SEARCH · Search NASA

Results for “correlation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS2001

Traveling-Wave Tube Amplifier Model to Predict High-Order Modulation Intersymbol Interference

Demands for increased data rates in satellite communications necessitate higher order modulation schemes, larger system bandwidth, and minimum distortion of the modulated signal as it is passed through the traveling wave tube amplifier (TWTA). One type of distortion that the TWTA contributes to is intersymbol interference (ISI), and this becomes particularly disruptive with wide-band, complex modulation schemes. It is suspected that in addition to the dispersion of the TWT, frequency dependent reflections due to mismatches within the TWT are a significant contributor to ISI. To experimentally investigate the effect of these mismatches within the physical TWT on ISI would be prohibitively expensive, as it would require manufacturing numerous amplifiers in addition to the acquisition of the required digital hardware. In an attempt to develop a more accurate model to correlate IS1 with the TWTA and the operational signal, a fully three-dimensional (3D), time-dependent, TWT interaction model has been developed using the electromagnetic particle-in-cell (PIC) code MAFIA (solution of Maxwell's equations by the Finite-Integration-Algorithm). The model includes a user defined slow-wave circuit with a spatially tapered region of loss to implement a sever, and spatially varied geometry (such as helical pitch) to implement a phase velocity taper. The model also includes user defined input/output coupling and an electron beam contained by solenoidal, electrostatic, or periodic permanent magnet (PPM) focusing allowing standard or novel TWTs to be investigated. This model comprehensively takes into account the effects of frequency dependent nonlinear distortions (MAM and AMPM); gain ripple due to frequency dependent reflections at the input/output coupling, severs, and mismatches from dynamic pitch variations; drive induced oscillations; harmonic generation; intermodulation products; and backward waves.

Kory, Carol L.↗

NASA NTRS2012

Advanced Stirling Radioisotope Generator Thermal Power Model in Thermal Desktop SINDA/FLUINT Analyzer

This paper presents a three-dimensional Advanced Stirling Radioisotope Generator (ASRG) thermal power model that was built using the Thermal Desktop SINDA/FLUINT thermal analyzer. The model was correlated with ASRG engineering unit (EU) test data and ASRG flight unit predictions from Lockheed Martin's Ideas TMG thermal model. ASRG performance under (1) ASC hot-end temperatures, (2) ambient temperatures, and (3) years of mission for the general purpose heat source fuel decay was predicted using this model for the flight unit. The results were compared with those reported by Lockheed Martin and showed good agreement. In addition, the model was used to study the performance of the ASRG flight unit for operations on the ground and on the surface of Titan, and the concept of using gold film to reduce thermal loss through insulation was investigated.

Wang, Xiao-Yen↗

NASA NTRS2023

Hybrid CFD Engineering Model of Plume Induced Erosion and Crater Formation During Descent of Lunar Landers

With rapidly increased worldwide interest in landing on the moon, the issue of Plume Surface Interactions (PSI) is gaining attention. Hazards posed by lander plume induced dust and debris, as well as landing site deformation can be mitigated when better understood through predictive simulations. As simulation enabling computational power continues to increase, hybrid Computational Fluid Dynamics (CFD)/Engineering models provide the immediate ability to conduct parametric/trade studies driving design decisions for landers. Reduced order erosion engineering models apply correlations of the surface erosion rate to the plume induced surface forces with the correlations anchored to flight observations from Apollo LM landings. The MSFC propulsion fluid dynamics branch has developed such a hybrid model for predicting the plume induced viscous erosive regression of the Lunar surface beneath a landing vehicle. The (Descent Interpolated Gas Granular Erosion Model) DIGGEM was originally implemented as a post processing tool to calculate induced erosion rates through vehicle descent using CFD solutions of the vehicle plume at several fixed altitudes. This capability has since been advanced in the Loci/Chem-DIGGEM model to allow transient, moving vehicle, fully coupled viscous erosion modeling of vehicle descent PSI. This model has recently been used to make preflight predictions of the erosive regression of the ground beneath a Commercial Lunar Payload Services (CLPS) vehicle in support of measurements to be made by the Stereo Cameras for Lunar Plume Surface Studies (SCALPSS) instrument.

Plume Surface Interaction↗

NASA NTRS2023

Hybrid CFD Engineering Model of Plume Induced Erosion and Crater Formation During Descent of Lunar Landers

Plume Surface Interaction↗

NASA NTRS1984

Hoop/column antenna RF verification model. Volume 2: Analysis and correlation

As part of the Large Space System Technology Program, the theoretical and experimental results of the RF characteristic of a hoop/column, quad aperture antenna using an RF verification model are presented. To satisfy the primary purposes of the model, experimental pattern data is provided for the quad aperture configuration at different reflector edge illumination levels, from which the geometry and edge effects can be assessed, and experimental data which can be compared with calculations using various theoretical reflector scattering formulae are provided. It also experimentally determines the effects upon secondary patterns of scale model quartz cables, as used in the hoop/column design, upon secondary patterns in order to assess the importance of developing a scattering theory to predict such effects. In addition, a comprehensive theoretical study and the experimental pattern results of quad aperture antenna feeds, a discussion of the fundamental affect of parasitic side lobes, their amplitude, and location in space.

Croswell, W. F.↗

NASA NTRS1996

Quantifying the Correlation Between Eye-Movement and Perceptual Responses to Moving Plaids

To determine the extent to which the pursuit eye-movement and perceptual systems share a common neural motion-processing pathway, we simultaneously measure the psychophysical and eye-movement responses to drifting plaids in a direction-discrimination task. Correlation between the noise in the eye movements and percepts would suggest a shared neural substrate. Three observers were asked to track a plaid (Type I 90 deg; TF = 4 Hz, SF = 0.6 c/d; direction = -2, 0, or 2 deg), and to respond whether the motion was to the right or left of vertical. The eye-movement direction is computed from the initial 300 ms of saccade-free tracking (near open-loop). On each trial, we use the eye-movement direction to predict the perceptual response. We then compute the probability of successfully predicting the observer's response. We also use SOC analysis as an alternate measure of the correlation. We compare the data from both these analyses to the predictions of two models in which the eye movements and the percept are driven by either a common noisy signal (correlated model) or by two separate noisy signals (uncorrelated model). We also allow for the fact that our measured eye movements are degraded by eye-tracker noise. This noise causes our measured correlation to be lower than the actual biological correlation. The correlations in our data are higher than those predicted by the uncorrelated model, and are similar to the predictions of the correlated model. The proportion of perceptual responses correctly predicted by the eye movements were 0.66, 0.60, 0.73 for the -2, 0, 2 deg stimuli respectively (correlated model 0.65, 0.60, 0.70; uncorrelated model 0.58, 0.51, 0.60).The SOC proportions were 0.71, 0.64, 0.72 (correlated model 0.66, 0.64, 0.69; uncorrelated model 0.5, 0.5, 0.5). These results show that the oculomotor and perceptual system share a performance-limiting noise source and provide strong evidence that a common neural mechanism (perhaps MT or MST) drives both perception and smooth eye movements.

Beutter, Brent R.↗

NASA NTRS1972

Basic failure mechanisms in advanced composites

Failure mechanisms in carbon-epoxy composites are identified as a basis for more reliable prediction of the performance of these materials. The approach involves both the study of local fracture events in model specimens containing small groups of filaments and fractographic examination of high fiber content engineering composites. Emphasis is placed on the correlation of model specimen observations with gross fracture modes. The effects of fiber surface treatment, resin modification and fiber content are studied and acoustic emission methods are applied. Some effort is devoted to analysis of the failure process in composite/metal specimens.

Mullin, J. V.↗

NASA NTRS1987

AH-64A shake test and correlation with NASTRAN finite element model predictions

A NASTRAN FEM code for the AH-64A helicopter airframe has been evaluated in light of suspended-fuselage shake tests that determined this aircraft's frequency-response characteristics at numerous measurement locations throughout the structure. Natural frequencies and mode shapes have been estimated from frequency-response data. On the basis of the correlation study results obtained, several modifications were made to the FEM model, yielding significant performance improvements.

Toossi, Mostafa↗

DOE OSTI2026

Continuum Correlations from CFD-DEM Modeling of Conduction Heat Transfer in Granular Flows

Heat transfer between a surface and flowing particles is analyzed to improve the accuracy of continuum models for wall-to-bed heat transfer in a fluidized bed. Discrete element modeling (DEM) is used to model a fluidized bed heat exchanger where heat enters the system through a heated wall. The DEM heat transfer predictions are validated against published experimental work (Brewster et al., 2024) with less than 15% error. In previous work by Morris et al. (2015), a continuum model was developed using data from high-fidelity DEM simulations of chute flows. In the current study, the continuum model is extended and validated for fluidized beds. The sensitivity of the continuum heat transfer model parameters, which was not quantified in previous studies, is also investigated. It is observed that for a given particle with specific properties, e.g. the particle size, roughness, and conduction lens radius, the continuum correlation developed for heat transfer from a heated boundary to the particle bed depends mainly on the solid fraction or porosity of the particle bed for a given fluid. The new continuum heat transfer model is then validated over a wide range of superficial velocities via comparisons to both discrete element and experimental data. It is shown that this correlation is valid for a large range of particle flow conditions from chute flows to fluidized beds with less than 10% error as compared to DEM predictions.

14 SOLAR ENERGY↗

NASA NTRS1987

Ground and air resonance of bearingless rotors in hover

A finite element formulation is used to investigate ground and air resistence in hover for a bearingless rotor. Aerodynamic forces are studied using quasi-steady strip theory, and unsteady aerodynamic effects are introduced through an inflow dynamics model. Reasonable correlation was found between predicted ground and air resonance results and data obtained from measurements using a 1/8th Froude-scaled dynamic model. Systematic parametric studies of the effects of various design parameters were performed, and lag frequency was found to significantly influence ground resonance stability, whereas pitch-lag coupling, blade sweep and pitch link stiffness had powerful effects on air resonance stability.

Jang, Jinseok↗

NASA NTRS2007

A Semi-Analytical Method for Determining the Energy Release Rate of Cracks in Adhesively-Bonded Single-Lap Composite Joints

A semi-analytical method for determining the strain energy release rate due to a prescribed interface crack in an adhesively-bonded, single-lap composite joint subjected to axial tension is presented. The field equations in terms of displacements within the joint are formulated by using first-order shear deformable, laminated plate theory together with kinematic relations and force equilibrium conditions. The stress distributions for the adherends and adhesive are determined after the appropriate boundary and loading conditions are applied and the equations for the field displacements are solved. Based on the adhesive stress distributions, the forces at the crack tip are obtained and the strain energy release rate of the crack is determined by using the virtual crack closure technique (VCCT). Additionally, the test specimen geometry from both the ASTM D3165 and D1002 test standards are utilized during the derivation of the field equations in order to correlate analytical models with future test results. The system of second-order differential field equations is solved to provide the adherend and adhesive stress response using the symbolic computation tool, Maple 9. Finite element analyses using J-integral as well as VCCT were performed to verify the developed analytical model. The finite element analyses were conducted using the commercial finite element analysis software ABAQUS. The results determined using the analytical method correlated well with the results from the finite element analyses.

Yang, Charles↗

NASA NTRS1991

A description of the correlated k distributed method for modeling nongray gaseous absorption, thermal emission, and multiple scattering in vertically inhomogeneous atmospheres

A radiative transfer method for treating nongray gaseous absorption and thermal emission in vertically inhomogeneous multiple scattering atmospheres is described. Probability density distributions of absorption coefficient strength are derived from line-by-line calculations to construct line-by-line and band model based k distributions. The monotonic ordering of absorption coefficient strengths in these k distributions implicitly preserves the monochromatic structure of the atmosphere at different pressure levels, thus simulating monochromatic spectral integration at a fraction of the line-by-line computing cost. The k distribution approach also permits accurate modeling of overlapping absorption by different atmospheric gases and accurate treatment of nongray absorption in multiple scattering media. It is shown that the correlated k distribution method is capable of achieving numerical accuracy to within 1 percent of cooling rates obtained with line-by-line calculations throughout the troposphere and most of the stratosphere.

Lacis, Andrew A.↗

NASA NTRS1987

SINDA-NASTRAN interfacing program theoretical description and user's manual

The task of converting SINDA finite difference thermal model temperature results into NASTRAN finite element model thermal loads can be very labor intensive if there is not one node-to-one element, or systematic node-to-element. correlation between models. This paper describes the SINDA-NASTRAN Interfacing Program (SNIP), a FORTRAN computer code that generates NASTRAN structural model thermal load cards given by SINDA (or similar thermal model) temperature results and thermal model geometric data. SNIP generates NASTRAN thermal load cards for NASTRAN plate, shell, bar, and beam elements. The paper describes the interfacing procedures used by SNIP, and discusses set-up and operation of the program. Sample cases are included to demonstrate use of the program and show its performance under a variety of conditions. SNIP can provide structural model thermal loads that accurately reflect thermal model results while reducing the time required to interface thermal and structural models when compared to other methods.

Winegar, Steven R.↗

NASA NTRSDate not supplied

A Liquefaction Model for A Cryogenically Refrigerated Ellipsoidal Tank

Over the past few decades NASA has been developing technology to produce cryogenic propellants on the surfaces of the Moon or Mars. In-situ propellant production reduces the amount of propellants needed to be taken to Moon/Mars and ultimately reduces mission cost. Utilizing Lunar/Martian resources, the produced gases are liquefied and stored prior to use on the ascent vehicle. This paper presents a model for the liquefaction process of gaseous propellants in a cryogenically refrigerated tank. The tank is cylindrical with elliptical top and bottom domes. A transient model is developed based on the mass and energy conservation principles and wall-gas and liquid-gas interfacial mass and heat transfer correlations. The model is incorporated into the Generalized Fluid System Simulation Program (GFSSP), an MSFC in-house general-purpose computer program for flow network analysis. Description of the model and comparison of predicted results with available test data is presented.

Liquefaction↗

NASA NTRS1994

Active Members to Establish On-Orbit Modal Data for Modal Correlation

The paper presents an approach to experimentally determine the modal sensitivity derivitives with respect to physical parameters of a structure in space or on the ground. The information experimentally validates the Jacobian used to update the analytical model to correlate with the experimental modal data. The approach is applicable to Adaptive Structures and utilizes active members. For verification of the approach, numerical simulations of a 4.5 meter diameter truss structure and experimental verification plan and progress are presented.

space structures modal analysis dynamic models ada↗

NASA NTRS1988

Parameter identification methods for improving structural dynamic models

There is an increasing need to develop Parameter Identification methods for improving structural dynamic models, based on the inability of engineers to produce mathematical models which correlate with experimental data. This research explores the efficiency of combining Component Mode Synthesis (substructuring) methods with Parameter Identification procedures in order to improve analytical modeling of structural components and their connections. Improvements are computed in terms of physical stiffness and damping parameters in order that the physical characteristics of the model can be better understood. Connections involving both viscous and friction damping are investigated. Substructuring methods are utilized to reduce the complexity of the identification problem. Component and inter-component structural connection properties are evaluated and identified independently, thus simplifying the identification problem. It is shown that modal test data is effective for identifying modeling problems associated with structural components, and for determining the stiffness and damping properties of intercomponent connections. In general, Parameter Identification is improved when greater quantities of experimental data are available.

Lawrence, Charles↗

NASA NTRS1997

Contemporaneous IUE, EUVE, and High-Energy Observations of 3C 273

We present the results of our 1994 January and 1995 January observations of the quasar 3C 273 obtained with the International Ultraviolet Explorer (IUE) and the Extreme-Ultraviolet Explorer (EUVE). These observations were part of a large multiwavelength campaign to observe 3C 273 from radio through gamma-rays. Our 1995 January photometric observations with the EUVE Lexan/B Deep Survey (DS) instrument indicate strong evidence for variability, at a 99% confidence level, during the 12 day observing period. We have utilized ROSAT PSPC soft X-ray power-law models to correlate with EUVE count rates. Besides variations in the normalization level between both observations, our EUV count rates are consistent with a simple power-law model with spectral index alpha approx. 1.77 (F(sub upsilon) proportional to upsilon(sup -alpha) that can be extrapolated from the soft X-rays to the EUV range. The active galactic nucleus 3C 273 is an important blazar to study because in our picture it reveals the presence of both disk and relativistic beam spectral contributions.

Ramos, E.↗

NASA NTRSDate not supplied

SLS Integrated Modal Test Uncertainty Quantification using the Hybrid Parametric Variation Method

Uncertainty in structural loading during launch is a significant concern in the development of spacecraft and launch vehicles. Small variations in launch vehicle and payload mode shapes and their interaction can result in significant variation in system loads. In many cases involving large aerospace systems it is difficult, not economical, or impossible to perform a system modal test. However, it is still vital to obtain test results that can be compared with analytical predictions to validate models. Instead, the “Building Block Approach” is used in which system components are tested individually. Component models are correlated and updated to agree as best they can with test results. The Space Launch System consists of a number of components that are assembled into a launch vehicle. Finite element models of the components are developed, reduced to Hurty/Craig-Bampton models and assembled to represent different phases of flight. The only opportunity to obtain modal test data from an assembled Space Launch System will be during the Integrated Modal Test. There is always uncertainty in every model, which flows into uncertainty in predicted system results. Uncertainty Quantification is used to determine statistical bounds on prediction accuracy based on model uncertainty. For the Space Launch System, model uncertainty is at the Hurty/Craig-Bampton component level. Uncertainty in the Hurty/Craig-Bampton components is quantified using the hybrid parametric variation approach that combines parametric and nonparametric uncertainty. Uncertainty in model form is one of the biggest contributors to uncertainty in complex built-up structures. This type of uncertainty cannot be represented by variations infinite element model input parameters and thus cannot be included in a parametric approach. However, model-form uncertainty can be modeled using a nonparametric approach based on random matrix theory. The hybrid parametric variation method requires the selection of dispersion values for the Hurty/Craig-Bampton fixed-interface eigenvalues, and the Hurty/Craig-Bampton stiffness matrices. Component test/analysis frequency error is used to identify the fixed-interface eigenvalue dispersions, while test/analysis cross-orthogonality is used to identify stiffness dispersion values. The hybrid parametric variation uncertainty quantification approach is applied to the Space Launch System Integrated Modal Test configuration. Monte Carlo analysis is performed, and statistics are determined for modal correlation metrics, frequency response from Integrated Modal Test shakers to selected accelerometers, as well as other metrics for determining how well target modes are excited and identified. If the predicted uncertainty envelopes future Integrated Modal Test results, then there will be increased confidence in the utility of the component-based hybrid parametric variation uncertainty quantification approach.

Uncertainty Quantification↗