SEARCH · Search NASA

Results for “orthogonal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1972

A simplified correlation technique for position location using earth satellites.

To derive range to a moving vehicle for surveillance and navigation purposes, the phase delays in sets of sinusoidal tones may be measured using synchronous satellites for signal relay. When the number of users is large, problems of rapid acquisition and measurement occur in multiple-access systems. This paper describes the selection and processing of an orthogonal tone set which has several useful features. The paper also presents a simulation of a simplified digital technique for the noise-free case, as well as for a composite signal buried in wideband noise. The digital simulation is also modified to include the proposed 'hard limiting' or clipping technique.

Martin, S. C.↗

NASA NTRS1972

Dual deflectable beam strip engine development.

This paper describes a dual beam thruster that has been designed, constructed, and tested. The system is suitable for two-axes attitude control and is comprised of two orthogonal strips, each capable of producing 0.30 mlb thrust and beam deflections of more than plus or minus 20 deg. The nominal specific impulse for the thruster is 5000 sec, and the thrust level from each strip can be varied from 0 to 100%. Neutralizer filaments that were developed and life tested over 2000 hours producing more than 40 mA of electron emission per watt of input power are also discussed. The system power required for clean ionizers is approximately 200 W.

Dulgeroff, C. R.↗

NASA NTRS1971

Photometric intensity and polarization measurements of the solar corona.

Use of a satellite photometric observatory (SPO) to measure the solar corona from Miahuatlan, Mexico during the Mar. 7, 1970, total eclipse of the sun. The SPO is equipped with a 24-in. Cassegrainian telescope, a four-channel photoelectric photometer, a Wollaston prism, and a rotating half-wave plate. Simultaneous measurements were made of the two orthogonal components of coronal light in the B and R bands of the UBVRI system. A 1-minute arc aperture was scanned from the lunar disk center out to five solar radii in a series of spirals of gradually increasing radius. For the first time, simultaneous multicolor intensity, degree, and angle of polarization profiles are computed from photoelectric measurements. Comparison of the variations of the measurements for each spiral scan yield a detailed picture of the intensity and polarization features in the K corona.

Mcdougal, D. S.↗

NASA NTRS1972

Relations between Haar and Walsh/Hadamard transforms.

Relations between the Haar and Walsh/Hadamard (W/H) transforms, which are proved, show that for some applications the Haar transform performs as well as, and faster than, the W/H transform. These relations yield a family of orthogonal transforms including the Haar and W/H transforms with a common fast algorithm.

Fino, B. J.↗

NASA NTRS1972

Gyro and accelerometer failure detection and identification in redundant sensor systems.

An algorithm for failure detection and identification for redundant non-orthogonal arrays of single degree of freedom gyros and accelerometers is described which is optimum in the sense that detection occurs as soon as it is no longer possible to account for the instrument outputs as the outputs of good instruments operating within their noise tolerances, and identification occurs as soon as it is true that only a particular instrument failure could account for the actual instrument outputs within the noise tolerance of good instruments. An estimation algorithm is described which minimizes the maximum possible error magnitude for the given set of instrument outputs. Monte Carlo simulation results are presented for the application of the algorithms to an inertial reference unit consisting of six gyros and six accelerometers in two alternate configurations.

Potter, J. E.↗

NASA NTRS1972

Numerical construction of the Hill functions.

As an aid in the numerical construction of Hill functions and their derivatives, an algorithm using local coordinates and an expansion in Legendre polynomials is proposed. The algorithm is shown to possess sufficient stability, and the orthogonality of the Legendre polynomials simplifies the computation when the Ritz-Galerkin technique is used.

Segethova, J.↗

NASA NTRS1972

The transverse Poisson's ratio of composites.

An expression is developed that makes possible the prediction of Poisson's ratio for unidirectional composites with reference to any pair of orthogonal axes that are normal to the direction of the reinforcing fibers. This prediction appears to be a reasonable one in that it follows the trends of the finite element analysis and the bounding estimates, and has the correct limiting value for zero fiber content. It can only be expected to apply to composites containing stiff, circular, isotropic fibers bonded to a soft matrix material.

Foye, R. L.↗

NASA NTRS1972

Sound propagation in duct shear layers.

Consideration of the propagation of sound in a two-dimensional inviscid shear layer for given initial sound pressure profiles. The eigenvalue problem resulting from an assumption of separable solutions in a form first obtained by Pridmore-Brown (1958) is solved numerically. It is shown that although the resulting eigenfunctions cannot be proven to be orthogonal or complete, they can be combined by a least total error squared method to give a good representation of the initial pressure profile. The acoustic pressure in the duct is then easily calculated. The results verify all the predictions made in an earlier perturbation calculation. Moreover, they show that the refraction effect gets saturated at high subsonic Mach numbers and at high frequencies. The proposed technique may be used, if necessary, with impedance boundary conditions at the duct walls.

Shankar, P. N.↗

NASA NTRS1972

Phenocryst fabric in lunar basalt sample 12052 from the Ocean of Storms.

Pyroxene phenocrysts in Apollo 12 sample 12052, a porphyritic basalt, have a weak, planar preferred orientation and a lineation as determined by crystal-elongation measurements and universal-stage measurements in orthogonal thin sections. The structures are probably the result of laminar flow. Numerous vugs and the flow foliation in sample 12052 suggest crystallization as a surface flow or a near-surface sill. Flowage appears to have ceased by the time of crystallization of the variolitic groundmass of the sample. The fabric data suggest a two-stage crystallization of sample 12052.

Greenwood, W. R.↗

NASA NTRS1973

Laser velocimeter for simultaneous two-dimensional velocity measurements

Laser velocimeter provides simultaneous orthogonal measurements in manner which minimizes many problems attending prior systems, and allows spatial traversing of flowfield in order to obtain velocity profiles. Velocimeter permits rapid interrogation of unsteady flows where area of interest is of the order of one meter in extent and flow does not vary appreciably over time of about one second.

Orloff, K. L.↗

NASA NTRS1973

Photography of random motion with a holographic camera

Three-dimensional system uses two additional mirrors and path compensators. It is essentially three mutually-orthogonal one-dimensional systems with common focus. Laser beam is split into four parts, three of which are object beams; and fourth is reference beam. Size of each ellipse depends on magnitude of velocity vectors.

Kurtz, R. L.↗

NASA NTRS1972

A magnetic control system for attitude acquisition

A spacecraft magnetic attitude acquisition system is reported that is capable of automatically despinning a satellite from arbitrarily high rates around any axis and provides terminal orientation that makes capture by conventional fine control attitude control systems routine. The system consists of a 3-axis magnetometer, a set of 3 orthogonal magnets, and appropriate control logic. A well-configured system results in despin times of the order of 5 orbits per rpm for spacecraft in low earth orbits. Following despin, terminal orientation is achieved after another one to three orbits, depending on the capture range of the associated fine control system.

Stickler, A. C.↗

NASA NTRS1972

Magnetic control assembly qualification model

Fabrication and testing of the magnetic control assembly (MCA) are summarized. The MCA was designed as an add-on unit for certain existing components of the Nimbus and ERTS attitude control system. The MCA system consists of three orthogonal electromagnets; a magnetometer probe capable of sensing external fields in the X, Y, and Z axes; and the control electronics. An operational description of the system is given along with all major drawings and photographs. Manufacturing and inspection procedures are outlined and a chronological list of events is included with the fabrication summary.

Shen, R. C.↗

NASA NTRS1973

Topology of induced lunar magnetic fields

Using the asymmetric theory of lunar induction the total and induced magnetic field line structure within the Moon and the diamagnetic cavity were obtained. Total field distributions are shown for orientations of the oscillating interplanetary field parallel, perpendicular and at 45 deg to the cavity axis. Induced field lines are shown only for the orientations of the interplanetary field parallel and orthogonal to the cavity axis. When compared with the field lines derived using the long wavelength limit of spherically symmetric vacuum induction theory, the configurations obtained using the asymmetric theory exhibit significant distortion. For all orientations of the interplanetary field, the field lines are strongly compressed on the sunlit hemisphere because of the confining solar wind pressure at the lunar surface and the exclusion of the field by the lunar core.

Schwartz, K.↗

NASA NTRS1973

High pressure space suit glove

The High Pressure Space Suit Glove Program yielded one prototype glove assembly with an operating pressure of 8.0 psi. The following developments are reported: (1) A new layup technique for incorporation of the mini-convolute systems; (2) modification in the mini-convolute construction to assure cycle life at 8.0 psi in excess of 100,000 cycles; (3) the development of a unique non-orthogonal low torque wrist joint; (4) the development of a low torque single axis joint for use in the thumb and finger first metacarpal joints; and (5) a number of approaches to 1st metacarpal joints were fabricated and tested to establish the joint technqiues.

Elkins, W.↗

NASA NTRS1971

General test plan redundant sensor strapdown IMU evaluation program

The general test plan for a redundant sensor strapdown inertial measuring unit evaluation program is presented. The inertial unit contains six gyros and three orthogonal accelerometers. The software incorporates failure detection and correction logic and a land vehicle navigation program. The principal objective of the test is a demonstration of the practicability, reliability, and performance of the inertial measuring unit with failure detection and correction in operational environments.

Hartwell, T.↗

NASA NTRS1973

A unified development of several techniques for the representation of random vectors and data sets

Linear vector space theory is used to develop a general representation of a set of data vectors or random vectors by linear combinations of orthonormal vectors such that the mean squared error of the representation is minimized. The orthonormal vectors are shown to be the eigenvectors of an operator. The general representation is applied to several specific problems involving the use of the Karhunen-Loeve expansion, principal component analysis, and empirical orthogonal functions; and the common properties of these representations are developed.

Bundick, W. T.↗

NASA NTRS1973

Multi axes vibration fixtures

A simplified technique and apparatus are described for testing the effects of vibration on various material specimen. Particular attention was given to tests along the orthogonal vibrational planes in order to prove the strength of the item under extraordinary conditions to which it will be subjected.

Sims, C. R.↗