Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

InGaN/GaN quantum wells for polariton laser diodes: Role of inhomogeneous broadening

Contrary to the case of III-nitride based visible light-emitting diodes for which the inhomogeneous linewidth broadening characteristic of InGaN-based multiple quantum well (MQW) heterostructures does not appear as a detrimental parameter, such a broadening issue can prevent a microcavity (MC) system entering into the strong light-matter coupling regime (SCR). The impact of excitonic disorder in low indium content (x ∼ 0.1) In{sub x}Ga{sub 1–x}N/GaN MQW active regions is therefore investigated for the subsequent realization of polariton laser diodes by considering both simulations and optical characterizations. It allows deriving the requirements for such MQWs in terms of absorption, emission linewidth, and Stokes shift. Systematic absorption-like and photoluminescence (PL) spectroscopy experiments are performed on single and multiple In{sub 0.1}Ga{sub 0.9}N/GaN quantum wells (QWs). Micro-PL mappings reveal a low temperature PL linewidth of ∼30 meV, compatible with SCR requirements, for single QWs for which the microscopic origin responsible for this broadening is qualitatively discussed. When stacking several InGaN/GaN QWs, a departure from such a narrow linewidth value and an increase in the Stokes shift are observed. Various possible reasons for this degradation such as inhomogeneous built-in field distribution among the QWs are then identified. An alternative solution for the MC design to achieve the SCR with the InGaN alloy is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sidewall passivation for InGaN/GaN nanopillar light emitting diodes

We studied the effect of sidewall passivation on InGaN/GaN multiquantum well-based nanopillar light emitting diode (LED) performance. In this research, the effects of varying etch rate, KOH treatment, and sulfur passivation were studied for reducing nanopillar sidewall damage and improving device efficiency. Nanopillars prepared under optimal etching conditions showed higher photoluminescence intensity compared with starting planar epilayers. Furthermore, nanopillar LEDs with and without sulfur passivation were compared through electrical and optical characterization. Suppressed leakage current under reverse bias and four times higher electroluminescence (EL) intensity were observed for passivated nanopillar LEDs compared with unpassivated nanopillar LEDs. The suppressed leakage current and EL intensity enhancement reflect the reduction of non-radiative recombination at the nanopillar sidewalls. In addition, the effect of sulfur passivation was found to be very stable, and further insight into its mechanism was gained through transmission electron microscopy.

36 MATERIALS SCIENCE↗

Highly uniform, multi-stacked InGaAs/GaAs quantum dots embedded in a GaAs nanowire

We demonstrate a highly uniform, dense stack of In{sub 0.22}Ga{sub 0.78}As/GaAs quantum dot (QD) structures in a single GaAs nanowire (NW). The size (and hence emission energy) of individual QD is tuned by careful control of the growth conditions based on a diffusion model of morphological evolution of NWs and optical characterization. By carefully tailoring the emission energies of individual QD, dot-to-dot inhomogeneous broadening of QD stacks in a single NW can be as narrow as 9.3 meV. This method provides huge advantages over traditional QD stack using a strain-induced Stranski-Krastanow growth scheme. We show that it is possible to fabricate up to 200 uniform QDs in single GaAs NWs using this growth technique without degradation of the photoluminescence intensity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimized scalable stack of fluorescent solar concentrator systems with bifacial silicon solar cells

In this paper, we present a concentrator system based on a stack of fluorescent concentrators (FCs) and a bifacial solar cell. Coupling bifacial solar cells to a stack of FCs increases the performance of the system and preserves its efficiency when scaled. We used an approach to optimize a fluorescent solar concentrator system design based on a stack of multiple fluorescent concentrators (FC). Seven individual fluorescent collectors (20 mm×20 mm×2 mm) were realized by in-situ polymerization and optically characterized in regard to their ability to guide light to the edges. Then, an optimization procedure based on the experimental data of the individual FCs was carried out to determine the stack configuration that maximizes the total number of photons leaving edges. Finally, two fluorescent concentrator systems were realized by attaching bifacial silicon solar cells to the optimized FC stacks: a conventional system, where FC were attached to one side of the solar cell as a reference, and the proposed bifacial configuration. It was found that for the same overall FC area, the bifacial configuration increases the short-circuit current by a factor of 2.2, which is also in agreement with theoretical considerations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PCTFE as a solution to birefringence in atom trap viewports

We have developed and characterized optical viewports with the glass-to-metal seal made by the plastic PCTFE (polychlorotrifluoroethylene). The goal is to reduce stress-induced birefringence while maintaining ultra-high vacuum compatibility. We have maintained a Stokes parameter S{sub 3} of 0.9986, and achieved <5 × 10{sup −11} Torr partial pressure of air. We have also measured the diffusion and permeation of helium through PCTFE and placed upper limits on nitrogen, oxygen, and argon permeation, as PCTFE has been suggested as an o-ring for transport of environmental noble gas samples, though we know of no other noble gas measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of Ga-doping on the properties of ZnO nanowire

Arrays of single-crystal zinc oxide (ZnO) nanowires have been synthesized on silicon substrates by vapor-liquid-solid growth techniques. The effect of growth conditions including substrate temperature and Ar gas flow rate on growth properties of ZnO nanowire arrays were studied. Structural and optical characterization was performed using scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. SEM images of the ZnO nanowire arrays grown at various Ar gas flow rates indicated that the alignment and structural features of ZnO nanowires were affected by the gas flow rate. The PL of the ZnO nanowire arrays exhibited strong ultraviolet (UV) emission at 380 nm and green emission around 510 nm. Moreover, the green emission reduced in Ga-doped sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

C ion-implanted TiO{sub 2} thin film for photocatalytic applications

Third-generation TiO{sub 2} photocatalysts were prepared by implantation of C{sup +} ions into 110 nm thick TiO{sub 2} films. An accurate structural investigation was performed by Rutherford backscattering spectrometry, secondary ion mass spectrometry, X-ray diffraction, Raman-luminescence spectroscopy, and UV/VIS optical characterization. The C doping locally modified the TiO{sub 2} pure films, lowering the band-gap energy from 3.3 eV to a value of 1.8 eV, making the material sensitive to visible light. The synthesized materials are photocatalytically active in the degradation of organic compounds in water under both UV and visible light irradiation, without the help of any additional thermal treatment. These results increase the understanding of the C-doped titanium dioxide, helpful for future environmental applications.

36 MATERIALS SCIENCE↗

Structural and optical investigations of oxygen defects in zinc oxide nanoparticles

ZnO nanoparticles (NPs) were prepared implementing chemical precipitation method. Structural and optical characterizations of synthesized ZnO NPs were thoroughly probed applying X-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive X-ray (EDX) analysis, X-ray photoelectron spectroscopy (XPS), UV- Visible absorption and fluorescence (FL) spectroscopy. The XRD and TEM analyses revealed hexagonal wurtzite phase with 25-30 nm size. EDX analysis indicated oxygen (O) rich composition of nanoparticles. In accordance with EDX, XPS analysis verifies O{sub i} rich stoichiometry of prepared NPs. Furthermore, concurrence of lattice oxygen (O{sub L}), interstitial oxygen (O{sub i}) and oxygen vacancy (V{sub O}) in ZnO NPs was demonstrated through XPS analysis. Size quantization of nanoparticles is evident by blue shift of UV-Visible absorption energy. The FL spectroscopic investigations ascertain the existence of several discrete and defect states and radiative transitions occurring therein. Display of visible emission from oxygen defect states and most importantly, excess of O{sub i} defects in prepared ZnO nanoparticles, was well established through FL study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on structural, optical and magnetic properties of double perovskite Gd{sub 2}NiMnO{sub 6}

Single phase double perovskite Gd{sub 2}NiMnO{sub 6} was prepared by conventional solid state reaction route. X-ray diffraction (XRD) result reveals that the compound possess monoclinic structure with space group P2{sub 1}/n. Optical characterization performed at room temperature via UV-visible spectroscopy confirms Gd{sub 2}NiMnO{sub 6} as a direct band-gap material with band gap of ∼1.5 eV. Magnetization measurement in Zero field cooled (ZFC) condition at H = 100 Oe shows magnetic transition at ∼ 125 K. Due to competing interactions between magnetic ions (Ni{sup 2+} and Mn{sup 4+}), we could observe two magnetic transition below 40 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental evidence of hot carriers solar cell operation in multi-quantum wells heterostructures

We investigated a semiconductor heterostructure based on InGaAsP multi quantum wells (QWs) using optical characterizations and demonstrate its potential to work as a hot carrier cell absorber. By analyzing photoluminescence spectra, the quasi Fermi level splitting Δμ and the carrier temperature are quantitatively measured as a function of the excitation power. Moreover, both thermodynamics values are measured at the QWs and the barrier emission energy. High values of Δμ are found for both transition, and high carrier temperature values in the QWs. Remarkably, the quasi Fermi level splitting measured at the barrier energy exceeds the absorption threshold of the QWs. This indicates a working condition beyond the classical Shockley-Queisser limit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement in the photocurrent collection due to enhanced absorption of light by synthesizing staggered layers of silver nanoclusters in silicon

The quest for increased efficiency of solar cells has driven the research in synthesizing photovoltaic cells involving Si based materials. The efficiency of solar cells involving crystalline Si is stalled around 25% for the last decade. Recently Shi et al. had shown that light trapping can be enhanced by fabricating double layers of Ag nanoparticles in silicon based materials. The light trapping is critically important in a photo devices such as solar cells in order to increase light absorption and efficiency. In the present work, we report enhancement in the absorption of light in Ag ion implanted Si substrates. Multiple low energies Ag ions, ranging from ∼80 keV to ∼30 keV, with different fluences ranging from ∼1 × 10{sup 16} to ∼1 × 10{sup 17} atoms/cm{sup 2} were sequentially implanted into commercially available Si (100) substrates followed by post-thermal annealing to create different sizes of Ag nanoclusters (NC) at different depths in the top 100 nm of the Si. The absorbance of light is increased in Ag implanted Si with a significant increase in the current collection in I-V (current-voltage) photo switching measurements. The experimental photovoltaic cells fabricated with the Ag-implanted Si samples were optically characterized under AM (air mass) 1.5 solar radiation conditions (∼1.0 kW/m{sup 2}). An enhancement in the charge collection were measured in the annealed samples, where prominent Ag NCs were formed in the Si matrix compared to the as-implanted samples with amorphous layers. We believe the enhancement of the photo-current density from the samples with Ag NC is due to the improvement of efficiency of charge collection of e{sup −}-h{sup +} pairs produced by the incident light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-transferred MoS{sub 2}/GaN PN diodes

Electrical and optical characterization of two-dimensional/three-dimensional (2D/3D) p-molybdenum disulfide/n-gallium nitride (p-MoS{sub 2}/n-GaN) heterojunction diodes are reported. Devices were fabricated on high-quality, large-area p-MoS{sub 2} grown by chemical vapor deposition on sapphire substrates. The processed devices were transferred onto GaN/sapphire substrates, and the transferred films were characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). On-axis XRD spectra and surface topology obtained from AFM scans were consistent with previously grown high-quality, continuous MoS{sub 2} films. Current-voltage measurements of these diodes exhibited excellent rectification, and capacitance-voltage measurements were used to extract a conduction band offset of 0.23 eV for the transferred MoS{sub 2}/GaN heterojunction. This conduction band offset was confirmed by internal photoemission measurements. The energy band lineup of the MoS{sub 2}/GaN heterojunction is proposed here. This work demonstrates the potential of 2D/3D heterojunctions for novel device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solid immersion lenses for enhancing the optical resolution of thermal and electroluminescence mapping of GaN-on-SiC transistors

Solid immersion lenses (SILs) are shown to greatly enhance optical spatial resolution when measuring AlGaN/GaN High Electron Mobility Transistors (HEMTs), taking advantage of the high refractive index of the SiC substrates commonly used for these devices. Solid immersion lenses can be applied to techniques such as electroluminescence emission microscopy and Raman thermography, aiding the development device physics models. Focused ion beam milling is used to fabricate solid immersion lenses in SiC substrates with a numerical aperture of 1.3. A lateral spatial resolution of 300 nm is demonstrated at an emission wavelength of 700 nm, and an axial spatial resolution of 1.7 ± 0.3 μm at a laser wavelength of 532 nm is demonstrated; this is an improvement of 2.5× and 5×, respectively, when compared with a conventional 0.5 numerical aperture objective lens without a SIL. These results highlight the benefit of applying the solid immersion lenses technique to the optical characterization of GaN HEMTs. Further improvements may be gained through aberration compensation and increasing the SIL numerical aperture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of local field and inherent strain in reflectance anisotropy spectra of A{sup III}B{sup V} semiconductors with naturally oxidized surfaces

Reflectance anisotropy (RA) spectra of naturally oxidized (001) surfaces of GaAs and InAs crystals are measured for photon energies from 1.5 up to 5.5 eV. The differential high-accuracy RA spectra reveal features substantially different from those caused by either a reconstruction of clean surface or a built-in near-surface electric field. Models of atomic structure with anisotropic transition layers of excess arsenic atoms specific for GaAs(001)/oxide and InAs(001)/oxide interfaces are proposed. In conformity with these models, a general theory of reflectance anisotropy is developed for semiconductor/oxide interfaces within the Green's function technique. The theory takes into account the combined effect of local field due to interface dipoles and of intrinsic near-surface strain of the crystal. Measured RA spectra are analyzed in the model of valence-bond dipoles occupying a rectangular lattice in a multilayer medium. Comparing the measured and calculated spectra, we conclude that RA spectra of oxidized GaAs(001) and InAs(001) surfaces are simultaneously influenced by interface and near-surface anisotropies. The former is responsible for the broad-band spectral features which are associated with polarizability of the valence bonds attached to As atoms at the crystal/oxide interface. The near-surface anisotropy is due to inherent uniaxial straining the near-surface region of crystal. The effect of strain on RA spectra is experimentally and theoretically substantiated for GaAs crystal wafers undergone a uniaxial applied stress. Basically, this work results in the following. It establishes the physical nature of different levels of RA spectra observed in a majority of papers, but never analyzed. It demonstrates how the studied features of RA spectra could be applied for optical characterization of strained interfaces and atomic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of selenium and chlorine co-passivation in polycrystalline CdSeTe devices

CdTe-based solar cell efficiency has rapidly improved over the last few years. Some of the reasons have been a change to the absorber composition including the incorporation of selenium, and better front contact and emitter materials in CdTe photovoltaic devices. In addition to the increase in short-circuit current by reducing the bandgap, Se plays other important roles in passivation of defects thus improving the conversion efficiency of CdSeTe/CdTe graded absorber photovoltaic devices. Here, we combine structural and optical characterizations with first principles calculations to investigate the role of Se and Cl segregation in CdSeTe devices. We find that in the presence of Se and Cl, the minority carrier lifetime improves due to a reduction of midgap defect states. Here, we also correlate this effect with defect passivation in CdSeTe devices and suggest innovative ways to further improve CdTe-based photovoltaic efficiency.

14 SOLAR ENERGY↗

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting “giant” quantum dots

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. In this work, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. In particular, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy “CdZnSSe/ZnS” core/shell QDs prepared in a single-pot reaction. In a separate step, thick (~6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less “graded” in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. Thus, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-resolution optical micro-spectroscopy extending from the near-infrared to the vacuum-ultraviolet

Optical characterization of small samples over a wide spectral range with rapid data acquisition is essential for the analysis of many material systems, such as 2D van der Waals layers and their heterostructures. In this paper, we present the design and implementation of a tabletop micro-spectroscopy system covering the near-infrared to the vacuum-ultraviolet (1.2 eV–6.8 eV or ~1.0 μm to 185 nm) using mostly off-the-shelf components. It can measure highly reproducible local reflectance spectra with a total integration time of a few minutes and a full-width-half-maximum spot size of 2.7 by 5.6 μm. For precise positioning, the design also allows simultaneous monitoring of the measurement location and the wide-field image of the sample. We demonstrate ultra-broadband reflectance spectra of exfoliated thin flakes of several wide-gap 2D materials, including ZnPS 3 , hexagonal BN, and Ca(OH) 2 .

47 OTHER INSTRUMENTATION↗

High-Fidelity Velocity and Concentration Measurements of Turbulent Buoyant Jets

Accurate models of turbulent buoyant flows are essential for the design of the cooling circuit of nuclear reactors and passive safety systems. However, available models fail to fully capture the physics of turbulent mixing when buoyancy becomes predominant with respect to momentum. Therefore, high-fidelity experiments of well-controlled fundamental flows are needed to develop and validate more accurate models. We analyze experiments of positive and negative turbulent buoyant jets, both in uniform and stratified environments, with the aim of understanding the thermal hydraulics of turbulent mixing with variable density and providing high-fidelity data for the development and validation of turbulence models. Non-intrusive, simultaneous particle image velocimetry and laser-induced fluorescence measurements were carried out to acquire instantaneous velocity and concentration fields on a vertical section parallel to the axis of a jet in the self-similar region. The refractive index matching method was applied to measure high-resolution buoyant jets with up to 8.6% density difference. These data are free of the typical errors that characterize optical measurements of buoyancy-driven flows (e.g. natural and mixed convection) where the refractive index of the fluid is inhomogeneous throughout the measurement domain. Turbulent statistics and entrainment of buoyant jets in uniform and stratified environments are presented. These data are compared with non-buoyant jets in a uniform environment, as a reference to investigate the effects of buoyancy and stratification on turbulent mixing. The results will be used for the assessment of current turbulence models and as a basis for the development of a new model that captures turbulent mixing.

laser induced fluorescence↗