Search NASA⌕ Search

SEARCH · Search NASA

Results for “effective turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Control and Identification of Turbulent Boundary Layer Separation

Effective delay of turbulent boundary layer separation could be achieved via closed-loop control. Constructing such a system requires that sensor data be processed, real-time, and fed into the controller to determine the output. Current methods for detection of turbulent boundary layer separation are lacking the capability of localized, fast and reliable identification of the boundary layer state. A method is proposed for short-time FFT processing of time series, measured by hot-film sensors, with the purpose of identifying the alternation of the balance between small and large scales as the boundary layer separates, favoring the large scales. The method has been validated by comparison to other criteria of separation detection and over a range of baseline and controlled flow conditions on a simplified high-lift system, incorporating active flow control.

Seifert, Avi↗
DOE OSTI2023

Late-time post-merger modeling of a compact binary: effects of relativity, r-process heating, and treatment of transport

Detectable electromagnetic counterparts to gravitational waves from compact binary mergers can be produced by outflows from the black hole-accretion disk remnant during the first 10 s after the merger. Two-dimensional axisymmetric simulations with effective viscosity remain an efficient and informative way to model this late-time post-merger evolution. In addition to the inherent approximations of axisymmetry and modeling turbulent angular momentum transport by a viscosity, previous simulations often make other simplifications related to the treatment of the equation of state and turbulent transport effects. In this paper, we test the effect of these modeling choices. By evolving with the same viscosity the exact post-merger initial configuration previously evolved in Newtonian viscous hydrodynamics, we find that the Newtonian treatment provides a good estimate of the disk ejecta mass but underestimates the outflow velocity. We find that the inclusion of heavy nuclei causes a notable increase in ejecta mass. An approximate inclusion of r-process effects has a comparatively smaller effect, except for its designed effect on the composition. Diffusion of composition and entropy, modeling turbulent transport effects, has the overall effect of reducing ejecta mass and giving it a speed with lower average and more tightly-peaked distribution. Also, we find significant acceleration of outflow even at distances beyond 10 000 km, so that thermal wind velocities only asymptote beyond this radius and at higher values than often reported.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1987

An analysis of the crossover between local and massive separation on airfoils

Massive separation on airfoils operating at high Reynolds number is an important problem to the aerodynamicist, since its onset generally determines the limiting performance of an airfoil, and it can lead to serious problems related to aircraft control as well as turbomachinery operation. The phenomenon of crossover between local separation and massive separation on realistic airfoil geometries induced by airfoil thickness is investigated for low speed (incompressible) flow. The problem is studied both for the asymptotic limit of infinite Reynolds number using triple-deck theory, and for finite Reynolds number using interacting boundary-layer theory. Numerical results are presented which follow the evolution of the flow as it develops from a mildly separated state to one dominated by the massively separated flow structure as the thickness of the airfoil geometry is systematically increased. The effect of turbulence upon the evolution of the flow is considered, and the impact is significant, with the principal effect being the suppression of the onset of separation. Finally, the effect of surface suction and injection for boundary-layer control is considered. The approach which was developed provides a valuable tool for the analysis of boundary-layer separation up to and beyond stall. Another important conclusion is that interacting boundary-layer theory provides an efficient tool for the analysis of the effect of turbulence and boundary-layer control upon separated vicsous flow.

Barnett, M.↗
NASA NTRS1976

The effects of aircraft design and atmospheric turbulence on handling and ride qualities

The effects of aircraft dynamic characteristics on passenger ride quality were investigated to determine ride-quality isocontours similar to aircraft handling-qualities contours. Measurements were made on a motion-base simulator while varying the aircraft short-period and Dutch Roll frequencies and dampings. Both pilot ratings and subjective ride-quality ratings were obtained during simulator flight. Ride and handling qualities were found to be complimentary for the Dutch Roll mode, but not for the short-period mode. Regions of optimal ride and handling qualities were defined for the short-period mode, and the effects of changes in turbulence level studied using mathematical models.

Jones, C. R.↗
NASA NTRS1984

On the Influence of Turbulent Motions on Non-radial Oscillations

The effect of turbulent motions on oscillations is studied, considering only the coupling between turbulent and oscillatory velocities. In this case, the turbulence affects the oscillations through the Reynolds stresses in the momentum equation for the pulsations. A simple model of turbulence is adopted to evaluate these Reynolds stresses and the perturbed eigenfrequencies are expressed as a function of certain averages of the turbulent velocities.

Durney, B. R.↗
DOE OSTI2026

Shear-free, inhomogeneous turbulence in a stably stratified fluid

High-resolution large eddy simulations are conducted of locally forced, shear-free turbulence in the presence of an initially sharp density interface. The simulations are reminiscent of oscillating grid turbulence experiments used to isolate the effect of turbulent diffusion and entrainment from background shear. By simulating such a flow we avoid common challenges of the experiments such as secondary-flow contamination due to sidewall effects and the inevitable interaction of the stratifying agent and forcing region. To address the latter concern, we add a heating term (potential energy sink) to the governing equations in the forcing layer, thereby preventing a heat flux through the source region. This modification sets up a continuous stratification in the mixed layer that is often assumed to be negligible in experiments. Despite this difference, we are able to make meaningful comparisons in terms of the overall entrainment rate, which varies as a power law with a turbulent Richardson number. Two exponents, −2 and −1, are measured depending on the definition of the Richardson number and entrainment rate used. The definition leading to −1 is consistent with most experiments, and we argue it is the superior choice if one is able to measure the relevant quantities. We also verify the self-similar scaling of turbulence velocity and length scales in the homogeneous fluid and propose ‘inner’ and ‘outer’ scalings for the stratified cases based on a local Froude number. The detailed scaling results are useful for turbulence model validation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Solar wind turbulence: Observations of MHD effects

Since the first in-situ observations it was realized that the solar wind is permeated by large-amplitude variations on a very extended range of scales. In this paper an overview of our present state of knowledge for fluctuations in the magnetohydrodynamic (MHD) regime is given. These fluctuations are an important component of the solar wind variability and notably contribute to the overall energy and momentum flux. They generally have a turbulent character and their amplitude is large enough to suggest the presence of nonlinear effects. In recent years the use of high time-resolution data on an extended range of heliocentric distances has allowed major steps towards a satisfactory understanding of the solar wind MHD fluctuations. Their radial evolution in the expanding wind has been determined through detailed analyses of the variations in their spectral features. correlations. and anisotropics. The role of interplanetary sources has been carefully investigated. The influence of interactions with structures convected by the solar wind has been examined. Fluctuations have been studied in the light of theories developed to draw together the effects of both incompressibility and compressibility. Increasing attention has been devoted to the intermittent character of the turbulence. Finally, very recent observations by Ulysses at high heliographic latitudes have allowed the first in-situ analysis of turbulence features in polar regions of the heliosphere.

Bavassano, B.↗
NASA NTRS1982

Convex curvature effects on the heated turbulent boundary layer

A convexly curved and isothermally heated wall with a 45-cm radius of curvature is subjected to turbulent boundary layer flow measurements in order to determine wall heat transfer rates and mean velocity and temperature profiles. Significant curvature effects are noted, with Stanton number and skin friction coefficient reductions of 35-40 percent by comparison with flat plate values for the same momentum or enthalpy thickness Reynolds numbers. Profiles of mean velocity and temperature show a more rapid growth of the wake regions, and a shortening of the log-linear region, as a result of curvature. Turbulent Prandtl numbers deduced from the mean temperature profiles under the assumption of a wall thermal law were found to be increased by 40-50 percent by this strong convex curvature.

Simon, T. W.↗
NASA NTRS1991

Free-stream turbulence and concave curvature effects on heated, transitional boundary layers

An experimental investigation of the transition process on flat-plate and concave curved-wall boundary layers for various free-stream turbulence levels was performed. Results show that for transition of a flat-plate, the two forms of boundary layer behavior, identified as laminar-like and turbulent-like, cannot be thought of as separate Blasius and fully-turbulent profiles, respectively. Thus, simple transition models in which the desired quantity is assumed to be an average, weighted on intermittency, of the theoretical laminar and fully turbulent values is not expected to be successful. Deviation of the flow identified as laminar-like from theoretical laminar behavior is shown to be due to recovery after the passage of a turbulent spot, while deviation of the flow identified as turbulent-like from the full-turbulent values is thought to be due to incomplete establishment of the fully-turbulent power spectral distribution. Turbulent Prandtl numbers for the transitional flow, computed from measured shear stress, turbulent heat flux and mean velocity and temperature profiles, were less than unity. For the curved-wall case with low free-stream turbulence intensity, the existence of Gortler vortices on the concave wall within both laminar and turbulent flows was established using liquid crystal visualization and spanwise velocity and temperature traverses. Transition was found to occur via a vortex breakdown mode. The vortex wavelength was quite irregular in both the laminar and turbulent flows, but the vortices were stable in time and space. The upwash was found to be more unstable, with higher levels of u' and u'v', and lower skin friction coefficients and shape factors. Turbulent Prandtl numbers, measured using a triple-wire probe, were found to be near unity for all post-transitional profiles, indicating no gross violation of Reynolds analogy. No evidence of streamwise vortices was seen in the high turbulence intensity case.

Kim, J.↗
NASA NTRS2022

The Effect of Solar Wind Turbulence on Parallel and Oblique Firehose Instabilities

We consider the firehose instability coexisting with the omnipresent ambient solar wind turbulence. The characteristic temporal and spatial scales of the turbulence are comparable to those of the instability. Therefore, turbulence may violate the common assumption of a uniform and stationary background used to describe instabilities and make the properties of the instabilities different. To investigate this effect, we perform threedimensional hybrid simulations with particle-in-cell ions and a quasi-neutralizing electron fluid. We find that the turbulence significantly reduces the growth rates and saturation levels of both instabilities. Comparing the cases with and without turbulence, the former results in a higher temperature anisotropy in the asymptotic marginally stable state at large times. In the former case, the distribution function averaged over the simulation box is also closer to the initial one.

S A Markovskii↗
NASA NTRS1993

Effects of detailed droplet heating models on turbulent sprays vaporization behavior

The effects of three different droplet heating models on the vaporization history and internal structure of turbulent liquid fuel sprays were investigated. The models considered were the infinite-diffusion, diffusion-limit, and effective-conductivity models. A numerical solution for the models was developed and implemented in the KIVA-II computer code. Low temperature and relatively high temperature numerical studies were conducted. The low temperature computations were compared with existing experimental data. The comparisons showed that while the infinite-diffusion and diffusion-limit models respectively overpredicted and underpredicted the fuel vapor peak concentration and distribution in the combustor, the effective-conductivity model gave results that were in better agreement with measurements. A limited study for the high temperature case was performed due to lack of experimental data and predictions using the three models were compared with each other.

Mawid, M. A.↗
NASA NTRS1983

Predictions of the structure of turbulent, particle-laden, round jets

Models of gas and particle motion in turbulent, particle-laden, round jets were evaluated using existing measurements of flow structure. Three models were considered: (1) a locally homogeneous flow model, where velocities and turbulent mixing properties of both phases were assumed to be equal; (2) a deterministic separated flow model, where interphase slip was considered but effects of turbulent dispersion were ignored; and (3) a stochastic separated flow model where effects of interphase slip and turbulent dispersion were considered using random sampling techniques. In all three cases, mean and turbulent properties of the continuous phase were found with a well-calibrated k-epsilon model. The locally homogeneous flow and deterministic separated flow models over- and underestimated particle spread and flow development rates, respectively. The stochastic separated flow model, however, yielded satisfactory predictions of flow structure - except at high particle loadings. Uncertainties in initial conditions for the measurements and possible effects of turbulence modulation by the particles are proposed as the reason for these errors.

Shuen, J.-S.↗
NASA NTRS1991

Free-stream turbulence and concave curvature effects on heated, transitional boundary layers, volume 1

An experimental investigation of the transition process on flat-plate and concave curved-wall boundary layers for various free-streem turbulence levels was performed. Where possible, sampling according to the intermittency function was made. Such sampling allowed segregation of the signal into two types of behavior: laminar-like and turbulent-like. The results from the investigation are discussed. Documentation is presented in two volumes. Volume one contains the text of the report including figures and supporting appendices. Volume two contains data reduction program listings and tabulated data.

Kim, J.↗
DOE OSTI2022

Peak Rain Rate Sensitivity to Observed Cloud Condensation Nuclei and Turbulence in Continental Warm Shallow Clouds During CACTI

Abstract Warm clouds strongly affect Earth's energy budget but remain imperfectly represented in climate models, partly due to the complexity and covariability of relevant processes influencing warm rain. This work presents a detailed analysis of different factors affecting rain rate peak intensity (RR) in continental warm clouds. Clouds were identified with vertically pointing radar and lidar observations and categorized via a temperature‐based cloud type classification algorithm from which warm clouds were isolated. Observations and retrievals of liquid water path (LWP), cloud condensation nuclei concentration (N CCN ), cloud depth, and cloud duration of more than 3,000 separate warm clouds sampled during the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign are analyzed in this work. Multiple linear regression (MLR) and random forest (RF) models are applied to assess the relative impact of these variables on RR. Overall, RR tends to increase as cloud depth, LWP, and cloud duration increase, or N CCN decreases. Cloud depth affects RR the most while N CCN impacts it the least. When considering over 170 warm clouds observed at least 1 hr in which in‐cloud turbulence is retrieved, the effect of N CCN on RR remains most likely suppressive, but it is not significant at a 75% level for MLR and is highly uncertain for RF. The impact of in‐cloud turbulence depends on the moment and location it is sampled. Cloud base turbulence around the time of RR suppresses RR, while cloud top turbulence effects are inconclusive. Possible difficulties in isolating robust CCN and turbulence effects on RR are discussed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Applications of spectral methods to turbulent magnetofluids in space and fusion research

Recent and potential applications of spectral method computation to incompressible, dissipative magnetohydrodynamics are surveyed. Linear stability problems for one dimensional, quasi-equilibria are approachable through a close analogue of the Orr-Sommerfeld equation. It is likely that for Reynolds-like numbers above certain as-yet-undetermined thresholds, all magnetofluids are turbulent. Four recent effects in MHD turbulence are remarked upon, as they have displayed themselves in spectral method computations: (1) inverse cascades; (2) small-scale intermittent dissipative structures; (3) selective decays of ideal global invariants relative to each other; and (4) anisotropy induced by a mean dc magnetic field. Two more conjectured applications are suggested. All the turbulent processes discussed are sometimes involved in current carrying confined fusion magnetoplasmas and in space plasmas.

Montgomery, D.↗
NASA NTRS1991

Preferential concentration of particles by turbulence

Direct numerical simulation of isotropic turbulence was used to investigate the effect of turbulence on the concentration fields of heavy particles. The hydrodynamic field was computed using 64-cubed points, and a statistically stationary flow was obtained by forcing the low-wave-number components of the velocity field. The particles used in the simulations were time advanced according to Stokes drag law and were also assumed to be much more dense than the fluid. Properties of the particle cloud were obtained by following the trajectories of 1,000,000 particles through the simulated flow fields. Three values of the ratio of the particle time constant to large-scale turbulence time scale were used in the simulations: 0.075, 0.15, and 0.52. The simulations show that the particles collect preferentially in regions of low vorticity and high strain rate. This preferential collection was most pronounced for particles with the instantaneous number density as much as 25 times the mean value. The fact that dense particles collect in regions of low vorticity and high strain in turn implies that turbulence may actually inhibit rather than enhance mixing of particles.

Squires, Kyle D.↗
NASA NTRS1991

Coherent laser radar performance for general atmospheric refractive turbulence

A general theory for the signal-to-noise ratio (SNR) of a coherent detection laser radar is developed using the path-integral formulation (Fresnel approximation), which is valid for any typical path-integrated atmospheric refractive turbulence. The principal effects of refractive turbulence are discussed, and analytical expressions are presented for the case of untruncated Gaussians for the transmitted field, local oscillator field, and transmitter/receiver optics. The physical mechanisms that reduce heterodyne efficiency are identified.

Frehlich, Rod G.↗