Search NASA⌕ Search

SEARCH · Search NASA

Results for “methods - statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Acoustic Treatment Design Scaling Methods: Numerical Simulation of the Nonlinear Acoustic Impedance of a Perforated Plate Single-Degree-of-Freedom Resonator Using a Time-Domain Finite Difference Method - Volume 4

Single-degree-of-freedom resonators consisting of honeycomb cells covered by perforated facesheets are widely used as acoustic noise suppression liners in aircraft engine ducts. The acoustic resistance and mass reactance of such liners are known to vary with the intensity of the sound incident upon the panel. Since the pressure drop across a perforated liner facesheet increases quadratically with the flow velocity through the facesheet, this is known as the nonlinear resistance effect. In the past, two different empirical frequency domain models have been used to predict the Sound Pressure Level effect of the incident wave on the perforated liner impedance, one that uses the incident particle velocity in isolated narrowbands, and one that models the particle velocity as the overall velocity. In the absence of grazing flow, neither frequency domain model is entirely accurate in predicting the nonlinear effect that is measured for typical perforated sheets. The time domain model is developed in an attempt to understand and improve the model for the effect of spectral shape and amplitude of multi-frequency incident sound pressure on the liner impedance. A computer code for the time-domain finite difference model is developed and predictions using the models are compared to current frequency-domain models.

Kraft, R. E.↗
NASA NTRS1996

Pilot Program for the Development of Classification and Accuracy Assessment Methods and Improved Accessibility for Landsat and Related GIS Data and Technology Transfer of These Methods to State and Local Governments

This project has a single, comprehensive objective that is manifested in many tangible products and impacts throughout the state and the mid-south region. The primary objective or mission of this project is to expose the broadest possible cross-section of public sector decision makers responsible for developing and maintaining policy at the state, local and national levels, private sector professionals and students to the power, flexibility and utility of sensor based imagery and the mapping and interpretive products that are derived from these digital geodata. In accomplishing this mission this project has worked to provide hands-on exposure and training to primary and secondary teachers; developed and distributed instructional materials to students across the state; created an on-line archive of satellite images and related geographic data; implemented a service that enables users throughout the region and around the world to develop customized mapping products suitable for visualization and/or decision support from the comfort of their classroom or office via an internet connection to our facility; extended the use of sensor based imagery in natural resource management and commercial applications through a range of pilot research initiatives, demonstrations, presentations and professional papers.

Limp, W. Fredrick↗
NASA NTRS1991

Method for the determination of lignin content of a sample by flash pyrolysis in an atmosphere of hydrogen or helium and method therefor

The lignin content of wood, paper pulp or other material containing lignin (such as filter paper soaked in black liquor) is more readily determined by flash pyrolysis of the sample at approximately 550.degree. C. in a reducing atmosphere of hydrogen or in an inert atmosphere of helium followed by a rapid analysis of the product gas by a mass spectrometer. The heated pyrolysis unit as fabricated comprises a small platinum cup welded to an electrically-heated stainless steel ribbon with control means for programmed short duration (1.5 sec, approximately) heating and means for continuous flow of hydrogen or helium. The pyrolysis products enter an electron-ionization mode mass spectrometer for spectral evaluation. Lignin content is obtained from certain ratios of integrated ion currents of many mass spectral lines, the ratios being linearly related to the Kappa number of Klason lignin.

Shakkottai, Parthasarathy↗
DOE OSTI2017

Catalytic biomass conversion methods, catalysts, and methods of making the same

Described herein are processes for one-step delignification and hydrodeoxygenation of lignin fraction a biomass feedstock. The lignin feedstock is derived from by-products of paper production and biorefineries. Additionally described is a process for converting biomass-derived oxygenates to lower oxygen-content compounds and/or hydrocarbons in the liquid or vapor phase in a reactor system containing hydrogen and a catalyst comprised of a hydrogenation function and/or an oxophilic function and/or an acid function. Finally, also described herein is a process for converting biomass-derived oxygenates to lower oxygen-content compounds and/or hydrocarbons in the liquid or vapor phase in a reactor system containing hydrogen and a catalyst comprised of a hydrogenation function and/or an oxophilic function and/or an acid function.

09 BIOMASS FUELS↗
DOE OSTI2018

Boron-based dual imaging probes, compositions and methods for rapid aqueous F-18 labeling, and imaging methods using same

A composition useful as a PET and/or fluorescence imaging probe a compound a compound of Formula I, including salts, hydrates and solvates thereof: ##STR00001## wherein R.sub.1-R.sub.7 may be independently selected from hydrogen, halogen, hydroxy, alkoxy, nitro, substituted and unsubstituted amino, cycloalkyl, carboxy, carboxylic acids and esters thereof, cyano, haloalkyl, aryl, X is selected from the group consisting of C and N; and A is selected of hydrogen, halogen, hydroxy, alkoxy, nitro, substituted and unsubstituted amino, alkyl, cycloalkyl, carboxy, carboxylic acids and esters thereof, cyano, haloalkyl, aryl, including phenyl and aminophenyl, and heteroaryl.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Nanodevice, method of making the same, and method of using the same

A nanodevice provides for electric-field control of magnon-QSD interactions. The nanodevice includes a ferroelectric substrate, a ferromagnetic material disposed over the ferroelectric substrate, and a nanodiamond including an ensemble of nitrogen-vacancy (NV) spins, each NV magnetically interfacing with the ferromagnetic material. An electric field is measured by applying a voltage across the ferroelectric substrate and the ferromagnetic material, changing a magnon excitation spectrum of the ferromagnetic material with respect to an electron spin resonance frequency of the ensemble of NV spins, and measuring a relaxation rate of the ensemble of NV spins.

Shalaev, Vladimir M.↗
DOE OSTI2019

Strong Stability Preserving Integrating Factor Two-Step Runge-Kutta Methods

In this report, problems with components that feature significantly different time scales, where the stiff time-step restriction comes from a linear component, implicit-explicit (IMEX) methods alleviate this restriction if the concern is linear stability. However, when nonlinear non-inner-product stability properties are of interest, such as in the evolution of hyperbolic partial differential equations with shocks or sharp gradients, linear inner-product stability is no longer sufficient for convergence, and so strong stability preserving (SSP) methods are often needed. Where the SSP property is needed, IMEX SSP Runge-Kutta (SSP-IMEX) methods have very restrictive time-steps. An alternative to SSP-IMEX schemes is to adopt an integrating factor approach to handle the linear component exactly and step the transformed problem forward using some time-evolution method. The strong stability properties of integrating factor Runge-Kutta methods were established in Isherwood et al. (SIAM J Numer Anal 56(6):3276–3307, 2018), where it was shown that it is possible to define explicit integrating factor Runge-Kutta methods that preserve strong stability properties satisfied by each of the two components when coupled with forward Euler time-stepping. It was proved that the solution will be SSP if the transformed problem is stepped forward with an explicit SSP Runge-Kutta method that has non-decreasing abscissas. However, explicit SSP Runge-Kutta methods have an order barrier of p=4, and sometimes higher order is desired. In this work we consider explicit SSP two-step Runge-Kutta integrating factor methods to raise the order. We show that strong stability is ensured if the two-step Runge-Kutta method used to evolve the transformed problem is SSP and has non-decreasing abscissas. We find such methods up to eighth order and present their SSP coefficients. Adding a step allows us to break the fourth order barrier on explicit SSP Runge-Kutta methods; furthermore, our explicit SSP two-step Runge-Kutta methods with non-decreasing abscissas typically have larger SSP coefficients than the corresponding one-step methods. A selection of our methods are tested for convergence and demonstrate the design order. We also show, for selected methods, that the SSP time-step predicted by the theory is a lower bound of the allowable time-step for linear and nonlinear problems that satisfy the total variation diminishing (TVD) condition. We compare some of the non-decreasing abscissa SSP two-step Runge-Kutta methods to previously found methods that do not satisfy this criterion on linear and nonlinear TVD test cases to show that this non-decreasing abscissa condition is indeed necessary in practice as well as theory. We also compare these results to our SSP integrating factor Runge-Kutta methods designed in Isherwood et al. (2018).

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2007

Implementation of Leak Test Methods for the International Space Station (ISS) Elements, Systems and Components

The International Space Station (ISS has Qualification and Acceptance Environmental Test Requirements document, SSP 41172 that includes many environmental tests such as Thermal vacuum & Cycling, Depress/Repress, Sinusoidal, Random, and Acoustic Vibration, Pyro Shock, Acceleration, Humidity, Pressure, Electromatic Interference (EMI)/Electromagnetic Compatibility (EMCO), etc. This document also includes (13) leak test methods for Pressure Integrity Verification of the ISS Elements, Systems, and Components. These leak test methods are well known, however, the test procedure for specific leak test method shall be written and implemented paying attention to the important procedural steps/details that, if omitted or deviated, could impact the quality of the final product and affect the crew safety. Such procedural steps/details for different methods include, but not limited to: - Sequence of testing, f or example, pressurization and submersion steps for Method I (Immersion); - Stabilization of the mass spectrometer leak detector outputs fo r Method II (vacuum Chamber or Bell jar); - Proper data processing an d taking a conservative approach while making predictions for on-orbit leakage rate for Method III(Pressure Change); - Proper Calibration o f the mass spectrometer leak detector for all the tracer gas (mostly Helium) Methods such as Method V (Detector Probe), Method VI (Hood), Method VII (Tracer Probe), Method VIII(Accumulation); - Usage of visibl ility aides for Method I (Immersion), Method IV (Chemical Indicator), Method XII (Foam/Liquid Application), and Method XIII (Hydrostatic/Visual Inspection); While some methods could be used for the total leaka ge (either internal-to-external or external-to-internal) rate requirement verification (Vacuum Chamber, Pressure Decay, Hood, Accumulation), other methods shall be used only as a pass/fail test for individual joints (e.g., welds, fittings, and plugs) or for troubleshooting purposes (Chemical Indicator, Detector Probe, Tracer Probe, Local Vacuum Chamber, Foam/Liquid Application, and Hydrostatic/Visual Inspection). Any isolation of SSP 41172 requirements have led to either retesting of hardware or accepting a risk associated with the potential system or component pressure integrity problem during flight.

Underwood, Steve↗