Search NASA⌕ Search

SEARCH · Search NASA

Results for “discrete element method,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Aeroelastic modeling of swept tip rotor blades using finite elements

A special finite element for the modeling of a swept tip rotor blade is derived. The swept tip blade undergoes moderate deflections in flap, lag and torsion. The nonlinear, partial differential equations of motion are discretized using a Galerkin finite element method. Tip sweep introduces flap-torsion and lag-axial couplings, and may lead to aeroelastic instabilities associated with frequency coalescence. When frequency coalescence does not occur, sweep is usually stabilizing. A comparison of the approximate model of a swept tip blade, using a blade with straight elastic axis and offsets of aerodynamic centers of gravity, with the exact swept tip model developed in this paper indicates that the approximate model can produce inaccurate results for the case of hingeless rotor blades.

Celi, R.↗

Aeroelastic effects on stability and control of hingeless rotor helicopters

The combined effect of torsional flexibility and offset of the aerodynamic center relative to the elastic axis on the stability and control of a hingeless rotor helicopter in forward flight is studied in this paper. The aeroelastic model of the blade is based on fully coupled flap-lag-torsion equations of motion, which include kinematic nonlinearities due to moderate deflections. The equations are discretized using a finite element Galerkin method in space, and a classical Galerkin method in time. The vehicle trim calculations are coupled to the blade aeroelastic response calculations. Quasilinearization is used to compute aeroelastic stability. Reducing torsional stiffness and moving the elastic axis ahead of the aerodynamic center strongly stabilizes the phugoid mode without reducing control sensitivity. Aeroelastic stability calculations must accompany flight dynamics calculations to prevent aeroelastic instabilities that might easily go undetected.

Celi, Roberto↗

Simulation of Two-Fluid Flows by the Least-Squares Finite Element Method Using a Continuum Surface Tension Model

In this paper a numerical procedure for simulating two-fluid flows is presented. This procedure is based on the Volume of Fluid (VOF) method proposed by Hirt and Nichols and the continuum surface force (CSF) model developed by Brackbill, et al. In the VOF method fluids of different properties are identified through the use of a continuous field variable (color function). The color function assigns a unique constant (color) to each fluid. The interfaces between different fluids are distinct due to sharp gradients of the color function. The evolution of the interfaces is captured by solving the convective equation of the color function. The CSF model is used as a means to treat surface tension effect at the interfaces. Here a modified version of the CSF model, proposed by Jacqmin, is used to calculate the tension force. In the modified version, the force term is obtained by calculating the divergence of a stress tensor defined by the gradient of the color function. In its analytical form, this stress formulation is equivalent to the original CSF model. Numerically, however, the use of the stress formulation has some advantages over the original CSF model, as it bypasses the difficulty in approximating the curvatures of the interfaces. The least-squares finite element method (LSFEM) is used to discretize the governing equation systems. The LSFEM has proven to be effective in solving incompressible Navier-Stokes equations and pure convection equations, making it an ideal candidate for the present applications. The LSFEM handles all the equations in a unified manner without any additional special treatment such as upwinding or artificial dissipation. Various bench mark tests have been carried out for both two dimensional planar and axisymmetric flows, including a dam breaking, oscillating and stationary bubbles and a conical liquid sheet in a pressure swirl atomizer.

Wu, Jie↗

Multifunctional Collaborative Modeling and Analysis Methods in Engineering Science

Engineers are challenged to produce better designs in less time and for less cost. Hence, to investigate novel and revolutionary design concepts, accurate, high-fidelity results must be assimilated rapidly into the design, analysis, and simulation process. This assimilation should consider diverse mathematical modeling and multi-discipline interactions necessitated by concepts exploiting advanced materials and structures. Integrated high-fidelity methods with diverse engineering applications provide the enabling technologies to assimilate these high-fidelity, multi-disciplinary results rapidly at an early stage in the design. These integrated methods must be multifunctional, collaborative, and applicable to the general field of engineering science and mechanics. Multifunctional methodologies and analysis procedures are formulated for interfacing diverse subdomain idealizations including multi-fidelity modeling methods and multi-discipline analysis methods. These methods, based on the method of weighted residuals, ensure accurate compatibility of primary and secondary variables across the subdomain interfaces. Methods are developed using diverse mathematical modeling (i.e., finite difference and finite element methods) and multi-fidelity modeling among the subdomains. Several benchmark scalar-field and vector-field problems in engineering science are presented with extensions to multidisciplinary problems. Results for all problems presented are in overall good agreement with the exact analytical solution or the reference numerical solution. Based on the results, the integrated modeling approach using the finite element method for multi-fidelity discretization among the subdomains is identified as most robust. The multiple-method approach is advantageous when interfacing diverse disciplines in which each of the method's strengths are utilized. The multifunctional methodology presented provides an effective mechanism by which domains with diverse idealizations are interfaced. This capability rapidly provides the high-fidelity results needed in the early design phase. Moreover, the capability is applicable to the general field of engineering science and mechanics. Hence, it provides a collaborative capability that accounts for interactions among engineering analysis methods.

Ransom, Jonathan B.↗

On Multifunctional Collaborative Methods in Engineering Science

Multifunctional methodologies and analysis procedures are formulated for interfacing diverse subdomain idealizations including multi-fidelity modeling methods and multi-discipline analysis methods. These methods, based on the method of weighted residuals, ensure accurate compatibility of primary and secondary variables across the subdomain interfaces. Methods are developed using diverse mathematical modeling (i.e., finite difference and finite element methods) and multi-fidelity modeling among the subdomains. Several benchmark scalar-field and vector-field problems in engineering science are presented with extensions to multidisciplinary problems. Results for all problems presented are in overall good agreement with the exact analytical solution or the reference numerical solution. Based on the results, the integrated modeling approach using the finite element method for multi-fidelity discretization among the subdomains is identified as most robust. The multiple method approach is advantageous when interfacing diverse disciplines in which each of the method's strengths are utilized.

Ransom, Jonathan B.↗

A Verified Conformal Decomposition Finite Element Method for Implicit, Many-Material Geometries

As computing power rapidly increases, quickly creating a representative and accurate discretization of complex geometries arises as a major hurdle towards achieving a next generation simulation capability. Component definitions may be in the form of solid (CAD) models or derived from 3D computed tomography (CT) data, and creating a surface-conformal discretization may be required to resolve complex interfacial physics. Furthermore, the Conformal Decomposition Finite Element Methods (CDFEM) has been shown to be an efficient algorithm for creating conformal tetrahedral discretizations of these implicit geometries without manual mesh generation.

97 MATHEMATICS AND COMPUTING↗

A new flux conserving Newton's method scheme for the two-dimensional, steady Navier-Stokes equations

A new numerical method is developed for the solution of the two-dimensional, steady Navier-Stokes equations. The method that is presented differs in significant ways from the established numerical methods for solving the Navier-Stokes equations. The major differences are described. First, the focus of the present method is on satisfying flux conservation in an integral formulation, rather than on simulating conservation laws in their differential form. Second, the present approach provides a unified treatment of the dependent variables and their unknown derivatives. All are treated as unknowns together to be solved for through simulating local and global flux conservation. Third, fluxes are balanced at cell interfaces without the use of interpolation or flux limiters. Fourth, flux conservation is achieved through the use of discrete regions known as conservation elements and solution elements. These elements are not the same as the standard control volumes used in the finite volume method. Fifth, the discrete approximation obtained on each solution element is a functional solution of both the integral and differential form of the Navier-Stokes equations. Finally, the method that is presented is a highly localized approach in which the coupling to nearby cells is only in one direction for each spatial coordinate, and involves only the immediately adjacent cells. A general third-order formulation for the steady, compressible Navier-Stokes equations is presented, and then a Newton's method scheme is developed for the solution of incompressible, low Reynolds number channel flow. It is shown that the Jacobian matrix is nearly block diagonal if the nonlinear system of discrete equations is arranged approximately and a proper pivoting strategy is used. Numerical results are presented for Reynolds numbers of 100, 1000, and 2000. Finally, it is shown that the present scheme can resolve the developing channel flow boundary layer using as few as six to ten cells per channel width, depending on the Reynolds number.

Scott, James R.↗

Matrix-free subcell residual distribution for Bernstein finite elements: Monolithic limiting

This paper is focused on the aspects of limiting in residual distribution (RD) schemes for high-order finite element approximations to advection problems. Both continuous and discontinuous Galerkin methods are considered in this work. Discrete maximum principles are enforced using algebraic manipulations of element contributions to the global nonlinear system. The required modifications can be carried out without calculating the element matrices and assembling their global counterparts. The components of element vectors associated with the standard Galerkin discretization are manipulated directly using localized subcell weights to achieve optimal accuracy. Low-order nonlinear RD schemes of this kind were originally developed to calculate local extremum diminishing predictors for flux-corrected transport (FCT) algorithms. In the present paper, we incorporate limiters directly into the residual distribution procedure, which makes it applicable to stationary problems and leads to well-posed nonlinear discrete problems. To circumvent the second-order accuracy barrier, the correction factors of monolithic limiting approaches and FCT schemes are adjusted using smoothness sensors based on second derivatives. Finally, the convergence behavior of presented methods is illustrated by numerical studies for two-dimensional test problems.

97 MATHEMATICS AND COMPUTING↗

Simulation of coupled multiphase flow and geomechanics in porous media with embedded discrete fractures

In fractured natural formations, the equations governing fluid flow and geomechanics are strongly coupled. Hydrodynamical properties depend on the mechanical configuration, and they are therefore difficult to accurately resolve using uncoupled methods. In recent years, significant research has focused on discretization strategies for these coupled systems, particularly in the presence of complicated fracture network geometries. In this work, we explore a finite-volume discretization for the multiphase flow equations coupled with a finite-element scheme for the mechanical equations. Fractures are treated as lower dimensional surfaces embedded in a background grid. Interactions are captured using the embedded discrete fracture model (EDFM) and the embedded finite element method (EFEM) for the flow and the mechanics, respectively. This nonconforming approach significantly alleviates meshing challenges. EDFM considers fractures as lower dimension finite volumes that exchange fluxes with the rock matrix cells. The EFEM method provides, instead, a local enrichment of the finite-element space inside each matrix cell cut by a fracture element. Both the use of piecewise constant and piecewise linear enrichments are investigated. They are also compared to an extended finite element approach. One key advantage of EFEM is the element-based nature of the enrichment, which reduces the geometric complexity of the implementation and leads to linear systems with advantageous properties. Synthetic numerical tests are presented to study the convergence and accuracy of the proposed method. It is also applied to a realistic scenario, involving a heterogeneous reservoir with a complex fracture distribution, to demonstrate its relevance for field applications.

58 GEOSCIENCES↗

Diffusion Synthetic Acceleration for High Order S{sub N} Transport on Meshes with Curved Surfaces

Thermal radiation transport is integral to multiphysics applications such as inertial confinement fusion and astrophysics. Materials in these problems can be exceptionally optically thick and diffusive. A transport solver must be capable of accurate and efficient solutions to such problems. Previously, Woods et al. established a proof-of-concept for high order (HO) discontinuous Galerkin finite element (DGFEM) transport on meshes with curved surfaces. They numerically demonstrated the spatial convergence is order p + 1. Remarkably, these convergence rates are relatively invariant to the amount of curvature of the spatial mesh. We present here an extension of this work that demonstrates a rapidly-convergent iterative solver for the FEM transport equations on meshes with curved sides. We use the modified interior penalty (MIP) diffusion synthetic acceleration (DSA) established by Wang and Ragusa. The partially consistent MIP equations stem from the symmetric interior penalty (IP) derivation of the diffusion equation. The IP method is not stable for optically thick cells so it was combined with the diffusion conforming form (DCF), a discretized diffusion equation derived from the discretized S N equations that is not stable for intermediate optical thicknesses. The MIP equations adapt a 'switch' to the IP method in optically thinner regions and the DCF method in optically thicker regions. The literature does not reveal any Fourier analyses performed for iterative transport on meshes with curved surfaces. Wang and Ragusa performed a Fourier analysis for orthogonal meshes and our results appear to be as expected. Previous literature has reported on some of the sensitivities that affect the spectral radius of DSA schemes: polynomial order, and scattering ratios. Presently, we focus on the sensitivity of the spectral radius to polynomial order, scattering ratio, the constant C, and mesh curvature for varying cell thicknesses. We also numerically study the behavior of the spectral radius to verify our DSA implementation. A sequence of problems is designed to exercise the acceleration. As the problems become more optically thick and diffusive, the accelerated solution continues to converge toward the analytic solution. We employ the Modular Finite Element Methods (MFEM) package, developed at Lawrence Livermore National Laboratory, to generate the linear algebraic system of equations for each angle in the discrete ordinates quadrature set, and use UMFPack to solve this system of equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Geometry and Joint Systems for Lattice-Based Reconfigurable Space Structures

We describe analytical methods for the design of the discrete elements of ultralight lattice structures. This modular, building block strategy allows for relatively simple element manufacturing, as well as relatively simple robotic assembly of low mass density structures on orbit, with potential for disassembly and reassembly into highly varying and large structures. This method also results in a structure that is easily navigable by relatively small mobile robots. The geometry of the cell can allow for high packing efficiency to minimize wasted payload volume while maximizing structural performance and constructability. We describe the effect of geometry choices on the final system mechanical properties, manufacturability of the components, and automated robotic constructability of a final system. Geometry choices considered include building block complexity, symmetry of the unit cell, and effects of vertex, edge, and face connectivity of the unit cell. Mechanical properties considered include strength scaling, modulus scaling, and structural performance of the joint, including proof load, shear load, mass, and loading area; as well as validation and verification opportunities. Manufacturability metrics include cost and time, manufacturing method (COTS versus custom), and tolerances required. Automated constructability metrics include local effects of loads imparted to the structure by the robot and assembly complexity, encompassing the ability of the robot to clamp and number of placement motions needed for assembly.

Ochalek, Megan E.↗

Geometry Systems for Lattice-Based Reconfigurable Space Structures

We describe analytical methods for the design of the discrete elements of ultralight lattice structures. This modular, building block strategy allows for relatively simple element manufacturing, as well as relatively simple robotic assembly of low mass density structures on orbit, with potential for disassembly and reassembly into highly varying and large structures. This method also results in a structure that is easily navigable by relatively small mobile robots. The geometry of the cell can allow for high packing efficiency to minimize wasted payload volume while maximizing structural performance and constructability. We describe the effect of geometry choices on the final system mechanical properties and automated robotic constructability of a final system. Geometric properties considered include number of attachments per voxel, number of attachments per coefficient of volume, and effects of vertex, edge, and face connectivity of the unit cell. Mechanical properties considered include strength scaling, modulus scaling, and packing efficiency of the lattice. Automated constructibility metrics include volume allowance for an end-effector, strut clearance angle for an end-effector, and packing efficiency. These metrics were applied to six lattice unit cell geometries: cube, cuboctahedron, octahedron, octet, rhombic dodecahedron, and truncated octahedron. A case study is presented to determine the most suitable lattice system for a specific set of strength and modulus scaling requirements while optimizing for ease of robotic assembly.

lattice geometry↗

Geometry Systems for Lattice-Based Reconfigurable Space Structures

We describe analytic methods for the design of the discrete elements of ultralight lattice structures. This modular building block strategy allows for relatively simple element manufacturing as well as relatively simple robotic assembly of low mass-density structures on orbit, with potential for disassembly and reassembly into highly varying and large structures. This method also results in a structure that is easily navigable by relatively small, mobile robots. The geometry of the cell can allow for high packing efficiency to minimize wasted payload volume while maximizing structural performance and constructability. We describe the effect of geometry choices on the mechanical properties and automated robotic constructability of a final system. Geometric properties considered include number of attachments per voxel, number of attachments per coefficient of volume, and effects of vertex, edge, and face connectivity of the unit cell. Mechanical properties considered include strength scaling, modulus scaling, and packing efficiency of the lattice. Automated constructibility metrics include volume allowance for an end-effector, strut clearance angle for an end-effector, and packing efficiency. These metrics were applied to six lattice unit cell geometries: cube, cuboctahedron, octahedron, octet, rhombic dodecahedron, and truncated octahedron. A case study is presented to determine the most suitable lattice system for a specific set of strength and modulus scaling requirements while optimizing for ease of robotic assembly.

digital materials↗

Conservative discretization of the Landau collision integral

Here we describe a density, momentum-, and energy-conserving discretization of the nonlinear Landau collision integral. The method is suitable for both the finite-element and discontinuous Galerkin methods and does not require structured meshes. The conservation laws for the discretization are proven algebraically and demonstrated numerically for an axially symmetric nonlinear relaxation problem using a finite-element implementation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantifying the Uncertainty in Deterministic Phonon Transport Calculations of Thermal Conductivity using Polynomial Chaos Expansions

The nature of computational simulations requires the inclusion of an uncertainty analysis, as we have limited knowledge of all physically determined input parameters for a computationally simulated problem. We rely on uncertainty quantification (UQ) to characterize our confidence in the outcomes. Quantifying uncertainty can provide a basis for certifications in high-consequence decisions, such as nuclear reactor design, and is a fundamental component of model validation. We employ a previously developed method of uncertainty quantification, polynomial chaos expansion with stochastic collocation (PCE-SC), applied to deterministic phonon transport simulations. In these simulations, we use the neutron transport code Rattlesnake, which solves the Self-Adjoint Angular Flux (SAAF) formulation of the transport equation with a continuous finite element (CFEM) spatial discretization and discrete ordinates, spherical harmonics angular discretizations. Rattlesnake was developed in the multi-physics object oriented simulation environment (MOOSE) framework. We have previously shown Rattlesnake to be effective in simulating phonon transport. We aim to provide a deterministic phonon transport framework for heterogeneous nuclear fuel with fission product defects to predict thermal conductivity (?). A first principles, physics-based calculation of thermal conductivity must involve factors such as the microstructure of nuclear fuel, which constantly changes during the fission process through the formation of isotopic decay products. Heat transport in oxide nuclear fuels is dominated by phonon transport. Impurities in the bulk material influence the transport of energy at the fundamental level, altering the scattering behavior of phonons and electrons. Conventionally, heat transport follows classical physics based on the heat equation derived from Fourier's law q = -k∇T, where q is heat flux, k is thermal conductivity and ∇T is a temperature gradient. However, Fourier's law is a macroscopic empirical law in which the thermal conductivity? does not have a mechanistic connection to the underpinning heat transport processes. Thermal conductivity of a material depends both on the material's intrinsic ability to transport heat and a variety of resistive effects caused by defects in the material. Thus ab initio prediction of the macroscopic conductivity - the property of interest for safe reactor operation - requires simulating detailed processes of heat transport, and then determining the effective thermal conductivity of the simulated material from the resulting heat flux under the imposed temperature difference. The thermal conductivity of a bulk, homogeneous, dielectric material can be well estimated by the mechanistically derived expression: k{sub bulk} = 1/3 C{sub ν}νgλ (2), where C{sub ν}, νg, and λ are the volumetric specific heat, phonon speed, and phonon mean free path, respectively. In these problems the relevant parameter is the material's acoustic thickness, its characteristic distance L relative to the phonon mean free path λ. In Eq. (2) the largest source of uncertainty is λ. While propagating uncertainty in λ to uncertainty in k through Eq. (2) is trivial, systems with extrinsic scattering require more sophisticated approaches. At the microscopic level, uncertainty in λ changes both a material's intrinsic thermal conductivity. Our goal is to propagate the uncertainty in λ through the deterministic transport computation of k. Because there are a small number of uncertain input quantities, we use the method of polynomial chaos expansion (PCE), which expresses solutions in the form of spectral expansions of an uncertain variable. This approach combines both intrusive and nonintrusive methods of uncertainty propagation techniques and results in a unique formulation which is very effective and efficient for problems with few uncertain parameters. Uncertainty Quantification and Sensitivity Analysis We use PCE-SC to measure propagation of uncertainty in a 3-D phonon transport problem of homogeneous silicon, to compute the mean and variance in temperature, heat flux and thermal conductivity. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nondirect product discrete variable representation in multidimensional quantum problems

We have developed a method for treating different quantum few-body dynamics without traditional partial-wave analysis. The key element of the method is a nondirect product discrete variable representation (npDVR) we have suggested and developed in application to the time-dependent mutidimensional Schroedinger equations. It happened that this approach was very efficient in quantitative analysis of low-dimensional ultracold few-body systems arising in confined geometry of atomic traps. As an example, we consider the numerical analysis of the four-dimensional Schroedinger equation describing the resonant molecule formation in confined two-component atomic mixture with transferring the energy release to the center-ofmass excitation of forming molecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compressible turbulent flow simulation with a multigrid multiblock method

We describe a multigrid multiblock method for compressible turbulent flow simulations and present results obtained from calculations on a two-element airfoil. A vertex-based spatial discretization method and explicit multistage Runge-Kutta time-stepping are used. The slow convergence of a single grid method makes the multigrid method, which yields a speed factor of about 20, indispensable. The numerical predictions are in good agreement with experimental results. It is shown that the convergence of the multigrid process depends considerably on the ordering of the various loops. If the block loop is put inside the stage loop, the process converges more rapidly than if the block loop is situated outside the stage loop when a three-stage Runge-Kutta method is used. If a five-stage scheme is used, the process does not converge in the latter block ordering. Finally, the process based on the five-stage method is about 60 percent more efficient than with the three-stage method, if the block loop is inside the stage loop.

Kuerten, Hans↗

GEMPIC: geometric electromagnetic particle-in-cell methods

We present a novel framework for finite element particle-in-cell methods based on the discretization of the underlying Hamiltonian structure of the Vlasov–Maxwell system. We derive a semi-discrete Poisson bracket, which retains the defining properties of a bracket, anti-symmetry and the Jacobi identity, as well as conservation of its Casimir invariants, implying that the semi-discrete system is still a Hamiltonian system. In order to obtain a fully discrete Poisson integrator, the semi-discrete bracket is used in conjunction with Hamiltonian splitting methods for integration in time. Techniques from finite element exterior calculus ensure conservation of the divergence of the magnetic field and Gauss’ law as well as stability of the field solver. The resulting methods are gauge invariant, feature exact charge conservation and show excellent long-time energy and momentum behaviour. Due to the generality of our framework, these conservation properties are guaranteed independently of a particular choice of the finite element basis, as long as the corresponding finite element spaces satisfy certain compatibility conditions.

Physics↗