Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Simulation of a PET system and study of some geometry parameters

The Monte Carlo simulation of small animal conventional positron emission tomography (PET) is an important tool for geometry parameters optimization, image reconstruction algorithm tests, performance of different radioisotopic sources and some others. The present work deals with the Monte Carlo study of a small cylindrical PET system in the framework of the GEANT4 code. Two different accepted ring width values and spherical sources of {sup 18}F and {sup 44}Sc isotopes were considered. Then, the improvement of the detection efficiency and spatial resolution was analyzed in all the cases.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Transrectal Array Configurations Optimized For Prostate HIFU Ablation

The objectives of this study were to evaluate and compare steering and ablation rates from several types of transrectal arrays operated at different frequencies for whole prostate ablation. Three-dimensional acoustic and thermal modeling (Rayleigh-Sommerfield and Penne's BHTE) were performed. Treatment volumes up to 70cc and anterior-posterior distances up to 6 cm were considered. The maximum transducer dimensions were constrained to 5 cm (along rectum) and 2.5 cm (elevation), and the channel count was limited to 256. Planar array configurations for truncated-annular, 1/1.5D, and 2D random arrays were evaluated at 1, 2, and 4 MHz for capability to treat the entire prostate. The acoustic intensity at the surface was fixed at 10 W/cm{sup 2}. The maximum temperature was restricted to 80 deg. C. The volumetric ablation rate was computed to compare the treatment times amongst different configurations. The 1.5D Planar array at 1 MHz ablated the whole prostate in the shortest amount of time while maintaining adequate steering. The higher frequency arrays required smaller elevation apertures for a fixed channel count to maintain a single focal spot at the desired location. Consequently, these arrays resulted in slower heating rates with increased near-field heating. The 1 MHz 1.5D array would also be advantageous compared to single-element transducers since only one mechanical degree of motion is required. This study demonstrates the selection of an optimal array geometry and frequency for transrectal HIFU, resulting in faster ablation rates and reduced treatment times.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A high-current light-ion injector for tandem accelerators

A dual-source injector for tandem accelerators to produce negative ion currents of H, D, and He has been developed and built. The system consists of a central vacuum enclosure that accommodates two multicusp ion sources. Beam currents of several mA of H{sup -} and D{sup -} have been obtained by direct negative extraction of one of the multicusp ion sources. The yield for He{sup -} was optimized applying differentially pumped vacuum sections that support space compensation in the He{sup +} transport section a well as low neutralization loss of He{sup -} after charge exchange. In addition, an optimized extraction geometry and beam transport system enabled in excess of 10 mA He{sup +} within the low acceptance of the charge exchange canal. Early measurements yielded {approx}50 {mu}A for He{sup -} using Li as a charge exchange medium, but currents over 100 {mu}A are anticipated if Na would be used.

43 PARTICLE ACCELERATORS↗

Active spectroscopic measurements of the bulk deuterium properties in the DIII-D tokamak (invited)

The neutral-beam induced D{sub {alpha}} emission spectrum contains a wealth of information such as deuterium ion temperature, toroidal rotation, density, beam emission intensity, beam neutral density, and local magnetic field strength magnitude Double-Vertical-Line B Double-Vertical-Line from the Stark-split beam emission spectrum, and fast-ion D{sub {alpha}} emission (FIDA) proportional to the beam-injected fast ion density. A comprehensive spectral fitting routine which accounts for all photoemission processes is employed for the spectral analysis. Interpretation of the measurements to determine physically relevant plasma parameters is assisted by the use of an optimized viewing geometry and forward modeling of the emission spectra using a Monte-Carlo 3D simulation code.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation and optimization of a 10 A electron gun with electrostatic compression for the electron beam ion source

Increasing the current density of the electron beam in the ion trap of the Electron Beam Ion Source (EBIS) in BNL's Relativistic Heavy Ion Collider facility would confer several essential benefits. They include increasing the ions' charge states, and therefore, the ions' energy out of the Booster for NASA applications, reducing the influx of residual ions in the ion trap, lowering the average power load on the electron collector, and possibly also reducing the emittance of the extracted ion beam. Here, we discuss our findings from a computer simulation of an electron gun with electrostatic compression for electron current up to 10 A that can deliver a high-current-density electron beam for EBIS. The magnetic field in the cathode-anode gap is formed with a magnetic shield surrounding the gun electrodes and the residual magnetic field on the cathode is (5 Division-Sign 6) Gs. It was demonstrated that for optimized gun geometry within the electron beam current range of (0.5 Division-Sign 10) A the amplitude of radial beam oscillations can be maintained close to 4% of the beam radius by adjusting the injection magnetic field generated by a separate magnetic coil. Simulating the performance of the gun by varying geometrical parameters indicated that the original gun model is close to optimum and the requirements to the precision of positioning the gun elements can be easily met with conventional technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heterogeneous metasurface for high temperature selective emission

We demonstrate selective emission from a heterogeneous metasurface that can survive repeated temperature cycling at 1300 K. Simulations, fabrication, and characterization were performed for a cross-over-a-backplane metasurface consisting of platinum and alumina layers on a sapphire substrate. The structure was stabilized for high temperature operation by an encapsulating alumina layer. The geometry was optimized for integration into a thermophotovoltaic (TPV) system, and was designed to have its emissivity matched to the external quantum efficiency spectrum of 0.6 eV InGaAs TPV material. We present spectral measurements of the metasurface that result in a predicted 22% optical-to-electrical power conversion efficiency in a simplified model at 1300 K. Furthermore, this broadly adaptable selective emitter design can be easily integrated into full-scale TPV systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Positron production at extreme light infrastructure – nuclear physics (ELI-NP)

Applied and material physics studies with positron beams of Fermi–surfaces, defects, interfaces etc. offer excellent diagnostics tools. At ELI-NP, an intense γ beam of about 10{sup 11} photons/s with energies up to 3.5 MeV will be used to generate a positron beam via pair production in a tungsten converter target. To obtain a high intensity beam of moderated positrons the design of the positron source is of high importance. The design of a dedicated positron source at ELI–NP is being investigated based on extensive GEANT4 simulations. The goal of the simulations is to optimize the geometry of the target and the gamma beam collimation. We present here the characteristics of the positron beam obtained for different geometries of the converter target.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gamma ray imager on the DIII-D tokamak

A gamma ray camera is built for the DIII-D tokamak [J. Luxon, Nucl. Fusion 42, 614 (2002)] that provides spatial localization and energy resolution of gamma flux by combining a lead pinhole camera with custom-built detectors and optimized viewing geometry. This diagnostic system is installed on the outer midplane of the tokamak such that its 123 collimated sightlines extend across the tokamak radius while also covering most of the vertical extent of the plasma volume. A set of 30 bismuth germanate detectors can be secured in any of the available sightlines, allowing for customizable coverage in experiments with runaway electrons in the energy range of 1–60 MeV. Commissioning of the gamma ray imager includes the quantification of electromagnetic noise sources in the tokamak machine hall and a measurement of the energy spectrum of background gamma radiation. First measurements of gamma rays coming from the plasma provide a suitable testbed for implementing pulse height analysis that provides the energy of detected gamma photons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

G4CEP: A G4 theory modification by including pseudopotential for molecules containing first-, second- and third-row representative elements

The G4CEP composite method was developed from the respective G4 all-electron version by considering the implementation of compact effective pseudopotential (CEP). The G3/05 test set was used as reference to benchmark the adaptation by treating in this work atoms and compounds from the first and second periods of the periodic table, as well as representative elements of the third period, comprising 440 thermochemical data. G4CEP has not reached a so high level of accuracy as the G4 all-electron theory. G4CEP presented a mean absolute error around 1.09 kcal mol{sup −1}, while the original method presents a deviation corresponding to 0.83 kcal mol{sup −1}. The similarity of the optimized molecular geometries between G4 and G4CEP indicates that the core-electron effects and basis set adjustments may be pointed out as a significant factor responsible for the large discrepancies between the pseudopotential results and the experimental data, or even that the all-electron calculations are more efficient either in its formulation or in the cancellation of errors. When the G4CEP mean absolute error (1.09 kcal mol{sup −1}) is compared to 1.29 kcal mol{sup −1} from G3CEP, it does not seem so efficient. However, while the G3CEP uncertainty is ±4.06 kcal mol{sup −1}, the G4CEP deviation is ±2.72 kcal mol{sup −1}. Therefore, the G4CEP theory is considerably more reliable than any previous combination of composite theory and pseudopotential, particularly for enthalpies of formation and electron affinities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of intense pulsed ion beam heated masked targets for extreme materials characterization

Intense, pulsed ion beams locally heat materials and deliver dense electronic excitations that can induce material modifications and phase transitions. Material properties can potentially be stabilized by rapid quenching. Pulsed ion beams with pulse lengths of order ns have recently become available for materials processing. Here, we optimize mask geometries for local modification of materials by intense ion pulses. The goal is to rapidly excite targets volumetrically to the point where a phase transition or local lattice reconstruction is induced followed by rapid cooling that stabilizes desired material's properties fast enough before the target is altered or damaged by, e.g., hydrodynamic expansion. By using a mask, the longitudinal dimension can be large compared to the transverse dimension, allowing the possibility of rapid transverse cooling. We performed HYDRA simulations that calculate peak temperatures for a series of excitation conditions and cooling rates of silicon targets with micro-structured masks and compare these to a simple analytical model. In conclusion, the model gives scaling laws that can guide the design of targets over a wide range of pulsed ion beam parameters.

36 MATERIALS SCIENCE↗

Current capabilities of the residual stress diffractometer at the high flux isotope reactor

The engineering diffractometer 2nd Generation Neutron Residual Stress Facility (NRSF2) at the Oak Ridge National Laboratory’s High Flux Isotope Reactor was built specifically for the mapping of residual strains. NRSF2 is optimized to investigate a wide range of engineering materials by providing the user a selection of monochromatic neutron wavelengths to maintain the selected Bragg reflection near 2θ = 90°, which is the optimal scattering geometry for strain mapping. Here in this work, details of the instrument configuration and operation are presented, and considerations for experimental planning are also discussed. Selected examples of recent residual stress work completed with NRSF2 are presented to highlight capabilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analytic gradients for the single-reference driven similarity renormalization group second-order perturbation theory

Herein we derive and implement analytic energy gradients for the single-reference driven similarity renormalization group second-order perturbation theory (DSRG-PT2). The resulting equations possess an asymptotic scaling that is identical to that of the second-order Møller–Plesset perturbation theory (MP2), indicating that the exponential regularizer in the DSRG equations does not introduce formal difficulties in the gradient theory. We apply the DSRG-PT2 method to optimizing the geometries of 15 small molecules. The equilibrium bond lengths computed with DSRG-PT2 are found similar to those of MP2, yielding a mean absolute error of 0.0033 Å and a standard deviation of 0.0045 Å when compared with coupled cluster with singles, doubles, and perturbative triples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of self-interaction error on electrostatic dipoles calculated using density functional theory

Spurious electron self-interaction in density functional approximations (DFAs) can lead to inaccurate predictions of charge transfer in heteronuclear molecules that manifest as errors in calculated electrostatic dipoles. Here we show the magnitude of these errors on dipoles computed for a diverse set of 47 molecules taken from the recent benchmark study of Hait and Head-Gordon. We compare results of Perdew-Wang local spin density approximation (PW92), Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA), and strongly constrained and appropriatedly normed (SCAN) meta-GGA dipole calculations, along with those of their respective self-interaction-corrected (SIC) counterparts, to reference values from accurate wave function-based methods. The SIC calculations were carried out using the Fermi-Löwdin orbital (FLO-SIC) approach. We find that correcting for self-interaction generally increases the degree of charge transfer, thereby increasing the size of calculated dipole moments. The FLO-SIC-PW92 and FLO-SIC-PBE dipoles are in better agreement with reference values than their uncorrected DFA counterparts, particularly for strongly ionic molecules where significant improvement is seen. Applying FLO-SIC to SCAN does not improve dipole values overall. In addition, we show that removing self-interaction improves the description of the dipole for stretched-bond geometries and recovers the physically correct separated atom limit of zero dipole. Finally, we find that the best agreement between the FLO-SIC-DFA and reference dipoles occurs when the molecular geometries are optimized using the FLO-SIC-DFA.

74 ATOMIC AND MOLECULAR PHYSICS↗

Fully variational incremental CASSCF

We report the complete-active-space self-consistent field (CASSCF) method is a canonical electronic structure theory that holds a central place in conceptualizing and practicing first principles simulations. For application to realistic molecules, however, the CASSCF must be approximated to circumvent its exponentially scaling computational costs. Applying the many-body expansion - also known as the method of increments - to CASSCF (iCASSCF) has been shown to produce a polynomially scaling method that retains much of the accuracy of the parent theory and is capable of treating full valence active spaces. Due to an approximation made in the orbital gradient, the orbital parameters of the original iCASSCF formulation could not be variationally optimized, which limited the accuracy of its nuclear gradient. Herein, a variational iCASSCF is introduced and implemented, where all parameters are fully optimized during energy minimization. This method is able to recover electronic correlations from the full valence space in large systems, produce accurate gradients, and optimize stable geometries as well as transition states. Demonstrations on challenging test cases, such as the oxoMn(salen)Cl complex with 84 electrons in 84 orbitals and the automerization of cyclobutadiene, show that the fully variational iCASSCF is a powerful tool for describing challenging molecular chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and fabrication of TiO 2 -based dye sensitized solar cells using plant-derived organic dyes

The utilization of solar energy, an abundant and renewable resource, shows great promise. Various technologies have been employed to capture this vast energy potential. In this study, the effectiveness of natural dye-sensitized solar cells (DSSCs) was explored through experimental and computational methods. Organic dyes derived from specific plant species were examined, with a solvent mixture of ethanol, methanol, and tetrahydrofuran used for extraction. A UV–vis spectrophotometer was utilized to measure the sensitizers’ optical characteristics. The study employed density functional theory (DFT), implemented in Gaussian 09 W software, to perform computational calculations. The B3LYP method and a basis set of 6-31G++(d,p) were chosen for optimizing the geometries and energetics of dye molecules. The DFT results indicated that the dye molecules had a bandgap in the range of 2.16–2.38 eV. The photochemical performance of all four fabricated DSSC-based devices was evaluated to be between 0.33% and 1.04%, and the Euryops pectinatus sensitizer demonstrated the highest efficiency of 1.04% among the studied sensitizers.

36 MATERIALS SCIENCE↗

Using additive manufacturing technologies in high-field accelerator magnet coils

Recent advances with additive manufacturing (AM) technologies using various materials allow them to be considered for the manufacture of precise and complicated metal parts of the magnet coils of high field accelerator magnets from aluminum bronze, titanium alloy, stainless steel, etc. The 3D printing technology is also being used to fabricate prototype models of real parts to test and optimize their geometry. This paper discusses the designs of the complex stress-management coil parts developed at Fermilab, their fabrication using AM technologies, and quality control methods and results.

36 MATERIALS SCIENCE↗

Distribution of cations in wurtzitic In x Ga 1-x N and In x Al 1-x N alloys: Consequences for energetics and quasiparticle electronic structures

The ternary, isostructural, wurtzite-derived group-III mononitride alloys In x Ga 1-x N andIn x Al 1-x N are reexamined within a cluster expansion approach. Using density functional theory together with the AM05 exchange-correlation functional, the total energies and the optimized atomic geometries of all 22 clusters classes of the cluster expansion for each material system are calculated. The computationally demanding calculation of the corresponding quasiparticle electronic structures is achieved for all cluster classes by means of a recently developed scheme to approximately solve the quasiparticle equation based on the HSE06 hybrid functional and the G₀W₀ approach. Using two different alloy statistics, the configurational averages for the lattice parameters, the mixing enthalpies, and the bulk moduli are calculated. The composition-dependent electronic structures of the alloys are discussed based on configurationally averaged electronic states, band gaps, and densities of states. Ordered cluster arrangements are found to be energetically rather unfavorable, however, they possess the smallest energy gaps and, hence, contribute to light emission. The influence of the alloy statistics on the composition dependencies and the corresponding bowing parameters of the band gaps is found to be significant and should, hence, lead to different signatures in the optical-absorption or -emission spectra.

de Carvalho, Luiz Cláudio↗