Search NASA⌕ Search

SEARCH · Search NASA

Results for “outgassing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Long-term weathering effects on the thermal performance of the Libbey-Owens-Ford (liquid) solar collector

Thermal performance tests were conducted on the Libbey-Owens-Ford liquid collector, following long term exposure to natural weathering conditions. Visual inspection of the collector, prior to the retest, indicated noticeable clouding of the inner cover glass, probably resulting from outgassing of the insulation. The absorber plate also showed some discoloration. The test results indicated that performance degradation had occurred at inlet temperatures significantly above ambient. The change in the slope of the efficiency curve, from the original data, is a direct indicator of an increase in the collector heat loss coefficient.

Source record↗

A facility for the simulation of environmental parameters and qualification of flight thermal coatings

There is a continuing interest and need for investigation and development of, various paints, coatings, multi-layer insulation, and electrically conductive paints and coatings used for thermal control and electrical discharge of spacecraft surfaces. Degradation of these surfaces by solar-wind energy particles and ultraviolet irradiation, as well as contamination by the outgassing of materials used in conjunction or close proximity to these surfaces, continues to be a matter of concern. The following is a description of a facility with the capability of evaluating the synergistic effects encountered in the space environment. Actual flight qualification programs are also described.

Paczkowski, F. N.↗

Venus lower atmospheric composition - Analysis by gas chromatography

The first gas chromatographic analysis of the lower atmosphere of Venus is reported. Three atmospheric samples were analyzed. The third of these samples showed carbon dioxide (96.4 percent), molecular nitrogen (3.41 percent), water vapor (0.135 percent), molecular oxygen (69.3 ppm), argon (18.6 ppm), neon (4.31 ppm), and sulfur dioxide (186 ppm). The amounts of water vapor and sulfur dioxide detected are roughly compatible with the requirements of greenhouse models of the high surface temperature of Venus. The large positive gradient of sulfur dioxide, molecular oxygen, and water vapor from the cloud tops to their bottoms, as implied by Earth-based observations and these results, gives added support for the presence of major quantities of aqueous sulfuric acid in the clouds. A comparison of the inventory of inert gases found in the atmospheres of Venus, Earth, and Mars suggests that these components are due to outgassing from the planetary interiors.

Oyama, V. I.↗

Fan-shaped coma, orientation of rotation axis, and surface structure of a cometary nucleus. I - Test of a model on four comets

Pronounced anisotropy in the outgassing from comets, especially from short-period ones, appears to be a factor responsible for the frequent occurrence of a fan-shaped coma, extending in the general direction of the sun. It is suggested that the pattern of deviations from the sunward direction contains information on the orientation of the spin axis and on the time lag in the sublimation process, which in turn provides insight into the nature of the nuclear surface. A simple model of a spherical rotating nucleus is formulated and a trial-and-error technique is devised to determine the axis-orientation constants and a lag angle, a measure of the time lag in units of the rotation period. The method is applied to the comets Encke, Tempel 2, Borrelly, and Schwassmann-Wachmann 3.

Sekanina, Z.↗

The impact of gas-surface reactions on mass spectrometric measurements of atomic nitrogen

The paper presents a simplified model of the ion source chemistry, explains several details of the data reduction method used in obtaining atomic-nitrogen (N) densities from OSS data, and discusses implications of gas-surface reactions for the design of future satellite-borne mass spectrometers. Because of various surface reactions, N appears in three different forms in the ion source, as N, NO, and NO2. Considering the rather small spin modulation of NO and NO2 in the semi-open ionization chamber used in the OSS instrument, it is not surprising that these reaction products have not been previously identified in closed source instruments as a measure of the presence of atomic nitrogen. Warmup and/or outgassing of the ion source are shown to drastically reduce the NO2 concentration, thereby making possible reliable measurement of ambient N densities.

Engebretson, M. J.↗

Relative motions of fragments of the split comets. III - A test of splitting and comets with suspected multiple nuclei

A quantitative test of splitting for comets with suspected multiple nuclei has been formulated using a model which assumes the motions of cometary fragments to be due primarily to outgassing. The model expresses the relative motion of the cometary fragments in terms of the time of splitting and the differential force, which are determined by measurements of the position angle and the separation distance between fragments. The test is applied to 18 comets suspected of having multiple nuclei, of which the comets Sawerthal 1888 I, Campbell 1914 IV, Whipple-Fedtke-Tevzadze 1943 I, Honda 1955 V, Wild 1968 III and Tago-Sato-Kosaka 1969 IX were found to be clear cases of split comets and Davidson 1889 IV and Periodic Giacobini 1896 V were judged to be likely candidates. At least three of the secondary nuclei confirmed can be classified as short-lived companions, while only two appear to be persistent.

Sekanina, Z.↗

Laser /39/Ar-/40/Ar dating of two clasts from consortium breccia 73215

A laser Ar-39-Ar-40 study of the components of an ANT-suite anorthositic gabbro and a black aphanite from a consortium breccia is reported. A wide range of K-Ar ages is found for the plagioclase in the anorthositic gabbro; at the centers of the largest grains is material showing the greatest age (older than 4.11 billion years) while the youngest material (3.81-3.88 billion years) is found near the grain margins. Partial outgassing of the clasts upon incorporation into the breccia could account for the age patterns. The black aphanite clast appears to be cogenetic with the aphanite that forms the breccia matrix. The time of crystallization of a lunar granite has also been measured by the laser technique.

Eichhorn, G.↗

Collimation of high-speed flow with thermal spread losses

The operation of the neutral beam collimator designed for the mass spectrometer inlet system of the Space Shuttle Induced Environment Contamination Monitor system is discussed. The collimator will allow selective views of a 10 deg half-angle conical volume of space so that backscattered molecules from within this volume can be measured and related to the column densities of outgassing species. Gas molecules which enter the collimator but do not have a view from the entrance orifice to the exit are directed to a gas getter and eliminated. The loss of properly directed molecules in the collimator due to their thermal distribution is calculated for the case of a directed flow, which would occur when the collimator is pointed in the direction of motion of the spacecraft. Inlet to outlet flux ratios are also computed as a function of angle of attack.

Taeusch, D. R.↗

Effects of hydraulic fluid CVCM on silver-Teflon

Changes in the solar absorptance of silver-Teflon (Ag/FEP) surfaces were measured after contamination by the outgassing products of hydraulic fluid and irradiation by solar simulators. Although radiator surfaces are selected for stability to the solar ultraviolet and particulate environment, contaminant deposition and their interaction with solar exposure can degrade their performance. The test procedure to deposit the hydraulic fluid collected volatile condensible material (CVCM), irradiate, and determine solar absorptance changes by reflectance measurements using a spectrophotometer and a solar simulator is described. The tests showed that for the estimated deposition rates on the Ag/FEP, the hydraulic fluid CVCM fraction remaining under normal conditions (above -40 C) would not degrade its performance. The residual CVCM can be easily removed from Ag/FEP by wiping with a solvent saturated flannel. The changes in solar absorptance with the CVCM film thickness and the radiation exposure duration are reported, concluding that vacuum ultraviolet radiation did not prevent easy removal of CVCM.

Muscari, J. A.↗

Identification of gaseous SO2 and new upper limits for other gases on Io

The identification of gaseous sulfur dioxide on Io by Voyager 1 is reported, and preliminary upper limits for other atmospheric gases are presented. Averaged spectra taken by the Voyager IRIS experiment in the range of 1,000 to 1,200/cm are interpreted as containing three fundamental sulfur dioxide bands, with intensities most nearly corresponding to an atmospheric model with a sulfur dioxide abundance of 0.2 cm atm. Upper limits for COS, CS2, SO3, H2S, CO2, O3, N2O, H2O, CH4, NH3 and HC1, not detected in the spectra, were calculated on the basis of the radiative transfer equation for temperatures of 130 and 250 K; a depletion of hydrogen, carbon and nitrogen is noted. It is suggested that a SO2 outgassing from a cooling sulfur extrusion is the major source of the observed atmospheric SO2.

Pearl, J.↗

A test program for solar collectors

Rigorous environmental and performance tests qualify solar collector for use in residential solar-energy systems. Testing over 7 month period examined pressurized effects, wind and snow loading, hail damage, solar and thermal degradation, effects of pollutants, efficiency, and outgassing. Test procedures and results are summarized in tables, graphs, and text.

Source record↗

All-inorganic spark-chamber frame

Outgassing is reduced by using ceramic and glass materials exclusively. Frames are assembled from four beams with rabbeted ends. Only ceramic or glass adhesives are used, and printed circuit is applied by screen printing directly on beams. Inorganic frames provide stable spark-chamber operation without gas refill, useful in terrestrial gamma-ray studies, in high-energy physics research, and other applications.

Heslin, T. M.↗

Transducer for extreme temperatures and pressures

Transducer with limits of 500 C and 10 kilobars responds to mechanical vibrations up to 20 kHz. Vibration pickup performs well in nuclear reactors, turbines, and other extreme environments. Low pressure problems of outgassing and "virtual" leakage experienced with conventional transducers potted in epoxy are eliminated with use of glass and metal supports. Interior opens to atmosphere, preventing buildup of pressure-induced stresses. Spring holds transducer against housing, reducing strain distortion.

Nadler, H.↗

Assessment of shuttle payloads gaseous environment contamination and its control

A prediction is given of the in-orbit gaseous environment and the contamination it could produce on cryogenic and room temperature surfaces of payloads in the shuttle bay. The time varying environment was obtained by the superposition of the calculated shuttle environment for a discrete time and payload induced environments measured in large space chambers. Representative contaminant surface accretions were calculated for flights 1 week and 1 month long for payloads having the largest source of outgassing and an orbit of 200 km. A number of calculations were based on the magnitude of the sources, the molecular natures, the decay rate with time, the sticking coefficients, the view factors, and the temperatures of the surfaces being contaminated. Significant results are reported.

Scialdone, J. J.↗

Notes on the origin of the Trojan asteroids

The dynamic plausibility of various ideas on the origin of the Trojans is briefly discussed. We take the point of view that the present, tightly bound population has secularly evolved through some mechanism from less to more tightly bound orbit configurations. The mechanisms considered are changes in the Jovian mass or semimajor axis during planetary formation, collisional interactions with external, asteroidal material, and cometary outgassing.

Yoder, C. F.↗

Scanning Auger Microprobe and atomic absorption studies of lunar volcanic volatiles

Results on lunar volatile transport processes have been obtained by studying green and brown glass droplets, orange and black core tube samples and the surface sample 74241 with the Scanning Auger Microprobe (SAM) and by Flameless Atomic Absorption Analysis (FLAA). SAM analyses show that the most dominant volatiles in the top few atomic layers of droplets are Zn and S, confirming that the surface Zn and S are good indicators of pyroclastic origin, and they are not entirely present as ZnS. In addition, FLAA thermal release profiles show that almost all the Zn and Cd are on grain surfaces, indicating that Zn and Cd were completely outgassed from lava fountain products during the volcanic eruption, were recondensed during or after the eruptions, and are thus present as surface coating.

Cirlin, E. H.↗

Brief note for consideration of active seismic exploration on Mars

Considerable controversy has arisen regarding the existence of water and water ice below the surface of Mars. Results of laboratory internal friction measurements on strongly outgassed rocks, recently made as part of an effort to interpret the high seismic Q values observed in the lunar crust, show that moisture absorbed in pores and cracks causes the low Q values. Unfortunately, the Viking seismology investigation found a surprisingly inactive planet. This note makes the case for active seismic exploration in order to ascertain the existence of liquid water in the crust from Q determinations.

Tittmann, B. R.↗