interface and the kinetic aspects of the laser annealing reaction associated with phase transformation and film agglomeration.

36 MATERIALS SCIENCE↗

Original electrochemical mechanisms of CaSnO{sub 3} and CaSnSiO{sub 5} as anode materials for Li-ion batteries

Calcium stannate (CaSnO{sub 3}) and malayaite (CaSnSiO{sub 5}) were synthesized by means of a high temperature solid-state reaction. Their crystal structures and morphologies were characterized by X-ray diffraction (XRD) and Scanning Electron Microscopy; their electrochemical properties were analyzed by galvanostatic tests. The amorphization of the initial electrode materials was followed by XRD. The first discharge of the oxides CaSnO{sub 3} and CaSnSiO{sub 5} shows a plateau at low potential, which is due to the progressive formation of Li-Ca-Sn and/or Li-Sn alloys as shown by {sup 119}Sn Moessbauer spectroscopy. The results reveal similar electrochemical mechanisms for CaSnO{sub 3} and CaSnSiO{sub 5} but they completely differ from those related to SnO{sub 2}. - Graphical abstract: {sup 119}Sn Moessbauer spectra at the end of the first discharge of CaSnO{sub 3} (dashed line) and CaSnSiO{sub 5} (solid line) anodes for Li-ion batteries. Inset shows that relative amounts of Sn(0) based alloys formed during the first discharge are similar for CaSnO{sub 3} and CaSnSiO{sub 5} pristine materials. Highlights: > CaSnSiO{sub 5} and CaSnO{sub 3} as anode materials for Li-ion batteries. > X-ray diffraction and Moessbauer spectroscopy, to explain the electrochemical mechanisms. > Similar mechanisms for the two compounds but different from those of SnO{sub 2} due to Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing defects in chemically synthesized ZnO nanostrucures by positron annihilation and photoluminescence spectroscopy

The present article describes the size induced changes in the structural arrangement of intrinsic defects present in chemically synthesized ZnO nanoparticles of various sizes. Routine x-ray diffraction and transmission electron microscopy have been performed to determine the shapes and sizes of the nanocrystalline ZnO samples. Detailed studies using positron annihilation spectroscopy reveals the presence of zinc vacancy. Whereas analysis of photoluminescence results predict the signature of charged oxygen vacancies. The size induced changes in positron parameters as well as the photoluminescence properties, has shown contrasting or nonmonotonous trends as size varies from 4 to 85 nm. Small spherical particles below a critical size ({approx}23 nm) receive more positive surface charge due to the higher occupancy of the doubly charge oxygen vacancy as compared to the bigger nanostructures where singly charged oxygen vacancy predominates. This electronic alteration has been seen to trigger yet another interesting phenomenon, described as positron confinement inside nanoparticles. Finally, based on all the results, a model of the structural arrangement of the intrinsic defects in the present samples has been reconciled.

36 MATERIALS SCIENCE↗

2.8 {mu}m emission from type-I quantum wells grown on InAs{sub x}P{sub 1-x}/InP metamorphic graded buffers

We report 2.8 {mu}m emission from compressively strained type-I quantum wells (QWs) grown on InP-based metamorphic InAs{sub x}P{sub 1-x} step-graded buffers. High quality metamorphic graded buffers showed smooth surface morphology and low threading dislocation densities of approximately 2.5 Multiplication-Sign 10{sup 6} cm{sup -2}. High-resolution x-ray diffraction scans showed strong satellites from multiple quantum wells grown on metamorphic buffers, and cross-sectional transmission electron microscopy revealed smooth and coherent quantum well interfaces. Room-temperature photoluminescence emission at 2.8 {mu}m with a narrow linewidth ({approx}50 meV) shows the promise of metamorphic growth for mid-infrared laser diodes on InP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

AlN thin films grown on epitaxial 3C-SiC (100) for piezoelectric resonant devices

Highly c-axis oriented heteroepitaxial aluminum nitride (AlN) films were grown on epitaxial cubic silicon carbide (3C-SiC) layers on Si (100) substrates using alternating current reactive magnetron sputtering at temperatures between approximately 300-450 deg. C. The AlN films were characterized by x-ray diffraction, scanning electron microscope, and transmission electron microscopy. A two-port surface acoustic wave device was fabricated on the AlN/3C-SiC/Si composite structure, and an expected Rayleigh mode exhibited a high acoustic velocity of 5200 m/s. The results demonstrate the potential of utilizing AlN films on epitaxial 3C-SiC layers to create piezoelectric resonant devices.

36 MATERIALS SCIENCE↗

Strain-associated nanoscale fluctuating lithium transport within single-crystalline LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathode particles

Solid-state lithium diffusion dynamics are critical for the rate capability and longevity of Li-ion batteries. Conventionally, nanoscale lithium diffusion within individual battery particles has been simplified as being primarily driven by concentration gradients, despite the associated processes inducing local lattice expansion, contraction, and strain fields. Using operando scanning transmission soft X-ray microscopy with high spatial resolution and chemical sensitivity to track nanoscale intraparticle lithium transport, and post-cycling Bragg coherent diffraction X-ray imaging to directly reveal three-dimensional intraparticle strain fields, we uncover strain-associated lithium transport dynamics within single-crystalline LiNi 1/3 Mn 1/3 Co 1/3 O 2 (scNMC) particles during cycling. Contrary to the expected thermodynamic solid-solution behavior of scNMC, our observations reveal near-uniform but fluctuating regions of lithium-dense and lithium-dilute areas during cycling. These fluctuations suggest that nanoscale lithium diffusion can proceed counter to concentration gradients. Additionally, we demonstrate that an increased presence of lithium-dilute regions near the surface enhances lithium surface insertion kinetics, emphasizing the importance of controlling surface lithium distribution to improve rate performance. Our study provides insights into nanoscale solid-state ion transport, with potential applications in batteries, solid-state fuel cells, and memristors.

Lee, Danwon [Seoul National Univ. (Korea, Republic↗

Room Temperature Ferromagnetism in Cu Doped ZnO Thin Films

We report on the growth of Cu doped ZnO thin films for different Cu concentration from 0.1%, to10% by RF magnetron sputtering. The X-ray diffraction study has shown single phase wurtzite type ZnO thin films with no evidence of copper/copper oxide or any other secondary phases. Room temperature ferromagnetism was observed in RF sputtered Cu doped ZnO films with magnetic moment per Cu atom first increasing and then decreasing with an increasing Cu content. Decrease of band gap with Cu doping, indicating strong p-d mixing of O and Cu is clear by the absorption spectroscopy study. The surface morphology by AFM of pure and Cu doped ZnO thin films show average grain size of 110nm and RMS surface roughness of 2.15 nm.

36 MATERIALS SCIENCE↗

VNb{sub 9}O{sub 25-{delta}}-Synthesis, electrical conducting behaviour and density functional theory (DFT) calculation

In order to investigate the influence of the oxygen partial pressure (p(O{sub 2})) on the electrical conductivity, VNb{sub 9}O{sub 25} was prepared by thermal decomposition of freeze-dried oxalate precursors and by a solid state reaction of V{sub 2}O{sub 5}/Nb{sub 2}O{sub 5} mixtures. The samples were characterised by X-ray diffraction, grain size analysis and scanning electron microscopy (SEM). The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. Partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap. The calculated activation energy values are in good agreement with the experimental ones. - Graphical Abstract: The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. The partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap.

36 MATERIALS SCIENCE↗

TEM and Moessbauer Study of Nano Sized Fe{sub 2}MnAl Flakes

Magnetic and structural properties of L21 ordered Fe{sub 2}MnAl Heusler alloy have been studied by X-ray diffraction, Transmission electron microscopy (TEM), Moessbauer spectroscopy and DC magnetization. Structural texturing induced by ball milling is destroyed on heating while Moessbauer and DC magnetization studies show magnetic texturing persists after thermal treatment. TEM shows large distribution in particle size with an average size of 27 nm. Thermal annealing of ball milled sample results L2{sub 1} ordering and the needle shaped particle contributes spin texturing.

36 MATERIALS SCIENCE↗

The local structure and composition of Ba{sub 4}Nb{sub 2}O{sub 9}-based oxycarbonates

X-ray powder-diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), infrared spectroscopy (IR), thermogravimetry (TG) and mass spectroscopy (MS) were performed to investigate the composition and the crystal structure of tetra-barium di-niobate (V) Ba{sub 4}Nb{sub 2}O{sub 9}. The TG, MS and IR studies revealed that the compound is a hydrated oxycarbonate. Assuming that the carbonate stoichiometrically replaces oxygen, the composition of the low-temperature {alpha}-modification, obtained by slow cooling from 1100 {sup o}C, corresponds to Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1H{sub 2}O, while the quenched high-temperature {gamma}-modification has the Ba{sub 4}Nb{sub 2}O{sub 8.42}(CO{sub 3}){sub 0.58}.0.38H{sub 2}O composition. The {alpha}-phase has a composite incommensurately modulated structure consisting of two mutually interacting [Ba]{sub {infinity}} and the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystems. The composite modulated crystal structure of the {alpha}-phase can be described with the lattice parameters a=10.2688(1) A, c=2.82426(8) A, q=0.66774(2)c* and a superspace group R3{sup -bar }m(00{gamma})0s. The HRTEM analysis demonstrates the nanoscale twinning of the trigonal domains parallel to the {l_brace}1 0 0{r_brace} crystallographic planes. The twinning introduces a one-dimensional disorder into the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystem, which results in an average P6{sup -bar }2c crystal structure of the {alpha}-phase. Possible places for the carbonate group in the structure are discussed using a comparison with other hexagonal perovskite-based oxycarbonates. - Graphical abstract: The composition and the local crystal structure of generally known {alpha}-Ba{sub 4}Nb{sub 2}O{sub 9} was studied. The compound is hydrated oxycarbonate with the composition of Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1 H{sub 2}O. It has a composite incommensurately modulated structure consisting of two mutually interacting subsystems, i.e., [Ba]{infinity} and the [(Nb,)O{sub 3}]{infinity} subsystem.

36 MATERIALS SCIENCE↗

Multistep damage evolution process in cubic zirconia irradiated with MeV ions

This work reports the study, via the combination of Rutherford backscattering spectrometry and channeling, x-ray diffraction, and transmission electron microscopy experiments, of the damage formation in cubic yttria-stabilized zirconia single crystals irradiated with medium-energy (4 MeV) heavy (Au) ions. The damage buildup, which is accounted for in the framework of the multistep damage accumulation model, occurs in three steps. The first step at low fluences (up to 10{sup 15} cm{sup -2}), characterized by a regular increase in both the damage yield and the elastic strain, is related to the formation of small defect clusters. The second step in the intermediate fluence range (from 10{sup 15} to 5x10{sup 15} cm{sup -2}) leads to a sharp increase in the damage yield and to a large drop of the strain due to the formation of dislocation loops which collapse into a network of tangled dislocations. The third step at high fluences (above 5x10{sup 15} cm{sup -2}) exhibits a surprising decrease in the damage yield, which may be attributed to the reorganization of the dislocation network that leads to the formation of weakly damaged regions with a size of the order of 100 nm.

36 MATERIALS SCIENCE↗

Effect of biphase on dielectric properties of Bi-doped lead strontium titanate thin films

Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} (PST) thin films doped with various concentration of Bi were prepared by a sol-gel method. The phase status, surface morphology and dielectric properties of these thin films were measured by X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance analyzer, respectively. Results showed that the thin films with the maximum dielectric constant and minimum dielectric loss were obtained for x=0.15. For x<0.15, only pure PST perovskite phase were in the thin films. For 0.2<x<0.4, the PST/Bi{sub 2}Ti{sub 2}O{sub 7} biphase were obtained. The thin films with pure Bi{sub 2}Ti{sub 2}O{sub 7} pyrochlore phase were obtained for x=0.67. The biphase thin films had high tunability and high figure of merit (FOM). The FOM of PST/Bi{sub 2}Ti{sub 2}O{sub 7} biphase thin film was about 6 times higher than that thin films formed with pure perovskite phase or pure pyrochlore phase. - Graphical abstract: The Bi-doped Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} (PST) thin films prepared by the sol-gel method showed a PST/Bi{sub 2}Ti{sub 2}O{sub 7} biphase structure for 0.2<x<0.4, and had the low dielectric capacitance and dielectric loss. Display Omitted

36 MATERIALS SCIENCE↗

Development and calibration of mirrors and gratings for the Soft X-ray materials science beamline at the Linac Coherent Light Source free-electron laser

This article discusses the development and calibration of the x-ray reflective and diffractive elements for the Soft X-ray Materials Science (SXR) beamline of the Linac Coherent Light Source (LCLS) free-electron laser (FEL), designed for operation in the 500 – 2000 eV region. The surface topography of three Si mirror substrates and two Si diffraction grating substrates was examined by atomic force microscopy (AFM) and optical profilometry. The figure of the mirror substrates was also verified via surface slope measurements with a long trace profiler. A boron carbide (B 4 C) coating especially optimized for the LCLS FEL conditions was deposited on all SXR mirrors and gratings. Coating thickness uniformity of 0.14 nm root mean square (rms) across clear apertures extending to 205 mm length was demonstrated for all elements, as required to preserve the coherent wavefront of the LCLS source. The reflective performance of the mirrors and the diffraction efficiency of the gratings were calibrated at beamline 6.3.2 at the Advanced Light Source synchrotron. To verify the integrity of the nanometer-scale grating structure, the grating topography was examined by AFM before and after coating. This is to our knowledge the first time B 4 C-coated diffraction gratings are demonstrated for operation in the soft x-ray region.

36 MATERIALS SCIENCE↗

Conduction mechanism of sputtered BaTiO{sub 3} film on Ni substrate

BaTiO{sub 3} (BTO) thin film capacitors were deposited on Ni substrate using rf magnetron sputtering. Microstructural studies by x-ray diffraction and transmission electron microscopy reveal that the as-grown BTO films have the columnar structure and the good interface structure. Postdeposition anneal results in the recrystallization of BTO films. The electrical measurements exhibit that the BTO films have high capacitance densities and low leakage currents.

36 MATERIALS SCIENCE↗

Materials and Electrical Characterization of Physical Vapor Deposited LaxLu1-xO3 Thin Films on 300 mm Silicon

La{sub x}Lu{sub 1-x}O{sub 3} thin films were deposited on 300 mm silicon wafers by physical vapor deposition and fabricated into field-effect transistors using a gate-first process flow. The films were characterized using transmission electron microscopy, Rutherford backscattering spectrometry, and synchrotron x-ray diffraction. The results show the films remain amorphous even at temperatures of 1000 C. The dielectric properties of La{sub x}Lu{sub 1-x}O{sub 3} (0.125 {<=} x {<=} 0.875) thin films were evaluated as a function of film composition. The amorphous La{sub x}Lu{sub 1-x}O{sub 3} thin films have a dielectric constant (K) of 23 across the composition range. The inversion thickness (T{sub inv}) of the La{sub x}Lu{sub 1-x}O{sub 3} thin films was scaled to <1.0 nm.

36 MATERIALS SCIENCE↗

Structural, microstructural and surface properties of a specific CeO{sub 2}-Bi{sub 2}O{sub 3} multiphase system obtained at 600 {sup o}C

Polycrystalline samples of (1-x) CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 {sup o}C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0{<=}x{<=}0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T' (or {beta}') and T (or {beta}) tetragonal phases, similar to the well-known {beta}' or {beta} Bi{sub 2}O{sub 3} metastable structural varieties, are observed. However, the crystal cell volumes of these {beta}' or {beta} Bi{sub 2}O{sub 3} phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH{sub 4} and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH{sub 4} and CO gases into the CO{sub 2} gas. The transformations of CH{sub 4} and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO{sub 2} absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH{sub 4} gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows. -- Graphical abstract: Catalytic efficiencies of CeO{sub 2}-Bi{sub 2}O{sub 3}system: catalytic actions on methane (on the left) or carbon monoxide (on the right) of (1-x)CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} samples, as a function of the fraction x, and for fixed temperatures: on the vertical axis, the intensities of CO{sub 2} FTIR absorption bands are reported. Strong efficiency of bismuth rich samples for CO conversion. Display Omitted Research highlights: {yields} Stabilization of metastable polymorph Bi{sub 2}O{sub 3} phases in the mix system [(1-x)CeO{sub 2}+(x/2)Bi{sub 2}O{sub 3}] at 600 {sup o}C. {yields} Solid gas interactions between this system and air-CO or air-CH{sub 4} gas flows at various temperatures and bismuth compositions. {yields} High efficiency of bismuth rich samples to convert CO into CO{sub 2}.

36 MATERIALS SCIENCE↗