Search NASA⌕ Search

SEARCH · Search NASA

Results for “data inventory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Modeling the Height of Young Forests Regenerating from Recent Disturbances in Mississippi using Landsat and ICESat data

Many forestry and earth science applications require spatially detailed forest height data sets. Among the various remote sensing technologies, lidar offers the most potential for obtaining reliable height measurement. However, existing and planned spaceborne lidar systems do not have the capability to produce spatially contiguous, fine resolution forest height maps over large areas. This paper describes a Landsat-lidar fusion approach for modeling the height of young forests by integrating historical Landsat observations with lidar data acquired by the Geoscience Laser Altimeter System (GLAS) instrument onboard the Ice, Cloud, and land Elevation (ICESat) satellite. In this approach, "young" forests refer to forests reestablished following recent disturbances mapped using Landsat time-series stacks (LTSS) and a vegetation change tracker (VCT) algorithm. The GLAS lidar data is used to retrieve forest height at sample locations represented by the footprints of the lidar data. These samples are used to establish relationships between lidar-based forest height measurements and LTSS-VCT disturbance products. The height of "young" forest is then mapped based on the derived relationships and the LTSS-VCT disturbance products. This approach was developed and tested over the state of Mississippi. Of the various models evaluated, a regression tree model predicting forest height from age since disturbance and three cumulative indices produced by the LTSS-VCT method yielded the lowest cross validation error. The R(exp 2) and root mean square difference (RMSD) between predicted and GLAS-based height measurements were 0.91 and 1.97 m, respectively. Predictions of this model had much higher errors than indicated by cross validation analysis when evaluated using field plot data collected through the Forest Inventory and Analysis Program of USDA Forest Service. Much of these errors were due to a lack of separation between stand clearing and non-stand clearing disturbances in current LTSS-VCT products and difficulty in deriving reliable forest height measurements using GLAS samples when terrain relief was present within their footprints. In addition, a systematic underestimation of about 5 m by the developed model was also observed, half of which could be explained by forest growth that occurred between field measurement year and model target year. The remaining difference suggests that tree height measurements derived using waveform lidar data could be significantly underestimated, especially for young pine forests. Options for improving the height modeling approach developed in this study were discussed.

Li, Ainong↗
NASA NTRSDate not supplied

Tropospheric Ozone in the NASA GEOS Model: Effects of Satellite NO2 Data Assimilation and Improvements in Background NOx Chemistry

Tropospheric ozone is a major atmospheric oxidant, the primary source of the hydroxyl radical, and a greenhouse gas. In the troposphere, it is produced from the oxidation of carbon monoxide and volatile organic compounds in the presence of nitrogen oxides (NOx=NO+NO2) or has its origins in the stratosphere. The tropospheric ozone burdens in global atmospheric chemistry models disagree by a factor of 1.5, indicating an incomplete understanding of ozone sources and sinks. Here we examine the tropospheric ozone simulation in NASA Global Modeling and Assimilation Office’s (GMAO’s) GEOS model with the GEOS-Chem chemistry mechanism (version 14.2), using observations from satellites, aircraft, ozonesondes, and surface sites. This modeling framework is used to produce GMAO’s GEOS Composition Forecasts (GEOS-CF), and it has been updated extensively with new emission inventories, improved model physics, satellite data assimilation capability, and an up-to-date chemical mechanism that includes tropospheric halogen chemistry and NOx recycling from particulate nitrate. Earlier versions of the model using GEOS-Chem version 12.0 showed an underestimate in tropospheric ozone in the northern hemisphere. We evaluate the ozone simulation in the updated model, focusing on the effects of assimilating satellite NO2 data from the Ozone Monitoring Instrument (OMI), constraining stratospheric ozone to satellite data, and updates to the NOx chemistry. We will examine changes in the vertical profiles of tropospheric ozone over the US in support of the Tropospheric Emissions: Monitoring of Pollution (TEMPO), and discuss implications for the tropospheric ozone budget.

V. Shah↗
NASA NTRSDate not supplied

Tropospheric Ozone in the NASA GEOS Model: Effects of Satellite Data Assimilation and Improvements in Background NO x Chemistry

Tropospheric ozone is a major atmospheric oxidant, the primary source of the hydroxyl radical, and a greenhouse gas. In the troposphere, it is produced from the oxidation of carbon monoxide and volatile organic compounds in the presence of nitrogen oxides (NO x =NO+NO 2 ) or has its origins in the stratosphere. The tropospheric ozone burdens in global atmospheric chemistry models disagree by a factor of 1.5, indicating an incomplete understanding of ozone sources and sinks. Here we examine the tropospheric ozone simulation in NASA Global Modeling and Assimilation Office’s (GMAO’s) GEOS model with the GEOS-Chem chemistry mechanism (version 14.2), using observations from satellites, aircraft, ozonesondes, and surface sites. This modeling framework is used to produce GMAO’s GEOS Composition Forecasts (GEOS-CF), and it has been updated extensively with new emission inventories, improved model physics, satellite data assimilation capability, and an up-to-date chemical mechanism that includes tropospheric halogen chemistry and NOx recycling from particulate nitrate. Earlier versions of the model using GEOS-Chem version 12.0 showed an underestimate in tropospheric ozone in the northern hemisphere. We evaluate the ozone simulation in the updated model, focusing on the effects of assimilating satellite NO 2 data from the Ozone Monitoring Instrument (OMI), constraining stratospheric ozone to satellite data, and updates to the NOx chemistry. We will examine changes in the vertical profiles of tropospheric ozone over the US in support of the Tropospheric Emissions: Monitoring of Pollution (TEMPO), and discuss implications for the tropospheric ozone budget.

Viral Shah↗
NASA NTRS1973

Investigations using data from Earth Resources Technology Satellite in the fields of agriculture/geography. Timber inventory (land use) in the Province of Huelva, Spain

A test site was chosen for the purpose of elaborating the patterns for the future total use of the satellite photographs. The election of the test site was made with the following criteria in mind: (1) a flat terrain for eliminating the dangers of shadows produced by a difficult topography; and (2) searching of well defined natural limits for the test site. Due to the lack of satellite photographs from the study area, a number of photos from the northern area of Spain have been studied from the point of view of obtaining answers from the spectra of the vegetation masses.

Debenito, E.↗
NASA NTRS1974

Evaluation and comparison of ERTS measurements of major crops and soil associations for selected test sites in the central United States

The author has identified the following significant results. Multispectral scanner data obtained by ERTS-1 over six test sites in the Central United States were analyzed and interpreted. ERTS-1 data for some of the test sites were geometrically corrected and temporally overlayed. Computer-implemented pattern recognition techniques were used in the analysis of all multispectral data. These techniques were used to evaluate ERTS-1 data as a tool for soil survey. Geology maps and land use inventories were prepared by digital analysis of multispectral data. Identification and mapping of crop species and rangelands were achieved throught the analysis of 1972 and 1973 ERTS-1 data. Multiple dates of ERTS-1 data were examined to determine the variation with time of the areal extent of surface water resources on the Southern Great Plain.

Baumgardner, M. F.↗
NASA NTRS1975

Regional inventories and mapping of land resources and environmental geology using remotely sensed data

Black-and-white stereoscopic aerial photographs at a scale of 1:20,000, 1:40,000, and 1:65,000 and controlled aerial photo mosaics at a scale of 1:24,000 were the basic data utilized for most mapping. Color and color infrared aerial photography (1:20,000) was employed to man the barrier islands, and color infrared photography (1:120,000) was used to map sand and mud units of the coastal plain north of Houston. LANDSAT-1 imagery in Bands 4, 5, and 7 (1:250,000) was utilized to examine land use and certain resource units statewide. Side scanning radar and LANDSAT imagery were studied experimentally toward mapping land suitability units in carbonate terranes with high relief and certain other terranes. Large-scale color and color infrared aerial stereoscopic photographs supply the most information for regional mapping. black-and-white photography is the most practical data for mapping because of scale, complete coverage, availability, and relatively low cost.

Wermund, E. G.↗
NASA NTRS1978

Large Area Crop Inventory Experiment (LACIE). Feasibility of assessing crop condition and yield from LANDSAT data

The author has identified the following significant results. Yield modelling for crop production estimation derived a means of predicting the within-a-year yield and the year-to-year variability of yield over some fixed or randomly located unit of area. Preliminary studies indicated that the requirements for interpreting LANDSAT data for yield may be sufficiently similar to those of signature extension that it is feasible to investigate the automated estimation of production. The concept of an advanced yield model consisting of both spectral and meteorological components was endorsed. Rationale for using meteorological parameters originated from known between season and near harvest dynamics in crop environmental-condition-yield relationships.

Source record↗
NASA NTRS1979

Thematic mapper design description and performance prediction

The new generation of satellite-borne earth resources scanners, the Thematic Mapper, is being built for launch on the Landsat-D spacecraft. It will gather data for applications such as crop inventory, land use planning, forest management, and geology. This paper gives an overall design description, further discussion of principal design features, performance achievements where data are available, and system performance predictions.

Lansing, J. C., Jr.↗
NASA NTRS2000

BOREAS TE-18, 30-m, Radiometrically Rectified Landsat TM Imagery

The BOREAS TE-18 team used a radiometric rectification process to produce standardized DN values for a series of Landsat TM images of the BOREAS SSA and NSA in order to compare images that were collected under different atmospheric conditions. The images for each study area were referenced to an image that had very clear atmospheric qualities. The reference image for the SSA was collected on 02-Sep-1994, while the reference image for the NSA was collected on 21-Jun-1995. the 23 rectified images cover the period of 07-Jul-1985 to 18 Sep-1994 in the SSA and from 22-Jun-1984 to 09-Jun-1994 in the NSA. Each of the reference scenes had coincident atmospheric optical thickness measurements made by RSS-11. The radiometric rectification process is described in more detail by Hall et al. (199 1). The original Landsat TM data were received from CCRS for use in the BOREAS project. The data are stored in binary image-format files. Due to the nature of the radiometric rectification process and copyright issues, these full-resolution images may not be publicly distributed. However, a spatially degraded 60-m resolution version of the images is available on the BOREAS CD-ROM series. See Sections 15 and 16 for information about how to possibly acquire the full resolution data. Information about the full-resolution images is provided in an inventory listing on the CD-ROMs. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Activity Archive Center (DAAC).

Hall, Forrest G.↗
NASA NTRS2018

The Central Role of Air Quality Observations in NASA's GEOS Composition Forecasting Model

The NASA GEOS composition forecast model (GEOS-CF) provides global, high-resolution (25 km) air quality forecasts in near-real time. This system combines the operational GEOS-5 weather forecasting model with the state-of-the-science GEOS-Chem chemistry module to provide detailed chemical analysis of a wide range of air pollutants such as ozone, carbon monoxide, nitrogen oxides, and fine particulate matter (PM2.5). The resolution of the forecasts is the highest compared to current, publicly-available global composition forecasts.Air quality observations are an indispensable tool to evaluate the model's ability to capture the strong temporal and spatial gradients of air pollutants across the globe. We show how comparisons against near-real time observations available through OpenAQ (www.openaq.org) demonstrate the model's overall success in reproducing surface concentrations of ozone, nitrogen dioxide, and PM2.5. This analysis also helps identifying current limitations of the model, for example over South America. The model-observation mismatches are most likely caused by uncertainties in the emissions data. Using the example of Rio de Janeiro, we show how the model skill can be improved by using local, high-resolution emission inventories in combination with air quality data.

Keller, Christoph A.↗
DOE OSTI2017

Development of the Advanced D1S for Shutdown Dose Rate Calculations in Fusion Reactors

The assessment of the shutdown dose rate due to neutron activation is fundamental for shielding design, materials selection, licensing and planning of maintenance operations in high performances fusion devices. The shutdown dose rate calculations require the combined use of radiation transports and inventory codes. The typical approach consists in a two steps procedure. A pure neutron transport simulation is performed in a first step to calculate the spatial distribution of neutron spectra. The results are used as input for an activation calculation that provides the decay gamma source used in a second step for a pure gamma transport simulation (rigorous-two step, R2S). The Direct 1-Step (D1S) approach has been developed more than ten years ago by ENEA and the ITER team: this technique relies on a coupled neutron-decay gamma transport in a single simulation. It is based on the use of a modified version of the MCNP5 Monte Carlo code with specially tailored nuclear cross-section data for transport and FISPACT inventory code for temporal behaviour. The 'Advanced-D1S' is an improved version of D1S in which additional computational features have been introduced, such as the mesh tally capability and continuous time evolution assessment of the dose rate in single run dose. It has been validated through measurements at JET tokamak and comparison with R2S codes and a future benchmark experiment during next high performance deuterium-tritium campaign is in preparation at JET. It has also been extensively used for ITER calculations and recently applied to DEMO assessment. Present limitations and in progress code improvement strategy are described and discussed in this paper.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2024

FY 2024 Multidimensional Data Correlation Platform Data Management Infrastructure Progress: Materials Laboratory

This report provides an inventory of the equipment available at the ORNL Manufacturing Demonstration Facility (MDF) for sample preparation and material characterization, including both destructive and non-destructive techniques that generate critical data to support the development of the Multi-Dimensional Data Correlation (MDDC) framework. The success of the MDDC framework depends heavily on the quality and completeness of the data it can access. Therefore, it is essential to establish a comprehensive inventory of the technologies available to the Advanced Materials and Manufacturing Technologies (AMMT) multi-laboratory team. This starts by gathering information about the types of data they produce, the data collection and transfer protocols used, file formats, and data storage requirements for experiments. This information is then carefully evaluated to create the operations and trackables elements of the Damara Tern platform, which is the foundation of the MDDC framework.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Student Research Projects

Numerous FY1998 student research projects were sponsored by the Mississippi State University Center for Air Sea Technology. This technical note describes these projects which include research on: (1) Graphical User Interfaces, (2) Master Environmental Library, (3) Database Management Systems, (4) Naval Interactive Data Analysis System, (5) Relocatable Modeling Environment, (6) Tidal Models, (7) Book Inventories, (8) System Analysis, (9) World Wide Web Development, (10) Virtual Data Warehouse, (11) Enterprise Information Explorer, (12) Equipment Inventories, (13) COADS, and (14) JavaScript Technology.

Yeske, Lanny A.↗
NASA NTRS1973

The use of color infrared photography for wetlands mapping with special reference to shoreline and waterfowl habitat assessment

Evaluation of low altitude oblique photography obtained by hand-held cameras was useful in determining specifications of operational mission requirements for conventional smaller-scaled vertical photography. Remote sensing techniques were used to assess the rapid destruction of marsh areas at Pointe Mouillee. In an estuarian environment where shoreline features change yearly, there is a need for revision in existing area maps. A land cover inventory, mapped from aerial photography, provided essential data necessary for determining adjacent lands suitable for marshland development. To quantitatively assess the wetlands environment, a detailed inventory of vegetative communities (19 categories) was made using color infrared photography and intensive ground truth. A carefully selected and well laid-out transect was found to be a key asset to photointerpretation and to the analysis of vegetative conditions. Transect data provided the interpreter with locally representative areas of various vegetative types. This facilitated development of a photointerpretation key. Additional information on vegetative conditions in the area was also obtained by evaluating the transect data.

Source record↗
DOE OSTI2019

Mid-Atlantic U.S. Offshore Carbon Storage Resource Assessment Project (Final Technical Report)

The greatest potential for carbon storage in the northeastern United States lies in the offshore geologic formations comprising the outer continental shelf (Monteverde et al., 2011). Offshore storage can be linked to large point-sources of carbon dioxide (CO 2 ) while avoiding many of the logistical difficulties and potential risks encountered when siting onshore projects, especially in densely populated areas of the East Coast. Offshore CO 2 storage assessment and research in the United States is underway to address uncertainty in potential storage resources, particularly in the mid- and north-Atlantic offshore area. Given the current knowledge base and access to publicly available data, the objectives of the Mid-Atlantic U.S. Offshore Carbon Storage Resource Assessment Project (MAOCSRAP) were fourfold: (1) complete a systematic carbon storage resource assessment of the mid-Atlantic offshore coastal region from the Georges Bank Basin (GBB) through the Long Island Platform (LIP) to the southern Baltimore Canyon Trough (BCT); (2) define key input parameters to reduce uncertainty for offshore storage resource and efficiency estimates; (3) perform a preliminary assessment of risk factors, uncertainties, and data gaps; and (4) engage industry and regulatory stakeholders through development of a Road Map to assist future project planning and implementation. The MAOCSRAP project has compiled, inventoried, and assimilated various publicly available data sets to provide a strong technical basis on which future carbon storage studies and applications can be built. The knowledge infrastructure necessary to support the development of full-scale offshore carbon storage include: Defining the geologic characteristics of candidate storage sites (Chapter 2). Using existing seismic data to better define the continuity of the storage zones and seals (Chapter 3). Cataloguing the hydrogeologic properties of mid-Atlantic offshore storage sites (Chapter 4). Calculating prospective CO 2 storage resources using net effective pore volumes and fluid displacement properties specific to offshore lithologies (Chapter 5). Examining risk factors related to offshore storage (Chapter 6). Communicating with industry and other stakeholders about the future prospects for offshore storage (Chapter 7). Ensuring technology transfer to industry and other stakeholders (Chapter 8). Led by Battelle, this project was conducted by public and private entities with expertise in offshore geology and resources for the study region, including state geological surveys of Delaware, Maryland, and Pennsylvania; United States Geological Survey-Woods Hole Coastal and Marine Science Center and Haifa University; Rutgers University; Harvard University; and Lamont-Doherty Earth Observatory (LDEO) at Columbia University. The storage resource assessment was completed for a broad region offshore of the U.S. East Coast, from Massachusetts to Virginia. The results include high-level storage resource estimates for areas not previously characterized and improved storage resource estimates for geographically expansive portions of offshore geologic units. Results of the project provide a foundation for developing CO 2 storage along offshore areas of the mid-Atlantic United States. A combination of information was used to provide confidence in project results. Key findings of the major project tasks are summarized as follows. Subsurface Data Analysis: Legacy seismic, well-log, core, and biostratigraphic data were digitized, reprocessed, and analyzed using modern techniques, augmenting previous characterization efforts. The sequence stratigraphic framework for the Cretaceous and Jurassic strata was developed by correlating well-log depositional sequences to seismic reflectors identified in the BCT, LIP, and GBB. The integration of well-log stratigraphy with seismic stratigraphy and petrophysical analysis helped to identify and map potential storage zones within sequences of the Logan Canyon (LC), Missisauga, and Mohawk formations, as well as the regionally extensive caprock comprised of the Dawson Canyon shale. Approximately 4,000 kilometers (km) of seismic data was reprocessed to create a structural framework that was used to tie together all available well data, constrain sequence stratigraphic interpretations, and make regional assessments of offshore carbon storage resources. Prospective storage resource estimates were 150 to 1136 megatons (Mt) for the combined storage zones. This suggests mid-Atlantic U.S. offshore formations can store decades of CO 2 from industrial sources in the region. Preliminary local reservoir simulations suggest that injection rates of 1 Mt CO 2 /year may be sustained for 30 years in single injection wells in the BCT. Advanced geologic modeling and new data acquisition are needed to address data gaps and advance carbon capture and storage (CCS) in key offshore areas selected for further investigation. Offshore Risk Factors: Offshore geologic risk factors include soft sediment deformation, unit continuity, sedimentological and structural features, seismicity and hydrates. CO 2 storage risks include inadequate seals, migration/leakage, and chemical interactions leading to decreased storage. Sensitive habitats, environmental impacts, disturbance to seafloor, and other risks need to be identified in advance of project activities and integrated into detailed mitigation plans for all project phases. Stakeholder Engagement: Input and participation from government, industry, and environmental groups provided input into the Road Map and address next steps needed for project deployment. Early engagement and ongoing communication, as well as policy framework development, is key to large-scale deployment of CCS. Next Steps: This project represents an important first step by completing a high-level CO 2 storage resource assessment and building the knowledge infrastructure necessary to improve quantitative storage resource estimates. The data sets that have been curated under this project provide an opportunity to conduct research and development (R&D) needed to address data gaps and reduce risk and uncertainty. Offshore characterization and validation strategies that are systematically designed to provide data and infrastructure that can be upscaled to meet commercial requirements could be developed off of this foundation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRSDate not supplied

Complications of Metadata Curation for NASA Airborne and Field Campaigns, Platforms, and Instruments

The Airborne Data Management Group (ADMG) curates metadata that describe NASA's airborne and field campaigns, platforms and instruments. This activity is vital to building a useful inventory of sub-orbital Earth science data that improves data discovery and access. During the curation process, many metadata issues were identified that required improvement to campaign and data product metadata. In some cases, locating the needed metadata to add to the inventory was a simple process. For other cases, the information was hard to find. In addition, identifying accurate investigation instrument details to add to the inventory was especially complicated because of the variety of definitions used in the Earth science community for the same concepts. One example of this is the concept of instruments' spatial and temporal resolution. The spatial resolution is one of the more difficult elements to curate given the variations in meaning across various disciplines. Clarified definitions are needed to enable consistency of information across campaigns and instruments. In this presentation, we introduce results from a survey of scientists from various fields in which we asked for definitions of spatial and temporal resolution. Our survey results highlight the importance of creating more universally acceptable definitions for certain metadata elements. By curating sub-orbital field campaign and instrument metadata, ADMG is enabling more efficient discovery and access to NASA observations by allowing science data users to search for certain clearly defined criteria and metadata values.

Ashlyn Shirey↗