SEARCH · Search NASA

Results for “components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Two-component Fermi-liquid theory - Equilibrium properties of liquid metallic hydrogen

It is reported that the transition of condensed hydrogen from an insulating molecular crystal phase to a metallic liquid phase, at zero temperature and high pressure, appears possible. Liquid metallic hydrogen (LMH), comprising interpenetrating proton and electron fluids, would constitute a two-component Fermi liquid with both a very high component-mass ratio and long-range, species-dependent bare interactions. The low-temperature equilibrium properties of LMH are examined by means of a generalization to the case of two components of the phenomenological Landau Fermi-liquid theory, and the low-temperature specific heat, compressibility, thermal expansion coefficient and spin susceptibility are given. It is found that the specific heat and the thermal expansion coefficient are vastly greater in the liquid than in the corresponding solid, due to the presence of proton quasiparticle excitations in the liquid.

Oliva, J.↗

NASA NTRS1982

A new interstellar component in the spectrum of HD 72127A

New high dispersion observations are reported of the very strong, broad interstellar K line of Ca II in the spectrum of HD 72127A, a star located near a filament of the Vela supernova remnant. When compared with similar observations made in 1977, the new data reveal temporal variability of the interstellar absorption, as shown both by the presence of a new, sixth line component and by a 25% increase in the total equivalent width of the K line. All five Ca II components which were seen in both years show very large column-density ratios N(Ca II) /N(Na I) at least equal to 9, probably arising from anomalously large interstellar gas-phase abundances of Ca caused by disruption of interstellar grains. Marked differences in the structure of the K line between the two early-type components of this binary star, which are separated by only 3000 AU, are confirmed.

Hobbs, L. M.↗

NASA NTRS1982

Apollo 11 breccias and soils - Aluminous mare basalts or multi-component mixtures

This paper examines the chemistry of Apollo 11 welded breccias and soils and attempts to ascertain whether the compositional variations in these samples reflect the comminuted remains of an unsampled high alumina basalt, or whether they result from mixing of mare basalts with more aluminous highland components. The data show strong linear compositional trends that are not consistent with magmatic processes. Instead, they indicate two-component mixing involving high-K basalt and an already well-mixed soil component. This is consistent with impact mixing of soil with a high-K mare basalt unit that is stratigraphically above other mare basalt units.

Rhodes, J. M.↗

NASA NTRS1982

The response of Galileo aft cover components to laser radiation

The aft region of the Galileo probe will be subjected to severe heat transfer rates dominated by the radiation contributions. To assess the response of several vehicle aft region components to thermal radiation, tests employing a 10 KW CO2 laser were conducted. The experiments evaluated the annulus/aft cover interface, the umbilical feedthrough assembly and the mortar cover seal assembly. Experimental evidence of the response of the phenolic nylon heatshield and quantitative measures of its effect on gap geometries of several vehicle components were acquired. In addition, qualitative measures of the survivability of the irradiated components were obtained.

Metzger, J. W.↗

NASA NTRS1982

Net shape fabrication of Alpha Silicon Carbide turbine components

Development of Alpha Silicon Carbide components by net shape fabrication techniques has continued in conjunction with several turbine engine programs. Progress in injection molding of simple parts has been extended to much larger components. Turbine rotors fabricated by a one piece molding have been successfully spin tested above design speeds. Static components weighing up to 4.5 kg and 33 cc in diameter have also been produced using this technique. Use of sintering fixtures significantly improves dimensional control. A new Si-SiC composite material has also been developed with average strengths up to 1000 MPa (150 ksi) at 1200 C.

Storm, R. S.↗

NASA NTRS1982

DE-1 observations of the polar wind - A heated and an unheated component

High altitude observations made by DE-1 in the polar regions indicate that the polar wind consists of both a heated and an unheated component. The unheated component constitutes what may be called the 'classical polar wind' while the heated component is thought to be the result of the interaction of the primal polar wind with regions of ion perpendicular heating. The altitude at which the heating occurs is estimated to lie between 8000 and 12000 km.

Gurgiolo, C.↗

NASA NTRS1982

The early-type component in v1 Sagittarii

Four low-resolution UV spectra of v1 Sgr (cK2) were obtained with the IUE satellite to investigate the nature of the hot component in this object, which was detected in the Astronomical Netherlands Satellite UV photometric data. The IUE results show that the spectral energy distribution of v1 Sgr in the FUV is comparable to that of a B9 star. FUV flux level, when compared with that of the mid-ultraviolet flux level, indicates that the luminosity of the hot component is roughly equivalent to that of a main-sequence star, assuming that the mid-ultraviolet flux is dominated almost entirely by a K2 I object. No discernible spectral features are present in the FUV, contrary to what may be expected in a star of B9 spectral type. Two possible interpretations are suggested: the hot component is a rapidly rotating star, or an accretion disk surrounding a central object which could be a collapsed star is being observed.

Kondo, Y.↗

NASA NTRS1982

Two-component proton spectra in the inner Saturnian magnetosphere

Measurements obtained by the Pioneer-11 spacecraft in Saturn's inner magnetosphere revealed the presence of a high energy proton component, primarily confined within the orbits of satellites Enceladus and Mimas. The high energy component was interpreted as due to protons from cosmic ray neutron albedo decay interactions with the Saturnian rings and, secondarily, the planetary atmosphere, but without detailed knowledge of the differential or integral spectrum. The main objective of the present investigation is to examine in some detail the ion spectra in the considered region of the magnetosphere, and to provide some of the basic input necessary in evaluating various models of energetic particle-ring interactions. The conducted measurements clearly show the presence of low energy ions and electrons inside the orbit of Mimas and provide a measure of the evolution of the hot ion spectrum observed inside the orbit of Rhea into a two-component power law spectrum inside the orbits of Enceladus and Mimas.

Krimigis, S. M.↗

NASA NTRS1982

Flight service evaluation of composite helicopter components

This first interim report presents the technical background for including environmental effects in the design of helicopter composite structures, and test results after approximately two year field exposure of components and panels. Composite structural components were removed from Sikorsky S-76 helicopters commercially operated in the Gulf Coast region of Louisiana. Fatigue tests were conducted for a graphite/epoxy tail rotor spar and static test for a graphite/epoxy and Kevlar/epoxy stabilizer. Graphite/epoxy and Kevlar/epoxy panels are being exposed to the outdoor environment in Stratford, Connecticut and West Palm Beach, Florida. For this reporting period the two year panels were returned, moisture measurements taken, and strength tests conducted. Results are compared with initial type certificate strengths for components and with initial laboratory coupon tests for the exposed panels. Comparisons are also presented with predicted and measured moisture contents.

Rich, M. J.↗

NASA NTRS1982

Failure characteristics of graphite-epoxy structural components loaded in compression

Failure characteristics of compressively loaded graphite-epoxy components are described. Experimental results for both strength-critical laminates and structural components with postbuckling strength are presented. Effects of low speed impact damage and circular holes on compressive strength are discussed. Delamination and shear crippling failure mechanisms that limit the performance of strength-critical laminates are described. Transverse shear and skin-stiffener separation failure mechanisms that limit the performance of components with postbuckling strength are also described. The influence of matrix properties on compressive strength improvements for impact damaged laminates is discussed. Experimental data and results from a failure analysis for strength-critical laminates with cutouts are discussed and compared with impact damage results. Typical postbuckling test results are compared with analytical predictions.

Starnes, J. H., Jr.↗

NASA NTRS1983

Design procedures for fiber composite structural components: Rods, columns and beam columns

Step by step procedures are described which are used to design structural components (rods, columns, and beam columns) subjected to steady state mechanical loads and hydrothermal environments. Illustrative examples are presented for structural components designed for static tensile and compressive loads, and fatigue as well as for moisture and temperature effects. Each example is set up as a sample design illustrating the detailed steps that are used to design similar components.

Chamis, C. C.↗

NASA NTRS1982

Principal Components as a Data Reduction and Noise Reduction Technique

The potential of principal components as a pipeline data reduction technique for thematic mapper data was assessed and principal components analysis and its transformation as a noise reduction technique was examined. Two primary factors were considered: (1) how might data reduction and noise reduction using the principal components transformation affect the extraction of accurate spectral classifications; and (2) what are the real savings in terms of computer processing and storage costs of using reduced data over the full 7-band TM complement. An area in central Pennsylvania was chosen for a study area. The image data for the project were collected using the Earth Resources Laboratory's thematic mapper simulator (TMS) instrument.

Imhoff, M. L.↗

NASA NTRS1982

The Use of Principal Components for Creating Improved Imagery for Geometric Control Point Selection

A directed principal component (PC) analysis and its transformation was applied to 7-channel thematic mapper simulator (TMS) data and 4-channel LANDSAT multispectral scanner system (MSS) data collected over the city of Lancaster, Pennsylvania, to create improved imagery for geometric control point selection for image to image registration. Nineteen temporally stable geometric control points, such as road interactions and bridges, were selected for a 236 sq km area. The control points were visible on both the TMS and MSS imagery. On the first attempt the corresponding image control points were selected on both data sets without using the principal components transformation. Many of the road intersection locations were visible but the actual road crossings could not be distinguished. As a result, mensuration errors using raw data exceeded the equivalent of two (79 x 79 m) pixels. The application of a guided principal components transformation yielded TMS and MSS single band images showing improved detail in the scene's urban and residential infrastructure. The PC transformed data sets were then utilized for the reselection of geometric control points. By shown greater detail, control points on both the TMS and MSS imagery could be located with greater precision using the PC transformed data.

Imhoff, M. L.↗

NASA NTRS1981

Energy efficient engine low-pressure compressor component test hardware detailed design report

The aerodynamic and mechanical design description of the low pressure compressor component of the Energy Efficient Engine were used. The component was designed to meet the requirements of the Flight Propulsion System while maintaining a low cost approach in providing a low pressure compressor design for the Integrated Core/Low Spool test required in the Energy Efficient Engine Program. The resulting low pressure compressor component design meets or exceeds all design goals with the exception of surge margin. In addition, the expense of hardware fabrication for the Integrated Core/Low Spool test has been minimized through the use of existing minor part hardware.

Michael, C. J.↗

NASA NTRS1983

Constitutive Equations for Use in Design Analyses of Long-life Elevated Temperature Components

Design analysis needs and procedures relative to elevated temperature components in liquid metal fast breeder reactor (LMFBR) system were examined. The effects of the thermal transients on the pressure boundary components are enhanced by the excellent heat transfer properties of the liquid sodium coolant. Design criteria for high temperature nuclear reactor components recognize the potential occurrence of inelastic structural response. Specifically, criteria and limits were developed which reflect a recognition of this potential and employ design by analysis concepts that requires that inelastic (elastic-plastic and creep) analyses be performed. Constitutive equations to represent multiaxial time-dependent responses of LMFBR alloys are established. The development of equations applicable under cyclic loading conditions are outlined.

Pugh, C. E.↗

NASA NTRS1983

Survey of usage of technical report components to establish their most effective organization

A survey of engineers and scientists at NASA's Langley Research Center (LaRC) and in the academic/industrial communities was conducted to determine the opinions of readers concerning the format (organization) of NASA technical reports and usage of technical report components. A survey questionnaire was sent to 513 LaRC engineers and scientists and 600 engineers and scientists from three (3) professional/technical societies. The survey response rates were 74 percent and 85 percent, respectively. The questionnaire contained 14 questions covering 12 survey topics. The results of two of these survey topics - the order in which users read components (Survey Topic 1) and the components reviewed or read to determine whether to read the entire report (Survey Topic 2) - are presented in this paper.

Pinelli, T. E.↗

NASA NTRS1983

Influence of airplane components on rotational aerodynamic data for a typical single-engine airplane

The influence of airplane components, as well as wing location and tail length, on the rotational flow aerodynamics is discussed for a 1/6-scale general aviation airplane model. Examination of the individual component effects provides insight as to the source of the moment and forces that determine spin characteristics. For the subject airplane, it is seen that the presence of the horizontal tail adversely effects the yaw damping of the vertical tail such that at certain angles of attack the vertical actually becomes a propelling component in spinning motion. It is shown that the level of this adverse interaction is a function of the relative positions of the wing and the tail surfaces, e.g., relocating the wing to the high wing position or shortening the tail moment arm from the basic configuration both reduced or eliminated the adverse tail interference for certain angles of attack. The influence of wing location on the damping characteristics of the horizontal-vertical tail combination would not be addressed in any existing tail design criterion for spinning and could only be discerned through rotary balance testing.

Ralson, J.↗

NASA NTRS1984

High voltage-high power components for large space power distribution systems

Space power components including a family of bipolar power switching transistors, fast switching power diodes, heat pipe cooled high frequency transformers and inductors, high frequency conduction cooled transformers, high power-high frequency capacitors, remote power controllers and rotary power transfer devices were developed. Many of these components such as the power switching transistors, power diodes and the high frequency capacitor are commercially available. All the other components were developed to the prototype level. The dc/dc series resonant converters were built to the 25 kW level.

Renz, D. D.↗