Search NASA⌕ Search

SEARCH · Search NASA

Results for “data replication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Best Practices for Operando Battery Experiments: Influences of X-ray Experiment Design on Observed Electrochemical Reactivity

Operando experiments are increasingly being applied to capture dynamic reaction intermediates and explore kinetic effects in energy storage research and other areas. A critical assumption of such operando studies is that the data accurately represents the intrinsic system behavior, that is, the system is not perturbed by interaction with the probe or by the sample environment used to replicate the reaction conditions. Here we explore how electrochemical reactivity can be impacted by experiment design, including by X-ray beam interactions or by features of some operando electrochemical cell designs. The results show that without careful experiment design, the electrochemical reactivity in the region being probed by the X-ray beam can be retarded relative to the rest of the cell without obvious signs in the overall cell capacity or electrochemical profile. This can lead to conflicting reports in the literature and incorrect conclusions on reaction mechanisms. Recommendations for reliable operando electrochemical experiments are given.

batteries↗
DOE OSTI2014

The R35 residue of the influenza A virus NS1 protein has minimal effects on nuclear localization but alters virus replication through disrupting protein dimerization

The influenza A virus NS1 protein has a nuclear localization sequence (NLS) in the amino terminal region. This NLS overlaps sequences that are important for RNA binding as well as protein dimerization. To assess the significance of the NS1 NLS on influenza virus replication, the NLS amino acids were individually mutated to alanines and recombinant viruses encoding these mutations were rescued. Viruses containing NS1 proteins with mutations at R37, R38 and K41 displayed minimal changes in replication or NS1 protein nuclear localization. Recombinant viruses encoding NS1 R35A were not recovered but viruses containing second site mutations at position D39 in addition to the R35A mutation were isolated. The mutations at position 39 were shown to partially restore NS1 protein dimerization but had minimal effects on nuclear localization. These data indicate that the amino acids in the NS1 NLS region play a more important role in protein dimerization compared to nuclear localization. - Highlights: • Mutations were introduced into influenza NS1 NLS1. • NS1 R37A, R38A, K41A viruses had minimal changes in replication and NS1 localization. • Viruses from NS1 R35A rescue all contained additional mutations at D39. • NS1 R35A D39X mutations recover dimerization lost in NS1 R35A mutations. • These results reaffirm the importance of dimerization for NS1 protein function.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Molecular and Topographical Organization: Influence on Cicada Wing Wettability and Bactericidal Properties

Numerous natural surfaces have micro/nanostructures that result in extraordinary functionality, such as superhydrophobicity, self-cleaning, antifogging, and antimicrobial properties. One such example is the cicada wing, where differences in nanopillar geometry and composition among species can impact and influence the degree of exhibited properties. To understand the relationships between surface topography and chemical composition with multifunctionality, the wing properties of Neotibicen pruinosus (superhydrophobic) and Magicicada cassinii (hydrophobic) cicadas are investigated at time points after microwave-assisted extraction of surface molecules to characterize the chemical contribution to nanopillar functionality. Electron microscopy of the wings throughout the extraction process illustrates nanoscale topographical changes, while concomitant changes in hydrophobicity, bacterial fouling, and bactericidal properties are also measured. Extract analysis reveals the major components of the nanostructures to be fatty acids and saturated hydrocarbons ranging from C17 to C44. Effects on the antimicrobial character of a wing surface with respect to the extracted chemicals suggest that the molecular composition of the nanopillars plays both a direct and an indirect role in concert with nanopillar geometry. The data presented not only correlates the nanopillar molecular organization to macroscale functional properties, but it also presents design guidelines to consider during the replication of natural nanostructures onto engineered substrates to induce desired properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Jet stability and wall impingement flow field in a thermal striping experiment

We present velocity and temperature field measurements for a 0.9 x 0.9 x 1.7 m glass tank in which two air jets at Re=10000 mix and impinge upon the lid at ambient temperature and pressure. Flow patterns are characterized across a 350 x 200 mm plane located 3 mm below the lid for two inlet geometries: 1) “extended”, in which inlet channels protrude above the tank base, and 2) “flush”, a flat base without protrusions. This minor geometry variation produced distinct changes in the lid flow field, appearing as three stagnant regions for the extended case and only one for flush. The dichotomy is attributed to system stability characteristics: jets are stable in the extended case and unstable for flush. In a separate set of nonisothermal tests, the impingement temperature field was measured for inlet temperature mismatches of 4 oC and jets near Re=10000. A 50 m-long fiber optic distributed temperature sensor positioned 2 mm below the lid measured at 1350 locations. Like the velocity fields, the temperature fields differ for the two inlet geometries: good thermal mixing for the flush case and subdued mixing for the extended case. Simulations with the spectral element code Nek5000 replicated the observed stability dichotomy, duplicating the number of stagnant regions observed in the experiment and matching their locations within ±10 mm. Simulation data suggests that flush case instability is due to interactions between jets and wall flows at the bottom of the tank. The clear flow dichotomy exhibited by this two-jet setup presents an unambiguous case to test the ability of CFD tools to predict subtle flow field changes driven by minor modifications in geometry in the context of thermal striping.

42 ENGINEERING↗
DOE OSTI2021

Improving Data and Prediction Quality of High-Throughput Perovskite Synthesis with Model Fusion

Combinatorial fusion analysis (CFA) is an approach for combining multiple scoring systems using the rank-score characteristic function and cognitive diversity measure. One example is to combine diverse machine learning models to achieve better prediction quality. In this work, we apply CFA to the synthesis of metal halide perovskites containing organic ammonium cations via inverse temperature crystallization. Using a data set generated by high-throughput experimentation, four individual models (support vector machines, random forests, weighted logistic classifier, and gradient boosted trees) were developed. We characterize each of these scoring systems and explore 66 possible combinations of the models. When measured by the precision on predicting crystal formation, the majority of the combination models improves the individual model results. The best combination models outperform the best individual models by 3.9 percentage points in precision. In addition to improving prediction quality, we demonstrate how the fusion models can be used to identify mislabeled input data and address issues of data quality. In particular, we identify example cases where all single models and all fusion models do not give the correct prediction. Experimental replication of these syntheses reveals that these compositions are sensitive to modest temperature variations across the different locations of the heating element that can hinder or enhance the crystallization process. In summary, we demonstrate that model fusion using CFA can not only identify a previously unconsidered influence on reaction outcome but also be used as a form of quality control for high-throughput experimentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparing traditional and Bayesian approaches to ecological meta‐analysis

Abstract Despite the wide application of meta‐analysis in ecology, some of the traditional methods used for meta‐analysis may not perform well given the type of data characteristic of ecological meta‐analyses. We reviewed published meta‐analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies ( n i ) and the number of studies or records ( k ) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta‐analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that n i and k were highly variable, distributions were right‐skewed and were generally small (median n i = 5, median k = 44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval (CI) based on the t distribution that uses an adjusted standard error (the Hartung–Knapp–Sidik–Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z distribution CIs had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta‐analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random‐effects meta‐analysis, the performance of the best frequentist and Bayesian methods was similar for the same combinations of factors ( k and mean replication), though the Bayesian approach had higher than nominal (>95%) coverage for the mean effect when k was very low ( k < 15). Our literature review suggests that many meta‐analyses that used z distribution or bootstrapping CIs may have overestimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta‐analyses.

Pappalardo, Paula↗
DOE OSTI2022

A seed-like proteome in oil-rich tubers

There are numerous examples of plant organs or developmental stages that are desiccation-tolerant and can withstand extended periods of severe water loss. One prime example are seeds and pollen of many spermatophytes. However, in some plants, also vegetative organs can be desiccation-tolerant. One example are the tubers of yellow nutsedge ( Cyperus esculentus ), which also store large amounts of lipids similar to seeds. Interestingly, the closest known relative, purple nutsedge ( Cyperus rotundus ), generates tubers that do not accumulate oil and are not desiccation-tolerant. We generated nanoLC-MS/MS-based proteomes of yellow nutsedge in five replicates of four stages of tuber development and compared them to the proteomes of roots and leaves, yielding 2257 distinct protein groups. Our data reveal a striking upregulation of hallmark proteins of seeds in the tubers. A deeper comparison to the tuber proteome of the close relative purple nutsedge ( C. rotundus ) and a previously published proteome of Arabidopsis seeds and seedlings indicates that indeed a seed-like proteome was found in yellow but not purple nutsedge. This was further supported by an analysis of the proteome of a lipid droplet-enriched fraction of yellow nutsedge, which also displayed seed-like characteristics. One reason for the differences between the two nutsedge species might be the expression of certain transcription factors homologous to ABSCISIC ACID INSENSITIVE3, WRINKLED1, and LEAFY COTYLEDON1 that drive gene expression in Arabidopsis seed embryos.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Next-generation wargames

Over the past century, and particularly since the outset of the Cold War, wargames (interactive simulations used to evaluate aspects of tactics, operations, and strategy) have become an integral means for militaries and policy-makers to evaluate how strategic decisions are made related to nuclear weapons strategy and international security. Furthermore, these methods have also been applied beyond the military realm, to examine phenomena as varied as elections, government policy, international trade, and supply-chain mechanics. Today, a renewed focus on wargaming combined with access to sophisticated and inexpensive drag-and-drop digital game development frameworks and new cloud computing architectures have democratized the ability to enable massive multiplayer gaming experiences. With the integration of simulation tools and experimental methods from a variety of social science disciplines, a science-based experimental gaming approach has the potential to transform the insights generated from gaming by creating human-derived, large-n datasets for replicable, quantitative analysis. In the following, we outline challenges associated with contemporary simulation and wargaming tools, investigate where scholars have searched for game data, and explore the utility of new experimental gaming and data analysis methods in both policy-making and academic settings.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Electronic Visualization Laboratory's 50th Anniversary Retrospective: Look to the Future, Build on the Past

September 2023 marks the 50th anniversary of the Electronic Visualization Laboratory (EVL) at University of Illinois Chicago (UIC). EVL's introduction of the CAVE Automatic Virtual Environment in 1992, the first widely replicated, projection-based, walk-in, virtual-reality (VR) system in the world, put EVL at the forefront of collaborative, immersive data exploration and analytics. However, the journey did not begin then. Since its founding in 1973, EVL has been developing tools and techniques for real-time, interactive visualizations—pillars of VR. But EVL's culture is also relevant to its successes, as it has always been an interdisciplinary lab that fosters teamwork, where each person's expertise contributes to the development of the necessary tools, hardware, system software, applications, and human interface models to solve problems. Over the years, as multidisciplinary collaborations evolved and advanced scientific instruments and data resources were distributed globally, the need to access and share data and visualizations while working with colleagues, local and remote, synchronous and asynchronous, also became important fields of study. This paper is a retrospective of EVL's past 50 years that surveys the many networked, immersive, collaborative visualization and VR systems and applications it developed and deployed, as well as lessons learned and future plans.

Johnson, Andrew E.↗
DOE OSTI2015

Use of XRF to characterize pre-Hanford orchards in the 100-OL-1 operable unit - 15717

Prior to 1943, Hanford site included several small towns with approximately 5,000 acres of orchards; at the time lead arsenate (PbHAsO{sub 4}) was the most commonly used pesticide. High concentration of lead and arsenic have been recorded where trees and stumps are still visible. Pre-Hanford orchards have been designated as 100-OL-1 Operable Unit. An Optimization study evaluated optimal counting time and position of the XRF from soils collected at the site. A Pilot Study included the evaluation of a field portable x-ray fluorescence (XRF) analyzer determining if performance results meet quality assurance criteria for cleanup. XRF has only previously been used as a screening tool. Four Decision Units (DUs) are to be analyzed: Ol-14. OL-32. OL-IU6-4 and OL-FR2-1. The DUs vary in size and have had distinct historic activities; such as 46.4 acres OL-14 having a military camp in the 1950's unlike OL-FR2-1 having been disturbed as it is near the F area reactor. Together the DUs provide an adequate representation of the Operable Unit. Screening criteria for lead (250 mg/kg) and arsenic (20 mg/kg). Six samples were collected ranging above, at, and below the screening criteria of 250 mg/kg for Pb and 20 mg/kg for As at the Decision Units OL-14 and OL-IU6-4, and labeled respectively. Samples were hand sieved, homogenized and placed in sample cups. Three replicates were prepared for each sample. Each sample cup was analyzed 3 times for 30 sec. A Standard Reference Material (SRM) was analyzed after every 20 readings. Three samples were selected for 15, 30, 45, 60, 90, 120, 150 and 180 second fixed and variable analysis. Two transects at OL-14, and one at OL-IU6-4 were created by selecting locations 90. around ground zero at distances of 0.5, 1, 2, 4, 8 and 12 feet (16 ft for OL-14). Locations were scanned in triplicate for 60 seconds each. 4 Decision Units spanning roughly 370 acres were chosen to represent 100-OL-1 Operable Unit. 40 locations within each DU were selected using Visual Sample Plan (VSP) with a random start and systematic grid pattern. Each location would be analyzed with 3 replicates and a 60 second count time. The Standard Reference Material (SRM) and blank are analyzed after every 20 counts to ensure accuracy. Data is extracted from XRF to be implemented in GIS for visual representation of site with 1943 and 2013 aerial imagery. Discussion/Conclusion: - XRF provided a good indication of precision and accuracy relative to ICP with a linear correlation R{sup 2} value higher than anticipated at .9735; - MDL proved the detection limit is significantly lower than the screening criteria; - When comparing results from the first 40 locations of OL-14 to the total 80 locations of OL-14, the same variability was seen; - We expect high concentrations of Pb and As to be where past orchards are present though this does not occur as all sites. Significance: - XRF is competent for decision making as values fall within ±20% ICP data; - The highest concentrations are not where expected, which may be an issue for sites outside of Hanford that have had more development; - The size of the DU does not affect the number of samples measured. Future Work: - Verification and validation of the XRF Data (QA/QC); - Revise conceptual site model; - Statistical evaluations to investigate: Estimation of variability in surface soils, appropriate size for DU, and sample size per DU; - Coordinating sample results through CORE; - Displaying sample results in PHOENIX (GIS tool)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

SPRUCE Deep Peat Heating (DPH) Peat Water Content and Temperature for Experimental Plot Cores, June 2014 through June 2015

This data set provides the peat water content and peat temperature at time of sampling for peat cores collected before and during the SPRUCE Deep Peat Heating (DPH) study. Cores were collected during three sampling events: 03 June 2014, 09 September 2014, and 16 June 2015. Two cores were extracted from hollow locations in each of the 10 experimental plots (4, 6, 8, 10, 11, 13, 16, 17, 19, and 20). The five ambient plots (5, 7, 14, and 21) were not included in the DPH sampling efforts. See Table 1. Cores were partitioned into samples at 11 depth increments: 0-10, 10-20, 20-30, 30-40, 40-50, 50-75, 75-100, 100-125, 125-150, 150-175, and 175-200 cm below surface of the hollow. The DPH study was undertaken to evaluate possible rapid responses of deep peat carbon (C) stocks, microbial communities, and biogeochemical cycling processes to unprecedented temperatures. In June 2014, deep soil heating was initiated at 5 warming levels (+0, +2.25, +4.5, +6.75 and +9 °C) with 2 replicate plots per level. Warming levels at depth were achieved over a 25 (+ 2.25 °C) to 60-day (+9 °C) period depending on the target treatment temperatures. Data file – There is one comma-separated (*.csv) file with peat core water content and temperature at time of sampling, plus the amount of dried archived material retained after analyses. User Note: In this third release, four variables related to extrapolations of peat core temperature were removed. See the Data Set History table for additional details. 25-150, 150-175, and 175-200 cm below surface of the hollow.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Nuclear Data Adjustment for Nonlinear Applications in the OECD/NEA WPNCS SG14 Benchmark—A Bayesian Inverse UQ-Based Approach for Data Assimilation

The Organisation for Economic Co-operation and Development Working Party on Nuclear Criticality Safety has proposed a benchmark exercise to assess the performance of current nuclear data adjustment techniques applied to nonlinear applications and experiments with low correlation to applications. This work introduces Bayesian inverse uncertainty quantification (IUQ) employing scientific machine learning surrogate models as a method for nuclear data adjustments in this benchmark, and compares IUQ to the more traditional methods of generalized linear least squares (GLLS) and Monte Carlo Bayes (MOCABA). Posterior predictions from IUQ showed agreement with GLLS and MOCABA for linear applications. Here, when comparing GLLS, MOCABA, and IUQ posterior predictions to computed model responses using adjusted parameters, we observe that the GLLS predictions failed to replicate the computed response distributions for nonlinear applications, while MOCABA showed near agreement, and IUQ used the computed model responses directly. We also discuss observations on why experiments with low correlation to applications can be informative to nuclear data adjustments and identify some properties useful in selecting experiments for inclusion in nuclear data adjustment. Performance in this benchmark indicates potential for Bayesian IUQ in nuclear data adjustments.

Bayesian calibration↗
DOE OSTI2018

Meter-based synthesis of equipment schedules for improved models of electrical demand in multifamily buildings

Here, the authors present a novel method for using electrical meter data to synthesize realistic equipment use schedules that can improve models of electrical demand in buildings. Other methods exist for creating schedules based on historical data from a limited set of past field studies, but the method presented here is unique because it allows a modeller to customize and calibrate equipment use schedules based on user-specified meter data and load profile metrics. Additionally, a case study with water heaters demonstrates that this schedule synthesis method can outperform traditional modelling strategies by replicating key characteristics of a measured equipment load profile, including its magnitude, variability, and relationships between load and time. In particular, the new method was more effective at replicating the total water heater electrical load duration curve and ramp duration curve of a real-world reference building.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Validation and Verification of TEDS Facility HYBRID Modeling

The HYBRID modeling repository is an in-house developed library of models for selected integrated energy systems (IES) modelling. HYBRID models have been developed since 2015 to describe the physical operation of tightly coupled thermal systems including power generators, thermal transport systems, thermal storage, thermal-to-electric conversion systems, and other thermal applications. Here, validation and verification (V&V) capabilities are demonstrated using the Thermal Energy Distribution System (TEDS) at INL. Building upon prior work, the TEDS model has been updated and verified so that it better represents the installed system configuration and the operating control system. The model control system was changed to allow replication of actual experimental procedures. Experimental operations focusing primarily on thermocline tank performance were devised and performed. Several anomalies were found in the operation data of the experiment facility. V&V activities calibrating a selected input parameter are demonstrated on a single component as well as with a single parameter within the thermocline. Calibrating is then demonstrated on multiple components and a multi-parameter metric for the entire system. The validation methodology is successfully applied to validate the model with experimental data. It is also used to confirm a hypothesis behind one of the anomalies in experimental performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Future Automotive Systems Technology Simulator (FASTSim) Validation Report - 2021

The National Renewable Energy Laboratory's Future Automotive Systems Technology Simulator (FASTSim) captures the most important factors influencing vehicle power demands and performs large-scale fuel efficiency calculations very quickly. These features make FASTSim well suited to evaluate a representative distribution of real-world fuel efficiency over a large quantity of in-use driving profiles, which have become increasingly available in recent years owing to incorporation of Global Positioning System data collection into various travel surveys and studies. In addition, by being open source, computationally lightweight, freely available, and free from expensive third-party software requirements, analyses conducted using FASTSim may be easily replicated and critiqued in an open forum. This is highly desirable for situations in which technical experts seek to reach consensus over questions about what vehicle development plans or public interest strategies could maximize fuel savings and minimize adverse environmental impacts with an evolving vehicle fleet. While FASTSim continues to be refined and improved on an ongoing basis, this report compiles available runs using versions of the tool from the past few years to provide illustrative comparisons of the model results against measured data.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2014

Comparative genomic and proteomic analyses of Clostridium acetobutylicum Rh8 and its parent strain DSM 1731 revealed new understandings on butanol tolerance

Highlights: • Genomes of a butanol tolerant strain and its parent strain were deciphered. • Comparative genomic and proteomic was applied to understand butanol tolerance. • None differentially expressed proteins have mutations in its corresponding genes. • Mutations in ribosome might be responsible for the global difference of proteomics. - Abstract: Clostridium acetobutylicum strain Rh8 is a butanol-tolerant mutant which can tolerate up to 19 g/L butanol, 46% higher than that of its parent strain DSM 1731. We previously performed comparative cytoplasm- and membrane-proteomic analyses to understand the mechanism underlying the improved butanol tolerance of strain Rh8. In this work, we further extended this comparison to the genomic level. Compared with the genome of the parent strain DSM 1731, two insertion sites, four deletion sites, and 67 single nucleotide variations (SNVs) are distributed throughout the genome of strain Rh8. Among the 67 SNVs, 16 SNVs are located in the predicted promoters and intergenic regions; while 29 SNVs are located in the coding sequence, affecting a total of 21 proteins involved in transport, cell structure, DNA replication, and protein translation. The remaining 22 SNVs are located in the ribosomal genes, affecting a total of 12 rRNA genes in different operons. Analysis of previous comparative proteomic data indicated that none of the differentially expressed proteins have mutations in its corresponding genes. Rchange Algorithms analysis indicated that the mutations occurred in the ribosomal genes might change the ribosome RNA thermodynamic characteristics, thus affect the translation strength of these proteins. Take together, the improved butanol tolerance of C. acetobutylicum strain Rh8 might be acquired through regulating the translational process to achieve different expression strength of genes involved in butanol tolerance.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Quantitative wood–adhesive penetration with X-ray computed tomography

Micro X-ray computed tomography (XCT) was used to analyze the 3D adhesive penetration behavior of different wood–adhesive bondlines. Three adhesives, a phenol formaldehyde (PF), a polymeric diphenylmethane diisocyanate (pMDI), and a hybrid polyvinyl acetate (PVA), all tagged with iodine for enhanced X-ray attenuation, were used to prepare single-bondline laminates in two softwoods, Douglas-fir and loblolly pine, and one hardwood, a hybrid polar. Adhesive penetration depth was measured with two separate calculations, and results were compared with 2D fluorescent micrographs. A total of 54 XCT scans were collected, representing six replicates of each treatment type; each replicate, however, consisted of approximately 1500 individual, cross-section slices stacked along the specimen length. As these adhesives were highly modified, the presented results do not indicate typical behavior for their broader adhesive classes. Still, clear penetration differences were observed between each adhesive type, and between wood species bonded with both the PF and pMDI adhesives. Furthermore, penetration results depended on the calculation method used. Two adhesive types with noticeably different resin distributions in the cured bondline, showed relatively similar penetration depths when calculated with a traditional effective penetration equation. However, when the same data was calculated with a weighted penetration calculation, which accounts for both adhesive area and depth, the results appeared to better represent the different distributions depicted in the photomicrographs and tomograms. Additionally, individual replicate comparisons showed variation due to specimen anatomy, not easily observed or interpreted from 2D images. Finally, 3D views of segmented 3D adhesive phases offered unique, in-situ views of the cured adhesive structures. In particular, voids formed by CO 2 bubbles generated during pMDI cure were clearly visible in penetrated columns of the solidified adhesive.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

The Hunt for Green Every April: Factors Affecting Fitness in Switchgrass

This grant funded work was undertaken to develop fundamental biological knowledge of the factors affecting the complex plant trait “fitness” in switchgrass (Panicum virgatum L.), a plant being developed as a biomass crop. Using a diverse range of latitudinally-adapted switchgrass plants, genomic, molecular and physiological studies were performed to track a number of different aspects of plant genetics and physiology over the course of the growing season. Work was performed on both genetically unrelated and genetically related plants. Plants were established in the field from seedlings raised in a greenhouse, or from clones present in other field nurseries. Field grown plants were used as the source of all tissues. The three objectives of this proposal were:(1) Transcript Profiling, Metabolomics, and C and N Partitioning and Recycling in Crowns and Rhizomes of Switchgrass over two growing seasons; (2) Gene Profiling During Regreening and Dormancy of Bulked Segregants; (3) Extent of Linkage Disequilibrium in Populations for Adaptation and Fitness Traits Being Developed for Central and Northern USA, that Show Significant Heterosis. Objective 1 results: Plants were labeled using 13 CO2 (a stable isotope) using an acrylic chamber constructed specifically for this purpose. Plants became labeled with 13 C and label decayed in aerial tissues over the course of the growing season. Varying amounts of 13 C were recovered in the rhizomes. These data are being analyzed. Plants were also labeled with 15 N-urea. Plants absorbed significant amounts of label that was remobilized to the growing shoots. N-dynamics would suggest that a portion of the 15 N absorbed into the crowns and rhizomes is sequestered below ground. Variable amounts of 15 N were translocated from the shoots to the roots over the course of the growing season. Polar metabolites extracted from a diverse array of rhizomes were analyzed using GCMS. Data indicated that there was a significant shift in metabolite pools over the course of the growing season, and differences in the levels of specific metabolites could be linked to the progression of dormancy. Several metabolites that accumulate in dormant rhizomes were identified. Some of these metabolites could be potentially linked to winter-survival of switchgrass. Extensive high-throughput sequencing was conducted on crown and rhizome samples collected from field grown plants. Initial work was performed on a Roche 454 system. All later work was performed on an Illumina sequencing-by-synthesis system. Some of these datasets have been published as peer-reviewed papers, other data are currently being analyzed and being readied for publication. Objective 2 results: Genetically related but phenotypically divergent plants from an octaploid switchgrass population were grown in a replicated field nursery. Rhizomes were harvested at four different times over the course of the growing season from plants with high winter survival and those with lower winter survival. RNA-Seq was performed on harvested materials. Initial analysis suggests that plants with lowered winter survival experience a greater level of cellular stress in dormant tissues. This aspect of plant function is being probed in greater depth. Objective 3 results: A total of 592 individual clones with three clonal replications in a randomized complete block design from each of five populations used in Objective 1 studies were rated for heading date in 2012 and 2014, green-up day of year in 2013, anthesis date in 2012, and yield in 2012, they were also subjected to NIR spectroscopy to derive cell wall composition estimates based on prior NIR calibrations. Plants were genotyped via a genotyping by sequencing (GBS) approach from reduced representation libraries constructed with adaptors that identified each individual. Libraries generated with the restriction enzyme PstI and called SNPs using Samtools after alignment to version 1.1 of the switchgrass genome sequence. A total of approximately 40,000 SNPs were found. These were then further filtered to eliminate markers with a minor allele frequency of < 0.05. The results of population analysis using STRUCTURE with expected population sizes or cluster numbers (K), clearly shows the hybrid composition of the KxS population and discriminated easily between upland (Summer) and lowland (Kanlow) populations. Under an assumption of 5 distinct populations there were detectable differences in allele frequencies between subpopulations within the three Kanlow populations particularly with respect to Kanlow EM and Kanlow base. We detected 110 SNPs with an allele frequency difference of ≥ 0.2 between Kanlow EM and Kanlow base populations, while 120 SNPs showed an allele frequency difference of ≥ 0.15 between Kanlow N1 and Kanlow base populations. These data are being readied for publication.

59 BASIC BIOLOGICAL SCIENCES↗