Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Influence of Adsorption Site and Wavelength on the Photodesorption of NO from the (Fe,Cr) 3 O 4 (111) Mixed Oxide Surface

The photochemical properties of nitric oxide on a mixed oxide single crystal surface was examined in ultrahigh vacuum (UHV) using temperature programmed desorption (TPD), photon stimulated desorption (PSD) and low energy electron diffraction (LEED). The mixed oxide was a 75% Fe and 25% Cr corundum (0001) oxide film prepared on an α-Al2O3(0001) crystal, however its surface became terminated with a magnetite-like (111) structure after sputter/anneal cleaning, leading to a surface designated of (Fe,Cr)3O4(111). TPD of NO from the (Fe,Cr)3O4(111) surface revealed three chemisorbed states at 220, ~315 and 370 K assigned to NO binding at Fe3+, Cr3+ and Fe2+ sites, respectively. No significant thermal chemistry of NO was detected. NO photodesorption, the primary photochemical pathway in UHV, was sensitive to the adsorption site, with rates at the three adsorption sites following the trend: Fe3+ > Fe2+ > Cr3+. Multiexponential rate behavior seen in the overall NO PSD spectra was linked directly to site heterogeneity being manifested as a convolution of the individual NO photodesorption rates at the three types of surface sites. The photodesorption rate with UV light (365 nm) was ~10 times greater than that in the visible, but the per-photon rates across the visible spectrum (from 460 to 630 nm) were independent of the wavelength, which is suggestive of localized photon absorption at the adsorption site. Results in this study demonstrate that the adsorption site plays a critical role in determining photochemical rates on complex oxide surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multi-program national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

36 MATERIALS SCIENCE↗

Ferroelectric Self-Polarization Controlled Magnetic Stratification and Magnetic Coupling in Ultrathin La 0.67 Sr 0.33 MnO 3 Films

Multiferroic oxide heterostructures consisting of ferromagnetic and ferroelectric components hold the promise for nonvolatile magnetic control via ferroelectric polarization, advantageous for the low-dissipation spintronics. Modern understanding of the magnetoelectric coupling in these systems involves structural, orbital, and magnetic reconstructions at interfaces. Previous works have long proposed polarization-dependent interfacial magnetic structures; however, direct evidence is still missing, which requires advanced characterization tools with near-atomic-scale spatial resolutions. Here, extensive polarized neutron reflectometry (PNR) studies have determined the magnetic depth profiles of PbZr 0.2 Ti 0.8 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) bilayers with opposite self-polarizations. When the LSMO is 2–3 nm thick, the bilayers show two magnetic transitions on cooling. However, temperature-dependent magnetization is different below the lower-temperature transition for opposite polarizations. PNR finds that the LSMO splits into two magnetic sublayers, but the inter-sublayer magnetic couplings are of opposite signs for the two polarizations. Near-edge X-ray absorption spectroscopy further shows contrasts in both the Mn valences and the Mn–O bond anisotropy between the two polarizations. Finally, this work completes the puzzle for the magnetoelectric coupling model at the PZT/LSMO interface, showing a synergic interplay among multiple degrees of freedom toward emergent functionalities at complex oxide interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast and accurate calculation of EXAFS Debye-Waller factors in U⁢O2 using the dynamical matrix method

Theoretical modeling of bonding dynamics in metal oxides is required for predicting their thermal conductivity, catalytic activity, and mechanical properties. A primary challenge is the scarcity of experimental methods for validating theoretical predictions of these atomic-scale dynamics. This work presents a workflow that uses experimental extended x-ray absorption fine structure (EXAFS) data collected at high temperatures to validate an interatomic force field for uranium dioxide (UO2), an important model material. The validated force field is then used to drive computationally intensive molecular dynamics (MD) simulations and as input for the much faster dynamical matrix Debye-Waller (DMDW) method. The predicted values of the Debye-Waller factors from the DMDW calculations are in good agreement with those obtained from the MD simulations, with residual pair-specific differences attributable to quantum zero-point motion at low temperatures and lattice anharmonicity at high temperatures. We further show that theoretical EXAFS spectra constructed directly from DMDW-derived Debye-Waller factors reproduce the experimental data (at relatively low temperatures) with accuracy comparable to full MD-EXAFS, providing an additional validation of the choice of the potential. This study establishes a validated, rapid computational pathway for modeling bond dynamics, naturally incorporating quantum nuclear\\\\r\\\\nstatistics absent in classical simulations, which are essential for the mechanistic understanding of complex oxide materials.

58 GEOSCIENCES↗

Predicting Pulsed-Laser Deposition SrTiO 3 Homoepitaxy Growth Dynamics Using High-Speed Reflection High-Energy Electron Diffraction

Pulsed-laser deposition (PLD) is a powerful technique for growing complex oxides with controlled stoichiometry. To understand growth dynamics therein, it is common to leverage in situ spectroscopies, such as reflection high-energy electron diffraction (RHEED), to monitor surface crystallinity. Most commercial systems rely on video-rate cameras operating at 60-120 Hz that lack sufficient temporal resolution to capture growth dynamics at practical deposition frequencies. Here, a high-speed platform to record in situ dynamics via RHEED at >500 Hz is implemented. An open-source analysis package is designed to fit diffraction spots to 2D Gaussians, allowing single-pulse surface reconstruction kinetics extraction. Using homoepitaxially deposited (001)-oriented SrTiO 3 as a model system, we demonstrate how high-speed RHEED can provide real-time insight into growth processes obscured by slower acquisition systems. By fitting the single-pulse intensity to a set of exponential functions, we observe changes in the characteristic decay time and mechanism correlated to the substrate step width and surface termination. We observe distinct surface effects, with diffraction intensity decaying on lower-energy TiO 2 -terminated surfaces and stabilizing on SrO- or mixed-terminated surfaces. Similarly, using an exponential model, the extracted characteristic time of adatom deposition decreases with increased density of bonding sites associated with mixed termination and narrower step widths. Ultimately, this work shows how increasing RHEED temporal resolution can uncover new insights into growth processes, with practical implications for the design and control of PLD processes. This experimental platform provides new capabilities to enable data-driven machine learning analysis and autonomous control systems to enhance the complexity and fecundity of PLD.

(SrO)↗

Shape Effect Undermined by Surface Reconstruction: Ethanol Dehydrogenation over Shape-Controlled SrTiO 3 Nanocrystals

For this research, to gain an in-depth understanding of the surface properties relevant for catalysis using ternary oxides, we report the acid–base pair reactivity of shape-controlled SrTiO 3 (STO) nanocrystals for the dehydrogenation of ethanol. Cubes, truncated cubes, dodecahedra, and etched cubes of STO with varying ratios of (001) and (110) crystal facets were synthesized using a hydrothermal method. Low-energy ion scattering (LEIS) analysis revealed that the (001) surface on cubes of STO is enriched with SrO due to surface reconstruction, resulting in a high ratio of strong base sites. Chemical treatment with dilute nitric acid to form etched cubes of STO resulted in a surface enriched with Ti cations and strong acidity. Furthermore, the strength and distribution of surface acidic sites increase with the ratio of (110) facet from cubes to truncated cubes to dodecahedra for STO. Kinetic, isotopic, and spectroscopy methods show that the dehydrogenation of ethanol proceeds through the facile dissociation of the alcohol group, followed by the cleavage of the C α –H bond, which is the rate-determining step. Co-feeding of various probe molecules during catalysis, such as NH 3 , 2,6-di-tert-butylpyridine, CO 2 , and SO 2 , reveals that a pair of Lewis acid site and basic surface oxygen atom is involved in the dehydrogenation reaction. The surface density of acid–base site pairs was measured using acetic acid as a probe molecule, allowing initial acetaldehyde formation turnover rates to be obtained. Comparison among various catalysts reveals no simple correlation between ethanol turnover rate and the percentage of either surface facet ((001) or (110)) of the STO nanocrystals. Instead, the reaction rate is found to increase with the strength of acid sites but reversely with the strength of base sites. The acid–base property is directly related to the surface composition as a result from different surface reconstruction behaviors of the shaped STO nanocrystals. Lastly, the finding in this work underscores the importance of characterizing the top surface compositions and sites properties when assessing the catalytic performance of shape-controlled complex oxides such as perovskites.

(001) facet↗

La 0.6 Sr 0.4 CoO 3−δ Films Under Deoxygenation: Magnetic And Electronic Transitions Are Apart from The Structural Phase Transition

Abstract Topotactic phase transitions induced by changes in the oxygen vacancy concentration can largely alter the physical properties of complex oxides, including electronic and magnetic phases, while maintaining the structural integrity of the crystal lattice. An oxygen‐vacancy‐induced topotactic phase transition from perovskite (PV) to brownmillerite (BM) is achieved in epitaxial La 0.6 Sr 0.4 CoO 3−δ (LSCO) thin films. Two novel intermediate states with different oxygen content are identified by X‐ray diffraction, which involves a single‐phase reduced PV state and a mixed state of co‐existing PV and BM. The combination of depth‐sensitive polarized neutron reflectometry (PNR) and Rutherford backscattering (RBS) allows a quantitative determination of magnetization and the mean oxygen content in all states, revealing a continuous transition from La 0.6 Sr 0.4 CoO 2.97 to La 0.6 Sr 0.4 CoO 2.5 . BM formation is observed for an LSCO layer with an oxygen content of 2.67, while the magnetic and electronic transition already occurs for a layer with a higher oxygen content of 2.77 (and above) and in the absence of a BM signature. These results demonstrate that the physics of electronic metal‐to‐insulator transition (MIT), magnetic ferromagnet‐to‐non‐ferromagnet transition (FM‐to‐non‐FM), and structural PV‐to‐BM phase transition should be considered within the framework of separate but interrelated processes.

36 MATERIALS SCIENCE↗

Ionic‐Liquid‐Gating‐Induced Hydrogenation in Epitaxial Strontium Ferrite

Abstract Incorporating hydrogen into complex oxides holds promise for discovering exotic phenomena and novel functionalities by promoting couplings between ion and lattice/charge/spin/orbital degrees of freedom. Here, electrolyte gating‐driven hydrogenation is investigated in epitaxial brownmillerite SrFeO 2.5 thin films in which the hydrogenation‐induced lattice distortion is qualitatively different from its counterpart SrCoO 2.5 . The achievable lattice expansion in hydrogenated SrFeO 2.5 is weaker than in SrCoO 2.5 and primarily occurs along the normal of the stacked octahedral FeO 6 and tetrahedral FeO 4 layers. Upon the substitution of Fe with Co, the lattice expansion monotonically increases with increase of Co/Fe ratio, implying an intrinsic difference in accommodating hydrogen between Fe‐ and Co‐based brownmillerites. Moreover, a net magnetic moment in hydrogenated SrFeO 2.5 films is observed above room temperature, which gradually weakens with the increase of Co substitution, suggesting a stronger canted magnetism in Fe‐based hydrogenated brownmillerites. This work clarifies the electrolyte gating‐driven hydrogenation mechanisms in brownmillerite SrFeO 2.5 epitaxial thin films and those with Co substitution, particularly the deterministic role of Co/Fe ratio in the evolution of structure and properties upon hydrogenation.

Chemistry↗

Chemically Driven Nanoscopic Magnetic Phase Separation at the SrTiO(3)(001)/La(1-x)Sr(x)CoO(3) Interface

The degradation in magnetic properties in very thin film complex oxides is studied using SrTiO(3)(001)/La(1-x)Sr(x)CoO(3), providing unequivocal evidence for nanoscopic interfacial magnetic phase separation. Electron microscopy and spectroscopy reveal that this occurs due to inhomogeneity in local hole doping, driven by subtle, depthwise variations in the Sr and O stoichiometry. Simple thermodynamic and structural arguments for the origin of these variations are provided.

36 MATERIALS SCIENCE↗

Electron Doping by Charge Transfer at LaFeO 3 /Sm 2 CuO 4 Epitaxial Interfaces

The breakdown of the lattice translational invariance symmetry that occurs at complex oxide interfaces may profoundly modify their electronic structure, leading to interfacial states with properties drastically different from those of the superlattice individual components. The appearance of a conducting two dimensional (2D) electron gas at the interface between two insulating oxides and induced magnetism in a non-magnetic material are just two among many fascinating examples. [ 1 8 ] One of the key factors underlying novel properties is the modifi cation of the doping and orbital occupancy near those interfaces, which may result from charge transfer processes. [ 3 , 9 11 ] If materials used in heterostructures have different work functions, a non-equilibrium situation will be created at the interface and charge will be transferred until the chemical potential levels off. [ 12 ] The use of such phenomena to modify doping in heterostructures has been proposed theoretically as a new route to avoid the quenched disorder that inevitably accompanies the chemical doping. At the interface between a Mott insulating parent compound of the high critical temperature superconductor (HTSC) family and a suitable material that would act as the charge donor, electron doped phases could be stabilized which would eventually turn metallic and perhaps superconducting. [ 12 , 13 ] Such charge transfer processes have been observed at interfaces involving copper oxides such as La 0.7 Ca 0.3 MnO 3 / YBa 2 Cu 3 O 7 , [ 14 ] La 2 x Sr x CuO 4 /La 2 CuO 4 [ 15 ] and SrTi 1 x Nb x O 3 / Sm 2 CuO 4 . [ 16 ] While a novel 2D superconducting state was found at the La 2-x Sr x CuO 4 /La 2 CuO 4 interface, [ 17 ] the effect of doping by charge transfer could not be examined in the other two cases due to the detrimental effect on the YBa 2 Cu 3 O 7 superconductivity of the spin polarized electrons from La 0.7 Ca 0.3 MnO 3 in one case and due to the conducting nature of the SrTi 1 x Nb x O 3 in the other case, which obscures changes in the conducting properties of the interface layer. In this paper, the structural and

Bruno, Flavio Y.↗

Metal Thio- and Selenophosphates as Multifunctional van der Waals Layered Materials

Since the discovery of Dirac physics in graphene, research in 2D materials has exploded with the aim of finding new materials and harnessing their unique and tunable electronic and optical properties. The follow-on work on 2D dielectrics and semiconductors has led to the emergence and development of hexagonal boron nitride, black phosphorus, and transition metal disulfides. However, the spectrum of good insulating materials is still very narrow. Likewise, 2D materials exhibiting correlated phenomena such as superconductivity, magnetism, and ferroelectricity have yet to be developed or discovered. These properties will significantly enrich the spectrum of functional 2D materials, particularly in the case of high phase-transition temperatures. They will also advance a fascinating fundamental frontier of size and proximity effects on correlated ground states. In this work, a broad family of layered metal thio(seleno)phosphate materials that are moderate- to wide-bandgap semiconductors with incipient ionic conductivity and a host of ferroic properties are reviewed. It is argued that this material class has the potential to merge the sought-after properties of complex oxides with electronic functions of 2D and quasi-2D electronic materials, as well as to create new avenues for both applied and fundamental materials research in structural and magnetic correlations.

2D materials↗

Manipulate the Electronic and Magnetic States in NiCo 2 O 4 Films through Electric-Field-Induced Protonation at Elevated Temperature

Ionic-liquid-gating- (ILG-) induced proton evolution has emerged as a novel strategy to realize electron doping and manipulate the electronic and magnetic ground states in complex oxides. While the study of a wide range of systems (e.g., SrCoO 2.5 , VO 2 , WO 3 , etc.) has demonstrated important opportunities to incorporate protons through ILG, protonation remains a big challenge for many others. Furthermore, the mechanism of proton intercalation from the ionic liquid/solid interface to whole film has not yet been revealed. Here, with a model system of inverse spinel NiCo 2 O 4 , an increase in system temperature during ILG forms a single but effective method to efficiently achieve protonation. Moreover, the ILG induces a novel phase transformation in NiCo 2 O 4 from ferrimagnetic metallic into antiferromagnetic insulating with protonation at elevated temperatures. Finally, this study shows that environmental temperature is an efficient tuning knob to manipulate ILG-induced ionic evolution.

36 MATERIALS SCIENCE↗

Anomalous Defect Dependence of Thermal Conductivity in Epitaxial WO 3 Thin Films

Lattice defects typically reduce lattice thermal conductivity, which has been widely exploited in applications such as thermoelectric energy conversion. Here, an anomalous dependence of the lattice thermal conductivity on point defects is demonstrated in epitaxial WO 3 thin films. Depending on the substrate, the lattice of epitaxial WO 3 expands or contracts as protons are intercalated by electrolyte gating or oxygen vacancies are introduced by adjusting growth conditions. Surprisingly, the observed lattice volume, instead of the defect concentration, plays the dominant role in determining the thermal conductivity. In particular, the thermal conductivity increases significantly with proton intercalation, which is contrary to the expectation that point defects typically lower the lattice thermal conductivity. The thermal conductivity can be dynamically varied by a factor of ≈1.7 via electrolyte gating, and tuned over a larger range, from 7.8 to 1.1 W m -1 K -1 , by adjusting the oxygen pressure during film growth. The electrolyte-gating-induced changes in thermal conductivity and lattice dimensions are reversible through multiple cycles. These findings not only expand the basic understanding of thermal transport in complex oxides, but also provide a path to dynamically control the thermal conductivity.

36 MATERIALS SCIENCE↗

Comprehensive Electrical Control of Metamagnetic Transition of a Quasi-2D Antiferromagnet by In Situ Anisotropic Strain

Effective nonmagnetic control of the spin structure is at the forefront of the study for functional quantum materials. This study demonstrates that, by applying an anisotropic strain up to only 0.05%, the metamagnetic transition field of spin–orbit-coupled Mott insulator Sr 2 IrO 4 can be in situ modulated by almost 300%. Simultaneous measurements of resonant X-ray scattering and transport reveal that this drastic response originates from the complete strain-tuning of the transition between the spin-flop and spin-flip limits, and is always accompanied by large elastoconductance and magnetoconductance. This enables electrically controllable and electronically detectable metamagnetic switching, despite the antiferromagnetic insulating state. The obtained strain-magnetic field phase diagram reveals that C 4 -symmetry-breaking anisotropy is introduced by strain via pseudospin-lattice coupling, directly demonstrating the pseudo-Jahn–Teller effect of spin–orbit-coupled complex oxides. The extracted coupling strength is much weaker than the superexchange interactions, yet crucial for the spontaneous symmetry-breaking, affording the remarkably efficient strain-control.

36 MATERIALS SCIENCE↗

Oxygen Vacancy Injection as a Pathway to Enhancing Electromechanical Response in Ferroelectrics

Since their discovery in late 1940s, perovskite ferroelectric materials have become one of the central objects of condensed matter physics and materials science due to the broad spectrum of functional behaviors they exhibit, including electro-optical phenomena and strong electromechanical coupling. In such disordered materials, the static properties of defects such as oxygen vacancies are well explored but the dynamic effects are less understood. In this work, the first observation of enhanced electromechanical response in BaTiO3 thin films is reported driven via dynamic local oxygen vacancy control in piezoresponse force microscopy (PFM). A persistence in peizoelectricity past the bulk Curie temperature and an enhanced electromechanical response due to a created internal electric field that further enhances the intrinsic electrostriction are explicitly demonstrated. The findings are supported by a series of temperature dependent band excitation PFM in ultrahigh vacuum and a combination of modeling techniques including finite element modeling, reactive force field, and density functional theory. Furthermore, this study shows the pivotal role that dynamics of vacancies in complex oxides can play in determining functional properties and thus provides a new route toward– achieving enhanced ferroic response with higher functional temperature windows in ferroelectrics and other ferroic materials.

36 MATERIALS SCIENCE↗

Colossal Strain Tuning of Ferroelectric Transitions in KNbO 3 Thin Films

Strong coupling between polarization ( P ) and strain (ɛ) in ferroelectric complex oxides offers unique opportunities to dramatically tune their properties. Here colossal strain tuning of ferroelectricity in epitaxial KNbO 3 thin films grown by sub‐oxide molecular beam epitaxy is demonstrated. While bulk KNbO 3 exhibits three ferroelectric transitions and a Curie temperature ( T c ) of ≈676 K, phase‐field modeling predicts that a biaxial strain of as little as −0.6% pushes its T c > 975 K, its decomposition temperature in air, and for −1.4% strain, to T c > 1325 K, its melting point. Furthermore, a strain of −1.5% can stabilize a single phase throughout the entire temperature range of its stability. A combination of temperature‐dependent second harmonic generation measurements, synchrotron‐based X‐ray reciprocal space mapping, ferroelectric measurements, and transmission electron microscopy reveal a single tetragonal phase from 10 K to 975 K, an enhancement of ≈46% in the tetragonal phase remanent polarization ( P r ), and a ≈200% enhancement in its optical second harmonic generation coefficients over bulk values. These properties in a lead‐free system, but with properties comparable or superior to lead‐based systems, make it an attractive candidate for applications ranging from high‐temperature ferroelectric memory to cryogenic temperature quantum computing.

36 MATERIALS SCIENCE↗

The Dynamics of Oxygen Ion Exchange in Epitaxial Strontium Cobaltite Bilayers

Abstract The exchange of ions across interfaces is key to the field of iontronics, where the properties of the device can be altered by the local ion concentration. This study investigates a complex oxide system where structural and electronic phase transitions can be driven by changes in the concentration of oxygen ions. In situ coherent X‐ray studies are conducted on epitaxial bilayers of insulating SrCoO 2.5 and metallic SrCoO 3 − δ . The diffusion of oxygen ions across the bilayer is studied with X‐ray photon correlation spectroscopy to capture the dynamical behavior of the interface in reducing and oxidizing environments. The behavior is strongly asymmetric, with much slower dynamics appearing in reducing versus oxidizing environments. According to the correlation functions determined from different points in reciprocal space, this study finds that the dynamics near the center of the SrCoO 2.5 crystal are generally similar to those near the heterointerfaces. The results suggest that the interface is stable and reversible, making SrCoO x a model system for the study of iontronic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric Field–Controlled Multistep Proton Evolution in H x SrCoO 2.5 with Formation of H–H Dimer

Ionic evolution–induced phase transformation can lead to wide ranges of novel material functionalities with promising applications. Here, using the gating voltage during ionic liquid gating as a tuning knob, the brownmillerite SrCoO2.5 is transformed into a series of protonated HxSrCoO2.5 phases with distinct hydrogen contents. The unexpected electron to charge-neutral doping crossover along with the increase of proton concentration from x = 1 to 2 suggests the formation of exotic charge neutral H–H dimers for higher proton concentration, which is directly visualized at the vacant tetrahedron by scanning transmission electron microscopy and then further supported by first principles calculations. Although the H–H dimers cause no change of the valency of Co2+ ions, they result in clear enhancement of electronic bandgap and suppression of magnetization through lattice expansion. These results not only reveal a hydrogen chemical state beyond anion and cation within the complex oxides, but also suggest an effective pathway to design functional materials through tunable ionic evolution.

36 MATERIALS SCIENCE↗