Search NASA⌕ Search

SEARCH · Search NASA

Results for “deviations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A method for predicting the noise levels of coannular jets with inverted velocity profiles

A coannular jet was equated with a single stream equivalent jet with the same mass flow, energy, and thrust. The acoustic characteristics of the coannular jet were then related to the acoustic characteristics of the single jet. Forward flight effects were included by incorporating a forward exponent, a Doppler amplification factor, and a Strouhal frequency shift. Model test data, including 48 static cases and 22 wind tunnel cases, were used to evaluate the prediction method. For the static cases and the low forward velocity wind tunnel cases, the spectral mean square pressure correlation coefficients were generally greater than 90 percent, and the spectral sound pressure level standard deviation were generally less than 3 decibels. The correlation coefficient and the standard deviation were not affected by changes in equivalent jet velocity. Limitations of the prediction method are also presented.

Russell, J. W.↗

Instrument error analysis as it applies to wind-tunnel testing

Errors resulting from the instrumentation used to measure wind tunnel model parameters are analyzed. The pertinent parameters, their standard deviations, and the theoretical derivation of them, are given. Some BASIC programs and plots for the standard deviations of dynamic pressure, Mach number, and Reynolds number are included.

Rind, E.↗

A theoretical analysis of simulated transonic boundary layers in cryogenic-nitrogen wind tunnels

A theoretical analysis was made to determine the real gas effects on simulation of transonic boundary layers in wind tunnels with cryogenic nitrogen as the test gas. The analysis included laminar and turbulent flat plate boundary layers and turbulent boundary layers on a two dimensional airfoil. The results indicate that boundary layers in such wind tunnels should not be substantially different from ideal gas boundary layers at standard conditions. At a pressure of 9.0 atm, two separate effects produce deviations of real gas values from ideal gas values which are in the opposite direction from deviations at 1.0 atm and are of the same insignificant order of magnitude. Results also show that nonadiabatic boundary layers should be adequately simulated if the enthalpy ratio is the correlating parameter rather than the temperature ratio.

Adcock, J. B.↗

Analysis of Vibratory Excitation of Gear Systems as a Contributor to Aircraft Interior Noise

Application of the transfer function approach to predict the resulting interior noise contribution requires gearbox vibration sources and paths to be characterized in the frequency domain. Tooth-face deviations from perfect involute surfaces were represented in terms of Legendre polynomials which may be directly interpreted in terms of tooth-spacing errors, mean and random deviations associated with involute slope and fullness, lead mismatch and crowning, and analogous higher-order components. The contributions of these components to the spectrum of the static transmission error is discussed and illustrated using a set of measurements made on a pair of helicopter spur gears. The general methodology presented is applicable to both spur and helical gears.

Mark, W. D.↗

Application of functional analysis to perturbation theory of differential equations

The deviation of the solution of the differential equation y' = f(t, y), y(O) = y sub O from the solution of the perturbed system z' = f(t, z) + g(t, z), z(O) = z sub O was investigated for the case where f and g are continuous functions on I x R sup n into R sup n, where I = (o, a) or I = (o, infinity). These functions are assumed to satisfy the Lipschitz condition in the variable z. The space Lip(I) of all such functions with suitable norms forms a Banach space. By introducing a suitable norm in the space of continuous functions C(I), introducing the problem can be reduced to an equivalent problem in terminology of operators in such spaces. A theorem on existence and uniqueness of the solution is presented by means of Banach space technique. Norm estimates on the rate of growth of such solutions are found. As a consequence, estimates of deviation of a solution due to perturbation are obtained. Continuity of the solution on the initial data and on the perturbation is established. A nonlinear perturbation of the harmonic oscillator is considered a perturbation of equations of the restricted three body problem linearized at libration point.

Bogdan, V. M.↗

On the VLBI-satellite laser ranging Iron Triangle intercomparison experiment

Simulations were performed to determine the suitability of the proposed station locations. The criterion was a comparison among the possible station configuration of the standard deviations of baseline and Earth rotation parameters estimated from a least squares covariance analysis. Only the relative magnitudes of the standard deviations were addressed in the analysis. Only random errors were assumed and no provision was made for systematic effects. The Iron Triangle, consisting of the stations at Westford (Haystack), Massachusetts, Owens Valley, California, and Ft. Davis, Texas, was regarded as the structure of the proposed network with options to incorporate either the Goldstone, California, or Green Bank, West Virginia, station or both. It was decided to include the Richmond, Florida, station in the analysis since it offered more North-South separation and therefore could strengthen the geometry of the network especially in the recovery of Earth rotation parameters.

Bock, Y.↗

Two-Way Time Transfer via Geostationary Satellites NRC/NBS, NRC/USNO and NBS/USNO via Hermes and NRC/LPTF (France) via Symphonie

In most of the experiments, 1 pps pulses of the station atomic clocks were exchanged between the partners, and a cubic equation was fitted to the 1000 to 2000 second measurements. The equations were exchanged and substracted to obtain the time difference of the stations. The standard deviation in the fit of the equations varied, depending on conditions, from 1.5 ns to 16 ns. For the last month of the Hermes experiment, a 1 MHz signal was used, giving a standard deviation of 0.18 ns. The comparison of the time scales via satellite and via Loran-C (BIH Circular D) show clearly that some Loran-C links are very good, but that the NBS link varies by 1 micron s. Via the satellite the frequencies of the time scales can be compared with an accuracy of 2 x 10 to the minus 14 power.

Costain, C.↗

Numerical analysis of natural convection in two-dimensional square and circular containers in low gravity

A numerical study of natural convection in circular cylinder and square enclosures shows that the analytic low Rayleigh number theory of previous investigators is valid for Rayleigh numbers up to 1000. For a Rayleigh number of 5000, steady state values of maximum fluid velocity differ by 20 percent. This deviation between analytic theory and numerical results increases for higher Rayleigh numbers. In addition, the low Rayleigh number theory is shown to be valid for higher Rayleigh numbers for a portion of the transient phase before significant deviation becomes apparent. It is also shown that square shaped experimental configurations may be analytically approximated with good accuracy by circular cylinders of equal cross sectional area for the prediction of convection velocities and flow patterns at low Rayleigh number.

Robertson, S. J.↗

Multi-year slant path rain fade statistics at 28.56 and 19.04 GHz for Wallops Island, Virginia

Multiyear rain fade statistics at 28.56 GHz and 19.04 GHz were compiled for the region of Wallops Island, Virginia covering the time periods, 1 April 1977 through 31 March 1978, and 1 September 1978 through 31 August 1979. The 28.56 GHz attenuations were derived by monitoring the beacon signals from the COMSTAR geosynchronous satellite, D sub 2 during the first year, and satellite, D sub 3, during the second year. Although 19.04 GHz beacons exist aboard these satellites, statistics at this frequency were predicted using the 28 GHz fade data, the measured rain rate distribution, and effective path length concepts. The prediction method used was tested against radar derived fade distributions and excellent comparisons were noted. For example, the rms deviations between the predicted and test distributions were less than or equal to 0.2dB or 4% at 19.04 GHz. The average ratio between the 28.56 GHz and 19.04 GHz fades were also derived for equal percentages of time resulting in a factor of 2.1 with a .05 standard deviation.

Goldhirsh, J.↗

Analysis of the vibratory excitation of gear systems. II - Tooth error representations, approximations, and application

The second part of a theory for predicting the vibratory excitation of gear systems from fundamental descriptions of gear tooth elastic properties and deviations of tooth faces from perfect involute surfaces is presented. The first part of the theory provides expressions for the Fourier-series coefficients of the vibratory excitation, and this paper gives expressions for these Fourier-series coefficients in terms of easily interpreted gear tooth metrics that are readily evaluated from tooth-face measurements. Results are given for rectangular tooth-face contact regions using two-dimensional Legendre polynomial expansions of local tooth-pair stiffnesses and stiffness-weighted deviations of tooth faces from perfect involute surfaces. A rigorous transfer function approach is developed that permits separation of the effects of gear tooth errors and gear design parameters; the theory is applicable to helical and spur gears and is illustrated with measurements of tooth-spacing errors and tooth profiles obtained from a pair of spur gears.

Mark, W. D.↗

Observability of the neutrino flux from the inner region of the galactic disk

The observability of galactic neutrinos in a detector of 10 to the 10th tons of water with an observing time of a few years is explored. Although the atmospheric flux exceeds the galactic flux considerably at energies greater than or equal to 1 TeV, the latter may still provide a marginally observable signal owing to its directionality. Galactic muon neutrinos with energy greater than approximately 1 TeV will produce a signal approximately two standard deviations above the atmospheric background over a four year period. If electron neutrinos can also be studied with DUMAND, then galactic electron neutrinos above 1 TeV would give an approximately four to five standard deviations signal above the electron neutrino background over a four-year integration time.

Silberberg, R.↗

Simultaneous X-ray and optical observations of the 7.7 second X-ray pulsar 4U 1626-67

Simultaneous X-ray and optical observations of the 7.7-s X-ray pulsar 4U 1626-67, obtained during May 29-31, 1978, reveal the presence of (1) intense, correlated optical and X-ray flares and (2) 7.7-s optical pulsations which agree in phase with the 1-3 keV X-ray pulsations to within 0.5 s (two standard deviations) and which agree in period to within 0.001 s (one standard deviation). From these data it is concluded that a substantial fraction (a minimum of 8%) and possibly all of the optical emission is produced from within approximately 0.5 light sec or 1.5 x 10 to the 10th cm of the neutron star. Furthermore, the data rule out the possibility that this optical emission comes from the X-ray heated surface of a degenerate or nondegenerate dwarf companion. It most likely comes from an accretion disk.

Mcclintock, J. E.↗

HEAO 1 observations of active coronae in main-sequence and subgiant stars

The HEAO 1 data has been searched for evidence of X-ray emission from 105 bright late-type stars of luminosity classes IV and V, selected on the basis of indirect optical evidence of the presence of a hot corona. Six of the target stars were detected at the 3-standard deviation level and 15 were coincident with 2-standard deviation X-ray sources. On a statistical basis no more than 5 of these 21 sources are spurious, and the probability that the identification with the class of active chromosphere stars is spurious is less than 0.00001. The sources lie near a line of X-ray/bolometric luminosity ratio = 0.0001, similar to a solar plage, and it is concluded that the most active coronae of late-type stars which are not members of close binary systems are being observed. The RS CVn systems discovered to date seem to form a distinct class of coronal X-ray sources, but the lowest X-ray luminosity members of the group, of which Capella may be the prototype, appear to overlap the domain of these single stars with active coronae. The data do not fit the coronal model of Gorenstein and Tucker (1976), but they are consistent with the coronal loop model of Rosner et al. (1978) as extended by Walter et al. (1980).

Walter, F. M.↗

Stellar atmosphere in statistical equilibrium

A static atmosphere with only Lyman continuum radiation in radiative equilibrium is studied for the effects of radiative and collisional ionization on deviations from local thermodynamic equilibrium (LTE). Large increases and decreases of the kinetic temperature (range in T of about factor 2) and, correspondingly, very large over- and underpopulation of the bound state (range in b of about factor 1,000,000) are found, depending on the frequency dependence of the photoionization cross section. Despite these large deviations from LTE, which strongly modify the emergent spectrum, there is almost no effect on the particle densities, the degree of ionization, and the basic structure of the atmosphere.

Kalkofen, W.↗

Time-dependent gravity in Southern California, May 1974 to April 1979

The Southern California gravity survey, begun in May 1974 to obtain high spatial and temporal density gravity measurements to be coordinated with long-baseline three dimensional geodetic measurements of the Astronomical Radio Interferometric Earth Surveying project, is presented. Gravity data was obtained from 28 stations located in and near the seismically active San Gabriel section of the Southern California Transverse Ranges and adjoining San Andreas Fault at intervals of one to two months using gravity meters relative to a base station standard meter. A single-reading standard deviation of 11 microGal is obtained which leads to a relative deviation of 16 microGal between stations, with data averaging reducing the standard error to 2 to 3 microGal. The largest gravity variations observed are found to correlate with nearby well water variations and smoothed rainfall levels, indicating the importance of ground water variations to gravity measurements. The largest earthquake to occur during the survey, which extended to April, 1979, is found to be accompanied in the station closest to the earthquake by the largest measured gravity changes that cannot be related to factors other than tectonic distortion.

Whitcomb, J. H.↗

Determination of wind from NIMBUS 6 satellite sounding data

Objective methods of computing upper level and surface wind fields from NIMBUS 6 satellite sounding data are developed. These methods are evaluated by comparing satellite derived and rawinsonde wind fields on gridded constant pressure charts in four geographical regions. Satellite-derived and hourly observed surface wind fields are compared. Results indicate that the best satellite-derived wind on constant pressure charts is a geostrophic wind derived from highly smoothed fields of geopotential height. Satellite-derived winds computed in this manner and rawinsonde winds show similar circulation patterns except in areas of small height gradients. Magnitudes of the standard deviation of the differences between satellite derived and rawinsonde wind speeds range from approximately 3 to 12 m/sec on constant pressure charts and peak at the jet stream level. Fields of satellite-derived surface wind computed with the logarithmic wind law agree well with fields of observed surface wind in most regions. Magnitudes of the standard deviation of the differences in surface wind speed range from approximately 2 to 4 m/sec, and satellite derived surface winds are able to depict flow across a cold front and around a low pressure center.

Carle, W. E.↗

Atmospheric structure determined from satellite data

The capabilities of the Nimbus 6 satellite sounding data for use in synoptic analysis were considered and interpreted. An evaluation of the ability of the satellite sounding data to detect and depict structural features of the atmosphere was made on the basis of vertical profiles of average difference and standard deviation of differences between satellite and rawinsonde data at nine pressure levels from 850 to 100 mb; and constant pressure charts and cross sections of satellite, rawinsonde and difference values. Results indicate that satellite measurements of temperature as well as the vertical lapse rate and horizontal gradient of temperature are accurate enough to show large scale patterns but not to precisely define fronts or tropopauses; satellite measurements of dew point temperature are smoothed enough to severely reduce contrasts between air masses across fronts; the magnitude of the standard deviation of differences between rawinsonde and satellite data for most variables increases with the synoptic activity in the region; and the most reliable variables to examine from satellite data for depiction of synoptic features are the temperature equivalent potential temperature and mixing ratio.

Knight, K. S.↗

Prediction of initiation of low and high explosive fillers due to fragment or projectile impact

A methodology is presented which provides predictions for the probability of initiation of explosion in high explosive filled warheads and in propellant filled rocket motor cases given the impact of compact fragments or of small projectiles. Equations of velocities at which 50 percent of the explosive filled cases will initiate either high or low order are developed for compact fragments, and for projectiles. These data are used to establish the standard deviation of the data from the 50 percent initiation line. Standard deviation is used to provide predictions of the probability of initiation given the impact velocity and other pertinent parameters using equations and logic which are established in a computer model. This computer model uses fragment material properties and encounter parameters to predict fragment impact initiation, and projectile and casing material properties and encounter parameters to predict projectile impact initiation.

Zabel, P. H.↗