Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy conservation code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Measure Guideline: Basement Insulation Basics

This guideline is intended to describe good practices for insulating basements in new and existing homes, and is intended to be a practical resources for building contractors, designers, and also to homeowners. These flowcharts are provided as a very high-level overview of the planning and selection process for basement insulation systems. Note that these guidelines—and certainly these charts—are not exhaustive. Many references are provided that discuss several viable basement systems as well as achieving thermal performance well above code minimums.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

3D CFD Electrochemical and Heat Transfer Model of an Integrated-Planar Solid Oxide Electrolysis Cells

A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to assess hightemperature electrolysis performance of an Integrated Planar porous-tube-supported Solid Oxide Electrolysis Cell (IPSOEC). The model includes ten integrated planar cells in a segmented-in-series geometry deposited on a flattened ceramic support tube. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) module adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation over-potential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Contour plots of local electrolyte temperature, current density, and Nernst potential indicated the effects of heat transfer, endothermic reaction, Ohmic heating, and change in local gas composition. Results are discussed for using this design in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production is reported herein. Predictions show negative pressure in the H2 electrode, indicating a possible limit of H2O diffusion through the ceramic tube. Minimum temperatures occur in the fuel and air downstream corner of the ceramic tube for voltages below the thermal neutral point.

Source record↗

Compilation of CFD Models of Various Solid Oxide Electrolyzers Analyzed at the Idaho National Laboratory

Various three dimensional computational fluid dynamics (CFD) models of solid oxide electrolyzers have been created and analyzed at the Idaho National Laboratory since the inception of the Nuclear Hydrogen Initiative in 2004. Three models presented herein include: a 60 cell planar cross flow with inlet and outlet plenums, 10 cell integrated planar cross flow, and internally manifolded five cell planar cross flow. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) module adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation over-potential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Contour plots of local electrolyte temperature, current density, and Nernst potential indicated the effects of heat transfer, endothermic reaction, Ohmic heating, and change in local gas composition. Results are discussed for using these models in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production is reported herein. Contour plots and discussion show areas of likely cell degradation, flow distribution in inlet plenum, and flow distribution across and along the flow channels of the current collectors

08 HYDROGEN↗

Scaling Up to Zero Energy Ready - and Down to 530 ft2

There is a demonstrated need for affordable housing and smaller homes. Reduced square footage new construction projects present a solution for this growing need. Completion of these types of projects is not without challenges however, as high efficiency building measures present problems with proper equipment sizing and indoor environmental quality. This case study describes the support provided by FSEC to the Manatee County Habitat for Humanity to create a small footprint home design that qualifies for Zero Energy Ready Home (ZERH) certification in Florida. Specific measures to address equipment sizing challenges, and interior air quality targets are identified among other construction elements that contribute to qualifying for ZERH certification. Discussion of the approach to meeting these challenges is informative to other efforts to build to above code standards in hot humid climates, and other regions.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

Numerical modeling of laser tunneling ionization in explicit particle-in-cell codes

Methods for the calculation of laser tunneling ionization in explicit particle-in-cell codes used for modeling laser–plasma interactions are compared and validated against theoretical predictions. Improved accuracy is obtained by using the direct current form for the ionization rate. Multi level ionization in a single time step and energy conservation have been considered during the ionization process. The effects of grid resolution and number of macro-particles per cell are examined. Implementation of the ionization algorithm in two different particle-in-cell codes is compared for the case of ionization-based electron injection in a laser–plasma accelerator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vestibule Requirements in Commercial Buildings - Code Notes

The intent of the vestibule requirement is to reduce infiltration of air into a space, thereby addressing energy conservation and comfort issues for occupants located near primary entrance doors. The majority of infiltration comes through primary entrance doors that are typically used to access public areas, and have higher usage rates than doors classified for personnel use. Vestibules can reduce the infiltration losses (or gains) from wind and stack effects by creating an air lock entry.

Building air flow, building envelope, conditioned ↗

Verifying Ray Tracing Amplitude Methods for Global Magnetospheric Modeling

Abstract Ray tracing is a commonly used method for modeling the propagation of electromagnetic waves in Earth's magnetosphere. To apply ray tracing results to global models of wave‐particle interaction such as energetic electron scattering, it is useful to map the discrete rays to a volume filling mesh. However, some methods have inherent losses of energy from the wave source, or do not account for the full range of wave properties within a sample volume. We have developed and tested a 3D magnetospheric ray tracing code “MESHRAY” which resolves these issues. MESHRAY uses the conservation of Poynting flux through ray triplets with finite volume to determine the local field amplitudes. Electromagnetic wave energy density from all ray data points is mapped to a mesh and verified against the wave source power for energy conservation varying time step length, number of rays, and total time steps. We find that the method is self‐consistent and numerically robust. We further investigate whether the neglect of phase information and superposition has a significant impact on the accuracy of mapping wave intensity to a mesh. We find excellent agreement between the analytic solution for waves emitted by a line source in a plane‐stratified medium and an equivalent ray tracing solution. When phase information is excluded, ray tracing reproduces an average amplitude spread over regions of coherent constructive and destructive interference. This may be an important consideration for interpolating ray tracing results of longer wavelength waves such as magnetosonic, electromagnetic ion cyclotron, or ULF waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Detailed modeling of fission with F R E Y A

For many years, the state of the art for treating fission in radiation transport codes has involved sampling from average distributions. However, such “average” fission models have limited interaction-by-interaction capabilities. Energy is not explicitly conserved and no correlations are available because all particles are emitted isotropically and independently. However, in a true fission event, the energies, momenta and multiplicities of emitted particles are correlated. Such correlations are interesting for many modern applications, including detector development and detection of small amounts of special material. Recently, several Monte Carlo codes have become available that calculate complete fission events. Event-by-event techniques are particularly useful because it is possible to obtain the fission products as well as the prompt neutrons and photons emitted during an individual fission process, all with complete kinematic information. It is therefore possible to extract any desired correlation observables. Such codes, when included in broader Monte Carlo transport codes, such as MCNP, can be made broadly available to the community. One such code, FREYA (Fission Reaction Event Yield Algorithm), is particularly fast and can readily generate large samples of complete fission events. We briefly describe here the physics in FREYA and compare our results with relevant available data on prompt neutron and photon emission. We discuss correlated measurements in particular for validation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SHARP: A Spatially Higher-order, Relativistic Particle-in-cell Code

Numerical heating in particle-in-cell (PIC) codes currently precludes the accurate simulation of cold, relativistic plasma over long periods, severely limiting their applications in astrophysical environments. We present a spatially higher-order accurate relativistic PIC algorithm in one spatial dimension, which conserves charge and momentum exactly. We utilize the smoothness implied by the usage of higher-order interpolation functions to achieve a spatially higher-order accurate algorithm (up to the fifth order). We validate our algorithm against several test problems—thermal stability of stationary plasma, stability of linear plasma waves, and two-stream instability in the relativistic and non-relativistic regimes. Comparing our simulations to exact solutions of the dispersion relations, we demonstrate that SHARP can quantitatively reproduce important kinetic features of the linear regime. Our simulations have a superior ability to control energy non-conservation and avoid numerical heating in comparison to common second-order schemes. We provide a natural definition for convergence of a general PIC algorithm: the complement of physical modes captured by the simulation, i.e., those that lie above the Poisson noise, must grow commensurately with the resolution. This implies that it is necessary to simultaneously increase the number of particles per cell and decrease the cell size. We demonstrate that traditional ways for testing for convergence fail, leading to plateauing of the energy error. This new PIC code enables us to faithfully study the long-term evolution of plasma problems that require absolute control of the energy and momentum conservation.

79 ASTRONOMY AND ASTROPHYSICS↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗