Search NASA⌕ Search

SEARCH · Search NASA

Results for “inexpensive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Plasma Deposition of Amorphous Silicon

Strongly adhering films of silicon are deposited directly on such materials as Pyrex and Vycor (or equivalent materials) and aluminum by a non-equilibrium plasma jet. Amorphous silicon films are formed by decomposition of silicon tetrachloride or trichlorosilane in the plasma. Plasma-jet technique can also be used to deposit an adherent silicon film on aluminum from silane and to dope such films with phosphorus. Ability to deposit silicon films on such readily available, inexpensive substrates could eventually lead to lower cost photovoltaic cells.

Calcote, H. F.↗
NASA NTRS1982

Detecting Cracks on Inner Surfaces

Microscopic cracks or flaws in surface of a workpiece are often detected with fluorescent dye. Dye is spread over surface to be inspected and then washed off. When piece is viewed under ultraviolet light, a glow is seen from dye trapped in any flaws. Intensity of fluorescence gives a rough indication of depth of defect. Fluorescent inspection procedure is fast, inexpensive and simple to perform.

Sax, A.↗
NASA NTRS1982

Lathe Attachment Finishes Inner Surface of Tubes

Extremely smooth finishes are machined on inside surfaces of tubes by new attachment for a lathe. The relatively inexpensive accessory, called a "microhone," holds a honing stone against workpiece by rigid tangs instead of springs as in conventional honing tools. Inner rod permits adjustment of microhoning stone, while outer tube supports assembly. Outer tube is held between split blocks on lathe toolpost. Microhoning can be done with either microhone or workpiece moving and other member stationary.

Lancki, A. J.↗
NASA NTRS1982

Removing Defects From Silicon Ribbon

Proposal for removing impurities from silicon ribbon and sheet could be developed into an automated production-line process. New technique which combines ion-cluster bombardment, electron-gun heating, and plasma etching, could be key step in fabricating inexpensive solar-cell arrays. Silicon sheets and ribbons treated this way could have enhanced carrier lifetimes necessary for satisfactory solar-cell performance.

Shimada, K.↗
NASA NTRS1982

Crucible Grows Wide Silicon Ribbon

Inexpensive manufacture of solar cells may require quality silicon ribbon crystals. One way to produce them is by growing wide dendritic webs, which can be very long and have high structural perfection. Dendrites grow from supercooled melt, so width of ribbon depends on how wide a region of supercooled molten silicon can be maintained in crucible. Elongated geometry of suscepter/crucible/lid assembly allows molten silicon to supercool over a wider region -- a necessary condition for the growth of wide dendritic crystal ribbon.

Seidensticker, R.↗
NASA NTRS1982

Speedy Acquisition of Surface-Contamination Samples

Biological contamination of large-area surfaces can be determined quickly, inexpensively, and accurately with the aid of a polyester bonded cloth. Cloth is highly effective in removing microbes from a surface and releasing them for biological assay. In releasing contaminants, polyester bonded cloth was found to be superior to other commercial cleanroom cloths, including spun-bound polyamid cloths and cellulose cloths.

Puleo, J. R.↗
NASA NTRS1982

Easily Assembled Reflector for Solar Concentrators

Reflectors for concentrating solar collectors are assembled quickly and inexpensively by method that employs precontoured supports, plastic film, and adhesive to form a segmented glass mirror. New method is self-focusing, and does not require skilled labor at any stage. Contoured ribs support film and mirror segments of reflector. Nine mirror segments are bonded to sheet. Combined mirror surface closely approximates a spherical surface with a radius of curvature of 36 inches (0.91 m).

Bouquet, F. L.↗
NASA NTRS1982

Test-Bed Aircraft Scanner

Test-bed aircraft multispectral scanner (TBAMS) is line-scanning multispectral imaging system with eight visible/near-infrared channels and one thermal-infrared channel. Key design features of TBAMS are its large size and modular subsystem mounted on horizontal baseplate. This unique layout allows easy access to and replacement of subsystems and their subcomponents. System designed around existing inexpensive parts, sacrifices compactness for ease of modification.

Jobson, D. J.↗
NASA NTRS1982

Coal as a Substitute for Carbon Black

New proposal shows sprayed coal powder formed by extrusion of coal heated to plastic state may be inexpensive substitute for carbon black. Carbon black is used extensively in rubber industry as reinforcing agent in such articles as tires and hoses. It is made from natural gas and petroleum, both of which are in short supply.

Kushida, R. O.↗
NASA NTRS1982

Small Fixture Strains Composites for Environmental Tests

Fixture for long-term strain tests of composites is based on inexpensive tool for repairing motorcycle chains. (In normal use tool forces rivet out of chain element.) As modified for composite testing, tool has precision screw and shim. Qualification tests for graphite/epoxy composites are made less expensive by simple test fixture. Used in quantity, fixtures apply precisely similar loads to many samples.

Tervet, F. W.↗
NASA NTRS1982

Gage for Surface Waviness

New device gives qualitive readings of flatness, curvature, or waviness of surface. Designed to check for waviness in surface of Space Shuttle prior to installation of heat-resistant tiles, it could be used to measure regularity or irregularity of other surfaces. Irregularities are measured by noting readings of three dial indicators on simple, inexpensive instruments.

Williams, G. W.↗
NASA NTRS1980

Next generation communications satellites: Multiple access and network studies

Following an overview of issues involved in the choice of promising system architectures for efficient communication with multiple small inexpensive Earth stations serving hetergeneous user populations, performance evaluation via analysis and simulation for six SS/TDMA (satellite-switched/time-division multiple access) system architectures is discussed. These configurations are chosen to exemplify the essential alternatives available in system design. Although the performance evaluation analyses are of fairly general applicability, whenever possible they are considered in the context of NASA's 30/20 GHz studies. Packet switched systems are considered, with the assumption that only a part of transponder capacit is devoted to packets, the integration of circuit and packet switched traffic being reserved for further study. Three types of station access are distinguished: fixed (FA), demand (DA), and random access (RA). Similarly, switching in the satellite can be assigned on a fixed (FS) or demand (DS) basis, or replaced by a buffered store-and-forward system (SF) onboard the satellite. Since not all access/switching combinations are practical, six systems are analyzed in detail: three FS SYSTEMS, FA/FS, DA/ES, RA/FS; one DS system, DA/DS; and two SF systems, FA/SF, DA/SF. Results are presented primarily in terms of delay-throughput characteristics.

Stern, T. E.↗
NASA NTRS1980

Measurements of interactions between acoustic fields and nonuniform mean flow

Two problems crucial to the stability of longitudinal acoustic waves in solid rocket motors were examined experimentally. The first is the dissipation of energy associated with an average flow inward at the lateral boundary. Measurements reported here, though subject to considerable experimental error, show that the actual losses are much larger than predicted by the approximate one dimensional analysis. The second problem is the attenuation of waves accompanying reflection by the nonuniform flow in a choked exhaust nozzle. Emphasis on technique, to provide data relatively easily and inexpensively. It appears that good results can be obtained in a routine manner using small supersonic wind tunnel operated as an open cycle. At least for Mach numbers up to 0.04 at the nozzle entrance, difficulties with signal/noise are satisfactorily overcome with a tracking filter.

Magiawala, K.↗
NASA NTRS1975

Remote sensing of water quality in reservoirs and lakes in semi-arid climates

Overlake measurements using aerial cameras (remote sensing) combined with water truth collected from boats most economically provided wide-band photographs rather than precise spectra. With use of false color infrared film (400-950 nm), the reflected spectral signatures seen from hundreds to thousands of meters above the lake merged to produce various color tones. Such colors were easily and inexpensively obtained and could be recognized by lake management personnel without any prior training. The characteristic spectral signatures of various algal types were also recognizable in part by the color tone produced by remote sensing.

Anderson, H. M.↗
NASA NTRS1981

Evaluation and verification of epitaxial process sequence for silicon solar-cell production

Several process sequences are shown to be of potentially low cost and to perform effectively when applied to the high quality silicon crystals for which they were developed. The extent to which such process sequences can also perform effectively when applied to lower cost thin film solar cells formed by epitaxial deposition of Si on potentially inexpensive substrates of upgraded metallurgical grade Si was investigated.

Redfield, D.↗
NASA NTRS1980

Novel duplex vapor-electrochemical method for silicon solar cells

A process was developed for the economic production of high purity Si from inexpensive reactants, based on the Na reduction of SiF4 gas. The products of reaction (NaF, Si) are separated by either aqueous leaching or by direct melting of the NaF-Si product mixture. Impurities known to degrade solar cell performance are all present at sufficiently low concentrations so that melt solidification (e.g., Czochralski) will provide a silicon material suitable for solar cells.

Nanis, L.↗
NASA NTRS1981

Satellite-aided coastal zone monitoring and vessel traffic system

The development and demonstration of a coastal zone monitoring and vessel traffic system is described. This technique uses a LORAN-C navigational system and relays signals via the ATS-3 satellite to a computer driven color video display for real time control. Multi-use applications of the system to search and rescue operations, coastal zone management and marine safety are described. It is emphasized that among the advantages of the system are: its unlimited range; compatibility with existing navigation systems; and relatively inexpensive cost.

Baker, J. L.↗
NASA NTRS1981

Burst statistics of Viterbi decoding

A mathematical model of Viterbi decoder burst error performance is presented. This model allows for computer generation of Viterbi-like error sequences quickly and inexpensively for applications where large amounts of data are required. The model is corroborated through comparisons with actual software decoder simulations.

Deutsch, L. J.↗